MIPS: Netlogic: Use PIC timer as a clocksource

The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC
frequencey. One of these can be used as a clocksource to provide
timestamps that is common across cores. This can be used in place
of the count/compare clocksource which is per-CPU.

On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits
of the PIC counter. On XLP, the whole 64-bit can be used.

Provide common macros and functions for PIC timer registers on XLR/XLS
and XLP, and use them to register a PIC clocksource.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4786/
Signed-off-by: John Crispin <blogic@openwrt.org>

2 files changed, 55 insertions, 5 deletions

diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
index b2e53a5383a..ea6768c3e9f 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
@@ -261,6 +261,8 @@
 #define PIC_LOCAL_SCHEDULING		1
 #define PIC_GLOBAL_SCHEDULING		0
 
+#define PIC_CLK_HZ			133333333
+
 #define nlm_read_pic_reg(b, r)	nlm_read_reg64(b, r)
 #define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
 #define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node))
@@ -315,6 +317,12 @@ nlm_pic_read_timer(uint64_t base, int timer)
 	return nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
 }
 
+static inline uint32_t
+nlm_pic_read_timer32(uint64_t base, int timer)
+{
+	return (uint32_t)nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
+}
+
 static inline void
 nlm_pic_write_timer(uint64_t base, int timer, uint64_t value)
 {
@@ -376,9 +384,9 @@ nlm_pic_ack(uint64_t base, int irt_num)
 }
 
 static inline void
-nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt)
+nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en)
 {
-	nlm_pic_write_irt_direct(base, irt, 0, 0, 0, irq, hwt);
+	nlm_pic_write_irt_direct(base, irt, en, 0, 0, irq, hwt);
 }
 
 int nlm_irq_to_irt(int irq);
diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h
index 9a691b1f91b..effa3377ded 100644
--- a/arch/mips/include/asm/netlogic/xlr/pic.h
+++ b/arch/mips/include/asm/netlogic/xlr/pic.h
@@ -35,10 +35,11 @@
 #ifndef _ASM_NLM_XLR_PIC_H
 #define _ASM_NLM_XLR_PIC_H
 
-#define PIC_CLKS_PER_SEC		66666666ULL
+#define PIC_CLK_HZ			66666666
 /* PIC hardware interrupt numbers */
 #define PIC_IRT_WD_INDEX		0
 #define PIC_IRT_TIMER_0_INDEX		1
+#define PIC_IRT_TIMER_INDEX(i)		((i) + PIC_IRT_TIMER_0_INDEX)
 #define PIC_IRT_TIMER_1_INDEX		2
 #define PIC_IRT_TIMER_2_INDEX		3
 #define PIC_IRT_TIMER_3_INDEX		4
@@ -99,6 +100,7 @@
 
 /* PIC Registers */
 #define PIC_CTRL			0x00
+#define PIC_CTRL_STE			8	/* timer enable start bit */
 #define PIC_IPI				0x04
 #define PIC_INT_ACK			0x06
 
@@ -251,12 +253,52 @@ nlm_pic_ack(uint64_t base, int irt)
 }
 
 static inline void
-nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt)
+nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en)
 {
 	nlm_write_reg(base, PIC_IRT_0(irt), (1u << hwt));
 	/* local scheduling, invalid, level by default */
 	nlm_write_reg(base, PIC_IRT_1(irt),
-		(1 << 30) | (1 << 6) | irq);
+		(en << 30) | (1 << 6) | irq);
+}
+
+static inline uint64_t
+nlm_pic_read_timer(uint64_t base, int timer)
+{
+	uint32_t up1, up2, low;
+
+	up1 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer));
+	low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+	up2 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer));
+
+	if (up1 != up2) /* wrapped, get the new low */
+		low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+	return ((uint64_t)up2 << 32) | low;
+
+}
+
+static inline uint32_t
+nlm_pic_read_timer32(uint64_t base, int timer)
+{
+	return nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+}
+
+static inline void
+nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu)
+{
+	uint32_t up, low;
+	uint64_t pic_ctrl = nlm_read_reg(base, PIC_CTRL);
+	int en;
+
+	en = (irq > 0);
+	up = value >> 32;
+	low = value & 0xFFFFFFFF;
+	nlm_write_reg(base, PIC_TIMER_MAXVAL_0(timer), low);
+	nlm_write_reg(base, PIC_TIMER_MAXVAL_1(timer), up);
+	nlm_pic_init_irt(base, PIC_IRT_TIMER_INDEX(timer), irq, cpu, 0);
+
+	/* enable the timer */
+	pic_ctrl |= (1 << (PIC_CTRL_STE + timer));
+	nlm_write_reg(base, PIC_CTRL, pic_ctrl);
 }
 #endif
 #endif /* _ASM_NLM_XLR_PIC_H */