aboutsummaryrefslogtreecommitdiff
path: root/drivers/dma
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@stericsson.com>2010-08-04 13:37:45 +0200
committerDan Williams <dan.j.williams@intel.com>2010-08-04 14:14:05 -0700
commit95e1400fa1317e566b316ff4af947bd5341332c8 (patch)
treea2bdcd9729209f75eca11bc5b49b1b681a66c150 /drivers/dma
parentc156d0a5b0c667999e06d0bb52e3d1376faec8bf (diff)
DMAENGINE: add runtime slave config to DMA40 v3
This extends the DMA engine driver for the DMA40 used in the U8500 platform with the generic runtime slave configuration interface. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/dma')
-rw-r--r--drivers/dma/ste_dma40.c141
1 files changed, 137 insertions, 4 deletions
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 21a759731ef..17e2600a00c 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -208,6 +208,9 @@ struct d40_chan {
struct d40_def_lcsp log_def;
struct d40_lcla_elem lcla;
struct d40_log_lli_full *lcpa;
+ /* Runtime reconfiguration */
+ dma_addr_t runtime_addr;
+ enum dma_data_direction runtime_direction;
};
/**
@@ -1886,9 +1889,16 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d,
d40d->lli_tx_len = 1;
if (direction == DMA_FROM_DEVICE)
- dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
+ if (d40c->runtime_addr)
+ dev_addr = d40c->runtime_addr;
+ else
+ dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
else if (direction == DMA_TO_DEVICE)
- dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
+ if (d40c->runtime_addr)
+ dev_addr = d40c->runtime_addr;
+ else
+ dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
+
else
return -EINVAL;
@@ -1931,9 +1941,15 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d,
if (direction == DMA_FROM_DEVICE) {
dst_dev_addr = 0;
- src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
+ if (d40c->runtime_addr)
+ src_dev_addr = d40c->runtime_addr;
+ else
+ src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
} else if (direction == DMA_TO_DEVICE) {
- dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
+ if (d40c->runtime_addr)
+ dst_dev_addr = d40c->runtime_addr;
+ else
+ dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
src_dev_addr = 0;
} else
return -EINVAL;
@@ -2070,6 +2086,117 @@ static void d40_issue_pending(struct dma_chan *chan)
spin_unlock_irqrestore(&d40c->lock, flags);
}
+/* Runtime reconfiguration extension */
+static void d40_set_runtime_config(struct dma_chan *chan,
+ struct dma_slave_config *config)
+{
+ struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
+ struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
+ enum dma_slave_buswidth config_addr_width;
+ dma_addr_t config_addr;
+ u32 config_maxburst;
+ enum stedma40_periph_data_width addr_width;
+ int psize;
+
+ if (config->direction == DMA_FROM_DEVICE) {
+ dma_addr_t dev_addr_rx =
+ d40c->base->plat_data->dev_rx[cfg->src_dev_type];
+
+ config_addr = config->src_addr;
+ if (dev_addr_rx)
+ dev_dbg(d40c->base->dev,
+ "channel has a pre-wired RX address %08x "
+ "overriding with %08x\n",
+ dev_addr_rx, config_addr);
+ if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
+ dev_dbg(d40c->base->dev,
+ "channel was not configured for peripheral "
+ "to memory transfer (%d) overriding\n",
+ cfg->dir);
+ cfg->dir = STEDMA40_PERIPH_TO_MEM;
+
+ config_addr_width = config->src_addr_width;
+ config_maxburst = config->src_maxburst;
+
+ } else if (config->direction == DMA_TO_DEVICE) {
+ dma_addr_t dev_addr_tx =
+ d40c->base->plat_data->dev_tx[cfg->dst_dev_type];
+
+ config_addr = config->dst_addr;
+ if (dev_addr_tx)
+ dev_dbg(d40c->base->dev,
+ "channel has a pre-wired TX address %08x "
+ "overriding with %08x\n",
+ dev_addr_tx, config_addr);
+ if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
+ dev_dbg(d40c->base->dev,
+ "channel was not configured for memory "
+ "to peripheral transfer (%d) overriding\n",
+ cfg->dir);
+ cfg->dir = STEDMA40_MEM_TO_PERIPH;
+
+ config_addr_width = config->dst_addr_width;
+ config_maxburst = config->dst_maxburst;
+
+ } else {
+ dev_err(d40c->base->dev,
+ "unrecognized channel direction %d\n",
+ config->direction);
+ return;
+ }
+
+ switch (config_addr_width) {
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ addr_width = STEDMA40_BYTE_WIDTH;
+ break;
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ addr_width = STEDMA40_HALFWORD_WIDTH;
+ break;
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ addr_width = STEDMA40_WORD_WIDTH;
+ break;
+ case DMA_SLAVE_BUSWIDTH_8_BYTES:
+ addr_width = STEDMA40_DOUBLEWORD_WIDTH;
+ break;
+ default:
+ dev_err(d40c->base->dev,
+ "illegal peripheral address width "
+ "requested (%d)\n",
+ config->src_addr_width);
+ return;
+ }
+
+ if (config_maxburst >= 16)
+ psize = STEDMA40_PSIZE_LOG_16;
+ else if (config_maxburst >= 8)
+ psize = STEDMA40_PSIZE_LOG_8;
+ else if (config_maxburst >= 4)
+ psize = STEDMA40_PSIZE_LOG_4;
+ else
+ psize = STEDMA40_PSIZE_LOG_1;
+
+ /* Set up all the endpoint configs */
+ cfg->src_info.data_width = addr_width;
+ cfg->src_info.psize = psize;
+ cfg->src_info.endianess = STEDMA40_LITTLE_ENDIAN;
+ cfg->src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
+ cfg->dst_info.data_width = addr_width;
+ cfg->dst_info.psize = psize;
+ cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN;
+ cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
+
+ /* These settings will take precedence later */
+ d40c->runtime_addr = config_addr;
+ d40c->runtime_direction = config->direction;
+ dev_dbg(d40c->base->dev,
+ "configured channel %s for %s, data width %d, "
+ "maxburst %d bytes, LE, no flow control\n",
+ dma_chan_name(chan),
+ (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
+ config_addr_width,
+ config_maxburst);
+}
+
static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg)
{
@@ -2092,6 +2219,12 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
return d40_pause(chan);
case DMA_RESUME:
return d40_resume(chan);
+ case DMA_SLAVE_CONFIG:
+ d40_set_runtime_config(chan,
+ (struct dma_slave_config *) arg);
+ return 0;
+ default:
+ break;
}
/* Other commands are unimplemented */