aboutsummaryrefslogtreecommitdiff
path: root/drivers/leds
diff options
context:
space:
mode:
authorJingoo Han <jg1.han@samsung.com>2013-03-07 18:38:26 -0800
committerBryan Wu <cooloney@gmail.com>2013-04-01 11:04:49 -0700
commit9d04cbaadf563db3ba04426c317d3e84bc27bac1 (patch)
tree80c4d0c778ce746e145307ddb1b6b66bcf35a0ac /drivers/leds
parent84f6942cde279e812c59eed456d1f43a39ca6c40 (diff)
leds: leds-ns2: set devm_gpio_request_one() flags param correctly
The devm_gpio_request_one() flags parameter was set to: GPIOF_DIR_OUT | gpio_get_value(template->cmd) GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below: GPIOF_DIR_OUT (0 << 0) GPIOF_DIR_IN (1 << 0) So, when 'gpio_get_value(template->cmd)' is 1, the gpio pin can be set as input, instead of output. To prevent this problem, GPIOF_OUT_INIT flags should be used when using devm_gpio_request_one(). Same goes for 'gpio_get_value(template->slow)' case. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
Diffstat (limited to 'drivers/leds')
-rw-r--r--drivers/leds/leds-ns2.c6
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index d978171c25b..e02b3136273 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -193,7 +193,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
enum ns2_led_modes mode;
ret = devm_gpio_request_one(&pdev->dev, template->cmd,
- GPIOF_DIR_OUT | gpio_get_value(template->cmd),
+ gpio_get_value(template->cmd) ?
+ GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
template->name);
if (ret) {
dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
@@ -202,7 +203,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
}
ret = devm_gpio_request_one(&pdev->dev, template->slow,
- GPIOF_DIR_OUT | gpio_get_value(template->slow),
+ gpio_get_value(template->slow) ?
+ GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
template->name);
if (ret) {
dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",