drm/i915: convert dpms functions of dvo/sdvo/crt

Yeah, big patch but I couldn't come up with a neat idea of how to
split it up further, that wouldn't break dpms on cloned configs
somehow. But the changes in dvo/sdvo/crt are all pretty much
orthonogal, so it's not too bad a patch.

These are the only encoders that support cloning, which requires a few
special changes compared to the previous patches.
- Compute the desired state of the display pipe by walking all
  connected encoders and checking whether any has active connectors.
  To make this clearer, drop the old mode parameter to the crtc dpms
  function and rename it to intel_crtc_update_dpms.
- There's the curious case of intel_crtc->dpms_mode. With the previous
  patches to remove the overlay pipe A code and to rework the load
  detect pipe code, the big users are gone. We still keep it to avoid
  enabling the pipe twice, but we duplicate this logic with
  crtc->active, too. Still, leave this for now and just push a fake
  dpms mode into it that reflects the state of the display pipe.

Changes in the encoder dpms functions:
- We clamp the dpms state to the supported range right away. This is
  escpecially important for the VGA outputs, where only older hw
  supports the intermediate states. This (and the crt->adpa_reg patch)
  allows us to unify the crt dpms code again between all variants
  (gmch, vlv and pch).
- We only enable/disable the output for dvo/sdvo and leave the encoder
  running. The encoder will be disabled/enabled when we switch the
  state of the entire output pipeline (which will happen right away
  for non-cloned setups). This way the duplication is reduced and
  strange interaction when disabling output ports at the wrong time
  avoided.

The dpms code for all three types of connectors contains a bit of
duplicated logic, but I think keeping these special cases separate is
simpler: CRT is the only one that hanldes intermediate dpms state
(which requires extra logic to enable/disable things in the right
order), and introducing some abstraction just to share the code
between dvo and sdvo smells like overkill. We can do that once someone
bothers to implement cloning for the more modern outputs. But I doubt
that this will ever happen.

v2: s/crtc/crt/_set_dpms, noticed by Paulo Zanoni.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 26 insertions, 34 deletions

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 20feaa34b06..a01c47021f5 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1192,51 +1192,44 @@ static void intel_enable_sdvo(struct intel_encoder *encoder)
 	intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
 }
 
-static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
+static void intel_sdvo_dpms(struct drm_connector *connector, int mode)
 {
-	struct drm_device *dev = encoder->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	u32 temp;
+	struct drm_crtc *crtc;
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+
+	/* dvo supports only 2 dpms states. */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	crtc = intel_sdvo->base.base.crtc;
+	if (!crtc) {
+		intel_sdvo->base.connectors_active = false;
+		return;
+	}
 
 	if (mode != DRM_MODE_DPMS_ON) {
 		intel_sdvo_set_active_outputs(intel_sdvo, 0);
 		if (0)
 			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
 
-		if (mode == DRM_MODE_DPMS_OFF) {
-			temp = I915_READ(intel_sdvo->sdvo_reg);
-			if ((temp & SDVO_ENABLE) != 0) {
-				intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
-			}
-		}
+		intel_sdvo->base.connectors_active = false;
+
+		intel_crtc_update_dpms(crtc);
 	} else {
-		bool input1, input2;
-		int i;
-		u8 status;
-
-		temp = I915_READ(intel_sdvo->sdvo_reg);
-		if ((temp & SDVO_ENABLE) == 0)
-			intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
-		for (i = 0; i < 2; i++)
-			intel_wait_for_vblank(dev, intel_crtc->pipe);
-
-		status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
-		/* Warn if the device reported failure to sync.
-		 * A lot of SDVO devices fail to notify of sync, but it's
-		 * a given it the status is a success, we succeeded.
-		 */
-		if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
-			DRM_DEBUG_KMS("First %s output reported failure to "
-					"sync\n", SDVO_NAME(intel_sdvo));
-		}
+		intel_sdvo->base.connectors_active = true;
+
+		intel_crtc_update_dpms(crtc);
 
 		if (0)
 			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
 		intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
 	}
-	return;
 }
 
 static int intel_sdvo_mode_valid(struct drm_connector *connector,
@@ -1895,7 +1888,6 @@ done:
 }
 
 static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
-	.dpms = intel_sdvo_dpms,
 	.mode_fixup = intel_sdvo_mode_fixup,
 	.prepare = intel_encoder_noop,
 	.mode_set = intel_sdvo_mode_set,
@@ -1904,7 +1896,7 @@ static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_sdvo_dpms,
 	.detect = intel_sdvo_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_sdvo_set_property,