aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/au1550nd.c
diff options
context:
space:
mode:
authorPete Popov <ppopov@pacbell.net>2005-09-23 02:44:58 +0100
committerThomas Gleixner <tglx@mtd.linutronix.de>2005-11-06 22:29:02 +0100
commitef6f0d1ffcd86484e01cec4fd2d2c5ca5887a43b (patch)
treeb69f78393c0c5f719e1fe0bcaccb467b126fc1a4 /drivers/mtd/nand/au1550nd.c
parent733802d974e5af42acb7cd61b16c0ce6dd03b7ed (diff)
[MTD] NAND: Alchemy board driver cleanup
- cleaned up the partitions and include files - added more flexible CS and address detection and setup Regression tested on db1200 and db1550. Signed-off-by: Pete Popov <ppopov@pacbell.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'drivers/mtd/nand/au1550nd.c')
-rw-r--r--drivers/mtd/nand/au1550nd.c115
1 files changed, 69 insertions, 46 deletions
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 4c7719ce3f4..953daf379b9 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2004 Embedded Edge, LLC
*
- * $Id: au1550nd.c,v 1.11 2004/11/04 12:53:10 gleixner Exp $
+ * $Id: au1550nd.c,v 1.12 2005/09/23 01:44:55 ppopov Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -21,13 +21,7 @@
/* fixme: this is ugly */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0)
-#include <asm/mach-au1x00/au1000.h>
-#ifdef CONFIG_MIPS_PB1550
-#include <asm/mach-pb1x00/pb1550.h>
-#endif
-#ifdef CONFIG_MIPS_DB1550
-#include <asm/mach-db1x00/db1x00.h>
-#endif
+#include <asm/mach-au1x00/au1xxx.h>
#else
#include <asm/au1000.h>
#ifdef CONFIG_MIPS_PB1550
@@ -45,39 +39,22 @@ static struct mtd_info *au1550_mtd = NULL;
static void __iomem *p_nand;
static int nand_width = 1; /* default x8*/
-#define NAND_CS 1
-
/*
* Define partitions for flash device
*/
const static struct mtd_partition partition_info[] = {
-#ifdef CONFIG_MIPS_PB1550
-#define NUM_PARTITIONS 2
- {
- .name = "Pb1550 NAND FS 0",
- .offset = 0,
- .size = 8*1024*1024
- },
- {
- .name = "Pb1550 NAND FS 1",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL
- }
-#endif
-#ifdef CONFIG_MIPS_DB1550
-#define NUM_PARTITIONS 2
{
- .name = "Db1550 NAND FS 0",
+ .name = "NAND FS 0",
.offset = 0,
- .size = 8*1024*1024
+ .size = 8*1024*1024
},
{
- .name = "Db1550 NAND FS 1",
+ .name = "NAND FS 1",
.offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL
+ .size = MTDPART_SIZ_FULL
}
-#endif
};
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
/**
@@ -339,11 +316,13 @@ int au1550_device_ready(struct mtd_info *mtd)
/*
* Main initialization routine
*/
-int __init au1550_init (void)
+int __init au1xxx_nand_init (void)
{
struct nand_chip *this;
u16 boot_swapboot = 0; /* default value */
int retval;
+ u32 mem_staddr;
+ u32 nand_phys;
/* Allocate memory for MTD device structure and private data */
au1550_mtd = kmalloc (sizeof(struct mtd_info) +
@@ -364,8 +343,11 @@ int __init au1550_init (void)
au1550_mtd->priv = this;
- /* MEM_STNDCTL: disable ints, disable nand boot */
- au_writel(0, MEM_STNDCTL);
+ /* disable interrupts */
+ au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL);
+
+ /* disable NAND boot */
+ au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL);
#ifdef CONFIG_MIPS_PB1550
/* set gpio206 high */
@@ -397,19 +379,60 @@ int __init au1550_init (void)
}
#endif
- /* Configure RCE1 - should be done by YAMON */
- au_writel(0x5 | (nand_width << 22), 0xB4001010); /* MEM_STCFG1 */
- au_writel(NAND_TIMING, 0xB4001014); /* MEM_STTIME1 */
- au_sync();
+ /* Configure chip-select; normally done by boot code, e.g. YAMON */
+#ifdef NAND_STCFG
+ if (NAND_CS == 0) {
+ au_writel(NAND_STCFG, MEM_STCFG0);
+ au_writel(NAND_STTIME, MEM_STTIME0);
+ au_writel(NAND_STADDR, MEM_STADDR0);
+ }
+ if (NAND_CS == 1) {
+ au_writel(NAND_STCFG, MEM_STCFG1);
+ au_writel(NAND_STTIME, MEM_STTIME1);
+ au_writel(NAND_STADDR, MEM_STADDR1);
+ }
+ if (NAND_CS == 2) {
+ au_writel(NAND_STCFG, MEM_STCFG2);
+ au_writel(NAND_STTIME, MEM_STTIME2);
+ au_writel(NAND_STADDR, MEM_STADDR2);
+ }
+ if (NAND_CS == 3) {
+ au_writel(NAND_STCFG, MEM_STCFG3);
+ au_writel(NAND_STTIME, MEM_STTIME3);
+ au_writel(NAND_STADDR, MEM_STADDR3);
+ }
+#endif
+
+ /* Locate NAND chip-select in order to determine NAND phys address */
+ mem_staddr = 0x00000000;
+ if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
+ mem_staddr = au_readl(MEM_STADDR0);
+ else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
+ mem_staddr = au_readl(MEM_STADDR1);
+ else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
+ mem_staddr = au_readl(MEM_STADDR2);
+ else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
+ mem_staddr = au_readl(MEM_STADDR3);
+
+ if (mem_staddr == 0x00000000) {
+ printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
+ kfree(au1550_mtd);
+ return 1;
+ }
+ nand_phys = (mem_staddr << 4) & 0xFFFC0000;
- /* setup and enable chip select, MEM_STADDR1 */
- /* we really need to decode offsets only up till 0x20 */
- au_writel((1<<28) | (NAND_PHYS_ADDR>>4) |
- (((NAND_PHYS_ADDR + 0x1000)-1) & (0x3fff<<18)>>18),
- MEM_STADDR1);
- au_sync();
+ p_nand = (void __iomem *)ioremap(nand_phys, 0x1000);
+
+ /* make controller and MTD agree */
+ if (NAND_CS == 0)
+ nand_width = au_readl(MEM_STCFG0) & (1<<22);
+ if (NAND_CS == 1)
+ nand_width = au_readl(MEM_STCFG1) & (1<<22);
+ if (NAND_CS == 2)
+ nand_width = au_readl(MEM_STCFG2) & (1<<22);
+ if (NAND_CS == 3)
+ nand_width = au_readl(MEM_STCFG3) & (1<<22);
- p_nand = ioremap(NAND_PHYS_ADDR, 0x1000);
/* Set address of hardware control function */
this->hwcontrol = au1550_hwcontrol;
@@ -438,7 +461,7 @@ int __init au1550_init (void)
}
/* Register the partitions */
- add_mtd_partitions(au1550_mtd, partition_info, NUM_PARTITIONS);
+ add_mtd_partitions(au1550_mtd, partition_info, NB_OF(partition_info));
return 0;
@@ -450,7 +473,7 @@ int __init au1550_init (void)
return retval;
}
-module_init(au1550_init);
+module_init(au1xxx_nand_init);
/*
* Clean up routine