aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/arm
diff options
context:
space:
mode:
authorKrzysztof Hałasa <khc@pm.waw.pl>2008-12-20 01:53:08 +0100
committerKrzysztof Hałasa <khc@pm.waw.pl>2008-12-22 00:42:55 +0100
commit2098c18d6cf65358dd1620154bdedbc8c8d36f44 (patch)
tree0021ff59e512a67b31cca20894086acff91107d1 /drivers/net/arm
parentb4c7d3b07257528d3c0bfd07c5b38b48beb9b6d1 (diff)
IXP4xx: Add PHYLIB support to Ethernet driver.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Diffstat (limited to 'drivers/net/arm')
-rw-r--r--drivers/net/arm/Kconfig2
-rw-r--r--drivers/net/arm/ixp4xx_eth.c194
2 files changed, 96 insertions, 100 deletions
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index abe17762e6f..2895db13bfa 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -59,7 +59,7 @@ config EP93XX_ETH
config IXP4XX_ETH
tristate "Intel IXP4xx Ethernet support"
depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
- select MII
+ select PHYLIB
help
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 44679f804be..db44ebbf45c 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -30,7 +30,7 @@
#include <linux/etherdevice.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/mii.h>
+#include <linux/phy.h>
#include <linux/platform_device.h>
#include <mach/npe.h>
#include <mach/qmgr.h>
@@ -59,7 +59,6 @@
#define NAPI_WEIGHT 16
#define MDIO_INTERVAL (3 * HZ)
#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */
-#define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */
#define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */
#define NPE_ID(port_id) ((port_id) >> 4)
@@ -164,14 +163,13 @@ struct port {
struct npe *npe;
struct net_device *netdev;
struct napi_struct napi;
- struct mii_if_info mii;
- struct delayed_work mdio_thread;
+ struct phy_device *phydev;
struct eth_plat_info *plat;
buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
struct desc *desc_tab; /* coherent */
u32 desc_tab_phys;
int id; /* logical port ID */
- u16 mii_bmcr;
+ int speed, duplex;
};
/* NPE message structure */
@@ -242,19 +240,20 @@ static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
static spinlock_t mdio_lock;
static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
+struct mii_bus *mdio_bus;
static int ports_open;
static struct port *npe_port_tab[MAX_NPES];
static struct dma_pool *dma_pool;
-static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
- int write, u16 cmd)
+static int ixp4xx_mdio_cmd(struct mii_bus *bus, int phy_id, int location,
+ int write, u16 cmd)
{
int cycles = 0;
if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
- printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
- return 0;
+ printk(KERN_ERR "%s: MII not ready to transmit\n", bus->name);
+ return -1;
}
if (write) {
@@ -273,107 +272,119 @@ static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
}
if (cycles == MAX_MDIO_RETRIES) {
- printk(KERN_ERR "%s: MII write failed\n", dev->name);
- return 0;
+ printk(KERN_ERR "%s #%i: MII write failed\n", bus->name,
+ phy_id);
+ return -1;
}
#if DEBUG_MDIO
- printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
- cycles);
+ printk(KERN_DEBUG "%s #%i: mdio_%s() took %i cycles\n", bus->name,
+ phy_id, write ? "write" : "read", cycles);
#endif
if (write)
return 0;
if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
- printk(KERN_ERR "%s: MII read failed\n", dev->name);
- return 0;
+#if DEBUG_MDIO
+ printk(KERN_DEBUG "%s #%i: MII read failed\n", bus->name,
+ phy_id);
+#endif
+ return 0xFFFF; /* don't return error */
}
return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
- (__raw_readl(&mdio_regs->mdio_status[1]) << 8);
+ ((__raw_readl(&mdio_regs->mdio_status[1]) & 0xFF) << 8);
}
-static int mdio_read(struct net_device *dev, int phy_id, int location)
+static int ixp4xx_mdio_read(struct mii_bus *bus, int phy_id, int location)
{
unsigned long flags;
- u16 val;
+ int ret;
spin_lock_irqsave(&mdio_lock, flags);
- val = mdio_cmd(dev, phy_id, location, 0, 0);
+ ret = ixp4xx_mdio_cmd(bus, phy_id, location, 0, 0);
spin_unlock_irqrestore(&mdio_lock, flags);
- return val;
+#if DEBUG_MDIO
+ printk(KERN_DEBUG "%s #%i: MII read [%i] -> 0x%X\n", bus->name,
+ phy_id, location, ret);
+#endif
+ return ret;
}
-static void mdio_write(struct net_device *dev, int phy_id, int location,
- int val)
+static int ixp4xx_mdio_write(struct mii_bus *bus, int phy_id, int location,
+ u16 val)
{
unsigned long flags;
+ int ret;
spin_lock_irqsave(&mdio_lock, flags);
- mdio_cmd(dev, phy_id, location, 1, val);
+ ret = ixp4xx_mdio_cmd(bus, phy_id, location, 1, val);
spin_unlock_irqrestore(&mdio_lock, flags);
+#if DEBUG_MDIO
+ printk(KERN_DEBUG "%s #%i: MII read [%i] <- 0x%X, err = %i\n",
+ bus->name, phy_id, location, val, ret);
+#endif
+ return ret;
}
-static void phy_reset(struct net_device *dev, int phy_id)
+static int ixp4xx_mdio_register(void)
{
- struct port *port = netdev_priv(dev);
- int cycles = 0;
+ int err;
+
+ if (!(mdio_bus = mdiobus_alloc()))
+ return -ENOMEM;
- mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
+ /* All MII PHY accesses use NPE-B Ethernet registers */
+ spin_lock_init(&mdio_lock);
+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
- while (cycles < MAX_MII_RESET_RETRIES) {
- if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-#if DEBUG_MDIO
- printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
- dev->name, cycles);
-#endif
- return;
- }
- udelay(1);
- cycles++;
- }
+ mdio_bus->name = "IXP4xx MII Bus";
+ mdio_bus->read = &ixp4xx_mdio_read;
+ mdio_bus->write = &ixp4xx_mdio_write;
+ strcpy(mdio_bus->id, "0");
- printk(KERN_ERR "%s: MII reset failed\n", dev->name);
+ if ((err = mdiobus_register(mdio_bus)))
+ mdiobus_free(mdio_bus);
+ return err;
}
-static void eth_set_duplex(struct port *port)
+static void ixp4xx_mdio_remove(void)
{
- if (port->mii.full_duplex)
- __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
- else
- __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
+ mdiobus_unregister(mdio_bus);
+ mdiobus_free(mdio_bus);
}
-static void phy_check_media(struct port *port, int init)
+static void ixp4xx_adjust_link(struct net_device *dev)
{
- if (mii_check_media(&port->mii, 1, init))
- eth_set_duplex(port);
- if (port->mii.force_media) { /* mii_check_media() doesn't work */
- struct net_device *dev = port->netdev;
- int cur_link = mii_link_ok(&port->mii);
- int prev_link = netif_carrier_ok(dev);
-
- if (!prev_link && cur_link) {
- printk(KERN_INFO "%s: link up\n", dev->name);
- netif_carrier_on(dev);
- } else if (prev_link && !cur_link) {
+ struct port *port = netdev_priv(dev);
+ struct phy_device *phydev = port->phydev;
+
+ if (!phydev->link) {
+ if (port->speed) {
+ port->speed = 0;
printk(KERN_INFO "%s: link down\n", dev->name);
- netif_carrier_off(dev);
}
+ return;
}
-}
+ if (port->speed == phydev->speed && port->duplex == phydev->duplex)
+ return;
-static void mdio_thread(struct work_struct *work)
-{
- struct port *port = container_of(work, struct port, mdio_thread.work);
+ port->speed = phydev->speed;
+ port->duplex = phydev->duplex;
- phy_check_media(port, 0);
- schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
+ if (port->duplex)
+ __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
+ &port->regs->tx_control[0]);
+ else
+ __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
+ &port->regs->tx_control[0]);
+
+ printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
+ dev->name, port->speed, port->duplex ? "full" : "half");
}
@@ -777,16 +788,9 @@ static void eth_set_mcast_list(struct net_device *dev)
static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
{
- struct port *port = netdev_priv(dev);
- unsigned int duplex_chg;
- int err;
-
if (!netif_running(dev))
return -EINVAL;
- err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
- if (duplex_chg)
- eth_set_duplex(port);
- return err;
+ return -EINVAL;
}
@@ -938,8 +942,6 @@ static int eth_open(struct net_device *dev)
}
}
- mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
-
memset(&msg, 0, sizeof(msg));
msg.cmd = NPE_VLAN_SETRXQOSENTRY;
msg.eth_id = port->id;
@@ -977,6 +979,9 @@ static int eth_open(struct net_device *dev)
return err;
}
+ port->speed = 0; /* force "link up" message */
+ phy_start(port->phydev);
+
for (i = 0; i < ETH_ALEN; i++)
__raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
__raw_writel(0x08, &port->regs->random_seed);
@@ -1004,10 +1009,8 @@ static int eth_open(struct net_device *dev)
__raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
napi_enable(&port->napi);
- phy_check_media(port, 1);
eth_set_mcast_list(dev);
netif_start_queue(dev);
- schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
eth_rx_irq, dev);
@@ -1098,14 +1101,10 @@ static int eth_close(struct net_device *dev)
printk(KERN_CRIT "%s: unable to disable loopback\n",
dev->name);
- port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
- ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
- mdio_write(dev, port->plat->phy, MII_BMCR,
- port->mii_bmcr | BMCR_PDOWN);
+ phy_stop(port->phydev);
if (!ports_open)
qmgr_disable_irq(TXDONE_QUEUE);
- cancel_rearming_delayed_work(&port->mdio_thread);
destroy_queues(port);
release_queues(port);
return 0;
@@ -1117,6 +1116,7 @@ static int __devinit eth_init_one(struct platform_device *pdev)
struct net_device *dev;
struct eth_plat_info *plat = pdev->dev.platform_data;
u32 regs_phys;
+ char phy_id[BUS_ID_SIZE];
int err;
if (!(dev = alloc_etherdev(sizeof(struct port))))
@@ -1182,22 +1182,19 @@ static int __devinit eth_init_one(struct platform_device *pdev)
__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
udelay(50);
- port->mii.dev = dev;
- port->mii.mdio_read = mdio_read;
- port->mii.mdio_write = mdio_write;
- port->mii.phy_id = plat->phy;
- port->mii.phy_id_mask = 0x1F;
- port->mii.reg_num_mask = 0x1F;
+ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy);
+ port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(port->phydev)) {
+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(port->phydev);
+ }
+
+ port->phydev->irq = PHY_POLL;
printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
npe_name(port->npe));
- phy_reset(dev, plat->phy);
- port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
- ~(BMCR_RESET | BMCR_PDOWN);
- mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
-
- INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
return 0;
err_unreg:
@@ -1231,20 +1228,19 @@ static struct platform_driver ixp4xx_eth_driver = {
static int __init eth_init_module(void)
{
+ int err;
if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
return -ENOSYS;
- /* All MII PHY accesses use NPE-B Ethernet registers */
- spin_lock_init(&mdio_lock);
- mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
- __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
-
+ if ((err = ixp4xx_mdio_register()))
+ return err;
return platform_driver_register(&ixp4xx_eth_driver);
}
static void __exit eth_cleanup_module(void)
{
platform_driver_unregister(&ixp4xx_eth_driver);
+ ixp4xx_mdio_remove();
}
MODULE_AUTHOR("Krzysztof Halasa");