aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2013-04-02 23:27:45 -0700
committerOlof Johansson <olof@lixom.net>2013-04-02 23:27:51 -0700
commit16eaaee4d87b2255797f94341bd442f1f93afd1b (patch)
tree616bf06039612355da8d3fcf6408701a7bb897e9 /drivers/gpio
parent8bb9660418e05bb1845ac1a2428444d78e322cc7 (diff)
parent00ae962f8051bb143fa1c43c6a9c8274c3a9c593 (diff)
Merge tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards2
Third round of Renesas ARM SoC board updates for v3.10 Highlights: * Add Lager board support * Add ape6evm board support * Add Bock-W board support * Mackerel MMCIF/SDHI clean ups * Add ethernet support to kzm9g-reference This pull request is based on a merge of: git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux2-for-v3.10 git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-boards2-for-v3.10 The merge with renesas-pinmux2-for-v3.10 was made to provide run-time dependencies for the following changes: ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support * tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (307 commits) ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection ARM: shmobile: mackerel: add interrupt names for SDHI0 ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio ARM: shmobile: mackerel: remove OCR masks, where regulators are used ARM: shmobile: mackerel: SDHI resources do not have to be numbered ARM: shmobile: Initial r8a7790 Lager board support ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support ARM: shmobile: APE6EVM base support ARM: shmobile: kzm9g-reference: add ethernet support ARM: shmobile: add R-Car M1A Bock-W platform support sh-pfc: r8a73a4: Remove unused GPIO bias data ARM: shmobile: r8a73a4: Remove all GPIO enums sh-pfc: r8a73a4: Remove function GPIOs ARM: shmobile: r8a73a4: Remove IRQC function GPIOs ARM: shmobile: r8a73a4: Remove SCIF function GPIOs sh-pfc: r8a73a4: Remove IRQC function GPIOS sh-pfc: r8a73a4: Remove SCIF function GPIOS sh-pfc: r8a73a4: Add IRQC pin groups and functions sh-pfc: r8a73a4: Add SCIF pin groups and functions ... Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig6
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-pl061.c117
-rw-r--r--drivers/gpio/gpio-rcar.c396
-rw-r--r--drivers/gpio/gpiolib-of.c20
5 files changed, 485 insertions, 55 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 93aaadf99f2..d766e3cbef1 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -204,6 +204,12 @@ config GPIO_PXA
help
Say yes here to support the PXA GPIO device
+config GPIO_RCAR
+ tristate "Renesas R-Car GPIO"
+ depends on ARM
+ help
+ Say yes here to support GPIO on Renesas R-Car SoCs.
+
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 22e07bc9fcb..b41c74d4528 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
+obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index b820869ca93..06ed257c5d3 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -15,6 +15,7 @@
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/bitops.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
@@ -22,6 +23,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/pm.h>
#include <asm/mach/irq.h>
@@ -51,8 +53,7 @@ struct pl061_gpio {
spinlock_t lock;
void __iomem *base;
- int irq_base;
- struct irq_chip_generic *irq_gc;
+ struct irq_domain *domain;
struct gpio_chip gc;
#ifdef CONFIG_PM
@@ -60,6 +61,17 @@ struct pl061_gpio {
#endif
};
+static int pl061_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ /*
+ * Map back to global GPIO space and request muxing, the direction
+ * parameter does not matter for this controller.
+ */
+ int gpio = chip->base + offset;
+
+ return pinctrl_request_gpio(gpio);
+}
+
static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
{
struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
@@ -122,24 +134,20 @@ static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
- if (chip->irq_base <= 0)
- return -EINVAL;
-
- return chip->irq_base + offset;
+ return irq_create_mapping(chip->domain, offset);
}
static int pl061_irq_type(struct irq_data *d, unsigned trigger)
{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct pl061_gpio *chip = gc->private;
- int offset = d->irq - chip->irq_base;
+ struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
+ int offset = irqd_to_hwirq(d);
unsigned long flags;
u8 gpiois, gpioibe, gpioiev;
if (offset < 0 || offset >= PL061_GPIO_NR)
return -EINVAL;
- raw_spin_lock_irqsave(&gc->lock, flags);
+ spin_lock_irqsave(&chip->lock, flags);
gpioiev = readb(chip->base + GPIOIEV);
@@ -168,7 +176,7 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
writeb(gpioiev, chip->base + GPIOIEV);
- raw_spin_unlock_irqrestore(&gc->lock, flags);
+ spin_unlock_irqrestore(&chip->lock, flags);
return 0;
}
@@ -192,31 +200,61 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
chained_irq_exit(irqchip, desc);
}
-static void __init pl061_init_gc(struct pl061_gpio *chip, int irq_base)
+static void pl061_irq_mask(struct irq_data *d)
{
- struct irq_chip_type *ct;
+ struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
+ u8 mask = 1 << (irqd_to_hwirq(d) % PL061_GPIO_NR);
+ u8 gpioie;
+
+ spin_lock(&chip->lock);
+ gpioie = readb(chip->base + GPIOIE) & ~mask;
+ writeb(gpioie, chip->base + GPIOIE);
+ spin_unlock(&chip->lock);
+}
+
+static void pl061_irq_unmask(struct irq_data *d)
+{
+ struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
+ u8 mask = 1 << (irqd_to_hwirq(d) % PL061_GPIO_NR);
+ u8 gpioie;
+
+ spin_lock(&chip->lock);
+ gpioie = readb(chip->base + GPIOIE) | mask;
+ writeb(gpioie, chip->base + GPIOIE);
+ spin_unlock(&chip->lock);
+}
- chip->irq_gc = irq_alloc_generic_chip("gpio-pl061", 1, irq_base,
- chip->base, handle_simple_irq);
- chip->irq_gc->private = chip;
+static struct irq_chip pl061_irqchip = {
+ .name = "pl061 gpio",
+ .irq_mask = pl061_irq_mask,
+ .irq_unmask = pl061_irq_unmask,
+ .irq_set_type = pl061_irq_type,
+};
+
+static int pl061_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct pl061_gpio *chip = d->host_data;
- ct = chip->irq_gc->chip_types;
- ct->chip.irq_mask = irq_gc_mask_clr_bit;
- ct->chip.irq_unmask = irq_gc_mask_set_bit;
- ct->chip.irq_set_type = pl061_irq_type;
- ct->chip.irq_set_wake = irq_gc_set_wake;
- ct->regs.mask = GPIOIE;
+ irq_set_chip_and_handler_name(virq, &pl061_irqchip, handle_simple_irq,
+ "pl061");
+ irq_set_chip_data(virq, chip);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
- irq_setup_generic_chip(chip->irq_gc, IRQ_MSK(PL061_GPIO_NR),
- IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0);
+ return 0;
}
+static const struct irq_domain_ops pl061_domain_ops = {
+ .map = pl061_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
{
struct device *dev = &adev->dev;
struct pl061_platform_data *pdata = dev->platform_data;
struct pl061_gpio *chip;
- int ret, irq, i;
+ int ret, irq, i, irq_base;
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
@@ -224,24 +262,31 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
if (pdata) {
chip->gc.base = pdata->gpio_base;
- chip->irq_base = pdata->irq_base;
- } else if (adev->dev.of_node) {
+ irq_base = pdata->irq_base;
+ if (irq_base <= 0)
+ return -ENODEV;
+ } else {
chip->gc.base = -1;
- chip->irq_base = 0;
- } else
- return -ENODEV;
+ irq_base = 0;
+ }
if (!devm_request_mem_region(dev, adev->res.start,
- resource_size(&adev->res), "pl061"))
+ resource_size(&adev->res), "pl061"))
return -EBUSY;
chip->base = devm_ioremap(dev, adev->res.start,
- resource_size(&adev->res));
- if (chip->base == NULL)
+ resource_size(&adev->res));
+ if (!chip->base)
return -ENOMEM;
+ chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR,
+ irq_base, &pl061_domain_ops, chip);
+ if (!chip->domain)
+ return -ENODEV;
+
spin_lock_init(&chip->lock);
+ chip->gc.request = pl061_gpio_request;
chip->gc.direction_input = pl061_direction_input;
chip->gc.direction_output = pl061_direction_output;
chip->gc.get = pl061_get_value;
@@ -259,12 +304,6 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
/*
* irq_chip support
*/
-
- if (chip->irq_base <= 0)
- return 0;
-
- pl061_init_gc(chip, chip->irq_base);
-
writeb(0, chip->base + GPIOIE); /* disable irqs */
irq = adev->irq[0];
if (irq < 0)
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
new file mode 100644
index 00000000000..b4ca450947b
--- /dev/null
+++ b/drivers/gpio/gpio-rcar.c
@@ -0,0 +1,396 @@
+/*
+ * Renesas R-Car GPIO Support
+ *
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+
+struct gpio_rcar_priv {
+ void __iomem *base;
+ spinlock_t lock;
+ struct gpio_rcar_config config;
+ struct platform_device *pdev;
+ struct gpio_chip gpio_chip;
+ struct irq_chip irq_chip;
+ struct irq_domain *irq_domain;
+};
+
+#define IOINTSEL 0x00
+#define INOUTSEL 0x04
+#define OUTDT 0x08
+#define INDT 0x0c
+#define INTDT 0x10
+#define INTCLR 0x14
+#define INTMSK 0x18
+#define MSKCLR 0x1c
+#define POSNEG 0x20
+#define EDGLEVEL 0x24
+#define FILONOFF 0x28
+
+static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
+{
+ return ioread32(p->base + offs);
+}
+
+static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
+ u32 value)
+{
+ iowrite32(value, p->base + offs);
+}
+
+static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
+ int bit, bool value)
+{
+ u32 tmp = gpio_rcar_read(p, offs);
+
+ if (value)
+ tmp |= BIT(bit);
+ else
+ tmp &= ~BIT(bit);
+
+ gpio_rcar_write(p, offs, tmp);
+}
+
+static void gpio_rcar_irq_disable(struct irq_data *d)
+{
+ struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
+
+ gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
+}
+
+static void gpio_rcar_irq_enable(struct irq_data *d)
+{
+ struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
+
+ gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
+}
+
+static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
+ unsigned int hwirq,
+ bool active_high_rising_edge,
+ bool level_trigger)
+{
+ unsigned long flags;
+
+ /* follow steps in the GPIO documentation for
+ * "Setting Edge-Sensitive Interrupt Input Mode" and
+ * "Setting Level-Sensitive Interrupt Input Mode"
+ */
+
+ spin_lock_irqsave(&p->lock, flags);
+
+ /* Configure postive or negative logic in POSNEG */
+ gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
+
+ /* Configure edge or level trigger in EDGLEVEL */
+ gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
+
+ /* Select "Interrupt Input Mode" in IOINTSEL */
+ gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
+
+ /* Write INTCLR in case of edge trigger */
+ if (!level_trigger)
+ gpio_rcar_write(p, INTCLR, BIT(hwirq));
+
+ spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
+ unsigned int hwirq = irqd_to_hwirq(d);
+
+ dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type);
+
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true);
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
+{
+ struct gpio_rcar_priv *p = dev_id;
+ u32 pending;
+ unsigned int offset, irqs_handled = 0;
+
+ while ((pending = gpio_rcar_read(p, INTDT))) {
+ offset = __ffs(pending);
+ gpio_rcar_write(p, INTCLR, BIT(offset));
+ generic_handle_irq(irq_find_mapping(p->irq_domain, offset));
+ irqs_handled++;
+ }
+
+ return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static inline struct gpio_rcar_priv *gpio_to_priv(struct gpio_chip *chip)
+{
+ return container_of(chip, struct gpio_rcar_priv, gpio_chip);
+}
+
+static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
+ unsigned int gpio,
+ bool output)
+{
+ struct gpio_rcar_priv *p = gpio_to_priv(chip);
+ unsigned long flags;
+
+ /* follow steps in the GPIO documentation for
+ * "Setting General Output Mode" and
+ * "Setting General Input Mode"
+ */
+
+ spin_lock_irqsave(&p->lock, flags);
+
+ /* Configure postive logic in POSNEG */
+ gpio_rcar_modify_bit(p, POSNEG, gpio, false);
+
+ /* Select "General Input/Output Mode" in IOINTSEL */
+ gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
+
+ /* Select Input Mode or Output Mode in INOUTSEL */
+ gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
+
+ spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(chip->base + offset);
+}
+
+static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(chip->base + offset);
+
+ /* Set the GPIO as an input to ensure that the next GPIO request won't
+ * drive the GPIO pin as an output.
+ */
+ gpio_rcar_config_general_input_output_mode(chip, offset, false);
+}
+
+static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ gpio_rcar_config_general_input_output_mode(chip, offset, false);
+ return 0;
+}
+
+static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
+{
+ return (int)(gpio_rcar_read(gpio_to_priv(chip), INDT) & BIT(offset));
+}
+
+static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct gpio_rcar_priv *p = gpio_to_priv(chip);
+ unsigned long flags;
+
+ spin_lock_irqsave(&p->lock, flags);
+ gpio_rcar_modify_bit(p, OUTDT, offset, value);
+ spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ /* write GPIO value to output before selecting output mode of pin */
+ gpio_rcar_set(chip, offset, value);
+ gpio_rcar_config_general_input_output_mode(chip, offset, true);
+ return 0;
+}
+
+static int gpio_rcar_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
+}
+
+static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct gpio_rcar_priv *p = h->host_data;
+
+ dev_dbg(&p->pdev->dev, "map hw irq = %d, virq = %d\n", (int)hw, virq);
+
+ irq_set_chip_data(virq, h->host_data);
+ irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID); /* kill me now */
+ return 0;
+}
+
+static struct irq_domain_ops gpio_rcar_irq_domain_ops = {
+ .map = gpio_rcar_irq_domain_map,
+};
+
+static int gpio_rcar_probe(struct platform_device *pdev)
+{
+ struct gpio_rcar_config *pdata = pdev->dev.platform_data;
+ struct gpio_rcar_priv *p;
+ struct resource *io, *irq;
+ struct gpio_chip *gpio_chip;
+ struct irq_chip *irq_chip;
+ const char *name = dev_name(&pdev->dev);
+ int ret;
+
+ p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ /* deal with driver instance configuration */
+ if (pdata)
+ p->config = *pdata;
+
+ p->pdev = pdev;
+ platform_set_drvdata(pdev, p);
+ spin_lock_init(&p->lock);
+
+ io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (!io || !irq) {
+ dev_err(&pdev->dev, "missing IRQ or IOMEM\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+
+ p->base = devm_ioremap_nocache(&pdev->dev, io->start,
+ resource_size(io));
+ if (!p->base) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ ret = -ENXIO;
+ goto err0;
+ }
+
+ gpio_chip = &p->gpio_chip;
+ gpio_chip->request = gpio_rcar_request;
+ gpio_chip->free = gpio_rcar_free;
+ gpio_chip->direction_input = gpio_rcar_direction_input;
+ gpio_chip->get = gpio_rcar_get;
+ gpio_chip->direction_output = gpio_rcar_direction_output;
+ gpio_chip->set = gpio_rcar_set;
+ gpio_chip->to_irq = gpio_rcar_to_irq;
+ gpio_chip->label = name;
+ gpio_chip->owner = THIS_MODULE;
+ gpio_chip->base = p->config.gpio_base;
+ gpio_chip->ngpio = p->config.number_of_pins;
+
+ irq_chip = &p->irq_chip;
+ irq_chip->name = name;
+ irq_chip->irq_mask = gpio_rcar_irq_disable;
+ irq_chip->irq_unmask = gpio_rcar_irq_enable;
+ irq_chip->irq_enable = gpio_rcar_irq_enable;
+ irq_chip->irq_disable = gpio_rcar_irq_disable;
+ irq_chip->irq_set_type = gpio_rcar_irq_set_type;
+ irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED;
+
+ p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
+ p->config.number_of_pins,
+ p->config.irq_base,
+ &gpio_rcar_irq_domain_ops, p);
+ if (!p->irq_domain) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "cannot initialize irq domain\n");
+ goto err1;
+ }
+
+ if (devm_request_irq(&pdev->dev, irq->start,
+ gpio_rcar_irq_handler, 0, name, p)) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ ret = -ENOENT;
+ goto err1;
+ }
+
+ ret = gpiochip_add(gpio_chip);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add GPIO controller\n");
+ goto err1;
+ }
+
+ dev_info(&pdev->dev, "driving %d GPIOs\n", p->config.number_of_pins);
+
+ /* warn in case of mismatch if irq base is specified */
+ if (p->config.irq_base) {
+ ret = irq_find_mapping(p->irq_domain, 0);
+ if (p->config.irq_base != ret)
+ dev_warn(&pdev->dev, "irq base mismatch (%u/%u)\n",
+ p->config.irq_base, ret);
+ }
+
+ ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0,
+ gpio_chip->base, gpio_chip->ngpio);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "failed to add pin range\n");
+
+ return 0;
+
+err1:
+ irq_domain_remove(p->irq_domain);
+err0:
+ return ret;
+}
+
+static int gpio_rcar_remove(struct platform_device *pdev)
+{
+ struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&p->gpio_chip);
+ if (ret)
+ return ret;
+
+ irq_domain_remove(p->irq_domain);
+ return 0;
+}
+
+static struct platform_driver gpio_rcar_device_driver = {
+ .probe = gpio_rcar_probe,
+ .remove = gpio_rcar_remove,
+ .driver = {
+ .name = "gpio_rcar",
+ }
+};
+
+module_platform_driver(gpio_rcar_device_driver);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index a71a54a3e3f..465f4ca57e8 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -193,7 +193,7 @@ static void of_gpiochip_add_pin_range(struct gpio_chip *chip)
if (!np)
return;
- do {
+ for (;; index++) {
ret = of_parse_phandle_with_args(np, "gpio-ranges",
"#gpio-range-cells", index, &pinspec);
if (ret)
@@ -203,27 +203,15 @@ static void of_gpiochip_add_pin_range(struct gpio_chip *chip)
if (!pctldev)
break;
- /*
- * This assumes that the n GPIO pins are consecutive in the
- * GPIO number space, and that the pins are also consecutive
- * in their local number space. Currently it is not possible
- * to add different ranges for one and the same GPIO chip,
- * as the code assumes that we have one consecutive range
- * on both, mapping 1-to-1.
- *
- * TODO: make the OF bindings handle multiple sparse ranges
- * on the same GPIO chip.
- */
ret = gpiochip_add_pin_range(chip,
pinctrl_dev_get_devname(pctldev),
- 0, /* offset in gpiochip */
pinspec.args[0],
- pinspec.args[1]);
+ pinspec.args[1],
+ pinspec.args[2]);
if (ret)
break;
-
- } while (index++);
+ }
}
#else