Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...

8 files changed, 1146 insertions, 74 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 9002185a0a1..7bc6e51757e 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -31,6 +31,9 @@ config SUN4I_TIMER
 config VT8500_TIMER
 	bool
 
+config CADENCE_TTC_TIMER
+	bool
+
 config CLKSRC_NOMADIK_MTU
 	bool
 	depends on (ARCH_NOMADIK || ARCH_U8500)
@@ -67,3 +70,8 @@ config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
 	help
 	  This option enables support for the Meta per-thread timers.
+
+config CLKSRC_EXYNOS_MCT
+	def_bool y if ARCH_EXYNOS
+	help
+	  Support for Multi Core Timer controller on Exynos SoCs.
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 682d48d0816..caacdb63aff 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -23,6 +23,8 @@ obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
 obj-$(CONFIG_ARCH_BCM)		+= bcm_kona_timer.o
+obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence_ttc_timer.o
+obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
new file mode 100644
index 00000000000..685bc60e210
--- /dev/null
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -0,0 +1,436 @@
+/*
+ * This file contains driver for the Cadence Triple Timer Counter Rev 06
+ *
+ *  Copyright (C) 2011-2013 Xilinx
+ *
+ * based on arch/mips/kernel/time.c timer driver
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+
+/*
+ * This driver configures the 2 16-bit count-up timers as follows:
+ *
+ * T1: Timer 1, clocksource for generic timekeeping
+ * T2: Timer 2, clockevent source for hrtimers
+ * T3: Timer 3, <unused>
+ *
+ * The input frequency to the timer module for emulation is 2.5MHz which is
+ * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
+ * the timers are clocked at 78.125KHz (12.8 us resolution).
+
+ * The input frequency to the timer module in silicon is configurable and
+ * obtained from device tree. The pre-scaler of 32 is used.
+ */
+
+/*
+ * Timer Register Offset Definitions of Timer 1, Increment base address by 4
+ * and use same offsets for Timer 2
+ */
+#define TTC_CLK_CNTRL_OFFSET		0x00 /* Clock Control Reg, RW */
+#define TTC_CNT_CNTRL_OFFSET		0x0C /* Counter Control Reg, RW */
+#define TTC_COUNT_VAL_OFFSET		0x18 /* Counter Value Reg, RO */
+#define TTC_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
+#define TTC_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
+#define TTC_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
+
+#define TTC_CNT_CNTRL_DISABLE_MASK	0x1
+
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
+ * work across most input frequency, but it may need to be more dynamic
+ */
+#define PRESCALE_EXPONENT	11	/* 2 ^ PRESCALE_EXPONENT = PRESCALE */
+#define PRESCALE		2048	/* The exponent must match this */
+#define CLK_CNTRL_PRESCALE	((PRESCALE_EXPONENT - 1) << 1)
+#define CLK_CNTRL_PRESCALE_EN	1
+#define CNT_CNTRL_RESET		(1 << 4)
+
+/**
+ * struct ttc_timer - This definition defines local timer structure
+ *
+ * @base_addr:	Base address of timer
+ * @clk:	Associated clock source
+ * @clk_rate_change_nb	Notifier block for clock rate changes
+ */
+struct ttc_timer {
+	void __iomem *base_addr;
+	struct clk *clk;
+	struct notifier_block clk_rate_change_nb;
+};
+
+#define to_ttc_timer(x) \
+		container_of(x, struct ttc_timer, clk_rate_change_nb)
+
+struct ttc_timer_clocksource {
+	struct ttc_timer	ttc;
+	struct clocksource	cs;
+};
+
+#define to_ttc_timer_clksrc(x) \
+		container_of(x, struct ttc_timer_clocksource, cs)
+
+struct ttc_timer_clockevent {
+	struct ttc_timer		ttc;
+	struct clock_event_device	ce;
+};
+
+#define to_ttc_timer_clkevent(x) \
+		container_of(x, struct ttc_timer_clockevent, ce)
+
+/**
+ * ttc_set_interval - Set the timer interval value
+ *
+ * @timer:	Pointer to the timer instance
+ * @cycles:	Timer interval ticks
+ **/
+static void ttc_set_interval(struct ttc_timer *timer,
+					unsigned long cycles)
+{
+	u32 ctrl_reg;
+
+	/* Disable the counter, set the counter value  and re-enable counter */
+	ctrl_reg = __raw_readl(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+	__raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+
+	__raw_writel(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET);
+
+	/*
+	 * Reset the counter (0x10) so that it starts from 0, one-shot
+	 * mode makes this needed for timing to be right.
+	 */
+	ctrl_reg |= CNT_CNTRL_RESET;
+	ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+	__raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+}
+
+/**
+ * ttc_clock_event_interrupt - Clock event timer interrupt handler
+ *
+ * @irq:	IRQ number of the Timer
+ * @dev_id:	void pointer to the ttc_timer instance
+ *
+ * returns: Always IRQ_HANDLED - success
+ **/
+static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id)
+{
+	struct ttc_timer_clockevent *ttce = dev_id;
+	struct ttc_timer *timer = &ttce->ttc;
+
+	/* Acknowledge the interrupt and call event handler */
+	__raw_readl(timer->base_addr + TTC_ISR_OFFSET);
+
+	ttce->ce.event_handler(&ttce->ce);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * __ttc_clocksource_read - Reads the timer counter register
+ *
+ * returns: Current timer counter register value
+ **/
+static cycle_t __ttc_clocksource_read(struct clocksource *cs)
+{
+	struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc;
+
+	return (cycle_t)__raw_readl(timer->base_addr +
+				TTC_COUNT_VAL_OFFSET);
+}
+
+/**
+ * ttc_set_next_event - Sets the time interval for next event
+ *
+ * @cycles:	Timer interval ticks
+ * @evt:	Address of clock event instance
+ *
+ * returns: Always 0 - success
+ **/
+static int ttc_set_next_event(unsigned long cycles,
+					struct clock_event_device *evt)
+{
+	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+	struct ttc_timer *timer = &ttce->ttc;
+
+	ttc_set_interval(timer, cycles);
+	return 0;
+}
+
+/**
+ * ttc_set_mode - Sets the mode of timer
+ *
+ * @mode:	Mode to be set
+ * @evt:	Address of clock event instance
+ **/
+static void ttc_set_mode(enum clock_event_mode mode,
+					struct clock_event_device *evt)
+{
+	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+	struct ttc_timer *timer = &ttce->ttc;
+	u32 ctrl_reg;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		ttc_set_interval(timer,
+				DIV_ROUND_CLOSEST(clk_get_rate(ttce->ttc.clk),
+					PRESCALE * HZ));
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		ctrl_reg = __raw_readl(timer->base_addr +
+					TTC_CNT_CNTRL_OFFSET);
+		ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+		__raw_writel(ctrl_reg,
+				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		ctrl_reg = __raw_readl(timer->base_addr +
+					TTC_CNT_CNTRL_OFFSET);
+		ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+		__raw_writel(ctrl_reg,
+				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+		break;
+	}
+}
+
+static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
+		unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct ttc_timer *ttc = to_ttc_timer(nb);
+	struct ttc_timer_clocksource *ttccs = container_of(ttc,
+			struct ttc_timer_clocksource, ttc);
+
+	switch (event) {
+	case POST_RATE_CHANGE:
+		/*
+		 * Do whatever is necessary to maintain a proper time base
+		 *
+		 * I cannot find a way to adjust the currently used clocksource
+		 * to the new frequency. __clocksource_updatefreq_hz() sounds
+		 * good, but does not work. Not sure what's that missing.
+		 *
+		 * This approach works, but triggers two clocksource switches.
+		 * The first after unregister to clocksource jiffies. And
+		 * another one after the register to the newly registered timer.
+		 *
+		 * Alternatively we could 'waste' another HW timer to ping pong
+		 * between clock sources. That would also use one register and
+		 * one unregister call, but only trigger one clocksource switch
+		 * for the cost of another HW timer used by the OS.
+		 */
+		clocksource_unregister(&ttccs->cs);
+		clocksource_register_hz(&ttccs->cs,
+				ndata->new_rate / PRESCALE);
+		/* fall through */
+	case PRE_RATE_CHANGE:
+	case ABORT_RATE_CHANGE:
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
+{
+	struct ttc_timer_clocksource *ttccs;
+	int err;
+
+	ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
+	if (WARN_ON(!ttccs))
+		return;
+
+	ttccs->ttc.clk = clk;
+
+	err = clk_prepare_enable(ttccs->ttc.clk);
+	if (WARN_ON(err)) {
+		kfree(ttccs);
+		return;
+	}
+
+	ttccs->ttc.clk_rate_change_nb.notifier_call =
+		ttc_rate_change_clocksource_cb;
+	ttccs->ttc.clk_rate_change_nb.next = NULL;
+	if (clk_notifier_register(ttccs->ttc.clk,
+				&ttccs->ttc.clk_rate_change_nb))
+		pr_warn("Unable to register clock notifier.\n");
+
+	ttccs->ttc.base_addr = base;
+	ttccs->cs.name = "ttc_clocksource";
+	ttccs->cs.rating = 200;
+	ttccs->cs.read = __ttc_clocksource_read;
+	ttccs->cs.mask = CLOCKSOURCE_MASK(16);
+	ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/*
+	 * Setup the clock source counter to be an incrementing counter
+	 * with no interrupt and it rolls over at 0xFFFF. Pre-scale
+	 * it by 32 also. Let it start running now.
+	 */
+	__raw_writel(0x0,  ttccs->ttc.base_addr + TTC_IER_OFFSET);
+	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+		     ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+	__raw_writel(CNT_CNTRL_RESET,
+		     ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+
+	err = clocksource_register_hz(&ttccs->cs,
+			clk_get_rate(ttccs->ttc.clk) / PRESCALE);
+	if (WARN_ON(err)) {
+		kfree(ttccs);
+		return;
+	}
+}
+
+static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
+		unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct ttc_timer *ttc = to_ttc_timer(nb);
+	struct ttc_timer_clockevent *ttcce = container_of(ttc,
+			struct ttc_timer_clockevent, ttc);
+
+	switch (event) {
+	case POST_RATE_CHANGE:
+	{
+		unsigned long flags;
+
+		/*
+		 * clockevents_update_freq should be called with IRQ disabled on
+		 * the CPU the timer provides events for. The timer we use is
+		 * common to both CPUs, not sure if we need to run on both
+		 * cores.
+		 */
+		local_irq_save(flags);
+		clockevents_update_freq(&ttcce->ce,
+				ndata->new_rate / PRESCALE);
+		local_irq_restore(flags);
+
+		/* fall through */
+	}
+	case PRE_RATE_CHANGE:
+	case ABORT_RATE_CHANGE:
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static void __init ttc_setup_clockevent(struct clk *clk,
+						void __iomem *base, u32 irq)
+{
+	struct ttc_timer_clockevent *ttcce;
+	int err;
+
+	ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
+	if (WARN_ON(!ttcce))
+		return;
+
+	ttcce->ttc.clk = clk;
+
+	err = clk_prepare_enable(ttcce->ttc.clk);
+	if (WARN_ON(err)) {
+		kfree(ttcce);
+		return;
+	}
+
+	ttcce->ttc.clk_rate_change_nb.notifier_call =
+		ttc_rate_change_clockevent_cb;
+	ttcce->ttc.clk_rate_change_nb.next = NULL;
+	if (clk_notifier_register(ttcce->ttc.clk,
+				&ttcce->ttc.clk_rate_change_nb))
+		pr_warn("Unable to register clock notifier.\n");
+
+	ttcce->ttc.base_addr = base;
+	ttcce->ce.name = "ttc_clockevent";
+	ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	ttcce->ce.set_next_event = ttc_set_next_event;
+	ttcce->ce.set_mode = ttc_set_mode;
+	ttcce->ce.rating = 200;
+	ttcce->ce.irq = irq;
+	ttcce->ce.cpumask = cpu_possible_mask;
+
+	/*
+	 * Setup the clock event timer to be an interval timer which
+	 * is prescaled by 32 using the interval interrupt. Leave it
+	 * disabled for now.
+	 */
+	__raw_writel(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+		     ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+	__raw_writel(0x1,  ttcce->ttc.base_addr + TTC_IER_OFFSET);
+
+	err = request_irq(irq, ttc_clock_event_interrupt,
+			  IRQF_DISABLED | IRQF_TIMER,
+			  ttcce->ce.name, ttcce);
+	if (WARN_ON(err)) {
+		kfree(ttcce);
+		return;
+	}
+
+	clockevents_config_and_register(&ttcce->ce,
+			clk_get_rate(ttcce->ttc.clk) / PRESCALE, 1, 0xfffe);
+}
+
+/**
+ * ttc_timer_init - Initialize the timer
+ *
+ * Initializes the timer hardware and register the clock source and clock event
+ * timers with Linux kernal timer framework
+ */
+static void __init ttc_timer_init(struct device_node *timer)
+{
+	unsigned int irq;
+	void __iomem *timer_baseaddr;
+	struct clk *clk;
+	static int initialized;
+
+	if (initialized)
+		return;
+
+	initialized = 1;
+
+	/*
+	 * Get the 1st Triple Timer Counter (TTC) block from the device tree
+	 * and use it. Note that the event timer uses the interrupt and it's the
+	 * 2nd TTC hence the irq_of_parse_and_map(,1)
+	 */
+	timer_baseaddr = of_iomap(timer, 0);
+	if (!timer_baseaddr) {
+		pr_err("ERROR: invalid timer base address\n");
+		BUG();
+	}
+
+	irq = irq_of_parse_and_map(timer, 1);
+	if (irq <= 0) {
+		pr_err("ERROR: invalid interrupt number\n");
+		BUG();
+	}
+
+	clk = of_clk_get_by_name(timer, "cpu_1x");
+	if (IS_ERR(clk)) {
+		pr_err("ERROR: timer input clock not found\n");
+		BUG();
+	}
+
+	ttc_setup_clocksource(clk, timer_baseaddr);
+	ttc_setup_clockevent(clk, timer_baseaddr + 4, irq);
+
+	pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq);
+}
+
+CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c
index e6a553cb73e..4329a29a531 100644
--- a/drivers/clocksource/em_sti.c
+++ b/drivers/clocksource/em_sti.c
@@ -399,7 +399,18 @@ static struct platform_driver em_sti_device_driver = {
 	}
 };
 
-module_platform_driver(em_sti_device_driver);
+static int __init em_sti_init(void)
+{
+	return platform_driver_register(&em_sti_device_driver);
+}
+
+static void __exit em_sti_exit(void)
+{
+	platform_driver_unregister(&em_sti_device_driver);
+}
+
+subsys_initcall(em_sti_init);
+module_exit(em_sti_exit);
 
 MODULE_AUTHOR("Magnus Damm");
 MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver");
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
new file mode 100644
index 00000000000..661026834b2
--- /dev/null
+++ b/drivers/clocksource/exynos_mct.c
@@ -0,0 +1,568 @@
+/* linux/arch/arm/mach-exynos4/mct.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4 MCT(Multi-Core Timer) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/percpu.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clocksource.h>
+
+#include <asm/arch_timer.h>
+#include <asm/localtimer.h>
+
+#include <plat/cpu.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <asm/mach/time.h>
+
+#define EXYNOS4_MCTREG(x)		(x)
+#define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
+#define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
+#define EXYNOS4_MCT_G_CNT_WSTAT		EXYNOS4_MCTREG(0x110)
+#define EXYNOS4_MCT_G_COMP0_L		EXYNOS4_MCTREG(0x200)
+#define EXYNOS4_MCT_G_COMP0_U		EXYNOS4_MCTREG(0x204)
+#define EXYNOS4_MCT_G_COMP0_ADD_INCR	EXYNOS4_MCTREG(0x208)
+#define EXYNOS4_MCT_G_TCON		EXYNOS4_MCTREG(0x240)
+#define EXYNOS4_MCT_G_INT_CSTAT		EXYNOS4_MCTREG(0x244)
+#define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
+#define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
+#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK		(0xffffff00)
+
+#define MCT_L_TCNTB_OFFSET		(0x00)
+#define MCT_L_ICNTB_OFFSET		(0x08)
+#define MCT_L_TCON_OFFSET		(0x20)
+#define MCT_L_INT_CSTAT_OFFSET		(0x30)
+#define MCT_L_INT_ENB_OFFSET		(0x34)
+#define MCT_L_WSTAT_OFFSET		(0x40)
+#define MCT_G_TCON_START		(1 << 8)
+#define MCT_G_TCON_COMP0_AUTO_INC	(1 << 1)
+#define MCT_G_TCON_COMP0_ENABLE		(1 << 0)
+#define MCT_L_TCON_INTERVAL_MODE	(1 << 2)
+#define MCT_L_TCON_INT_START		(1 << 1)
+#define MCT_L_TCON_TIMER_START		(1 << 0)
+
+#define TICK_BASE_CNT	1
+
+enum {
+	MCT_INT_SPI,
+	MCT_INT_PPI
+};
+
+enum {
+	MCT_G0_IRQ,
+	MCT_G1_IRQ,
+	MCT_G2_IRQ,
+	MCT_G3_IRQ,
+	MCT_L0_IRQ,
+	MCT_L1_IRQ,
+	MCT_L2_IRQ,
+	MCT_L3_IRQ,
+	MCT_NR_IRQS,
+};
+
+static void __iomem *reg_base;
+static unsigned long clk_rate;
+static unsigned int mct_int_type;
+static int mct_irqs[MCT_NR_IRQS];
+
+struct mct_clock_event_device {
+	struct clock_event_device *evt;
+	unsigned long base;
+	char name[10];
+};
+
+static void exynos4_mct_write(unsigned int value, unsigned long offset)
+{
+	unsigned long stat_addr;
+	u32 mask;
+	u32 i;
+
+	__raw_writel(value, reg_base + offset);
+
+	if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
+		stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
+		switch (offset & EXYNOS4_MCT_L_MASK) {
+		case MCT_L_TCON_OFFSET:
+			mask = 1 << 3;		/* L_TCON write status */
+			break;
+		case MCT_L_ICNTB_OFFSET:
+			mask = 1 << 1;		/* L_ICNTB write status */
+			break;
+		case MCT_L_TCNTB_OFFSET:
+			mask = 1 << 0;		/* L_TCNTB write status */
+			break;
+		default:
+			return;
+		}
+	} else {
+		switch (offset) {
+		case EXYNOS4_MCT_G_TCON:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 16;		/* G_TCON write status */
+			break;
+		case EXYNOS4_MCT_G_COMP0_L:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 0;		/* G_COMP0_L write status */
+			break;
+		case EXYNOS4_MCT_G_COMP0_U:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 1;		/* G_COMP0_U write status */
+			break;
+		case EXYNOS4_MCT_G_COMP0_ADD_INCR:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 2;		/* G_COMP0_ADD_INCR w status */
+			break;
+		case EXYNOS4_MCT_G_CNT_L:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 0;		/* G_CNT_L write status */
+			break;
+		case EXYNOS4_MCT_G_CNT_U:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 1;		/* G_CNT_U write status */
+			break;
+		default:
+			return;
+		}
+	}
+
+	/* Wait maximum 1 ms until written values are applied */
+	for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
+		if (__raw_readl(reg_base + stat_addr) & mask) {
+			__raw_writel(mask, reg_base + stat_addr);
+			return;
+		}
+
+	panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
+}
+
+/* Clocksource handling */
+static void exynos4_mct_frc_start(u32 hi, u32 lo)
+{
+	u32 reg;
+
+	exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
+	exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
+
+	reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+	reg |= MCT_G_TCON_START;
+	exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
+}
+
+static cycle_t exynos4_frc_read(struct clocksource *cs)
+{
+	unsigned int lo, hi;
+	u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
+
+	do {
+		hi = hi2;
+		lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L);
+		hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
+	} while (hi != hi2);
+
+	return ((cycle_t)hi << 32) | lo;
+}
+
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+	exynos4_mct_frc_start(0, 0);
+}
+
+struct clocksource mct_frc = {
+	.name		= "mct-frc",
+	.rating		= 400,
+	.read		= exynos4_frc_read,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.resume		= exynos4_frc_resume,
+};
+
+static void __init exynos4_clocksource_init(void)
+{
+	exynos4_mct_frc_start(0, 0);
+
+	if (clocksource_register_hz(&mct_frc, clk_rate))
+		panic("%s: can't register clocksource\n", mct_frc.name);
+}
+
+static void exynos4_mct_comp0_stop(void)
+{
+	unsigned int tcon;
+
+	tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+	tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
+
+	exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
+	exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
+}
+
+static void exynos4_mct_comp0_start(enum clock_event_mode mode,
+				    unsigned long cycles)
+{
+	unsigned int tcon;
+	cycle_t comp_cycle;
+
+	tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
+
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		tcon |= MCT_G_TCON_COMP0_AUTO_INC;
+		exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
+	}
+
+	comp_cycle = exynos4_frc_read(&mct_frc) + cycles;
+	exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
+	exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
+
+	exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB);
+
+	tcon |= MCT_G_TCON_COMP0_ENABLE;
+	exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON);
+}
+
+static int exynos4_comp_set_next_event(unsigned long cycles,
+				       struct clock_event_device *evt)
+{
+	exynos4_mct_comp0_start(evt->mode, cycles);
+
+	return 0;
+}
+
+static void exynos4_comp_set_mode(enum clock_event_mode mode,
+				  struct clock_event_device *evt)
+{
+	unsigned long cycles_per_jiffy;
+	exynos4_mct_comp0_stop();
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		cycles_per_jiffy =
+			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
+		exynos4_mct_comp0_start(mode, cycles_per_jiffy);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device mct_comp_device = {
+	.name		= "mct-comp",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 250,
+	.set_next_event	= exynos4_comp_set_next_event,
+	.set_mode	= exynos4_comp_set_mode,
+};
+
+static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mct_comp_event_irq = {
+	.name		= "mct_comp_irq",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= exynos4_mct_comp_isr,
+	.dev_id		= &mct_comp_device,
+};
+
+static void exynos4_clockevent_init(void)
+{
+	mct_comp_device.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&mct_comp_device, clk_rate,
+					0xf, 0xffffffff);
+	setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
+}
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
+/* Clock event handling */
+static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
+{
+	unsigned long tmp;
+	unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
+	unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
+
+	tmp = __raw_readl(reg_base + offset);
+	if (tmp & mask) {
+		tmp &= ~mask;
+		exynos4_mct_write(tmp, offset);
+	}
+}
+
+static void exynos4_mct_tick_start(unsigned long cycles,
+				   struct mct_clock_event_device *mevt)
+{
+	unsigned long tmp;
+
+	exynos4_mct_tick_stop(mevt);
+
+	tmp = (1 << 31) | cycles;	/* MCT_L_UPDATE_ICNTB */
+
+	/* update interrupt count buffer */
+	exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
+
+	/* enable MCT tick interrupt */
+	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
+
+	tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET);
+	tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
+	       MCT_L_TCON_INTERVAL_MODE;
+	exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
+}
+
+static int exynos4_tick_set_next_event(unsigned long cycles,
+				       struct clock_event_device *evt)
+{
+	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+
+	exynos4_mct_tick_start(cycles, mevt);
+
+	return 0;
+}
+
+static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
+					 struct clock_event_device *evt)
+{
+	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+	unsigned long cycles_per_jiffy;
+
+	exynos4_mct_tick_stop(mevt);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		cycles_per_jiffy =
+			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
+		exynos4_mct_tick_start(cycles_per_jiffy, mevt);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+{
+	struct clock_event_device *evt = mevt->evt;
+
+	/*
+	 * This is for supporting oneshot mode.
+	 * Mct would generate interrupt periodically
+	 * without explicit stopping.
+	 */
+	if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
+		exynos4_mct_tick_stop(mevt);
+
+	/* Clear the MCT tick interrupt */
+	if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+	struct mct_clock_event_device *mevt = dev_id;
+	struct clock_event_device *evt = mevt->evt;
+
+	exynos4_mct_tick_clear(mevt);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mct_tick0_event_irq = {
+	.name		= "mct_tick0_irq",
+	.flags		= IRQF_TIMER | IRQF_NOBALANCING,
+	.handler	= exynos4_mct_tick_isr,
+};
+
+static struct irqaction mct_tick1_event_irq = {
+	.name		= "mct_tick1_irq",
+	.flags		= IRQF_TIMER | IRQF_NOBALANCING,
+	.handler	= exynos4_mct_tick_isr,
+};
+
+static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
+{
+	struct mct_clock_event_device *mevt;
+	unsigned int cpu = smp_processor_id();
+
+	mevt = this_cpu_ptr(&percpu_mct_tick);
+	mevt->evt = evt;
+
+	mevt->base = EXYNOS4_MCT_L_BASE(cpu);
+	sprintf(mevt->name, "mct_tick%d", cpu);
+
+	evt->name = mevt->name;
+	evt->cpumask = cpumask_of(cpu);
+	evt->set_next_event = exynos4_tick_set_next_event;
+	evt->set_mode = exynos4_tick_set_mode;
+	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	evt->rating = 450;
+	clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
+					0xf, 0x7fffffff);
+
+	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
+
+	if (mct_int_type == MCT_INT_SPI) {
+		if (cpu == 0) {
+			mct_tick0_event_irq.dev_id = mevt;
+			evt->irq = mct_irqs[MCT_L0_IRQ];
+			setup_irq(evt->irq, &mct_tick0_event_irq);
+		} else {
+			mct_tick1_event_irq.dev_id = mevt;
+			evt->irq = mct_irqs[MCT_L1_IRQ];
+			setup_irq(evt->irq, &mct_tick1_event_irq);
+			irq_set_affinity(evt->irq, cpumask_of(1));
+		}
+	} else {
+		enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
+	}
+
+	return 0;
+}
+
+static void exynos4_local_timer_stop(struct clock_event_device *evt)
+{
+	unsigned int cpu = smp_processor_id();
+	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+	if (mct_int_type == MCT_INT_SPI)
+		if (cpu == 0)
+			remove_irq(evt->irq, &mct_tick0_event_irq);
+		else
+			remove_irq(evt->irq, &mct_tick1_event_irq);
+	else
+		disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
+}
+
+static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
+	.setup	= exynos4_local_timer_setup,
+	.stop	= exynos4_local_timer_stop,
+};
+#endif /* CONFIG_LOCAL_TIMERS */
+
+static void __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
+{
+	struct clk *mct_clk, *tick_clk;
+
+	tick_clk = np ? of_clk_get_by_name(np, "fin_pll") :
+				clk_get(NULL, "fin_pll");
+	if (IS_ERR(tick_clk))
+		panic("%s: unable to determine tick clock rate\n", __func__);
+	clk_rate = clk_get_rate(tick_clk);
+
+	mct_clk = np ? of_clk_get_by_name(np, "mct") : clk_get(NULL, "mct");
+	if (IS_ERR(mct_clk))
+		panic("%s: unable to retrieve mct clock instance\n", __func__);
+	clk_prepare_enable(mct_clk);
+
+	reg_base = base;
+	if (!reg_base)
+		panic("%s: unable to ioremap mct address space\n", __func__);
+
+#ifdef CONFIG_LOCAL_TIMERS
+	if (mct_int_type == MCT_INT_PPI) {
+		int err;
+
+		err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
+					 exynos4_mct_tick_isr, "MCT",
+					 &percpu_mct_tick);
+		WARN(err, "MCT: can't request IRQ %d (%d)\n",
+		     mct_irqs[MCT_L0_IRQ], err);
+	}
+
+	local_timer_register(&exynos4_mct_tick_ops);
+#endif /* CONFIG_LOCAL_TIMERS */
+}
+
+void __init mct_init(void)
+{
+	if (soc_is_exynos4210()) {
+		mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
+		mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0;
+		mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1;
+		mct_int_type = MCT_INT_SPI;
+	} else {
+		panic("unable to determine mct controller type\n");
+	}
+
+	exynos4_timer_resources(NULL, S5P_VA_SYSTIMER);
+	exynos4_clocksource_init();
+	exynos4_clockevent_init();
+}
+
+static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
+{
+	u32 nr_irqs, i;
+
+	mct_int_type = int_type;
+
+	/* This driver uses only one global timer interrupt */
+	mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
+
+	/*
+	 * Find out the number of local irqs specified. The local
+	 * timer irqs are specified after the four global timer
+	 * irqs are specified.
+	 */
+#ifdef CONFIG_OF
+	nr_irqs = of_irq_count(np);
+#else
+	nr_irqs = 0;
+#endif
+	for (i = MCT_L0_IRQ; i < nr_irqs; i++)
+		mct_irqs[i] = irq_of_parse_and_map(np, i);
+
+	exynos4_timer_resources(np, of_iomap(np, 0));
+	exynos4_clocksource_init();
+	exynos4_clockevent_init();
+}
+
+
+static void __init mct_init_spi(struct device_node *np)
+{
+	return mct_init_dt(np, MCT_INT_SPI);
+}
+
+static void __init mct_init_ppi(struct device_node *np)
+{
+	return mct_init_dt(np, MCT_INT_PPI);
+}
+CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
+CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 488c14cc8db..08d0c418c94 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -54,62 +54,100 @@ struct sh_cmt_priv {
 	struct clocksource cs;
 	unsigned long total_cycles;
 	bool cs_enabled;
+
+	/* callbacks for CMSTR and CMCSR access */
+	unsigned long (*read_control)(void __iomem *base, unsigned long offs);
+	void (*write_control)(void __iomem *base, unsigned long offs,
+			      unsigned long value);
+
+	/* callbacks for CMCNT and CMCOR access */
+	unsigned long (*read_count)(void __iomem *base, unsigned long offs);
+	void (*write_count)(void __iomem *base, unsigned long offs,
+			    unsigned long value);
 };
 
-static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
+/* Examples of supported CMT timer register layouts and I/O access widths:
+ *
+ * "16-bit counter and 16-bit control" as found on sh7263:
+ * CMSTR 0xfffec000 16-bit
+ * CMCSR 0xfffec002 16-bit
+ * CMCNT 0xfffec004 16-bit
+ * CMCOR 0xfffec006 16-bit
+ *
+ * "32-bit counter and 16-bit control" as found on sh7372, sh73a0, r8a7740:
+ * CMSTR 0xffca0000 16-bit
+ * CMCSR 0xffca0060 16-bit
+ * CMCNT 0xffca0064 32-bit
+ * CMCOR 0xffca0068 32-bit
+ */
+
+static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)
+{
+	return ioread16(base + (offs << 1));
+}
+
+static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs)
+{
+	return ioread32(base + (offs << 2));
+}
+
+static void sh_cmt_write16(void __iomem *base, unsigned long offs,
+			   unsigned long value)
+{
+	iowrite16(value, base + (offs << 1));
+}
+
+static void sh_cmt_write32(void __iomem *base, unsigned long offs,
+			   unsigned long value)
+{
+	iowrite32(value, base + (offs << 2));
+}
 
-#define CMSTR -1 /* shared register */
 #define CMCSR 0 /* channel register */
 #define CMCNT 1 /* channel register */
 #define CMCOR 2 /* channel register */
 
-static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr)
+static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p)
 {
 	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
-	void __iomem *base = p->mapbase;
-	unsigned long offs;
-
-	if (reg_nr == CMSTR) {
-		offs = 0;
-		base -= cfg->channel_offset;
-	} else
-		offs = reg_nr;
-
-	if (p->width == 16)
-		offs <<= 1;
-	else {
-		offs <<= 2;
-		if ((reg_nr == CMCNT) || (reg_nr == CMCOR))
-			return ioread32(base + offs);
-	}
 
-	return ioread16(base + offs);
+	return p->read_control(p->mapbase - cfg->channel_offset, 0);
 }
 
-static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr,
-				unsigned long value)
+static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p)
+{
+	return p->read_control(p->mapbase, CMCSR);
+}
+
+static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p)
+{
+	return p->read_count(p->mapbase, CMCNT);
+}
+
+static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p,
+				      unsigned long value)
 {
 	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
-	void __iomem *base = p->mapbase;
-	unsigned long offs;
-
-	if (reg_nr == CMSTR) {
-		offs = 0;
-		base -= cfg->channel_offset;
-	} else
-		offs = reg_nr;
-
-	if (p->width == 16)
-		offs <<= 1;
-	else {
-		offs <<= 2;
-		if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) {
-			iowrite32(value, base + offs);
-			return;
-		}
-	}
 
-	iowrite16(value, base + offs);
+	p->write_control(p->mapbase - cfg->channel_offset, 0, value);
+}
+
+static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p,
+				      unsigned long value)
+{
+	p->write_control(p->mapbase, CMCSR, value);
+}
+
+static inline void sh_cmt_write_cmcnt(struct sh_cmt_priv *p,
+				      unsigned long value)
+{
+	p->write_count(p->mapbase, CMCNT, value);
+}
+
+static inline void sh_cmt_write_cmcor(struct sh_cmt_priv *p,
+				      unsigned long value)
+{
+	p->write_count(p->mapbase, CMCOR, value);
 }
 
 static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p,
@@ -118,15 +156,15 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p,
 	unsigned long v1, v2, v3;
 	int o1, o2;
 
-	o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+	o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit;
 
 	/* Make sure the timer value is stable. Stolen from acpi_pm.c */
 	do {
 		o2 = o1;
-		v1 = sh_cmt_read(p, CMCNT);
-		v2 = sh_cmt_read(p, CMCNT);
-		v3 = sh_cmt_read(p, CMCNT);
-		o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+		v1 = sh_cmt_read_cmcnt(p);
+		v2 = sh_cmt_read_cmcnt(p);
+		v3 = sh_cmt_read_cmcnt(p);
+		o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit;
 	} while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
 			  || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
 
@@ -134,6 +172,7 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p,
 	return v2;
 }
 
+static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
 
 static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
 {
@@ -142,14 +181,14 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
 
 	/* start stop register shared by multiple timer channels */
 	raw_spin_lock_irqsave(&sh_cmt_lock, flags);
-	value = sh_cmt_read(p, CMSTR);
+	value = sh_cmt_read_cmstr(p);
 
 	if (start)
 		value |= 1 << cfg->timer_bit;
 	else
 		value &= ~(1 << cfg->timer_bit);
 
-	sh_cmt_write(p, CMSTR, value);
+	sh_cmt_write_cmstr(p, value);
 	raw_spin_unlock_irqrestore(&sh_cmt_lock, flags);
 }
 
@@ -173,14 +212,14 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
 	/* configure channel, periodic mode and maximum timeout */
 	if (p->width == 16) {
 		*rate = clk_get_rate(p->clk) / 512;
-		sh_cmt_write(p, CMCSR, 0x43);
+		sh_cmt_write_cmcsr(p, 0x43);
 	} else {
 		*rate = clk_get_rate(p->clk) / 8;
-		sh_cmt_write(p, CMCSR, 0x01a4);
+		sh_cmt_write_cmcsr(p, 0x01a4);
 	}
 
-	sh_cmt_write(p, CMCOR, 0xffffffff);
-	sh_cmt_write(p, CMCNT, 0);
+	sh_cmt_write_cmcor(p, 0xffffffff);
+	sh_cmt_write_cmcnt(p, 0);
 
 	/*
 	 * According to the sh73a0 user's manual, as CMCNT can be operated
@@ -194,12 +233,12 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
 	 * take RCLKx2 at maximum.
 	 */
 	for (k = 0; k < 100; k++) {
-		if (!sh_cmt_read(p, CMCNT))
+		if (!sh_cmt_read_cmcnt(p))
 			break;
 		udelay(1);
 	}
 
-	if (sh_cmt_read(p, CMCNT)) {
+	if (sh_cmt_read_cmcnt(p)) {
 		dev_err(&p->pdev->dev, "cannot clear CMCNT\n");
 		ret = -ETIMEDOUT;
 		goto err1;
@@ -222,7 +261,7 @@ static void sh_cmt_disable(struct sh_cmt_priv *p)
 	sh_cmt_start_stop_ch(p, 0);
 
 	/* disable interrupts in CMT block */
-	sh_cmt_write(p, CMCSR, 0);
+	sh_cmt_write_cmcsr(p, 0);
 
 	/* stop clock */
 	clk_disable(p->clk);
@@ -270,7 +309,7 @@ static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p,
 		if (new_match > p->max_match_value)
 			new_match = p->max_match_value;
 
-		sh_cmt_write(p, CMCOR, new_match);
+		sh_cmt_write_cmcor(p, new_match);
 
 		now = sh_cmt_get_counter(p, &has_wrapped);
 		if (has_wrapped && (new_match > p->match_value)) {
@@ -346,7 +385,7 @@ static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
 	struct sh_cmt_priv *p = dev_id;
 
 	/* clear flags */
-	sh_cmt_write(p, CMCSR, sh_cmt_read(p, CMCSR) & p->clear_bits);
+	sh_cmt_write_cmcsr(p, sh_cmt_read_cmcsr(p) & p->clear_bits);
 
 	/* update clock source counter to begin with if enabled
 	 * the wrap flag should be cleared by the timer specific
@@ -625,14 +664,6 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name,
 			   unsigned long clockevent_rating,
 			   unsigned long clocksource_rating)
 {
-	if (p->width == (sizeof(p->max_match_value) * 8))
-		p->max_match_value = ~0;
-	else
-		p->max_match_value = (1 << p->width) - 1;
-
-	p->match_value = p->max_match_value;
-	raw_spin_lock_init(&p->lock);
-
 	if (clockevent_rating)
 		sh_cmt_register_clockevent(p, name, clockevent_rating);
 
@@ -657,8 +688,6 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 		goto err0;
 	}
 
-	platform_set_drvdata(pdev, p);
-
 	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
@@ -693,32 +722,51 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 		goto err1;
 	}
 
+	p->read_control = sh_cmt_read16;
+	p->write_control = sh_cmt_write16;
+
 	if (resource_size(res) == 6) {
 		p->width = 16;
+		p->read_count = sh_cmt_read16;
+		p->write_count = sh_cmt_write16;
 		p->overflow_bit = 0x80;
 		p->clear_bits = ~0x80;
 	} else {
 		p->width = 32;
+		p->read_count = sh_cmt_read32;
+		p->write_count = sh_cmt_write32;
 		p->overflow_bit = 0x8000;
 		p->clear_bits = ~0xc000;
 	}
 
+	if (p->width == (sizeof(p->max_match_value) * 8))
+		p->max_match_value = ~0;
+	else
+		p->max_match_value = (1 << p->width) - 1;
+
+	p->match_value = p->max_match_value;
+	raw_spin_lock_init(&p->lock);
+
 	ret = sh_cmt_register(p, (char *)dev_name(&p->pdev->dev),
 			      cfg->clockevent_rating,
 			      cfg->clocksource_rating);
 	if (ret) {
 		dev_err(&p->pdev->dev, "registration failed\n");
-		goto err1;
+		goto err2;
 	}
 	p->cs_enabled = false;
 
 	ret = setup_irq(irq, &p->irqaction);
 	if (ret) {
 		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		goto err1;
+		goto err2;
 	}
 
+	platform_set_drvdata(pdev, p);
+
 	return 0;
+err2:
+	clk_put(p->clk);
 
 err1:
 	iounmap(p->mapbase);
@@ -751,7 +799,6 @@ static int sh_cmt_probe(struct platform_device *pdev)
 	ret = sh_cmt_setup(p, pdev);
 	if (ret) {
 		kfree(p);
-		platform_set_drvdata(pdev, NULL);
 		pm_runtime_idle(&pdev->dev);
 		return ret;
 	}
@@ -791,7 +838,7 @@ static void __exit sh_cmt_exit(void)
 }
 
 early_platform_init("earlytimer", &sh_cmt_device_driver);
-module_init(sh_cmt_init);
+subsys_initcall(sh_cmt_init);
 module_exit(sh_cmt_exit);
 
 MODULE_AUTHOR("Magnus Damm");
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 83943e27cfa..4aac9ee0d0c 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -386,7 +386,7 @@ static void __exit sh_mtu2_exit(void)
 }
 
 early_platform_init("earlytimer", &sh_mtu2_device_driver);
-module_init(sh_mtu2_init);
+subsys_initcall(sh_mtu2_init);
 module_exit(sh_mtu2_exit);
 
 MODULE_AUTHOR("Magnus Damm");
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index b4502edce2a..78b8dae4962 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -549,7 +549,7 @@ static void __exit sh_tmu_exit(void)
 }
 
 early_platform_init("earlytimer", &sh_tmu_device_driver);
-module_init(sh_tmu_init);
+subsys_initcall(sh_tmu_init);
 module_exit(sh_tmu_exit);
 
 MODULE_AUTHOR("Magnus Damm");