aboutsummaryrefslogtreecommitdiff
path: root/arch/x86
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2007-10-11 11:17:05 +0200
committerThomas Gleixner <tglx@linutronix.de>2007-10-11 11:17:05 +0200
commite8d08eb1b59bf6dda44fffe63cce1250d87a8b56 (patch)
treef73f6b2b8ee0d2c6b06427fdd55f9d29212ca6bc /arch/x86
parent987c75d7170686804b404b7f917b9e4b703702ff (diff)
x86_64: move kernel/acpi
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/kernel/acpi/Makefile2
-rw-r--r--arch/x86/kernel/acpi/Makefile_647
-rw-r--r--arch/x86/kernel/acpi/sleep_64.c120
-rw-r--r--arch/x86/kernel/acpi/wakeup_64.S456
4 files changed, 584 insertions, 1 deletions
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index dd4eb7cef2b..3d567193954 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -1,5 +1,5 @@
ifeq ($(CONFIG_X86_32),y)
include ${srctree}/arch/x86/kernel/acpi/Makefile_32
else
-include ${srctree}/arch/x86_64/kernel/acpi/Makefile_64
+include ${srctree}/arch/x86/kernel/acpi/Makefile_64
endif
diff --git a/arch/x86/kernel/acpi/Makefile_64 b/arch/x86/kernel/acpi/Makefile_64
new file mode 100644
index 00000000000..629425bc002
--- /dev/null
+++ b/arch/x86/kernel/acpi/Makefile_64
@@ -0,0 +1,7 @@
+obj-y := boot.o
+obj-$(CONFIG_ACPI_SLEEP) += sleep_64.o wakeup_64.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y += processor.o cstate.o
+endif
+
diff --git a/arch/x86/kernel/acpi/sleep_64.c b/arch/x86/kernel/acpi/sleep_64.c
new file mode 100644
index 00000000000..79475d23707
--- /dev/null
+++ b/arch/x86/kernel/acpi/sleep_64.c
@@ -0,0 +1,120 @@
+/*
+ * acpi.c - Architecture-Specific Low-Level ACPI Support
+ *
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
+ * Copyright (C) 2002 Andi Kleen, SuSE Labs (x86-64 port)
+ * Copyright (C) 2003 Pavel Machek, SuSE Labs
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/bootmem.h>
+#include <linux/acpi.h>
+#include <linux/cpumask.h>
+
+#include <asm/mpspec.h>
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/io_apic.h>
+#include <asm/proto.h>
+#include <asm/tlbflush.h>
+
+/* --------------------------------------------------------------------------
+ Low-Level Sleep Support
+ -------------------------------------------------------------------------- */
+
+/* address in low memory of the wakeup routine. */
+unsigned long acpi_wakeup_address = 0;
+unsigned long acpi_realmode_flags;
+extern char wakeup_start, wakeup_end;
+
+extern unsigned long acpi_copy_wakeup_routine(unsigned long);
+
+/**
+ * acpi_save_state_mem - save kernel state
+ *
+ * Create an identity mapped page table and copy the wakeup routine to
+ * low memory.
+ */
+int acpi_save_state_mem(void)
+{
+ memcpy((void *)acpi_wakeup_address, &wakeup_start,
+ &wakeup_end - &wakeup_start);
+ acpi_copy_wakeup_routine(acpi_wakeup_address);
+
+ return 0;
+}
+
+/*
+ * acpi_restore_state
+ */
+void acpi_restore_state_mem(void)
+{
+}
+
+/**
+ * acpi_reserve_bootmem - do _very_ early ACPI initialisation
+ *
+ * We allocate a page in low memory for the wakeup
+ * routine for when we come back from a sleep state. The
+ * runtime allocator allows specification of <16M pages, but not
+ * <1M pages.
+ */
+void __init acpi_reserve_bootmem(void)
+{
+ acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2);
+ if ((&wakeup_end - &wakeup_start) > (PAGE_SIZE*2))
+ printk(KERN_CRIT
+ "ACPI: Wakeup code way too big, will crash on attempt"
+ " to suspend\n");
+}
+
+static int __init acpi_sleep_setup(char *str)
+{
+ while ((str != NULL) && (*str != '\0')) {
+ if (strncmp(str, "s3_bios", 7) == 0)
+ acpi_realmode_flags |= 1;
+ if (strncmp(str, "s3_mode", 7) == 0)
+ acpi_realmode_flags |= 2;
+ if (strncmp(str, "s3_beep", 7) == 0)
+ acpi_realmode_flags |= 4;
+ str = strchr(str, ',');
+ if (str != NULL)
+ str += strspn(str, ", \t");
+ }
+ return 1;
+}
+
+__setup("acpi_sleep=", acpi_sleep_setup);
+
+void acpi_pci_link_exit(void)
+{
+}
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
new file mode 100644
index 00000000000..5e3b3f5496c
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -0,0 +1,456 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+
+# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
+#
+# wakeup_code runs in real mode, and at unknown address (determined at run-time).
+# Therefore it must only use relative jumps/calls.
+#
+# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
+#
+# If physical address of wakeup_code is 0x12345, BIOS should call us with
+# cs = 0x1234, eip = 0x05
+#
+
+#define BEEP \
+ inb $97, %al; \
+ outb %al, $0x80; \
+ movb $3, %al; \
+ outb %al, $97; \
+ outb %al, $0x80; \
+ movb $-74, %al; \
+ outb %al, $67; \
+ outb %al, $0x80; \
+ movb $-119, %al; \
+ outb %al, $66; \
+ outb %al, $0x80; \
+ movb $15, %al; \
+ outb %al, $66;
+
+
+ALIGN
+ .align 16
+ENTRY(wakeup_start)
+wakeup_code:
+ wakeup_code_start = .
+ .code16
+
+# Running in *copy* of this code, somewhere in low 1MB.
+
+ movb $0xa1, %al ; outb %al, $0x80
+ cli
+ cld
+ # setup data segment
+ movw %cs, %ax
+ movw %ax, %ds # Make ds:0 point to wakeup_start
+ movw %ax, %ss
+
+ # Data segment must be set up before we can see whether to beep.
+ testl $4, realmode_flags - wakeup_code
+ jz 1f
+ BEEP
+1:
+
+ # Private stack is needed for ASUS board
+ mov $(wakeup_stack - wakeup_code), %sp
+
+ pushl $0 # Kill any dangerous flags
+ popfl
+
+ movl real_magic - wakeup_code, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_real_magic
+
+ call verify_cpu # Verify the cpu supports long
+ # mode
+ testl %eax, %eax
+ jnz no_longmode
+
+ testl $1, realmode_flags - wakeup_code
+ jz 1f
+ lcall $0xc000,$3
+ movw %cs, %ax
+ movw %ax, %ds # Bios might have played with that
+ movw %ax, %ss
+1:
+
+ testl $2, realmode_flags - wakeup_code
+ jz 1f
+ mov video_mode - wakeup_code, %ax
+ call mode_set
+1:
+
+ movw $0xb800, %ax
+ movw %ax,%fs
+ movw $0x0e00 + 'L', %fs:(0x10)
+
+ movb $0xa2, %al ; outb %al, $0x80
+
+ mov %ds, %ax # Find 32bit wakeup_code addr
+ movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
+ shll $4, %esi
+ # Fix up the vectors
+ addl %esi, wakeup_32_vector - wakeup_code
+ addl %esi, wakeup_long64_vector - wakeup_code
+ addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
+
+ lidtl %ds:idt_48a - wakeup_code
+ lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is
+ # appropriate
+
+ movl $1, %eax # protected mode (PE) bit
+ lmsw %ax # This is it!
+ jmp 1f
+1:
+
+ ljmpl *(wakeup_32_vector - wakeup_code)
+
+ .balign 4
+wakeup_32_vector:
+ .long wakeup_32 - wakeup_code
+ .word __KERNEL32_CS, 0
+
+ .code32
+wakeup_32:
+# Running in this code, but at low address; paging is not yet turned on.
+ movb $0xa5, %al ; outb %al, $0x80
+
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+
+ movw $0x0e00 + 'i', %ds:(0xb8012)
+ movb $0xa8, %al ; outb %al, $0x80;
+
+ /*
+ * Prepare for entering 64bits mode
+ */
+
+ /* Enable PAE */
+ xorl %eax, %eax
+ btsl $5, %eax
+ movl %eax, %cr4
+
+ /* Setup early boot stage 4 level pagetables */
+ leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax
+ movl %eax, %cr3
+
+ /* Check if nx is implemented */
+ movl $0x80000001, %eax
+ cpuid
+ movl %edx,%edi
+
+ /* Enable Long Mode */
+ xorl %eax, %eax
+ btsl $_EFER_LME, %eax
+
+ /* No Execute supported? */
+ btl $20,%edi
+ jnc 1f
+ btsl $_EFER_NX, %eax
+
+ /* Make changes effective */
+1: movl $MSR_EFER, %ecx
+ xorl %edx, %edx
+ wrmsr
+
+ xorl %eax, %eax
+ btsl $31, %eax /* Enable paging and in turn activate Long Mode */
+ btsl $0, %eax /* Enable protected mode */
+
+ /* Make changes effective */
+ movl %eax, %cr0
+
+ /* At this point:
+ CR4.PAE must be 1
+ CS.L must be 0
+ CR3 must point to PML4
+ Next instruction must be a branch
+ This must be on identity-mapped page
+ */
+ /*
+ * At this point we're in long mode but in 32bit compatibility mode
+ * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
+ * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load
+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ */
+
+ /* Finally jump in 64bit mode */
+ ljmp *(wakeup_long64_vector - wakeup_code)(%esi)
+
+ .balign 4
+wakeup_long64_vector:
+ .long wakeup_long64 - wakeup_code
+ .word __KERNEL_CS, 0
+
+.code64
+
+ /* Hooray, we are in Long 64-bit mode (but still running in
+ * low memory)
+ */
+wakeup_long64:
+ /*
+ * We must switch to a new descriptor in kernel space for the GDT
+ * because soon the kernel won't have access anymore to the userspace
+ * addresses where we're currently running on. We have to do that here
+ * because in 32bit we couldn't load a 64bit linear address.
+ */
+ lgdt cpu_gdt_descr
+
+ movw $0x0e00 + 'n', %ds:(0xb8014)
+ movb $0xa9, %al ; outb %al, $0x80
+
+ movq saved_magic, %rax
+ movq $0x123456789abcdef0, %rdx
+ cmpq %rdx, %rax
+ jne bogus_64_magic
+
+ movw $0x0e00 + 'u', %ds:(0xb8016)
+
+ nop
+ nop
+ movw $__KERNEL_DS, %ax
+ movw %ax, %ss
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %fs
+ movw %ax, %gs
+ movq saved_rsp, %rsp
+
+ movw $0x0e00 + 'x', %ds:(0xb8018)
+ movq saved_rbx, %rbx
+ movq saved_rdi, %rdi
+ movq saved_rsi, %rsi
+ movq saved_rbp, %rbp
+
+ movw $0x0e00 + '!', %ds:(0xb801a)
+ movq saved_rip, %rax
+ jmp *%rax
+
+.code32
+
+ .align 64
+gdta:
+ /* Its good to keep gdt in sync with one in trampoline.S */
+ .word 0, 0, 0, 0 # dummy
+ /* ??? Why I need the accessed bit set in order for this to work? */
+ .quad 0x00cf9b000000ffff # __KERNEL32_CS
+ .quad 0x00af9b000000ffff # __KERNEL_CS
+ .quad 0x00cf93000000ffff # __KERNEL_DS
+
+idt_48a:
+ .word 0 # idt limit = 0
+ .word 0, 0 # idt base = 0L
+
+gdt_48a:
+ .word 0x800 # gdt limit=2048,
+ # 256 GDT entries
+ .long gdta - wakeup_code # gdt base (relocated in later)
+
+real_magic: .quad 0
+video_mode: .quad 0
+realmode_flags: .quad 0
+
+.code16
+bogus_real_magic:
+ movb $0xba,%al ; outb %al,$0x80
+ jmp bogus_real_magic
+
+.code64
+bogus_64_magic:
+ movb $0xb3,%al ; outb %al,$0x80
+ jmp bogus_64_magic
+
+.code16
+no_longmode:
+ movb $0xbc,%al ; outb %al,$0x80
+ jmp no_longmode
+
+#include "../../../x86_64/kernel/verify_cpu_64.S"
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ * NORMAL_VGA (-1)
+ * EXTENDED_VGA (-2)
+ * ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+# Setting of user mode (AX=mode ID) => CF=success
+
+# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
+# modes, we should probably compile in the video code from the boot
+# directory.
+.code16
+mode_set:
+ movw %ax, %bx
+ subb $VIDEO_FIRST_VESA>>8, %bh
+ cmpb $2, %bh
+ jb check_vesa
+
+setbad:
+ clc
+ ret
+
+check_vesa:
+ orw $0x4000, %bx # Use linear frame buffer
+ movw $0x4f02, %ax # VESA BIOS mode set call
+ int $0x10
+ cmpw $0x004f, %ax # AL=4f if implemented
+ jnz setbad # AH=0 if OK
+
+ stc
+ ret
+
+wakeup_stack_begin: # Stack grows down
+
+.org 0xff0
+wakeup_stack: # Just below end of page
+
+.org 0x1000
+ENTRY(wakeup_level4_pgt)
+ .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
+ .fill 510,8,0
+ /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+ .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
+
+ENTRY(wakeup_end)
+
+##
+# acpi_copy_wakeup_routine
+#
+# Copy the above routine to low memory.
+#
+# Parameters:
+# %rdi: place to copy wakeup routine to
+#
+# Returned address is location of code in low memory (past data and stack)
+#
+ .code64
+ENTRY(acpi_copy_wakeup_routine)
+ pushq %rax
+ pushq %rdx
+
+ movl saved_video_mode, %edx
+ movl %edx, video_mode - wakeup_start (,%rdi)
+ movl acpi_realmode_flags, %edx
+ movl %edx, realmode_flags - wakeup_start (,%rdi)
+ movq $0x12345678, real_magic - wakeup_start (,%rdi)
+ movq $0x123456789abcdef0, %rdx
+ movq %rdx, saved_magic
+
+ movq saved_magic, %rax
+ movq $0x123456789abcdef0, %rdx
+ cmpq %rdx, %rax
+ jne bogus_64_magic
+
+ # restore the regs we used
+ popq %rdx
+ popq %rax
+ENTRY(do_suspend_lowlevel_s4bios)
+ ret
+
+ .align 2
+ .p2align 4,,15
+.globl do_suspend_lowlevel
+ .type do_suspend_lowlevel,@function
+do_suspend_lowlevel:
+.LFB5:
+ subq $8, %rsp
+ xorl %eax, %eax
+ call save_processor_state
+
+ movq %rsp, saved_context_esp(%rip)
+ movq %rax, saved_context_eax(%rip)
+ movq %rbx, saved_context_ebx(%rip)
+ movq %rcx, saved_context_ecx(%rip)
+ movq %rdx, saved_context_edx(%rip)
+ movq %rbp, saved_context_ebp(%rip)
+ movq %rsi, saved_context_esi(%rip)
+ movq %rdi, saved_context_edi(%rip)
+ movq %r8, saved_context_r08(%rip)
+ movq %r9, saved_context_r09(%rip)
+ movq %r10, saved_context_r10(%rip)
+ movq %r11, saved_context_r11(%rip)
+ movq %r12, saved_context_r12(%rip)
+ movq %r13, saved_context_r13(%rip)
+ movq %r14, saved_context_r14(%rip)
+ movq %r15, saved_context_r15(%rip)
+ pushfq ; popq saved_context_eflags(%rip)
+
+ movq $.L97, saved_rip(%rip)
+
+ movq %rsp,saved_rsp
+ movq %rbp,saved_rbp
+ movq %rbx,saved_rbx
+ movq %rdi,saved_rdi
+ movq %rsi,saved_rsi
+
+ addq $8, %rsp
+ movl $3, %edi
+ xorl %eax, %eax
+ jmp acpi_enter_sleep_state
+.L97:
+ .p2align 4,,7
+.L99:
+ .align 4
+ movl $24, %eax
+ movw %ax, %ds
+ movq saved_context+58(%rip), %rax
+ movq %rax, %cr4
+ movq saved_context+50(%rip), %rax
+ movq %rax, %cr3
+ movq saved_context+42(%rip), %rax
+ movq %rax, %cr2
+ movq saved_context+34(%rip), %rax
+ movq %rax, %cr0
+ pushq saved_context_eflags(%rip) ; popfq
+ movq saved_context_esp(%rip), %rsp
+ movq saved_context_ebp(%rip), %rbp
+ movq saved_context_eax(%rip), %rax
+ movq saved_context_ebx(%rip), %rbx
+ movq saved_context_ecx(%rip), %rcx
+ movq saved_context_edx(%rip), %rdx
+ movq saved_context_esi(%rip), %rsi
+ movq saved_context_edi(%rip), %rdi
+ movq saved_context_r08(%rip), %r8
+ movq saved_context_r09(%rip), %r9
+ movq saved_context_r10(%rip), %r10
+ movq saved_context_r11(%rip), %r11
+ movq saved_context_r12(%rip), %r12
+ movq saved_context_r13(%rip), %r13
+ movq saved_context_r14(%rip), %r14
+ movq saved_context_r15(%rip), %r15
+
+ xorl %eax, %eax
+ addq $8, %rsp
+ jmp restore_processor_state
+.LFE5:
+.Lfe5:
+ .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
+
+.data
+ALIGN
+ENTRY(saved_rbp) .quad 0
+ENTRY(saved_rsi) .quad 0
+ENTRY(saved_rdi) .quad 0
+ENTRY(saved_rbx) .quad 0
+
+ENTRY(saved_rip) .quad 0
+ENTRY(saved_rsp) .quad 0
+
+ENTRY(saved_magic) .quad 0