cdv: continue synching up with updated reference code

In particular clean up the errata handling and correct the crtc masks. We do
this a bit differently using our device abstraction for neatness.

This doesn't address the ACPI opregion and hotplug plumbing, nor the IRQ related
changes that will need. It touches on backlight init but the full backlight
support is not in this change set.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

10 files changed, 89 insertions, 56 deletions

diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
index a54cc738926..5cc06a8fcb7 100644
--- a/drivers/gpu/drm/gma500/cdv_device.c
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -49,6 +49,9 @@ static void cdv_disable_vga(struct drm_device *dev)
 static int cdv_output_init(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	drm_mode_create_scaling_mode_property(dev);
+
 	cdv_disable_vga(dev);
 
 	cdv_intel_crt_init(dev, &dev_priv->mode_dev);
@@ -238,6 +241,18 @@ static void cdv_init_pm(struct drm_device *dev)
 	dev_err(dev->dev, "GPU: power management timed out.\n");
 }
 
+static void cdv_errata(struct drm_device *dev)
+{
+	/* Disable bonus launch.
+	 *	CPU and GPU competes for memory and display misses updates and flickers.
+	 *	Worst with dual core, dual displays.
+	 *
+	 *	Fixes were done to Win 7 gfx driver to disable a feature called Bonus
+	 *	Launch to work around the issue, by degrading performance.
+	 */
+	 CDV_MSG_WRITE32(3, 0x30, 0x08027108);
+}
+
 /**
  *	cdv_save_display_registers	-	save registers lost on suspend
  *	@dev: our DRM device
@@ -355,7 +370,7 @@ static int cdv_restore_display_registers(struct drm_device *dev)
 	REG_WRITE(PSB_INT_MASK_R, regs->cdv.saveIMR);
 
 	/* Fix arbitration bug */
-	CDV_MSG_WRITE32(3, 0x30, 0x08027108);
+	cdv_errata(dev);
 
 	drm_mode_config_reset(dev);
 
@@ -464,8 +479,11 @@ const struct psb_ops cdv_chip_ops = {
 	.accel_2d = 0,
 	.pipes = 2,
 	.crtcs = 2,
+	.hdmi_mask = (1 << 0) | (1 << 1),
+	.lvds_mask = (1 << 1),
 	.sgx_offset = MRST_SGX_OFFSET,
 	.chip_setup = cdv_chip_setup,
+	.errata = cdv_errata,
 
 	.crtc_helper = &cdv_intel_helper_funcs,
 	.crtc_funcs = &cdv_intel_crtc_funcs,
diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
index 1a82843b157..18742201860 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_crt.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
@@ -78,9 +78,6 @@ static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
 	if (mode->clock > 355000)
 		return MODE_CLOCK_HIGH;
 
-	if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
-		return MODE_PANEL;
-
 	return MODE_OK;
 }
 
@@ -148,13 +145,7 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
 	struct drm_device *dev = connector->dev;
 	u32 hotplug_en;
 	int i, tries = 0, ret = false;
-	u32 adpa_orig;
-
-	/* disable the DAC when doing the hotplug detection */
-
-	adpa_orig = REG_READ(ADPA);
-
-	REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
+	u32 orig;
 
 	/*
 	 * On a CDV thep, CRT detect sequence need to be done twice
@@ -162,7 +153,7 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
 	 */
 	tries = 2;
 
-	hotplug_en = REG_READ(PORT_HOTPLUG_EN);
+	orig = hotplug_en = REG_READ(PORT_HOTPLUG_EN);
 	hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
@@ -187,8 +178,11 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
 	    CRT_HOTPLUG_MONITOR_NONE)
 		ret = true;
 
-	/* Restore the saved ADPA */
-	REG_WRITE(ADPA, adpa_orig);
+	 /* clear the interrupt we just generated, if any */
+	REG_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
+
+	/* and put the bits back */
+	REG_WRITE(PORT_HOTPLUG_EN, orig);
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
index 07b37f570ad..2fab7785497 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_display.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -226,13 +226,13 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
 	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
 	int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB;
 	u32 ref_value;
+	u32 lane_reg, lane_value;
 
 	cdv_sb_reset(dev);
 
-	if ((REG_READ(dpll_reg) & DPLL_SYNCLOCK_ENABLE) == 0) {
-		DRM_ERROR("Attempting to set DPLL with refclk disabled\n");
-		return -EBUSY;
-	}
+	REG_WRITE(dpll_reg, DPLL_SYNCLOCK_ENABLE | DPLL_VGA_MODE_DIS);
+
+	udelay(100);
 
 	/* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
 	ref_value = 0x68A701;
@@ -337,36 +337,29 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
 	if (ret)
 		return ret;
 
-	/* always Program the Lane Register for the Pipe A*/
-/* 	if (pipe == 0) */ {
-		/* Program the Lane0/1 for HDMI B */
-		u32 lane_reg, lane_value;
-
-		lane_reg = PSB_LANE0;
-		cdv_sb_read(dev, lane_reg, &lane_value);
-		lane_value &= ~(LANE_PLL_MASK);
-		lane_value |= LANE_PLL_ENABLE;
-		cdv_sb_write(dev, lane_reg, lane_value);
-
-		lane_reg = PSB_LANE1;
-		cdv_sb_read(dev, lane_reg, &lane_value);
-		lane_value &= ~(LANE_PLL_MASK);
-		lane_value |= LANE_PLL_ENABLE;
-		cdv_sb_write(dev, lane_reg, lane_value);
-
-		/* Program the Lane2/3 for HDMI C */
-		lane_reg = PSB_LANE2;
-		cdv_sb_read(dev, lane_reg, &lane_value);
-		lane_value &= ~(LANE_PLL_MASK);
-		lane_value |= LANE_PLL_ENABLE;
-		cdv_sb_write(dev, lane_reg, lane_value);
-
-		lane_reg = PSB_LANE3;
-		cdv_sb_read(dev, lane_reg, &lane_value);
-		lane_value &= ~(LANE_PLL_MASK);
-		lane_value |= LANE_PLL_ENABLE;
-		cdv_sb_write(dev, lane_reg, lane_value);
-	}
+	lane_reg = PSB_LANE0;
+	cdv_sb_read(dev, lane_reg, &lane_value);
+	lane_value &= ~(LANE_PLL_MASK);
+	lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+	cdv_sb_write(dev, lane_reg, lane_value);
+
+	lane_reg = PSB_LANE1;
+	cdv_sb_read(dev, lane_reg, &lane_value);
+	lane_value &= ~(LANE_PLL_MASK);
+	lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+	cdv_sb_write(dev, lane_reg, lane_value);
+
+	lane_reg = PSB_LANE2;
+	cdv_sb_read(dev, lane_reg, &lane_value);
+	lane_value &= ~(LANE_PLL_MASK);
+	lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+	cdv_sb_write(dev, lane_reg, lane_value);
+
+	lane_reg = PSB_LANE3;
+	cdv_sb_read(dev, lane_reg, &lane_value);
+	lane_value &= ~(LANE_PLL_MASK);
+	lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+	cdv_sb_write(dev, lane_reg, lane_value);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
index c87b179eadf..44a8353d92b 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -356,6 +356,8 @@ static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(
+							encoder->crtc);
 	u32 pfit_control;
 
 	/*
@@ -377,6 +379,8 @@ static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
 	else
 		pfit_control = 0;
 
+	pfit_control |= psb_intel_crtc->pipe << PFIT_PIPE_SHIFT;
+
 	if (dev_priv->lvds_dither)
 		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 
@@ -767,6 +771,19 @@ void cdv_intel_lvds_init(struct drm_device *dev,
 		goto failed_find;
 	}
 
+	/* setup PWM */
+	{
+		u32 pwm;
+
+		pwm = REG_READ(BLC_PWM_CTL2);
+		if (pipe == 1)
+			pwm |= PWM_PIPE_B;
+		else
+			pwm &= ~PWM_PIPE_B;
+		pwm |= PWM_ENABLE;
+		REG_WRITE(BLC_PWM_CTL2, pwm);
+	}
+
 out:
 	drm_sysfs_connector_add(connector);
 	return;
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index c2cf6bf217d..c9fe4bdeb68 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -748,10 +748,7 @@ static void psb_setup_outputs(struct drm_device *dev)
 			clone_mask = (1 << INTEL_OUTPUT_SDVO);
 			break;
 		case INTEL_OUTPUT_LVDS:
-			if (IS_MRST(dev))
-				crtc_mask = (1 << 0);
-			else
-				crtc_mask = (1 << 1);
+		        crtc_mask = dev_priv->ops->lvds_mask;
 			clone_mask = (1 << INTEL_OUTPUT_LVDS);
 			break;
 		case INTEL_OUTPUT_MIPI:
@@ -763,10 +760,7 @@ static void psb_setup_outputs(struct drm_device *dev)
 			clone_mask = (1 << INTEL_OUTPUT_MIPI2);
 			break;
 		case INTEL_OUTPUT_HDMI:
-			if (IS_MFLD(dev))
-				crtc_mask = (1 << 1);
-			else	
-				crtc_mask = (1 << 0);
+		        crtc_mask = dev_priv->ops->hdmi_mask;
 			clone_mask = (1 << INTEL_OUTPUT_HDMI);
 			break;
 		}
@@ -802,6 +796,9 @@ void psb_modeset_init(struct drm_device *dev)
 	dev->mode_config.max_height = 2048;
 
 	psb_setup_outputs(dev);
+
+	if (dev_priv->ops->errata)
+	        dev_priv->ops->errata(dev);
 }
 
 void psb_modeset_cleanup(struct drm_device *dev)
diff --git a/drivers/gpu/drm/gma500/mdfld_device.c b/drivers/gpu/drm/gma500/mdfld_device.c
index af656787db0..a0bd48cd92f 100644
--- a/drivers/gpu/drm/gma500/mdfld_device.c
+++ b/drivers/gpu/drm/gma500/mdfld_device.c
@@ -672,6 +672,8 @@ const struct psb_ops mdfld_chip_ops = {
 	.accel_2d = 0,
 	.pipes = 3,
 	.crtcs = 3,
+	.lvds_mask = (1 << 1);
+	.hdmi_mask = (1 << 1);
 	.sgx_offset = MRST_SGX_OFFSET,
 
 	.chip_setup = mid_chip_setup,
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 41d1924ea31..4c5a1864adf 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -487,6 +487,8 @@ const struct psb_ops oaktrail_chip_ops = {
 	.accel_2d = 1,
 	.pipes = 2,
 	.crtcs = 2,
+	.hdmi_mask = (1 << 0),
+	.lvds_mask = (1 << 0),
 	.sgx_offset = MRST_SGX_OFFSET,
 
 	.chip_setup = oaktrail_chip_setup,
diff --git a/drivers/gpu/drm/gma500/psb_device.c b/drivers/gpu/drm/gma500/psb_device.c
index 95d163e4f1f..34e6866a73b 100644
--- a/drivers/gpu/drm/gma500/psb_device.c
+++ b/drivers/gpu/drm/gma500/psb_device.c
@@ -308,6 +308,8 @@ const struct psb_ops psb_chip_ops = {
 	.accel_2d = 1,
 	.pipes = 2,
 	.crtcs = 2,
+	.hdmi_mask = (1 << 0),
+	.lvds_mask = (1 << 1),
 	.sgx_offset = PSB_SGX_OFFSET,
 	.chip_setup = psb_chip_setup,
 	.chip_teardown = psb_chip_teardown,
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index 64de248558b..6235499f39b 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -688,6 +688,8 @@ struct psb_ops {
 	int pipes;		/* Number of output pipes */
 	int crtcs;		/* Number of CRTCs */
 	int sgx_offset;		/* Base offset of SGX device */
+	int hdmi_mask;		/* Mask of HDMI CRTCs */
+	int lvds_mask;		/* Mask of LVDS CRTCs */
 
 	/* Sub functions */
 	struct drm_crtc_helper_funcs const *crtc_helper;
@@ -696,6 +698,8 @@ struct psb_ops {
 	/* Setup hooks */
 	int (*chip_setup)(struct drm_device *dev);
 	void (*chip_teardown)(struct drm_device *dev);
+	/* Optional helper caller after modeset */
+	void (*errata)(struct drm_device *dev);
 
 	/* Display management hooks */
 	int (*output_init)(struct drm_device *dev);
diff --git a/drivers/gpu/drm/gma500/psb_intel_reg.h b/drivers/gpu/drm/gma500/psb_intel_reg.h
index 46792fc7d0d..cbd8aee2b7e 100644
--- a/drivers/gpu/drm/gma500/psb_intel_reg.h
+++ b/drivers/gpu/drm/gma500/psb_intel_reg.h
@@ -91,6 +91,9 @@
 
 #define BLC_PWM_CTL		0x61254
 #define BLC_PWM_CTL2		0x61250
+#define  PWM_ENABLE		(1 << 31)
+#define  PWM_LEGACY_MODE	(1 << 30)
+#define  PWM_PIPE_B		(1 << 29)
 #define BLC_PWM_CTL_C		0x62254
 #define BLC_PWM_CTL2_C		0x62250
 #define BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
@@ -1338,6 +1341,7 @@ No status bits are changed.
 
 #define LANE_PLL_MASK		(0x7 << 20)
 #define LANE_PLL_ENABLE		(0x3 << 20)
+#define LANE_PLL_PIPE(p)	(((p) == 0) ? (1 << 21) : (0 << 21))
 
 
 #endif