powerpc/fsl: add MSI support for the Freescale hypervisor

Add support for vmpic-msi nodes to the fsl_msi driver.  The MSI is
virtualized by the hypervisor, so the vmpic-msi does not contain a 'reg'
property.  Instead, the driver uses hcalls.

Add support for the "msi-address-64" property to the fsl_pci driver.
The Freescale hypervisor typically puts the virtualized MSIIR register
in the page after the end of DDR, so we extend the DDR ATMU to cover it.
Any other location for MSIIR is not supported, for now.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 29 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 8f92446ff0a..3b61e8cf342 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -137,6 +137,8 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 	u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
 			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
 	char *name = hose->dn->full_name;
+	const u64 *reg;
+	int len;
 
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		 (u64)rsrc->start, (u64)resource_size(rsrc));
@@ -229,6 +231,33 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 
 	/* Setup inbound mem window */
 	mem = memblock_end_of_DRAM();
+
+	/*
+	 * The msi-address-64 property, if it exists, indicates the physical
+	 * address of the MSIIR register.  Normally, this register is located
+	 * inside CCSR, so the ATMU that covers all of CCSR is used. But if
+	 * this property exists, then we normally need to create a new ATMU
+	 * for it.  For now, however, we cheat.  The only entity that creates
+	 * this property is the Freescale hypervisor, and the address is
+	 * specified in the partition configuration.  Typically, the address
+	 * is located in the page immediately after the end of DDR.  If so, we
+	 * can avoid allocating a new ATMU by extending the DDR ATMU by one
+	 * page.
+	 */
+	reg = of_get_property(hose->dn, "msi-address-64", &len);
+	if (reg && (len == sizeof(u64))) {
+		u64 address = be64_to_cpup(reg);
+
+		if ((address >= mem) && (address < (mem + PAGE_SIZE))) {
+			pr_info("%s: extending DDR ATMU to cover MSIIR", name);
+			mem += PAGE_SIZE;
+		} else {
+			/* TODO: Create a new ATMU for MSIIR */
+			pr_warn("%s: msi-address-64 address of %llx is "
+				"unsupported\n", name, address);
+		}
+	}
+
 	sz = min(mem, paddr_lo);
 	mem_log = __ilog2_u64(sz);