Merge branch 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next

Alex writes:
Pretty minor -next pull request.  We some additional new bits waiting
internally for release.  Hopefully Monday we can get at least some of
them out.  The others will probably take a few more weeks.

Highlights of the current request:
- ELD registers for passing audio information to the sound hardware
- Handle GPUVM page faults more gracefully
- Misc fixes

Merge radeon test
* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux: (483 commits)
  drm/radeon: bump driver version for new info ioctl requests
  drm/radeon: fix eDP clk and lane setup for scaled modes
  drm/radeon: add new INFO ioctl requests
  drm/radeon/dce32+: use fractional fb dividers for high clocks
  drm/radeon: use cached memory when evicting for vram on non agp
  drm/radeon: add a CS flag END_OF_FRAME
  drm/radeon: stop page faults from hanging the system (v2)
  drm/radeon/dce4/5: add registers for ELD handling
  drm/radeon/dce3.2: add registers for ELD handling
  radeon: fix pll/ctrc mapping on dce2 and dce3 hardware
  Linux 3.7-rc7
  powerpc/eeh: Do not invalidate PE properly
  Revert "drm/i915: enable rc6 on ilk again"
  ALSA: hda - Fix build without CONFIG_PM
  of/address: sparc: Declare of_iomap as an extern function for sparc again
  PM / QoS: fix wrong error-checking condition
  bnx2x: remove redundant warning log
  vxlan: fix command usage in its doc
  8139cp: revert "set ring address before enabling receiver"
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  ...

Conflicts:
	drivers/gpu/drm/exynos/exynos_drm_encoder.c
	drivers/gpu/drm/exynos/exynos_drm_fbdev.c
	drivers/gpu/drm/nouveau/core/engine/disp/nv50.c

1 files changed, 29 insertions, 10 deletions

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index a4bee83df74..4b07401540e 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2244,7 +2244,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
 		intel_sdvo->is_hdmi = true;
 	}
-	intel_sdvo->base.cloneable = true;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 	if (intel_sdvo->is_hdmi)
@@ -2275,7 +2274,6 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
 
 	intel_sdvo->is_tv = true;
 	intel_sdvo->base.needs_tv_clock = true;
-	intel_sdvo->base.cloneable = false;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 
@@ -2318,8 +2316,6 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
 		intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1;
 	}
 
-	intel_sdvo->base.cloneable = true;
-
 	intel_sdvo_connector_init(intel_sdvo_connector,
 				  intel_sdvo);
 	return true;
@@ -2350,9 +2346,6 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
 		intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
 	}
 
-	/* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */
-	intel_sdvo->base.cloneable = false;
-
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 	if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
 		goto err;
@@ -2425,6 +2418,18 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags)
 	return true;
 }
 
+static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	struct drm_connector *connector, *tmp;
+
+	list_for_each_entry_safe(connector, tmp,
+				 &dev->mode_config.connector_list, head) {
+		if (intel_attached_encoder(connector) == &intel_sdvo->base)
+			intel_sdvo_destroy(connector);
+	}
+}
+
 static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
 					  struct intel_sdvo_connector *intel_sdvo_connector,
 					  int type)
@@ -2746,9 +2751,20 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
 			      SDVO_NAME(intel_sdvo));
-		goto err;
+		/* Output_setup can leave behind connectors! */
+		goto err_output;
 	}
 
+	/*
+	 * Cloning SDVO with anything is often impossible, since the SDVO
+	 * encoder can request a special input timing mode. And even if that's
+	 * not the case we have evidence that cloning a plain unscaled mode with
+	 * VGA doesn't really work. Furthermore the cloning flags are way too
+	 * simplistic anyway to express such constraints, so just give up on
+	 * cloning for SDVO encoders.
+	 */
+	intel_sdvo->base.cloneable = false;
+
 	/* Only enable the hotplug irq if we need it, to work around noisy
 	 * hotplug lines.
 	 */
@@ -2759,12 +2775,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 
 	/* Set the input timing to the screen. Assume always input 0. */
 	if (!intel_sdvo_set_target_input(intel_sdvo))
-		goto err;
+		goto err_output;
 
 	if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
 						    &intel_sdvo->pixel_clock_min,
 						    &intel_sdvo->pixel_clock_max))
-		goto err;
+		goto err_output;
 
 	DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
 			"clock range %dMHz - %dMHz, "
@@ -2784,6 +2800,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 			(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
 	return true;
 
+err_output:
+	intel_sdvo_output_cleanup(intel_sdvo);
+
 err:
 	drm_encoder_cleanup(&intel_encoder->base);
 	i2c_del_adapter(&intel_sdvo->ddc);