Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
Highlights of this -next round:
- ivb fdi B/C fixes
- hsw sprite/plane offset fixes from Damien
- unified dp/hdmi encoder for hsw, finally external dp support on hsw
  (Paulo)
- kill-agp and some other prep work in the gtt code from Ben
- some fb handling fixes from Ville
- massive pile of patches to align hsw VGA with the spec and make it
  actually work (Paulo)
- pile of workarounds from Jesse, mostly for vlv, but also some other
  related platforms
- start of a dev_priv reorg, that thing grew out of bounds and chaotic
- small bits&pieces all over the place, down to better error handling for
  load-detect on gen2 (Chris, Jani, Mika, Zhenyu, ...)

On top of the previous pile (just copypasta):
- tons of hsw dp prep patches form Paulo
- round scheduled work items and timers to nearest second (Chris)
- some hw workarounds (Jesse&Damien)
- vlv dp support and related fixups (Vijay et al.)
- basic haswell dp support, not yet wired up for external ports (Paulo)
- edp support (Paulo)
- tons of refactorings to prepare for the above (Paulo)
- panel rework, unifiying code between lvds and edp panels (Jani)
- panel fitter scaling modes (Jani + Yuly Novikov)
- panel power improvements, should now work without the BIOS setting it up
- extracting some dp helpers from radeon/i915 and move them to
  drm_dp_helper.c
- randome pile of workarounds (Damien, Ben, ...)
- some cleanups for the register restore code for suspend/resume
- secure batchbuffer support, should enable tear-free blits on gen6+
  Chris)
- random smaller fixlets and cleanups.

* 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel: (231 commits)
  drm/i915: Restore physical HWS_PGA after resume
  drm/i915: Report amount of usable graphics memory in MiB
  drm/i915/i2c: Track users of GMBUS force-bit
  drm/i915: Allocate the proper size for contexts.
  drm/i915: Update load-detect failure paths for modeset-rework
  drm/i915: Clear unused fields of mode for framebuffer creation
  drm/i915: Always calculate 8xx WM values based on a 32-bpp framebuffer
  drm/i915: Fix sparse warnings in from AGP kill code
  drm/i915: Missed lock change with rps lock
  drm/i915: Move the remaining gtt code
  drm/i915: flush system agent TLBs on SNB
  drm/i915: Kill off now unused gen6+ AGP code
  drm/i915: Calculate correct stolen size for GEN7+
  drm/i915: Stop using AGP layer for GEN6+
  drm/i915: drop the double-OP_STOREDW usage in blt_ring_flush
  drm/i915: don't rewrite the GTT on resume v4
  drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex
  drm/i915: put ring frequency and turbo setup into a work queue v5
  drm/i915: don't block resume on fb console resume v2
  drm/i915: extract l3_parity substruct from dev_priv
  ...

1 files changed, 20 insertions, 13 deletions

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 79d308da29f..aea64425b1a 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2072,17 +2072,24 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
 	else
 		mapping = &dev_priv->sdvo_mappings[1];
 
-	pin = GMBUS_PORT_DPB;
-	if (mapping->initialized)
+	if (mapping->initialized && intel_gmbus_is_port_valid(mapping->i2c_pin))
 		pin = mapping->i2c_pin;
+	else
+		pin = GMBUS_PORT_DPB;
 
-	if (intel_gmbus_is_port_valid(pin)) {
-		sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin);
-		intel_gmbus_set_speed(sdvo->i2c, GMBUS_RATE_1MHZ);
-		intel_gmbus_force_bit(sdvo->i2c, true);
-	} else {
-		sdvo->i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
-	}
+	sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin);
+
+	/* With gmbus we should be able to drive sdvo i2c at 2MHz, but somehow
+	 * our code totally fails once we start using gmbus. Hence fall back to
+	 * bit banging for now. */
+	intel_gmbus_force_bit(sdvo->i2c, true);
+}
+
+/* undo any changes intel_sdvo_select_i2c_bus() did to sdvo->i2c */
+static void
+intel_sdvo_unselect_i2c_bus(struct intel_sdvo *sdvo)
+{
+	intel_gmbus_force_bit(sdvo->i2c, false);
 }
 
 static bool
@@ -2658,10 +2665,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 	intel_sdvo->is_sdvob = is_sdvob;
 	intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, intel_sdvo) >> 1;
 	intel_sdvo_select_i2c_bus(dev_priv, intel_sdvo, sdvo_reg);
-	if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev)) {
-		kfree(intel_sdvo);
-		return false;
-	}
+	if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev))
+		goto err_i2c_bus;
 
 	/* encoder type will be decided later */
 	intel_encoder = &intel_sdvo->base;
@@ -2746,6 +2751,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 err:
 	drm_encoder_cleanup(&intel_encoder->base);
 	i2c_del_adapter(&intel_sdvo->ddc);
+err_i2c_bus:
+	intel_sdvo_unselect_i2c_bus(intel_sdvo);
 	kfree(intel_sdvo);
 
 	return false;