MIPS: Alchemy: abstract USB block control register access

Alchemy chips have one or more registers which control access
to the usb blocks as well as PHY configuration.  I don't want
the OHCI/EHCI glues to know about the different registers and bits;
new code hides the gory details of USB configuration from them.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Patchwork: https://patchwork.linux-mips.org/patch/2709/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 drivers/usb/host/alchemy-common.c

3 files changed, 23 insertions, 115 deletions

diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index 347980e79a8..6652a237b92 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -88,12 +88,12 @@ static const struct dma_dev {
 	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR },	/* AC97 RX c */
 	{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC },	/* UART3_TX */
 	{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
-	{ AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
-	{ AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
-	{ AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
 	/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
 	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC},	/* I2S TX */
 	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 9ec85597bbf..bdd6651e9a4 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -47,7 +47,6 @@
  * We only have to save/restore registers that aren't otherwise
  * done as part of a driver pm_* function.
  */
-static unsigned int sleep_usb[2];
 static unsigned int sleep_sys_clocks[5];
 static unsigned int sleep_sys_pinfunc;
 static unsigned int sleep_static_memctlr[4][3];
@@ -55,31 +54,6 @@ static unsigned int sleep_static_memctlr[4][3];
 
 static void save_core_regs(void)
 {
-#ifndef CONFIG_SOC_AU1200
-	/* Shutdown USB host/device. */
-	sleep_usb[0] = au_readl(USB_HOST_CONFIG);
-
-	/* There appears to be some undocumented reset register.... */
-	au_writel(0, 0xb0100004);
-	au_sync();
-	au_writel(0, USB_HOST_CONFIG);
-	au_sync();
-
-	sleep_usb[1] = au_readl(USBD_ENABLE);
-	au_writel(0, USBD_ENABLE);
-	au_sync();
-
-#else	/* AU1200 */
-
-	/* enable access to OTG mmio so we can save OTG CAP/MUX.
-	 * FIXME: write an OTG driver and move this stuff there!
-	 */
-	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
-	au_sync();
-	sleep_usb[0] = au_readl(0xb4020020);	/* OTG_CAP */
-	sleep_usb[1] = au_readl(0xb4020024);	/* OTG_MUX */
-#endif
-
 	/* Clocks and PLLs. */
 	sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
 	sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -123,22 +97,6 @@ static void restore_core_regs(void)
 	au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
 	au_sync();
 
-#ifndef CONFIG_SOC_AU1200
-	au_writel(sleep_usb[0], USB_HOST_CONFIG);
-	au_writel(sleep_usb[1], USBD_ENABLE);
-	au_sync();
-#else
-	/* enable access to OTG memory */
-	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
-	au_sync();
-
-	/* restore OTG caps and port mux. */
-	au_writel(sleep_usb[0], 0xb4020020 + 0);	/* OTG_CAP */
-	au_sync();
-	au_writel(sleep_usb[1], 0xb4020020 + 4);	/* OTG_MUX */
-	au_sync();
-#endif
-
 	/* Restore the static memory controller configuration. */
 	au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
 	au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index f260ebed713..3b0a1e774dc 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -245,6 +245,15 @@ void alchemy_sleep_au1000(void);
 void alchemy_sleep_au1550(void);
 void au_sleep(void);
 
+/* USB: drivers/usb/host/alchemy-common.c */
+enum alchemy_usb_block {
+	ALCHEMY_USB_OHCI0,
+	ALCHEMY_USB_UDC0,
+	ALCHEMY_USB_EHCI0,
+	ALCHEMY_USB_OTG0,
+};
+int alchemy_usb_control(int block, int enable);
+
 
 /* SOC Interrupt numbers */
 
@@ -687,7 +696,8 @@ enum soc_au1200_ints {
  */
 
 #define AU1000_AC97_PHYS_ADDR		0x10000000 /* 012 */
-#define AU1000_USBD_PHYS_ADDR		0x10200000 /* 0123 */
+#define AU1000_USB_OHCI_PHYS_ADDR	0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR	0x10200000 /* 0123 */
 #define AU1000_IC0_PHYS_ADDR		0x10400000 /* 01234 */
 #define AU1000_MAC0_PHYS_ADDR		0x10500000 /* 023 */
 #define AU1000_MAC1_PHYS_ADDR		0x10510000 /* 023 */
@@ -710,12 +720,17 @@ enum soc_au1200_ints {
 #define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 34 */
 #define AU1000_MACDMA0_PHYS_ADDR	0x14004000 /* 0123 */
 #define AU1000_MACDMA1_PHYS_ADDR	0x14004200 /* 0123 */
+#define AU1550_USB_OHCI_PHYS_ADDR	0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR	0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR	0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR	0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR	0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR	0x14022000 /* 4 */
 
 
 #ifdef CONFIG_SOC_AU1000
 #define	MEM_PHYS_ADDR		0x14000000
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	USBH_PHYS_ADDR		0x10100000
 #define	IRDA_PHYS_ADDR		0x10300000
 #define	SSI0_PHYS_ADDR		0x11600000
 #define	SSI1_PHYS_ADDR		0x11680000
@@ -729,7 +744,6 @@ enum soc_au1200_ints {
 #ifdef CONFIG_SOC_AU1500
 #define	MEM_PHYS_ADDR		0x14000000
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	USBH_PHYS_ADDR		0x10100000
 #define PCI_PHYS_ADDR		0x14005000
 #define PCI_MEM_PHYS_ADDR	0x400000000ULL
 #define PCI_IO_PHYS_ADDR	0x500000000ULL
@@ -745,7 +759,6 @@ enum soc_au1200_ints {
 #ifdef CONFIG_SOC_AU1100
 #define	MEM_PHYS_ADDR		0x14000000
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	USBH_PHYS_ADDR		0x10100000
 #define	IRDA_PHYS_ADDR		0x10300000
 #define	SSI0_PHYS_ADDR		0x11600000
 #define	SSI1_PHYS_ADDR		0x11680000
@@ -760,7 +773,6 @@ enum soc_au1200_ints {
 #ifdef CONFIG_SOC_AU1550
 #define	MEM_PHYS_ADDR		0x14000000
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	USBH_PHYS_ADDR		0x14020000
 #define PCI_PHYS_ADDR		0x14005000
 #define PE_PHYS_ADDR		0x14008000
 #define PSC0_PHYS_ADDR		0x11A00000
@@ -783,8 +795,6 @@ enum soc_au1200_ints {
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
 #define AES_PHYS_ADDR		0x10300000
 #define CIM_PHYS_ADDR		0x14004000
-#define USBM_PHYS_ADDR		0x14020000
-#define	USBH_PHYS_ADDR		0x14020100
 #define PSC0_PHYS_ADDR	 	0x11A00000
 #define PSC1_PHYS_ADDR	 	0x11B00000
 #define LCD_PHYS_ADDR		0x15000000
@@ -868,21 +878,6 @@ enum soc_au1200_ints {
 #define USB_EHCI_LEN		0x100
 #define USB_UDC_BASE		0x14022000
 #define USB_UDC_LEN		0x2000
-#define USB_MSR_BASE		0xB4020000
-#define USB_MSR_MCFG		4
-#define USBMSRMCFG_OMEMEN	0
-#define USBMSRMCFG_OBMEN	1
-#define USBMSRMCFG_EMEMEN	2
-#define USBMSRMCFG_EBMEN	3
-#define USBMSRMCFG_DMEMEN	4
-#define USBMSRMCFG_DBMEN	5
-#define USBMSRMCFG_GMEMEN	6
-#define USBMSRMCFG_OHCCLKEN	16
-#define USBMSRMCFG_EHCCLKEN	17
-#define USBMSRMCFG_UDCCLKEN	18
-#define USBMSRMCFG_PHYPLLEN	19
-#define USBMSRMCFG_RDCOMB	30
-#define USBMSRMCFG_PFEN 	31
 
 #define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
 
@@ -963,51 +958,6 @@ enum soc_au1200_ints {
 #define USB_OHCI_LEN		0x00100000
 #endif
 
-#ifndef CONFIG_SOC_AU1200
-
-/* USB Device Controller */
-#define USBD_EP0RD		0xB0200000
-#define USBD_EP0WR		0xB0200004
-#define USBD_EP2WR		0xB0200008
-#define USBD_EP3WR		0xB020000C
-#define USBD_EP4RD		0xB0200010
-#define USBD_EP5RD		0xB0200014
-#define USBD_INTEN		0xB0200018
-#define USBD_INTSTAT		0xB020001C
-#  define USBDEV_INT_SOF	(1 << 12)
-#  define USBDEV_INT_HF_BIT	6
-#  define USBDEV_INT_HF_MASK	(0x3f << USBDEV_INT_HF_BIT)
-#  define USBDEV_INT_CMPLT_BIT	0
-#  define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
-#define USBD_CONFIG		0xB0200020
-#define USBD_EP0CS		0xB0200024
-#define USBD_EP2CS		0xB0200028
-#define USBD_EP3CS		0xB020002C
-#define USBD_EP4CS		0xB0200030
-#define USBD_EP5CS		0xB0200034
-#  define USBDEV_CS_SU		(1 << 14)
-#  define USBDEV_CS_NAK 	(1 << 13)
-#  define USBDEV_CS_ACK 	(1 << 12)
-#  define USBDEV_CS_BUSY	(1 << 11)
-#  define USBDEV_CS_TSIZE_BIT	1
-#  define USBDEV_CS_TSIZE_MASK	(0x3ff << USBDEV_CS_TSIZE_BIT)
-#  define USBDEV_CS_STALL	(1 << 0)
-#define USBD_EP0RDSTAT		0xB0200040
-#define USBD_EP0WRSTAT		0xB0200044
-#define USBD_EP2WRSTAT		0xB0200048
-#define USBD_EP3WRSTAT		0xB020004C
-#define USBD_EP4RDSTAT		0xB0200050
-#define USBD_EP5RDSTAT		0xB0200054
-#  define USBDEV_FSTAT_FLUSH	(1 << 6)
-#  define USBDEV_FSTAT_UF	(1 << 5)
-#  define USBDEV_FSTAT_OF	(1 << 4)
-#  define USBDEV_FSTAT_FCNT_BIT 0
-#  define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
-#define USBD_ENABLE		0xB0200058
-#  define USBDEV_ENABLE 	(1 << 1)
-#  define USBDEV_CE		(1 << 0)
-
-#endif /* !CONFIG_SOC_AU1200 */
 
 /* Ethernet Controllers  */