aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/libata-eh.c
diff options
context:
space:
mode:
authorTejun Heo <tj@kernel.org>2010-09-01 17:50:06 +0200
committerJeff Garzik <jgarzik@redhat.com>2010-10-21 20:21:04 -0400
commit6b7ae9545ad9875a289f4191c0216b473e313cb9 (patch)
tree216b4db276202d727ba134d256144a6670497180 /drivers/ata/libata-eh.c
parent1152b2617a6e1943b6b82e07c962950e56f1000c (diff)
libata: reimplement link power management
The current LPM implementation has the following issues. * Operation order isn't well thought-out. e.g. HIPM should be configured after IPM in SControl is properly configured. Not the other way around. * Suspend/resume paths call ata_lpm_enable/disable() which must only be called from EH context directly. Also, ata_lpm_enable/disable() were called whether LPM was in use or not. * Implementation is per-port when it should be per-link. As a result, it can't be used for controllers with slave links or PMP. * LPM state isn't managed consistently. After a link reset for whatever reason including suspend/resume the actual LPM state would be reset leaving ap->lpm_policy inconsistent. * Generic/driver-specific logic boundary isn't clear. Currently, libahci has to mangle stuff which libata EH proper should be handling. This makes the implementation unnecessarily complex and fragile. * Tied to ALPM. Doesn't consider DIPM only cases and doesn't check whether the device allows HIPM. * Error handling isn't implemented. Given the extent of mismatch with the rest of libata, I don't think trying to fix it piecewise makes much sense. This patch reimplements LPM support. * The new implementation is per-link. The target policy is still port-wide (ap->target_lpm_policy) but all the mechanisms and states are per-link and integrate well with the rest of link abstraction and can work with slave and PMP links. * Core EH has proper control of LPM state. LPM state is reconfigured when and only when reconfiguration is necessary. It makes sure that LPM state is reset when probing for new device on the link. Controller agnostic logic is now implemented in libata EH proper and driver implementation only has to deal with controller specifics. * Proper error handling. LPM config failure is attributed to the device on the link and LPM is disabled for the link if it fails repeatedly. * ops->enable/disable_pm() are replaced with single ops->set_lpm() which takes @policy and @hints. This simplifies driver specific implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/libata-eh.c')
-rw-r--r--drivers/ata/libata-eh.c164
1 files changed, 145 insertions, 19 deletions
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 96aa75ddf87..a645cd3ab16 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1580,9 +1580,9 @@ static void ata_eh_analyze_serror(struct ata_link *link)
* host links. For disabled PMP links, only N bit is
* considered as X bit is left at 1 for link plugging.
*/
- hotplug_mask = 0;
-
- if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
+ if (link->lpm_policy != ATA_LPM_MAX_POWER)
+ hotplug_mask = 0; /* hotplug doesn't work w/ LPM */
+ else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;
else
hotplug_mask = SERR_PHYRDY_CHG;
@@ -2784,8 +2784,9 @@ int ata_eh_reset(struct ata_link *link, int classify,
ata_eh_done(link, NULL, ATA_EH_RESET);
if (slave)
ata_eh_done(slave, NULL, ATA_EH_RESET);
- ehc->last_reset = jiffies; /* update to completion time */
+ ehc->last_reset = jiffies; /* update to completion time */
ehc->i.action |= ATA_EH_REVALIDATE;
+ link->lpm_policy = ATA_LPM_UNKNOWN; /* reset LPM state */
rc = 0;
out:
@@ -3211,6 +3212,121 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev)
return rc;
}
+/**
+ * ata_eh_set_lpm - configure SATA interface power management
+ * @link: link to configure power management
+ * @policy: the link power management policy
+ * @r_failed_dev: out parameter for failed device
+ *
+ * Enable SATA Interface power management. This will enable
+ * Device Interface Power Management (DIPM) for min_power
+ * policy, and then call driver specific callbacks for
+ * enabling Host Initiated Power management.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ struct ata_device **r_failed_dev)
+{
+ struct ata_port *ap = link->ap;
+ struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
+ unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
+ unsigned int err_mask;
+ int rc;
+
+ /* if the link or host doesn't do LPM, noop */
+ if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
+ return 0;
+
+ /*
+ * DIPM is enabled only for MIN_POWER as some devices
+ * misbehave when the host NACKs transition to SLUMBER. Order
+ * device and link configurations such that the host always
+ * allows DIPM requests.
+ */
+ ata_for_each_dev(dev, link, ENABLED) {
+ bool hipm = ata_id_has_hipm(dev->id);
+ bool dipm = ata_id_has_dipm(dev->id);
+
+ /* find the first enabled and LPM enabled devices */
+ if (!link_dev)
+ link_dev = dev;
+
+ if (!lpm_dev && (hipm || dipm))
+ lpm_dev = dev;
+
+ hints &= ~ATA_LPM_EMPTY;
+ if (!hipm)
+ hints &= ~ATA_LPM_HIPM;
+
+ /* disable DIPM before changing link config */
+ if (policy != ATA_LPM_MIN_POWER && dipm) {
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE, SATA_DIPM);
+ if (err_mask && err_mask != AC_ERR_DEV) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "failed to disable DIPM, Emask 0x%x\n",
+ err_mask);
+ rc = -EIO;
+ goto fail;
+ }
+ }
+ }
+
+ rc = ap->ops->set_lpm(link, policy, hints);
+ if (!rc && ap->slave_link)
+ rc = ap->ops->set_lpm(ap->slave_link, policy, hints);
+
+ /*
+ * Attribute link config failure to the first (LPM) enabled
+ * device on the link.
+ */
+ if (rc) {
+ if (rc == -EOPNOTSUPP) {
+ link->flags |= ATA_LFLAG_NO_LPM;
+ return 0;
+ }
+ dev = lpm_dev ? lpm_dev : link_dev;
+ goto fail;
+ }
+
+ /* host config updated, enable DIPM if transitioning to MIN_POWER */
+ ata_for_each_dev(dev, link, ENABLED) {
+ if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_ENABLE, SATA_DIPM);
+ if (err_mask && err_mask != AC_ERR_DEV) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "failed to enable DIPM, Emask 0x%x\n",
+ err_mask);
+ rc = -EIO;
+ goto fail;
+ }
+ }
+ }
+
+ link->lpm_policy = policy;
+ if (ap && ap->slave_link)
+ ap->slave_link->lpm_policy = policy;
+ return 0;
+
+fail:
+ /* if no device or only one more chance is left, disable LPM */
+ if (!dev || ehc->tries[dev->devno] <= 2) {
+ ata_link_printk(link, KERN_WARNING,
+ "disabling LPM on the link\n");
+ link->flags |= ATA_LFLAG_NO_LPM;
+ }
+ if (r_failed_dev)
+ *r_failed_dev = dev;
+ return rc;
+}
+
static int ata_link_nr_enabled(struct ata_link *link)
{
struct ata_device *dev;
@@ -3295,6 +3411,10 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
ehc->saved_xfer_mode[dev->devno] = 0;
ehc->saved_ncq_enabled &= ~(1 << dev->devno);
+ /* the link maybe in a deep sleep, wake it up */
+ if (link->lpm_policy > ATA_LPM_MAX_POWER)
+ link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER, ATA_LPM_EMPTY);
+
/* Record and count probe trials on the ering. The specific
* error mask used is irrelevant. Because a successful device
* detection clears the ering, this count accumulates only if
@@ -3396,8 +3516,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
{
struct ata_link *link;
struct ata_device *dev;
- int nr_failed_devs;
- int rc;
+ int rc, nr_fails;
unsigned long flags, deadline;
DPRINTK("ENTER\n");
@@ -3438,7 +3557,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
retry:
rc = 0;
- nr_failed_devs = 0;
/* if UNLOADING, finish immediately */
if (ap->pflags & ATA_PFLAG_UNLOADING)
@@ -3523,13 +3641,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
}
/* the rest */
- ata_for_each_link(link, ap, EDGE) {
+ nr_fails = 0;
+ ata_for_each_link(link, ap, PMP_FIRST) {
struct ata_eh_context *ehc = &link->eh_context;
+ if (sata_pmp_attached(ap) && ata_is_host_link(link))
+ goto config_lpm;
+
/* revalidate existing devices and attach new ones */
rc = ata_eh_revalidate_and_attach(link, &dev);
if (rc)
- goto dev_fail;
+ goto rest_fail;
/* if PMP got attached, return, pmp EH will take care of it */
if (link->device->class == ATA_DEV_PMP) {
@@ -3541,7 +3663,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(link, &dev);
if (rc)
- goto dev_fail;
+ goto rest_fail;
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
@@ -3554,7 +3676,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
continue;
rc = atapi_eh_clear_ua(dev);
if (rc)
- goto dev_fail;
+ goto rest_fail;
}
}
@@ -3564,21 +3686,25 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
continue;
rc = ata_eh_maybe_retry_flush(dev);
if (rc)
- goto dev_fail;
+ goto rest_fail;
}
+ config_lpm:
/* configure link power saving */
- if (ehc->i.action & ATA_EH_LPM)
- ata_for_each_dev(dev, link, ALL)
- ata_dev_enable_pm(dev, ap->lpm_policy);
+ if (link->lpm_policy != ap->target_lpm_policy) {
+ rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev);
+ if (rc)
+ goto rest_fail;
+ }
/* this link is okay now */
ehc->i.flags = 0;
continue;
-dev_fail:
- nr_failed_devs++;
- ata_eh_handle_dev_fail(dev, rc);
+ rest_fail:
+ nr_fails++;
+ if (dev)
+ ata_eh_handle_dev_fail(dev, rc);
if (ap->pflags & ATA_PFLAG_FROZEN) {
/* PMP reset requires working host port.
@@ -3590,7 +3716,7 @@ dev_fail:
}
}
- if (nr_failed_devs)
+ if (nr_fails)
goto retry;
out: