aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-07-24 16:40:57 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-07-24 16:40:57 -0700
commit9161c3b796a2841a9a7be3d9c9dd121269ce90e8 (patch)
tree4920a191c4a2eecae1a4e055af7e967f1e769714 /drivers/clk
parent97027da6adf2e24a4e8d3d9c0668da3006b29971 (diff)
parent137f8a7213d80c1388ca48280c1ef0856b6fec30 (diff)
Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux
Pull common clk framework changes from Michael Turquette: "This includes a small number of core framework improvments, platform ports and new DT bindings." Fix up trivial conflicts in drivers/clk/Makefile * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits) clk: fix compile for OF && !COMMON_CLK clk: fix clk_get on of_clk_get_by_name return check clk: mxs: clk_register_clkdev mx28 usb clocks clk: add highbank clock support dt: add clock binding doc to primecell bindings clk: add DT fixed-clock binding support clk: add DT clock binding support ARM: integrator: convert to common clock clk: add versatile ICST307 driver ARM: integrator: put symbolic bus names on devices ARM: u300: convert to common clock clk: cache parent clocks only for muxes clk: wm831x: Add initial WM831x clock driver clk: Constify struct clk_init_data clk: Add CLK_IS_BASIC flag to identify basic clocks clk: Add support for rate table based dividers clk: Add support for power of two type dividers clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3 clk: mxs: add clkdev lookup for pwm clk: mxs: Fix the GPMI clock name ...
Diffstat (limited to 'drivers/clk')
-rw-r--r--drivers/clk/Kconfig7
-rw-r--r--drivers/clk/Makefile8
-rw-r--r--drivers/clk/clk-divider.c189
-rw-r--r--drivers/clk/clk-fixed-factor.c2
-rw-r--r--drivers/clk/clk-fixed-rate.c25
-rw-r--r--drivers/clk/clk-gate.c2
-rw-r--r--drivers/clk/clk-highbank.c346
-rw-r--r--drivers/clk/clk-mux.c2
-rw-r--r--drivers/clk/clk-u300.c746
-rw-r--r--drivers/clk/clk-wm831x.c428
-rw-r--r--drivers/clk/clk.c144
-rw-r--r--drivers/clk/clkdev.c77
-rw-r--r--drivers/clk/mxs/clk-imx23.c3
-rw-r--r--drivers/clk/mxs/clk-imx28.c13
-rw-r--r--drivers/clk/versatile/Makefile3
-rw-r--r--drivers/clk/versatile/clk-icst.c100
-rw-r--r--drivers/clk/versatile/clk-icst.h10
-rw-r--r--drivers/clk/versatile/clk-integrator.c111
18 files changed, 2170 insertions, 46 deletions
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 4864407e3fc..3f99b909965 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -34,4 +34,11 @@ config COMMON_CLK_DEBUG
clk_flags, clk_prepare_count, clk_enable_count &
clk_notifier_count.
+config COMMON_CLK_WM831X
+ tristate "Clock driver for WM831x/2x PMICs"
+ depends on MFD_WM831X
+ ---help---
+ Supports the clocking subsystem of the WM831x/2x series of
+ PMICs from Wolfson Microlectronics.
+
endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 3669761d1ba..5869ea38705 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,9 +1,15 @@
-
+# common clock types
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
clk-mux.o clk-divider.o clk-fixed-factor.o
# SoCs specific
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
+obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
+obj-$(CONFIG_ARCH_U300) += clk-u300.o
+obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/
+
+# Chip specific
+obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 8ea11b44452..a9204c69148 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -30,18 +30,89 @@
#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
#define div_mask(d) ((1 << (d->width)) - 1)
+#define is_power_of_two(i) !(i & ~i)
+
+static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
+{
+ unsigned int maxdiv = 0;
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div > maxdiv)
+ maxdiv = clkt->div;
+ return maxdiv;
+}
+
+static unsigned int _get_maxdiv(struct clk_divider *divider)
+{
+ if (divider->flags & CLK_DIVIDER_ONE_BASED)
+ return div_mask(divider);
+ if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+ return 1 << div_mask(divider);
+ if (divider->table)
+ return _get_table_maxdiv(divider->table);
+ return div_mask(divider) + 1;
+}
+
+static unsigned int _get_table_div(const struct clk_div_table *table,
+ unsigned int val)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->val == val)
+ return clkt->div;
+ return 0;
+}
+
+static unsigned int _get_div(struct clk_divider *divider, unsigned int val)
+{
+ if (divider->flags & CLK_DIVIDER_ONE_BASED)
+ return val;
+ if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+ return 1 << val;
+ if (divider->table)
+ return _get_table_div(divider->table, val);
+ return val + 1;
+}
+
+static unsigned int _get_table_val(const struct clk_div_table *table,
+ unsigned int div)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div == div)
+ return clkt->val;
+ return 0;
+}
+
+static unsigned int _get_val(struct clk_divider *divider, u8 div)
+{
+ if (divider->flags & CLK_DIVIDER_ONE_BASED)
+ return div;
+ if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+ return __ffs(div);
+ if (divider->table)
+ return _get_table_val(divider->table, div);
+ return div - 1;
+}
static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_divider *divider = to_clk_divider(hw);
- unsigned int div;
+ unsigned int div, val;
- div = readl(divider->reg) >> divider->shift;
- div &= div_mask(divider);
+ val = readl(divider->reg) >> divider->shift;
+ val &= div_mask(divider);
- if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
- div++;
+ div = _get_div(divider, val);
+ if (!div) {
+ WARN(1, "%s: Invalid divisor for clock %s\n", __func__,
+ __clk_get_name(hw->clk));
+ return parent_rate;
+ }
return parent_rate / div;
}
@@ -52,6 +123,26 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
*/
#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
+static bool _is_valid_table_div(const struct clk_div_table *table,
+ unsigned int div)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div == div)
+ return true;
+ return false;
+}
+
+static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
+{
+ if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+ return is_power_of_two(div);
+ if (divider->table)
+ return _is_valid_table_div(divider->table, div);
+ return true;
+}
+
static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
unsigned long *best_parent_rate)
{
@@ -62,10 +153,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
if (!rate)
rate = 1;
- maxdiv = (1 << divider->width);
-
- if (divider->flags & CLK_DIVIDER_ONE_BASED)
- maxdiv--;
+ maxdiv = _get_maxdiv(divider);
if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
parent_rate = *best_parent_rate;
@@ -82,6 +170,8 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
maxdiv = min(ULONG_MAX / rate, maxdiv);
for (i = 1; i <= maxdiv; i++) {
+ if (!_is_valid_div(divider, i))
+ continue;
parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
MULT_ROUND_UP(rate, i));
now = parent_rate / i;
@@ -93,9 +183,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
}
if (!bestdiv) {
- bestdiv = (1 << divider->width);
- if (divider->flags & CLK_DIVIDER_ONE_BASED)
- bestdiv--;
+ bestdiv = _get_maxdiv(divider);
*best_parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), 1);
}
@@ -115,24 +203,22 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_divider *divider = to_clk_divider(hw);
- unsigned int div;
+ unsigned int div, value;
unsigned long flags = 0;
u32 val;
div = parent_rate / rate;
+ value = _get_val(divider, div);
- if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
- div--;
-
- if (div > div_mask(divider))
- div = div_mask(divider);
+ if (value > div_mask(divider))
+ value = div_mask(divider);
if (divider->lock)
spin_lock_irqsave(divider->lock, flags);
val = readl(divider->reg);
val &= ~(div_mask(divider) << divider->shift);
- val |= div << divider->shift;
+ val |= value << divider->shift;
writel(val, divider->reg);
if (divider->lock)
@@ -148,22 +234,11 @@ const struct clk_ops clk_divider_ops = {
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
-/**
- * clk_register_divider - register a divider clock with the clock framework
- * @dev: device registering this clock
- * @name: name of this clock
- * @parent_name: name of clock's parent
- * @flags: framework-specific flags
- * @reg: register address to adjust divider
- * @shift: number of bits to shift the bitfield
- * @width: width of the bitfield
- * @clk_divider_flags: divider-specific flags for this clock
- * @lock: shared register lock for this clock
- */
-struct clk *clk_register_divider(struct device *dev, const char *name,
+static struct clk *_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
- u8 clk_divider_flags, spinlock_t *lock)
+ u8 clk_divider_flags, const struct clk_div_table *table,
+ spinlock_t *lock)
{
struct clk_divider *div;
struct clk *clk;
@@ -178,7 +253,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
init.name = name;
init.ops = &clk_divider_ops;
- init.flags = flags;
+ init.flags = flags | CLK_IS_BASIC;
init.parent_names = (parent_name ? &parent_name: NULL);
init.num_parents = (parent_name ? 1 : 0);
@@ -189,6 +264,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
div->flags = clk_divider_flags;
div->lock = lock;
div->hw.init = &init;
+ div->table = table;
/* register the clock */
clk = clk_register(dev, &div->hw);
@@ -198,3 +274,48 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
return clk;
}
+
+/**
+ * clk_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, spinlock_t *lock)
+{
+ return _register_divider(dev, name, parent_name, flags, reg, shift,
+ width, clk_divider_flags, NULL, lock);
+}
+
+/**
+ * clk_register_divider_table - register a table based divider clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @table: array of divider/value pairs ending with a div set to 0
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_divider_table(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, const struct clk_div_table *table,
+ spinlock_t *lock)
+{
+ return _register_divider(dev, name, parent_name, flags, reg, shift,
+ width, clk_divider_flags, table, lock);
+}
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index c8c003e217a..a4899855c0f 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -82,7 +82,7 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
init.name = name;
init.ops = &clk_fixed_factor_ops;
- init.flags = flags;
+ init.flags = flags | CLK_IS_BASIC;
init.parent_names = &parent_name;
init.num_parents = 1;
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index cbd24622978..f5ec0eebd4d 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/of.h>
/*
* DOC: basic fixed-rate clock that cannot gate
@@ -63,7 +64,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
init.name = name;
init.ops = &clk_fixed_rate_ops;
- init.flags = flags;
+ init.flags = flags | CLK_IS_BASIC;
init.parent_names = (parent_name ? &parent_name: NULL);
init.num_parents = (parent_name ? 1 : 0);
@@ -79,3 +80,25 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
return clk;
}
+
+#ifdef CONFIG_OF
+/**
+ * of_fixed_clk_setup() - Setup function for simple fixed rate clock
+ */
+void __init of_fixed_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ u32 rate;
+
+ if (of_property_read_u32(node, "clock-frequency", &rate))
+ return;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate);
+ if (clk)
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+EXPORT_SYMBOL_GPL(of_fixed_clk_setup);
+#endif
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 578465e04be..15114febfd9 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -130,7 +130,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
init.name = name;
init.ops = &clk_gate_ops;
- init.flags = flags;
+ init.flags = flags | CLK_IS_BASIC;
init.parent_names = (parent_name ? &parent_name: NULL);
init.num_parents = (parent_name ? 1 : 0);
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
new file mode 100644
index 00000000000..52fecadf004
--- /dev/null
+++ b/drivers/clk/clk-highbank.c
@@ -0,0 +1,346 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+extern void __iomem *sregs_base;
+
+#define HB_PLL_LOCK_500 0x20000000
+#define HB_PLL_LOCK 0x10000000
+#define HB_PLL_DIVF_SHIFT 20
+#define HB_PLL_DIVF_MASK 0x0ff00000
+#define HB_PLL_DIVQ_SHIFT 16
+#define HB_PLL_DIVQ_MASK 0x00070000
+#define HB_PLL_DIVR_SHIFT 8
+#define HB_PLL_DIVR_MASK 0x00001f00
+#define HB_PLL_RANGE_SHIFT 4
+#define HB_PLL_RANGE_MASK 0x00000070
+#define HB_PLL_BYPASS 0x00000008
+#define HB_PLL_RESET 0x00000004
+#define HB_PLL_EXT_BYPASS 0x00000002
+#define HB_PLL_EXT_ENA 0x00000001
+
+#define HB_PLL_VCO_MIN_FREQ 2133000000
+#define HB_PLL_MAX_FREQ HB_PLL_VCO_MIN_FREQ
+#define HB_PLL_MIN_FREQ (HB_PLL_VCO_MIN_FREQ / 64)
+
+#define HB_A9_BCLK_DIV_MASK 0x00000006
+#define HB_A9_BCLK_DIV_SHIFT 1
+#define HB_A9_PCLK_DIV 0x00000001
+
+struct hb_clk {
+ struct clk_hw hw;
+ void __iomem *reg;
+ char *parent_name;
+};
+#define to_hb_clk(p) container_of(p, struct hb_clk, hw)
+
+static int clk_pll_prepare(struct clk_hw *hwclk)
+ {
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 reg;
+
+ reg = readl(hbclk->reg);
+ reg &= ~HB_PLL_RESET;
+ writel(reg, hbclk->reg);
+
+ while ((readl(hbclk->reg) & HB_PLL_LOCK) == 0)
+ ;
+ while ((readl(hbclk->reg) & HB_PLL_LOCK_500) == 0)
+ ;
+
+ return 0;
+}
+
+static void clk_pll_unprepare(struct clk_hw *hwclk)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 reg;
+
+ reg = readl(hbclk->reg);
+ reg |= HB_PLL_RESET;
+ writel(reg, hbclk->reg);
+}
+
+static int clk_pll_enable(struct clk_hw *hwclk)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 reg;
+
+ reg = readl(hbclk->reg);
+ reg |= HB_PLL_EXT_ENA;
+ writel(reg, hbclk->reg);
+
+ return 0;
+}
+
+static void clk_pll_disable(struct clk_hw *hwclk)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 reg;
+
+ reg = readl(hbclk->reg);
+ reg &= ~HB_PLL_EXT_ENA;
+ writel(reg, hbclk->reg);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hwclk,
+ unsigned long parent_rate)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ unsigned long divf, divq, vco_freq, reg;
+
+ reg = readl(hbclk->reg);
+ if (reg & HB_PLL_EXT_BYPASS)
+ return parent_rate;
+
+ divf = (reg & HB_PLL_DIVF_MASK) >> HB_PLL_DIVF_SHIFT;
+ divq = (reg & HB_PLL_DIVQ_MASK) >> HB_PLL_DIVQ_SHIFT;
+ vco_freq = parent_rate * (divf + 1);
+
+ return vco_freq / (1 << divq);
+}
+
+static void clk_pll_calc(unsigned long rate, unsigned long ref_freq,
+ u32 *pdivq, u32 *pdivf)
+{
+ u32 divq, divf;
+ unsigned long vco_freq;
+
+ if (rate < HB_PLL_MIN_FREQ)
+ rate = HB_PLL_MIN_FREQ;
+ if (rate > HB_PLL_MAX_FREQ)
+ rate = HB_PLL_MAX_FREQ;
+
+ for (divq = 1; divq <= 6; divq++) {
+ if ((rate * (1 << divq)) >= HB_PLL_VCO_MIN_FREQ)
+ break;
+ }
+
+ vco_freq = rate * (1 << divq);
+ divf = (vco_freq + (ref_freq / 2)) / ref_freq;
+ divf--;
+
+ *pdivq = divq;
+ *pdivf = divf;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hwclk, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ u32 divq, divf;
+ unsigned long ref_freq = *parent_rate;
+
+ clk_pll_calc(rate, ref_freq, &divq, &divf);
+
+ return (ref_freq * (divf + 1)) / (1 << divq);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 divq, divf;
+ u32 reg;
+
+ clk_pll_calc(rate, parent_rate, &divq, &divf);
+
+ reg = readl(hbclk->reg);
+ if (divf != ((reg & HB_PLL_DIVF_MASK) >> HB_PLL_DIVF_SHIFT)) {
+ /* Need to re-lock PLL, so put it into bypass mode */
+ reg |= HB_PLL_EXT_BYPASS;
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
+
+ writel(reg | HB_PLL_RESET, hbclk->reg);
+ reg &= ~(HB_PLL_DIVF_MASK | HB_PLL_DIVQ_MASK);
+ reg |= (divf << HB_PLL_DIVF_SHIFT) | (divq << HB_PLL_DIVQ_SHIFT);
+ writel(reg | HB_PLL_RESET, hbclk->reg);
+ writel(reg, hbclk->reg);
+
+ while ((readl(hbclk->reg) & HB_PLL_LOCK) == 0)
+ ;
+ while ((readl(hbclk->reg) & HB_PLL_LOCK_500) == 0)
+ ;
+ reg |= HB_PLL_EXT_ENA;
+ reg &= ~HB_PLL_EXT_BYPASS;
+ } else {
+ reg &= ~HB_PLL_DIVQ_MASK;
+ reg |= divq << HB_PLL_DIVQ_SHIFT;
+ }
+ writel(reg, hbclk->reg);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pll_ops = {
+ .prepare = clk_pll_prepare,
+ .unprepare = clk_pll_unprepare,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
+};
+
+static unsigned long clk_cpu_periphclk_recalc_rate(struct clk_hw *hwclk,
+ unsigned long parent_rate)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 div = (readl(hbclk->reg) & HB_A9_PCLK_DIV) ? 8 : 4;
+ return parent_rate / div;
+}
+
+static const struct clk_ops a9periphclk_ops = {
+ .recalc_rate = clk_cpu_periphclk_recalc_rate,
+};
+
+static unsigned long clk_cpu_a9bclk_recalc_rate(struct clk_hw *hwclk,
+ unsigned long parent_rate)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 div = (readl(hbclk->reg) & HB_A9_BCLK_DIV_MASK) >> HB_A9_BCLK_DIV_SHIFT;
+
+ return parent_rate / (div + 2);
+}
+
+static const struct clk_ops a9bclk_ops = {
+ .recalc_rate = clk_cpu_a9bclk_recalc_rate,
+};
+
+static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk,
+ unsigned long parent_rate)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 div;
+
+ div = readl(hbclk->reg) & 0x1f;
+ div++;
+ div *= 2;
+
+ return parent_rate / div;
+}
+
+static long clk_periclk_round_rate(struct clk_hw *hwclk, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ u32 div;
+
+ div = *parent_rate / rate;
+ div++;
+ div &= ~0x1;
+
+ return *parent_rate / div;
+}
+
+static int clk_periclk_set_rate(struct clk_hw *hwclk, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct hb_clk *hbclk = to_hb_clk(hwclk);
+ u32 div;
+
+ div = parent_rate / rate;
+ if (div & 0x1)
+ return -EINVAL;
+
+ writel(div >> 1, hbclk->reg);
+ return 0;
+}
+
+static const struct clk_ops periclk_ops = {
+ .recalc_rate = clk_periclk_recalc_rate,
+ .round_rate = clk_periclk_round_rate,
+ .set_rate = clk_periclk_set_rate,
+};
+
+static __init struct clk *hb_clk_init(struct device_node *node, const struct clk_ops *ops)
+{
+ u32 reg;
+ struct clk *clk;
+ struct hb_clk *hb_clk;
+ const char *clk_name = node->name;
+ const char *parent_name;
+ struct clk_init_data init;
+ int rc;
+
+ rc = of_property_read_u32(node, "reg", &reg);
+ if (WARN_ON(rc))
+ return NULL;
+
+ hb_clk = kzalloc(sizeof(*hb_clk), GFP_KERNEL);
+ if (WARN_ON(!hb_clk))
+ return NULL;
+
+ hb_clk->reg = sregs_base + reg;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ init.name = clk_name;
+ init.ops = ops;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ hb_clk->hw.init = &init;
+
+ clk = clk_register(NULL, &hb_clk->hw);
+ if (WARN_ON(IS_ERR(clk))) {
+ kfree(hb_clk);
+ return NULL;
+ }
+ rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ return clk;
+}
+
+static void __init hb_pll_init(struct device_node *node)
+{
+ hb_clk_init(node, &clk_pll_ops);
+}
+
+static void __init hb_a9periph_init(struct device_node *node)
+{
+ hb_clk_init(node, &a9periphclk_ops);
+}
+
+static void __init hb_a9bus_init(struct device_node *node)
+{
+ struct clk *clk = hb_clk_init(node, &a9bclk_ops);
+ clk_prepare_enable(clk);
+}
+
+static void __init hb_emmc_init(struct device_node *node)
+{
+ hb_clk_init(node, &periclk_ops);
+}
+
+static const __initconst struct of_device_id clk_match[] = {
+ { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+ { .compatible = "calxeda,hb-pll-clock", .data = hb_pll_init, },
+ { .compatible = "calxeda,hb-a9periph-clock", .data = hb_a9periph_init, },
+ { .compatible = "calxeda,hb-a9bus-clock", .data = hb_a9bus_init, },
+ { .compatible = "calxeda,hb-emmc-clock", .data = hb_emmc_init, },
+ {}
+};
+
+void __init highbank_clocks_init(void)
+{
+ of_clk_init(clk_match);
+}
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index fd36a8ea73d..508c032edce 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -106,7 +106,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
init.name = name;
init.ops = &clk_mux_ops;
- init.flags = flags;
+ init.flags = flags | CLK_IS_BASIC;
init.parent_names = parent_names;
init.num_parents = num_parents;
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
new file mode 100644
index 00000000000..a15f7928fb1
--- /dev/null
+++ b/drivers/clk/clk-u300.c
@@ -0,0 +1,746 @@
+/*
+ * U300 clock implementation
+ * Copyright (C) 2007-2012 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include <mach/syscon.h>
+
+/*
+ * The clocking hierarchy currently looks like this.
+ * NOTE: the idea is NOT to show how the clocks are routed on the chip!
+ * The ideas is to show dependencies, so a clock higher up in the
+ * hierarchy has to be on in order for another clock to be on. Now,
+ * both CPU and DMA can actually be on top of the hierarchy, and that
+ * is not modeled currently. Instead we have the backbone AMBA bus on
+ * top. This bus cannot be programmed in any way but conceptually it
+ * needs to be active for the bridges and devices to transport data.
+ *
+ * Please be aware that a few clocks are hw controlled, which mean that
+ * the hw itself can turn on/off or change the rate of the clock when
+ * needed!
+ *
+ * AMBA bus
+ * |
+ * +- CPU
+ * +- FSMC NANDIF NAND Flash interface
+ * +- SEMI Shared Memory interface
+ * +- ISP Image Signal Processor (U335 only)
+ * +- CDS (U335 only)
+ * +- DMA Direct Memory Access Controller
+ * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
+ * +- APEX
+ * +- VIDEO_ENC AVE2/3 Video Encoder
+ * +- XGAM Graphics Accelerator Controller
+ * +- AHB
+ * |
+ * +- ahb:0 AHB Bridge
+ * | |
+ * | +- ahb:1 INTCON Interrupt controller
+ * | +- ahb:3 MSPRO Memory Stick Pro controller
+ * | +- ahb:4 EMIF External Memory interface
+ * |
+ * +- fast:0 FAST bridge
+ * | |
+ * | +- fast:1 MMCSD MMC/SD card reader controller
+ * | +- fast:2 I2S0 PCM I2S channel 0 controller
+ * | +- fast:3 I2S1 PCM I2S channel 1 controller
+ * | +- fast:4 I2C0 I2C channel 0 controller
+ * | +- fast:5 I2C1 I2C channel 1 controller
+ * | +- fast:6 SPI SPI controller
+ * | +- fast:7 UART1 Secondary UART (U335 only)
+ * |
+ * +- slow:0 SLOW bridge
+ * |
+ * +- slow:1 SYSCON (not possible to control)
+ * +- slow:2 WDOG Watchdog
+ * +- slow:3 UART0 primary UART
+ * +- slow:4 TIMER_APP Application timer - used in Linux
+ * +- slow:5 KEYPAD controller
+ * +- slow:6 GPIO controller
+ * +- slow:7 RTC controller
+ * +- slow:8 BT Bus Tracer (not used currently)
+ * +- slow:9 EH Event Handler (not used currently)
+ * +- slow:a TIMER_ACC Access style timer (not used currently)
+ * +- slow:b PPM (U335 only, what is that?)
+ */
+
+/* Global syscon virtual base */
+static void __iomem *syscon_vbase;
+
+/**
+ * struct clk_syscon - U300 syscon clock
+ * @hw: corresponding clock hardware entry
+ * @hw_ctrld: whether this clock is hardware controlled (for refcount etc)
+ * and does not need any magic pokes to be enabled/disabled
+ * @reset: state holder, whether this block's reset line is asserted or not
+ * @res_reg: reset line enable/disable flag register
+ * @res_bit: bit for resetting or taking this consumer out of reset
+ * @en_reg: clock line enable/disable flag register
+ * @en_bit: bit for enabling/disabling this consumer clock line
+ * @clk_val: magic value to poke in the register to enable/disable
+ * this one clock
+ */
+struct clk_syscon {
+ struct clk_hw hw;
+ bool hw_ctrld;
+ bool reset;
+ void __iomem *res_reg;
+ u8 res_bit;
+ void __iomem *en_reg;
+ u8 en_bit;
+ u16 clk_val;
+};
+
+#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw)
+
+static DEFINE_SPINLOCK(syscon_resetreg_lock);
+
+/*
+ * Reset control functions. We remember if a block has been
+ * taken out of reset and don't remove the reset assertion again
+ * and vice versa. Currently we only remove resets so the
+ * enablement function is defined out.
+ */
+static void syscon_block_reset_enable(struct clk_syscon *sclk)
+{
+ unsigned long iflags;
+ u16 val;
+
+ /* Not all blocks support resetting */
+ if (!sclk->res_reg)
+ return;
+ spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+ val = readw(sclk->res_reg);
+ val |= BIT(sclk->res_bit);
+ writew(val, sclk->res_reg);
+ spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+ sclk->reset = true;
+}
+
+static void syscon_block_reset_disable(struct clk_syscon *sclk)
+{
+ unsigned long iflags;
+ u16 val;
+
+ /* Not all blocks support resetting */
+ if (!sclk->res_reg)
+ return;
+ spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+ val = readw(sclk->res_reg);
+ val &= ~BIT(sclk->res_bit);
+ writew(val, sclk->res_reg);
+ spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+ sclk->reset = false;
+}
+
+static int syscon_clk_prepare(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ /* If the block is in reset, bring it out */
+ if (sclk->reset)
+ syscon_block_reset_disable(sclk);
+ return 0;
+}
+
+static void syscon_clk_unprepare(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ /* Please don't force the console into reset */
+ if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
+ return;
+ /* When unpreparing, force block into reset */
+ if (!sclk->reset)
+ syscon_block_reset_enable(sclk);
+}
+
+static int syscon_clk_enable(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ /* Don't touch the hardware controlled clocks */
+ if (sclk->hw_ctrld)
+ return 0;
+ /* These cannot be controlled */
+ if (sclk->clk_val == 0xFFFFU)
+ return 0;
+
+ writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER);
+ return 0;
+}
+
+static void syscon_clk_disable(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ /* Don't touch the hardware controlled clocks */
+ if (sclk->hw_ctrld)
+ return;
+ if (sclk->clk_val == 0xFFFFU)
+ return;
+ /* Please don't disable the console port */
+ if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
+ return;
+
+ writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR);
+}
+
+static int syscon_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+ u16 val;
+
+ /* If no enable register defined, it's always-on */
+ if (!sclk->en_reg)
+ return 1;
+
+ val = readw(sclk->en_reg);
+ val &= BIT(sclk->en_bit);
+
+ return val ? 1 : 0;
+}
+
+static u16 syscon_get_perf(void)
+{
+ u16 val;
+
+ val = readw(syscon_vbase + U300_SYSCON_CCR);
+ val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+ return val;
+}
+
+static unsigned long
+syscon_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+ u16 perf = syscon_get_perf();
+
+ switch(sclk->clk_val) {
+ case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN:
+ case U300_SYSCON_SBCER_I2C0_CLK_EN:
+ case U300_SYSCON_SBCER_I2C1_CLK_EN:
+ case U300_SYSCON_SBCER_MMC_CLK_EN:
+ case U300_SYSCON_SBCER_SPI_CLK_EN:
+ /* The FAST clocks have one progression */
+ switch(perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ default:
+ return parent_rate; /* 26 MHz */
+ }
+ case U300_SYSCON_SBCER_DMAC_CLK_EN:
+ case U300_SYSCON_SBCER_NANDIF_CLK_EN:
+ case U300_SYSCON_SBCER_XGAM_CLK_EN:
+ /* AMBA interconnect peripherals */
+ switch(perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 6500000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 26000000;
+ default:
+ return parent_rate; /* 52 MHz */
+ }
+ case U300_SYSCON_SBCER_SEMI_CLK_EN:
+ case U300_SYSCON_SBCER_EMIF_CLK_EN:
+ /* EMIF speeds */
+ switch(perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 52000000;
+ default:
+ return 104000000;
+ }
+ case U300_SYSCON_SBCER_CPU_CLK_EN:
+ /* And the fast CPU clock */
+ switch(perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 52000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ return 104000000;
+ default:
+ return parent_rate; /* 208 MHz */
+ }
+ default:
+ /*
+ * The SLOW clocks and default just inherit the rate of
+ * their parent (typically PLL13 13 MHz).
+ */
+ return parent_rate;
+ }
+}
+
+static long
+syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
+ return *prate;
+ /* We really only support setting the rate of the CPU clock */
+ if (rate <= 13000000)
+ return 13000000;
+ if (rate <= 52000000)
+ return 52000000;
+ if (rate <= 104000000)
+ return 104000000;
+ return 208000000;
+}
+
+static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+ u16 val;
+
+ /* We only support setting the rate of the CPU clock */
+ if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
+ return -EINVAL;
+ switch (rate) {
+ case 13000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
+ break;
+ case 52000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
+ break;
+ case 104000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
+ break;
+ case 208000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
+ break;
+ default:
+ return -EINVAL;
+ }
+ val |= readw(syscon_vbase + U300_SYSCON_CCR) &
+ ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
+ writew(val, syscon_vbase + U300_SYSCON_CCR);
+ return 0;
+}
+
+static const struct clk_ops syscon_clk_ops = {
+ .prepare = syscon_clk_prepare,
+ .unprepare = syscon_clk_unprepare,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .is_enabled = syscon_clk_is_enabled,
+ .recalc_rate = syscon_clk_recalc_rate,
+ .round_rate = syscon_clk_round_rate,
+ .set_rate = syscon_clk_set_rate,
+};
+
+static struct clk * __init
+syscon_clk_register(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ bool hw_ctrld,
+ void __iomem *res_reg, u8 res_bit,
+ void __iomem *en_reg, u8 en_bit,
+ u16 clk_val)
+{
+ struct clk *clk;
+ struct clk_syscon *sclk;
+ struct clk_init_data init;
+
+ sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL);
+ if (!sclk) {
+ pr_err("could not allocate syscon clock %s\n",
+ name);
+ return ERR_PTR(-ENOMEM);
+ }
+ init.name = name;
+ init.ops = &syscon_clk_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ sclk->hw.init = &init;
+ sclk->hw_ctrld = hw_ctrld;
+ /* Assume the block is in reset at registration */
+ sclk->reset = true;
+ sclk->res_reg = res_reg;
+ sclk->res_bit = res_bit;
+ sclk->en_reg = en_reg;
+ sclk->en_bit = en_bit;
+ sclk->clk_val = clk_val;
+
+ clk = clk_register(dev, &sclk->hw);
+ if (IS_ERR(clk))
+ kfree(sclk);
+
+ return clk;
+}
+
+/**
+ * struct clk_mclk - U300 MCLK clock (MMC/SD clock)
+ * @hw: corresponding clock hardware entry
+ * @is_mspro: if this is the memory stick clock rather than MMC/SD
+ */
+struct clk_mclk {
+ struct clk_hw hw;
+ bool is_mspro;
+};
+
+#define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw)
+
+static int mclk_clk_prepare(struct clk_hw *hw)
+{
+ struct clk_mclk *mclk = to_mclk(hw);
+ u16 val;
+
+ /* The MMC and MSPRO clocks need some special set-up */
+ if (!mclk->is_mspro) {
+ /* Set default MMC clock divisor to 18.9 MHz */
+ writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R);
+ val = readw(syscon_vbase + U300_SYSCON_MMCR);
+ /* Disable the MMC feedback clock */
+ val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+ /* Disable MSPRO frequency */
+ val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+ writew(val, syscon_vbase + U300_SYSCON_MMCR);
+ } else {
+ val = readw(syscon_vbase + U300_SYSCON_MMCR);
+ /* Disable the MMC feedback clock */
+ val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+ /* Enable MSPRO frequency */
+ val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+ writew(val, syscon_vbase + U300_SYSCON_MMCR);
+ }
+
+ return 0;
+}
+
+static unsigned long
+mclk_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u16 perf = syscon_get_perf();
+
+ switch (perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ /*
+ * Here, the 208 MHz PLL gets shut down and the always
+ * on 13 MHz PLL used for RTC etc kicks into use
+ * instead.
+ */
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+ {
+ /*
+ * This clock is under program control. The register is
+ * divided in two nybbles, bit 7-4 gives cycles-1 to count
+ * high, bit 3-0 gives cycles-1 to count low. Distribute
+ * these with no more than 1 cycle difference between
+ * low and high and add low and high to get the actual
+ * divisor. The base PLL is 208 MHz. Writing 0x00 will
+ * divide by 1 and 1 so the highest frequency possible
+ * is 104 MHz.
+ *
+ * e.g. 0x54 =>
+ * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
+ */
+ u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) &
+ U300_SYSCON_MMF0R_MASK;
+ switch (val) {
+ case 0x0054:
+ return 18900000;
+ case 0x0044:
+ return 20800000;
+ case 0x0043:
+ return 23100000;
+ case 0x0033:
+ return 26000000;
+ case 0x0032:
+ return 29700000;
+ case 0x0022:
+ return 34700000;
+ case 0x0021:
+ return 41600000;
+ case 0x0011:
+ return 52000000;
+ case 0x0000:
+ return 104000000;
+ default:
+ break;
+ }
+ }
+ default:
+ break;
+ }
+ return parent_rate;
+}
+
+static long
+mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ if (rate <= 18900000)
+ return 18900000;
+ if (rate <= 20800000)
+ return 20800000;
+ if (rate <= 23100000)
+ return 23100000;
+ if (rate <= 26000000)
+ return 26000000;
+ if (rate <= 29700000)
+ return 29700000;
+ if (rate <= 34700000)
+ return 34700000;
+ if (rate <= 41600000)
+ return 41600000;
+ /* Highest rate */
+ return 52000000;
+}
+
+static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u16 val;
+ u16 reg;
+
+ switch (rate) {
+ case 18900000:
+ val = 0x0054;
+ break;
+ case 20800000:
+ val = 0x0044;
+ break;
+ case 23100000:
+ val = 0x0043;
+ break;
+ case 26000000:
+ val = 0x0033;
+ break;
+ case 29700000:
+ val = 0x0032;
+ break;
+ case 34700000:
+ val = 0x0022;
+ break;
+ case 41600000:
+ val = 0x0021;
+ break;
+ case 52000000:
+ val = 0x0011;
+ break;
+ case 104000000:
+ val = 0x0000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = readw(syscon_vbase + U300_SYSCON_MMF0R) &
+ ~U300_SYSCON_MMF0R_MASK;
+ writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R);
+ return 0;
+}
+
+static const struct clk_ops mclk_ops = {
+ .prepare = mclk_clk_prepare,
+ .recalc_rate = mclk_clk_recalc_rate,
+ .round_rate = mclk_clk_round_rate,
+ .set_rate = mclk_clk_set_rate,
+};
+
+static struct clk * __init
+mclk_clk_register(struct device *dev, const char *name,
+ const char *parent_name, bool is_mspro)
+{
+ struct clk *clk;
+ struct clk_mclk *mclk;
+ struct clk_init_data init;
+
+ mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL);
+ if (!mclk) {
+ pr_err("could not allocate MMC/SD clock %s\n",
+ name);
+ return ERR_PTR(-ENOMEM);
+ }
+ init.name = "mclk";
+ init.ops = &mclk_ops;
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ mclk->hw.init = &init;
+ mclk->is_mspro = is_mspro;
+
+ clk = clk_register(dev, &mclk->hw);
+ if (IS_ERR(clk))
+ kfree(mclk);
+
+ return clk;
+}
+
+void __init u300_clk_init(void __iomem *base)
+{
+ u16 val;
+ struct clk *clk;
+
+ syscon_vbase = base;
+
+ /* Set system to run at PLL208, max performance, a known state. */
+ val = readw(syscon_vbase + U300_SYSCON_CCR);
+ val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+ writew(val, syscon_vbase + U300_SYSCON_CCR);
+ /* Wait for the PLL208 to lock if not locked in yet */
+ while (!(readw(syscon_vbase + U300_SYSCON_CSR) &
+ U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+ /* Power management enable */
+ val = readw(syscon_vbase + U300_SYSCON_PMCR);
+ val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
+ writew(val, syscon_vbase + U300_SYSCON_PMCR);
+
+ /* These are always available (RTC and PLL13) */
+ clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL,
+ CLK_IS_ROOT, 32768);
+ /* The watchdog sits directly on the 32 kHz clock */
+ clk_register_clkdev(clk, NULL, "coh901327_wdog");
+ clk = clk_register_fixed_rate(NULL, "pll13", NULL,
+ CLK_IS_ROOT, 13000000);
+
+ /* These derive from PLL208 */
+ clk = clk_register_fixed_rate(NULL, "pll208", NULL,
+ CLK_IS_ROOT, 208000000);
+ clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208",
+ 0, 1, 1);
+ clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208",
+ 0, 1, 2);
+ clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208",
+ 0, 1, 4);
+ /* The 52 MHz is divided down to 26 MHz */
+ clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk",
+ 0, 1, 2);
+
+ /* Directly on the AMBA interconnect */
+ clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RRR, 3,
+ syscon_vbase + U300_SYSCON_CERR, 3,
+ U300_SYSCON_SBCER_CPU_CLK_EN);
+ clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RRR, 4,
+ syscon_vbase + U300_SYSCON_CERR, 4,
+ U300_SYSCON_SBCER_DMAC_CLK_EN);
+ clk_register_clkdev(clk, NULL, "dma");
+ clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RRR, 6,
+ syscon_vbase + U300_SYSCON_CERR, 6,
+ U300_SYSCON_SBCER_NANDIF_CLK_EN);
+ clk_register_clkdev(clk, NULL, "fsmc-nand");
+ clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RRR, 8,
+ syscon_vbase + U300_SYSCON_CERR, 8,
+ U300_SYSCON_SBCER_XGAM_CLK_EN);
+ clk_register_clkdev(clk, NULL, "xgam");
+ clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RRR, 9,
+ syscon_vbase + U300_SYSCON_CERR, 9,
+ U300_SYSCON_SBCER_SEMI_CLK_EN);
+ clk_register_clkdev(clk, NULL, "semi");
+
+ /* AHB bridge clocks */
+ clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RRR, 10,
+ syscon_vbase + U300_SYSCON_CERR, 10,
+ U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN);
+ clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RRR, 12,
+ syscon_vbase + U300_SYSCON_CERR, 12,
+ /* Cannot be enabled, just taken out of reset */
+ 0xFFFFU);
+ clk_register_clkdev(clk, NULL, "intcon");
+ clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RRR, 5,
+ syscon_vbase + U300_SYSCON_CERR, 5,
+ U300_SYSCON_SBCER_EMIF_CLK_EN);
+ clk_register_clkdev(clk, NULL, "pl172");
+
+ /* FAST bridge clocks */
+ clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RFR, 0,
+ syscon_vbase + U300_SYSCON_CEFR, 0,
+ U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN);
+ clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RFR, 1,
+ syscon_vbase + U300_SYSCON_CEFR, 1,
+ U300_SYSCON_SBCER_I2C0_CLK_EN);
+ clk_register_clkdev(clk, NULL, "stu300.0");
+ clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RFR, 2,
+ syscon_vbase + U300_SYSCON_CEFR, 2,
+ U300_SYSCON_SBCER_I2C1_CLK_EN);
+ clk_register_clkdev(clk, NULL, "stu300.1");
+ clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RFR, 5,
+ syscon_vbase + U300_SYSCON_CEFR, 5,
+ U300_SYSCON_SBCER_MMC_CLK_EN);
+ clk_register_clkdev(clk, "apb_pclk", "mmci");
+ clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RFR, 6,
+ syscon_vbase + U300_SYSCON_CEFR, 6,
+ U300_SYSCON_SBCER_SPI_CLK_EN);
+ /* The SPI has no external clock for the outward bus, uses the pclk */
+ clk_register_clkdev(clk, NULL, "pl022");
+ clk_register_clkdev(clk, "apb_pclk", "pl022");
+
+ /* SLOW bridge clocks */
+ clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true,
+ syscon_vbase + U300_SYSCON_RSR, 0,
+ syscon_vbase + U300_SYSCON_CESR, 0,
+ U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN);
+ clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 1,
+ syscon_vbase + U300_SYSCON_CESR, 1,
+ U300_SYSCON_SBCER_UART_CLK_EN);
+ /* Same clock is used for APB and outward bus */
+ clk_register_clkdev(clk, NULL, "uart0");
+ clk_register_clkdev(clk, "apb_pclk", "uart0");
+ clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 4,
+ syscon_vbase + U300_SYSCON_CESR, 4,
+ U300_SYSCON_SBCER_GPIO_CLK_EN);
+ clk_register_clkdev(clk, NULL, "u300-gpio");
+ clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 5,
+ syscon_vbase + U300_SYSCON_CESR, 6,
+ U300_SYSCON_SBCER_KEYPAD_CLK_EN);
+ clk_register_clkdev(clk, NULL, "coh901461-keypad");
+ clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RSR, 6,
+ /* No clock enable register bit */
+ NULL, 0, 0xFFFFU);
+ clk_register_clkdev(clk, NULL, "rtc-coh901331");
+ clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 7,
+ syscon_vbase + U300_SYSCON_CESR, 7,
+ U300_SYSCON_SBCER_APP_TMR_CLK_EN);
+ clk_register_clkdev(clk, NULL, "apptimer");
+ clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 8,
+ syscon_vbase + U300_SYSCON_CESR, 8,
+ U300_SYSCON_SBCER_ACC_TMR_CLK_EN);
+ clk_register_clkdev(clk, NULL, "timer");
+
+ /* Then this special MMC/SD clock */
+ clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false);
+ clk_register_clkdev(clk, NULL, "mmci");
+}
diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c
new file mode 100644
index 00000000000..e7b7765e85f
--- /dev/null
+++ b/drivers/clk/clk-wm831x.c
@@ -0,0 +1,428 @@
+/*
+ * WM831x clock control
+ *
+ * Copyright 2011-2 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/wm831x/core.h>
+
+struct wm831x_clk {
+ struct wm831x *wm831x;
+ struct clk_hw xtal_hw;
+ struct clk_hw fll_hw;
+ struct clk_hw clkout_hw;
+ struct clk *xtal;
+ struct clk *fll;
+ struct clk *clkout;
+ bool xtal_ena;
+};
+
+static int wm831x_xtal_is_enabled(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ xtal_hw);
+
+ return clkdata->xtal_ena;
+}
+
+static unsigned long wm831x_xtal_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ xtal_hw);
+
+ if (clkdata->xtal_ena)
+ return 32768;
+ else
+ return 0;
+}
+
+static const struct clk_ops wm831x_xtal_ops = {
+ .is_enabled = wm831x_xtal_is_enabled,
+ .recalc_rate = wm831x_xtal_recalc_rate,
+};
+
+static struct clk_init_data wm831x_xtal_init = {
+ .name = "xtal",
+ .ops = &wm831x_xtal_ops,
+ .flags = CLK_IS_ROOT,
+};
+
+static const unsigned long wm831x_fll_auto_rates[] = {
+ 2048000,
+ 11289600,
+ 12000000,
+ 12288000,
+ 19200000,
+ 22579600,
+ 24000000,
+ 24576000,
+};
+
+static int wm831x_fll_is_enabled(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ fll_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_1);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Unable to read FLL_CONTROL_1: %d\n",
+ ret);
+ return true;
+ }
+
+ return (ret & WM831X_FLL_ENA) != 0;
+}
+
+static int wm831x_fll_prepare(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ fll_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2,
+ WM831X_FLL_ENA, WM831X_FLL_ENA);
+ if (ret != 0)
+ dev_crit(wm831x->dev, "Failed to enable FLL: %d\n", ret);
+
+ usleep_range(2000, 2000);
+
+ return ret;
+}
+
+static void wm831x_fll_unprepare(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ fll_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2, WM831X_FLL_ENA, 0);
+ if (ret != 0)
+ dev_crit(wm831x->dev, "Failed to disaable FLL: %d\n", ret);
+}
+
+static unsigned long wm831x_fll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ fll_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+ ret);
+ return 0;
+ }
+
+ if (ret & WM831X_FLL_AUTO)
+ return wm831x_fll_auto_rates[ret & WM831X_FLL_AUTO_FREQ_MASK];
+
+ dev_err(wm831x->dev, "FLL only supported in AUTO mode\n");
+
+ return 0;
+}
+
+static long wm831x_fll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *unused)
+{
+ int best = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++)
+ if (abs(wm831x_fll_auto_rates[i] - rate) <
+ abs(wm831x_fll_auto_rates[best] - rate))
+ best = i;
+
+ return wm831x_fll_auto_rates[best];
+}
+
+static int wm831x_fll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ fll_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++)
+ if (wm831x_fll_auto_rates[i] == rate)
+ break;
+ if (i == ARRAY_SIZE(wm831x_fll_auto_rates))
+ return -EINVAL;
+
+ if (wm831x_fll_is_enabled(hw))
+ return -EPERM;
+
+ return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_2,
+ WM831X_FLL_AUTO_FREQ_MASK, i);
+}
+
+static const char *wm831x_fll_parents[] = {
+ "xtal",
+ "clkin",
+};
+
+static u8 wm831x_fll_get_parent(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ fll_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ /* AUTO mode is always clocked from the crystal */
+ ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+ ret);
+ return 0;
+ }
+
+ if (ret & WM831X_FLL_AUTO)
+ return 0;
+
+ ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_5);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Unable to read FLL_CONTROL_5: %d\n",
+ ret);
+ return 0;
+ }
+
+ switch (ret & WM831X_FLL_CLK_SRC_MASK) {
+ case 0:
+ return 0;
+ case 1:
+ return 1;
+ default:
+ dev_err(wm831x->dev, "Unsupported FLL clock source %d\n",
+ ret & WM831X_FLL_CLK_SRC_MASK);
+ return 0;
+ }
+}
+
+static const struct clk_ops wm831x_fll_ops = {
+ .is_enabled = wm831x_fll_is_enabled,
+ .prepare = wm831x_fll_prepare,
+ .unprepare = wm831x_fll_unprepare,
+ .round_rate = wm831x_fll_round_rate,
+ .recalc_rate = wm831x_fll_recalc_rate,
+ .set_rate = wm831x_fll_set_rate,
+ .get_parent = wm831x_fll_get_parent,
+};
+
+static struct clk_init_data wm831x_fll_init = {
+ .name = "fll",
+ .ops = &wm831x_fll_ops,
+ .parent_names = wm831x_fll_parents,
+ .num_parents = ARRAY_SIZE(wm831x_fll_parents),
+ .flags = CLK_SET_RATE_GATE,
+};
+
+static int wm831x_clkout_is_enabled(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ clkout_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
+ ret);
+ return true;
+ }
+
+ return (ret & WM831X_CLKOUT_ENA) != 0;
+}
+
+static int wm831x_clkout_prepare(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ clkout_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret != 0) {
+ dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+ WM831X_CLKOUT_ENA, WM831X_CLKOUT_ENA);
+ if (ret != 0)
+ dev_crit(wm831x->dev, "Failed to enable CLKOUT: %d\n", ret);
+
+ wm831x_reg_lock(wm831x);
+
+ return ret;
+}
+
+static void wm831x_clkout_unprepare(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ clkout_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret != 0) {
+ dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret);
+ return;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+ WM831X_CLKOUT_ENA, 0);
+ if (ret != 0)
+ dev_crit(wm831x->dev, "Failed to disable CLKOUT: %d\n", ret);
+
+ wm831x_reg_lock(wm831x);
+}
+
+static const char *wm831x_clkout_parents[] = {
+ "xtal",
+ "fll",
+};
+
+static u8 wm831x_clkout_get_parent(struct clk_hw *hw)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ clkout_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
+ ret);
+ return 0;
+ }
+
+ if (ret & WM831X_CLKOUT_SRC)
+ return 0;
+ else
+ return 1;
+}
+
+static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent)
+{
+ struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+ clkout_hw);
+ struct wm831x *wm831x = clkdata->wm831x;
+
+ return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+ WM831X_CLKOUT_SRC,
+ parent << WM831X_CLKOUT_SRC_SHIFT);
+}
+
+static const struct clk_ops wm831x_clkout_ops = {
+ .is_enabled = wm831x_clkout_is_enabled,
+ .prepare = wm831x_clkout_prepare,
+ .unprepare = wm831x_clkout_unprepare,
+ .get_parent = wm831x_clkout_get_parent,
+ .set_parent = wm831x_clkout_set_parent,
+};
+
+static struct clk_init_data wm831x_clkout_init = {
+ .name = "clkout",
+ .ops = &wm831x_clkout_ops,
+ .parent_names = wm831x_clkout_parents,
+ .num_parents = ARRAY_SIZE(wm831x_clkout_parents),
+ .flags = CLK_SET_RATE_PARENT,
+};
+
+static __devinit int wm831x_clk_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_clk *clkdata;
+ int ret;
+
+ clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL);
+ if (!clkdata)
+ return -ENOMEM;
+
+ /* XTAL_ENA can only be set via OTP/InstantConfig so just read once */
+ ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+ ret);
+ return ret;
+ }
+ clkdata->xtal_ena = ret & WM831X_XTAL_ENA;
+
+ clkdata->xtal_hw.init = &wm831x_xtal_init;
+ clkdata->xtal = clk_register(&pdev->dev, &clkdata->xtal_hw);
+ if (!clkdata->xtal)
+ return -EINVAL;
+
+ clkdata->fll_hw.init = &wm831x_fll_init;
+ clkdata->fll = clk_register(&pdev->dev, &clkdata->fll_hw);
+ if (!clkdata->fll) {
+ ret = -EINVAL;
+ goto err_xtal;
+ }
+
+ clkdata->clkout_hw.init = &wm831x_clkout_init;
+ clkdata->clkout = clk_register(&pdev->dev, &clkdata->clkout_hw);
+ if (!clkdata->clkout) {
+ ret = -EINVAL;
+ goto err_fll;
+ }
+
+ dev_set_drvdata(&pdev->dev, clkdata);
+
+ return 0;
+
+err_fll:
+ clk_unregister(clkdata->fll);
+err_xtal:
+ clk_unregister(clkdata->xtal);
+ return ret;
+}
+
+static int __devexit wm831x_clk_remove(struct platform_device *pdev)
+{
+ struct wm831x_clk *clkdata = dev_get_drvdata(&pdev->dev);
+
+ clk_unregister(clkdata->clkout);
+ clk_unregister(clkdata->fll);
+ clk_unregister(clkdata->xtal);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_clk_driver = {
+ .probe = wm831x_clk_probe,
+ .remove = __devexit_p(wm831x_clk_remove),
+ .driver = {
+ .name = "wm831x-clk",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(wm831x_clk_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x clock driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-clk");
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9a1eb0cfa95..c87fdd71056 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -16,6 +16,7 @@
#include <linux/err.h>
#include <linux/list.h>
#include <linux/slab.h>
+#include <linux/of.h>
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
@@ -1235,8 +1236,8 @@ int __clk_init(struct device *dev, struct clk *clk)
* If clk->parents is not NULL we skip this entire block. This allows
* for clock drivers to statically initialize clk->parents.
*/
- if (clk->num_parents && !clk->parents) {
- clk->parents = kmalloc((sizeof(struct clk*) * clk->num_parents),
+ if (clk->num_parents > 1 && !clk->parents) {
+ clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
GFP_KERNEL);
/*
* __clk_lookup returns NULL for parents that have not been
@@ -1550,3 +1551,142 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
return ret;
}
EXPORT_SYMBOL_GPL(clk_notifier_unregister);
+
+#ifdef CONFIG_OF
+/**
+ * struct of_clk_provider - Clock provider registration structure
+ * @link: Entry in global list of clock providers
+ * @node: Pointer to device tree node of clock provider
+ * @get: Get clock callback. Returns NULL or a struct clk for the
+ * given clock specifier
+ * @data: context pointer to be passed into @get callback
+ */
+struct of_clk_provider {
+ struct list_head link;
+
+ struct device_node *node;
+ struct clk *(*get)(struct of_phandle_args *clkspec, void *data);
+ void *data;
+};
+
+static LIST_HEAD(of_clk_providers);
+static DEFINE_MUTEX(of_clk_lock);
+
+struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
+ void *data)
+{
+ return data;
+}
+EXPORT_SYMBOL_GPL(of_clk_src_simple_get);
+
+/**
+ * of_clk_add_provider() - Register a clock provider for a node
+ * @np: Device node pointer associated with clock provider
+ * @clk_src_get: callback for decoding clock
+ * @data: context pointer for @clk_src_get callback.
+ */
+int of_clk_add_provider(struct device_node *np,
+ struct clk *(*clk_src_get)(struct of_phandle_args *clkspec,
+ void *data),
+ void *data)
+{
+ struct of_clk_provider *cp;
+
+ cp = kzalloc(sizeof(struct of_clk_provider), GFP_KERNEL);
+ if (!cp)
+ return -ENOMEM;
+
+ cp->node = of_node_get(np);
+ cp->data = data;
+ cp->get = clk_src_get;
+
+ mutex_lock(&of_clk_lock);
+ list_add(&cp->link, &of_clk_providers);
+ mutex_unlock(&of_clk_lock);
+ pr_debug("Added clock from %s\n", np->full_name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_clk_add_provider);
+
+/**
+ * of_clk_del_provider() - Remove a previously registered clock provider
+ * @np: Device node pointer associated with clock provider
+ */
+void of_clk_del_provider(struct device_node *np)
+{
+ struct of_clk_provider *cp;
+
+ mutex_lock(&of_clk_lock);
+ list_for_each_entry(cp, &of_clk_providers, link) {
+ if (cp->node == np) {
+ list_del(&cp->link);
+ of_node_put(cp->node);
+ kfree(cp);
+ break;
+ }
+ }
+ mutex_unlock(&of_clk_lock);
+}
+EXPORT_SYMBOL_GPL(of_clk_del_provider);
+
+struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
+{
+ struct of_clk_provider *provider;
+ struct clk *clk = ERR_PTR(-ENOENT);
+
+ /* Check if we have such a provider in our array */
+ mutex_lock(&of_clk_lock);
+ list_for_each_entry(provider, &of_clk_providers, link) {
+ if (provider->node == clkspec->np)
+ clk = provider->get(clkspec, provider->data);
+ if (!IS_ERR(clk))
+ break;
+ }
+ mutex_unlock(&of_clk_lock);
+
+ return clk;
+}
+
+const char *of_clk_get_parent_name(struct device_node *np, int index)
+{
+ struct of_phandle_args clkspec;
+ const char *clk_name;
+ int rc;
+
+ if (index < 0)
+ return NULL;
+
+ rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index,
+ &clkspec);
+ if (rc)
+ return NULL;
+
+ if (of_property_read_string_index(clkspec.np, "clock-output-names",
+ clkspec.args_count ? clkspec.args[0] : 0,
+ &clk_name) < 0)
+ clk_name = clkspec.np->name;
+
+ of_node_put(clkspec.np);
+ return clk_name;
+}
+EXPORT_SYMBOL_GPL(of_clk_get_parent_name);
+
+/**
+ * of_clk_init() - Scan and init clock providers from the DT
+ * @matches: array of compatible values and init functions for providers.
+ *
+ * This function scans the device tree for matching clock providers and
+ * calls their initialization functions
+ */
+void __init of_clk_init(const struct of_device_id *matches)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, matches) {
+ const struct of_device_id *match = of_match_node(matches, np);
+ of_clk_init_cb_t clk_init_cb = match->data;
+ clk_init_cb(np);
+ }
+}
+#endif
diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
index c535cf8c577..d423c9bdd71 100644
--- a/drivers/clk/clkdev.c
+++ b/drivers/clk/clkdev.c
@@ -19,10 +19,80 @@
#include <linux/mutex.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/of.h>
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
+#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+struct clk *of_clk_get(struct device_node *np, int index)
+{
+ struct of_phandle_args clkspec;
+ struct clk *clk;
+ int rc;
+
+ if (index < 0)
+ return ERR_PTR(-EINVAL);
+
+ rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index,
+ &clkspec);
+ if (rc)
+ return ERR_PTR(rc);
+
+ clk = of_clk_get_from_provider(&clkspec);
+ of_node_put(clkspec.np);
+ return clk;
+}
+EXPORT_SYMBOL(of_clk_get);
+
+/**
+ * of_clk_get_by_name() - Parse and lookup a clock referenced by a device node
+ * @np: pointer to clock consumer node
+ * @name: name of consumer's clock input, or NULL for the first clock reference
+ *
+ * This function parses the clocks and clock-names properties,
+ * and uses them to look up the struct clk from the registered list of clock
+ * providers.
+ */
+struct clk *of_clk_get_by_name(struct device_node *np, const char *name)
+{
+ struct clk *clk = ERR_PTR(-ENOENT);
+
+ /* Walk up the tree of devices looking for a clock that matches */
+ while (np) {
+ int index = 0;
+
+ /*
+ * For named clocks, first look up the name in the
+ * "clock-names" property. If it cannot be found, then
+ * index will be an error code, and of_clk_get() will fail.
+ */
+ if (name)
+ index = of_property_match_string(np, "clock-names", name);
+ clk = of_clk_get(np, index);
+ if (!IS_ERR(clk))
+ break;
+ else if (name && index >= 0) {
+ pr_err("ERROR: could not get clock %s:%s(%i)\n",
+ np->full_name, name ? name : "", index);
+ return clk;
+ }
+
+ /*
+ * No matching clock found on this node. If the parent node
+ * has a "clock-ranges" property, then we can try one of its
+ * clocks.
+ */
+ np = np->parent;
+ if (np && !of_get_property(np, "clock-ranges", NULL))
+ break;
+ }
+
+ return clk;
+}
+EXPORT_SYMBOL(of_clk_get_by_name);
+#endif
+
/*
* Find the correct struct clk for the device and connection ID.
* We do slightly fuzzy matching here:
@@ -83,6 +153,13 @@ EXPORT_SYMBOL(clk_get_sys);
struct clk *clk_get(struct device *dev, const char *con_id)
{
const char *dev_id = dev ? dev_name(dev) : NULL;
+ struct clk *clk;
+
+ if (dev) {
+ clk = of_clk_get_by_name(dev->of_node, con_id);
+ if (!IS_ERR(clk) && __clk_get(clk))
+ return clk;
+ }
return clk_get_sys(dev_id, con_id);
}
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index db2391c054e..844043ad0fe 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -106,7 +106,7 @@ static struct clk_lookup lcdif_lookups[] = {
static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx23-gpmi-nand", },
- { .dev_id = "8000c000.gpmi", },
+ { .dev_id = "8000c000.gpmi-nand", },
};
static const char *sel_pll[] __initconst = { "pll", "ref_xtal", };
@@ -189,6 +189,7 @@ int __init mx23_clocks_init(void)
}
clk_register_clkdev(clks[clk32k], NULL, "timrot");
+ clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index 7fad6c8c13d..e3aab67b3eb 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -112,11 +112,11 @@ static void __init clk_misc_init(void)
/*
* 480 MHz seems too high to be ssp clock source directly,
- * so set frac0 to get a 288 MHz ref_io0.
+ * so set frac0 to get a 288 MHz ref_io0 and ref_io1.
*/
val = readl_relaxed(FRAC0);
- val &= ~(0x3f << BP_FRAC0_IO0FRAC);
- val |= 30 << BP_FRAC0_IO0FRAC;
+ val &= ~((0x3f << BP_FRAC0_IO0FRAC) | (0x3f << BP_FRAC0_IO1FRAC));
+ val |= (30 << BP_FRAC0_IO0FRAC) | (30 << BP_FRAC0_IO1FRAC);
writel_relaxed(val, FRAC0);
}
@@ -174,7 +174,7 @@ static struct clk_lookup lcdif_lookups[] = {
static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx28-gpmi-nand", },
- { .dev_id = "8000c000.gpmi", },
+ { .dev_id = "8000c000.gpmi-nand", },
};
static struct clk_lookup fec_lookups[] = {
@@ -314,6 +314,7 @@ int __init mx28_clocks_init(void)
clk_register_clkdev(clks[clk32k], NULL, "timrot");
clk_register_clkdev(clks[enet_out], NULL, "enet_out");
+ clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
@@ -328,6 +329,10 @@ int __init mx28_clocks_init(void)
clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups));
clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups));
clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups));
+ clk_register_clkdev(clks[usb0_pwr], NULL, "8007c000.usbphy");
+ clk_register_clkdev(clks[usb1_pwr], NULL, "8007e000.usbphy");
+ clk_register_clkdev(clks[usb0], NULL, "80080000.usb");
+ clk_register_clkdev(clks[usb1], NULL, "80090000.usb");
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
new file mode 100644
index 00000000000..50cf6a2ee69
--- /dev/null
+++ b/drivers/clk/versatile/Makefile
@@ -0,0 +1,3 @@
+# Makefile for Versatile-specific clocks
+obj-$(CONFIG_ICST) += clk-icst.o
+obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
new file mode 100644
index 00000000000..f555b50a5fa
--- /dev/null
+++ b/drivers/clk/versatile/clk-icst.c
@@ -0,0 +1,100 @@
+/*
+ * Driver for the ICST307 VCO clock found in the ARM Reference designs.
+ * We wrap the custom interface from <asm/hardware/icst.h> into the generic
+ * clock framework.
+ *
+ * TODO: when all ARM reference designs are migrated to generic clocks, the
+ * ICST clock code from the ARM tree should probably be merged into this
+ * file.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+
+#include "clk-icst.h"
+
+/**
+ * struct clk_icst - ICST VCO clock wrapper
+ * @hw: corresponding clock hardware entry
+ * @params: parameters for this ICST instance
+ * @rate: current rate
+ * @setvco: function to commit ICST settings to hardware
+ */
+struct clk_icst {
+ struct clk_hw hw;
+ const struct icst_params *params;
+ unsigned long rate;
+ struct icst_vco (*getvco)(void);
+ void (*setvco)(struct icst_vco);
+};
+
+#define to_icst(_hw) container_of(_hw, struct clk_icst, hw)
+
+static unsigned long icst_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_icst *icst = to_icst(hw);
+ struct icst_vco vco;
+
+ vco = icst->getvco();
+ icst->rate = icst_hz(icst->params, vco);
+ return icst->rate;
+}
+
+static long icst_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_icst *icst = to_icst(hw);
+ struct icst_vco vco;
+
+ vco = icst_hz_to_vco(icst->params, rate);
+ return icst_hz(icst->params, vco);
+}
+
+static int icst_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_icst *icst = to_icst(hw);
+ struct icst_vco vco;
+
+ vco = icst_hz_to_vco(icst->params, rate);
+ icst->rate = icst_hz(icst->params, vco);
+ icst->setvco(vco);
+ return 0;
+}
+
+static const struct clk_ops icst_ops = {
+ .recalc_rate = icst_recalc_rate,
+ .round_rate = icst_round_rate,
+ .set_rate = icst_set_rate,
+};
+
+struct clk * __init icst_clk_register(struct device *dev,
+ const struct clk_icst_desc *desc)
+{
+ struct clk *clk;
+ struct clk_icst *icst;
+ struct clk_init_data init;
+
+ icst = kzalloc(sizeof(struct clk_icst), GFP_KERNEL);
+ if (!icst) {
+ pr_err("could not allocate ICST clock!\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ init.name = "icst";
+ init.ops = &icst_ops;
+ init.flags = CLK_IS_ROOT;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ icst->hw.init = &init;
+ icst->params = desc->params;
+ icst->getvco = desc->getvco;
+ icst->setvco = desc->setvco;
+
+ clk = clk_register(dev, &icst->hw);
+ if (IS_ERR(clk))
+ kfree(icst);
+
+ return clk;
+}
diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
new file mode 100644
index 00000000000..71b4c56c141
--- /dev/null
+++ b/drivers/clk/versatile/clk-icst.h
@@ -0,0 +1,10 @@
+#include <asm/hardware/icst.h>
+
+struct clk_icst_desc {
+ const struct icst_params *params;
+ struct icst_vco (*getvco)(void);
+ void (*setvco)(struct icst_vco);
+};
+
+struct clk *icst_clk_register(struct device *dev,
+ const struct clk_icst_desc *desc);
diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c
new file mode 100644
index 00000000000..a5053921bf7
--- /dev/null
+++ b/drivers/clk/versatile/clk-integrator.c
@@ -0,0 +1,111 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM Integrator/AP and Integrator/CP clock tree.
+ * Inspired by portions of:
+ * plat-versatile/clock.c and plat-versatile/include/plat/clock.h
+ */
+#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
+
+/**
+ * cp_auxvco_get() - get ICST VCO settings for the Integrator/CP
+ * @vco: ICST VCO parameters to update with hardware status
+ */
+static struct icst_vco cp_auxvco_get(void)
+{
+ u32 val;
+ struct icst_vco vco;
+
+ val = readl(CM_AUXOSC);
+ vco.v = val & 0x1ff;
+ vco.r = (val >> 9) & 0x7f;
+ vco.s = (val >> 16) & 03;
+ return vco;
+}
+
+/**
+ * cp_auxvco_set() - commit changes to Integrator/CP ICST VCO
+ * @vco: ICST VCO parameters to commit
+ */
+static void cp_auxvco_set(struct icst_vco vco)
+{
+ u32 val;
+
+ val = readl(CM_AUXOSC) & ~0x7ffff;
+ val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+ /* This magic unlocks the CM VCO so it can be controlled */
+ writel(0xa05f, CM_LOCK);
+ writel(val, CM_AUXOSC);
+ /* This locks the CM again */
+ writel(0, CM_LOCK);
+}
+
+static const struct icst_params cp_auxvco_params = {
+ .ref = 24000000,
+ .vco_max = ICST525_VCO_MAX_5V,
+ .vco_min = ICST525_VCO_MIN,
+ .vd_min = 8,
+ .vd_max = 263,
+ .rd_min = 3,
+ .rd_max = 65,
+ .s2div = icst525_s2div,
+ .idx2s = icst525_idx2s,
+};
+
+static const struct clk_icst_desc __initdata cp_icst_desc = {
+ .params = &cp_auxvco_params,
+ .getvco = cp_auxvco_get,
+ .setvco = cp_auxvco_set,
+};
+
+/*
+ * integrator_clk_init() - set up the integrator clock tree
+ * @is_cp: pass true if it's the Integrator/CP else AP is assumed
+ */
+void __init integrator_clk_init(bool is_cp)
+{
+ struct clk *clk;
+
+ /* APB clock dummy */
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ /* UART reference clock */
+ clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
+ 14745600);
+ clk_register_clkdev(clk, NULL, "uart0");
+ clk_register_clkdev(clk, NULL, "uart1");
+ if (is_cp)
+ clk_register_clkdev(clk, NULL, "mmci");
+
+ /* 24 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, NULL, "kmi0");
+ clk_register_clkdev(clk, NULL, "kmi1");
+ if (!is_cp)
+ clk_register_clkdev(clk, NULL, "ap_timer");
+
+ if (!is_cp)
+ return;
+
+ /* 1 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+ 1000000);
+ clk_register_clkdev(clk, NULL, "sp804");
+
+ /* ICST VCO clock used on the Integrator/CP CLCD */
+ clk = icst_clk_register(NULL, &cp_icst_desc);
+ clk_register_clkdev(clk, NULL, "clcd");
+}