sfc: Enable RX DMA scattering where possible

Enable RX DMA scattering iff an RX buffer large enough for the current
MTU will not fit into a single page and the NIC supports DMA
scattering for kernel-mode RX queues.

On Falcon and Siena, the RX_USR_BUF_SIZE field is used as the DMA
limit for both all RX queues with scatter enabled.  Set it to 1824,
matching what Onload uses now.

Maintain a statistic for frames truncated due to lack of descriptors
(rx_nodesc_trunc).  This is distinct from rx_frm_trunc which may be
incremented when scattering is disabled and implies an over-length
frame.

Whenever an MTU change causes scattering to be turned on or off,
update filters that point to the PF queues, but leave others
unchanged, as VF drivers assume scattering is off.

Add n_frags parameters to various functions, and make them iterate:
- efx_rx_packet()
- efx_recycle_rx_buffers()
- efx_rx_mk_skb()
- efx_rx_deliver()

Make efx_handle_rx_event() responsible for updating
efx_rx_queue::removed_count.

Change the RX pipeline state to a starting ring index and number of
fragments, and make __efx_rx_packet() responsible for clearing it.

Based on earlier versions by David Riddoch and Jon Cooper.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

1 files changed, 28 insertions, 7 deletions

diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index 1bc911f980b..e41b54bada7 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -69,6 +69,12 @@
 #define EFX_TXQ_TYPES		4
 #define EFX_MAX_TX_QUEUES	(EFX_TXQ_TYPES * EFX_MAX_CHANNELS)
 
+/* Maximum possible MTU the driver supports */
+#define EFX_MAX_MTU (9 * 1024)
+
+/* Size of an RX scatter buffer.  Small enough to pack 2 into a 4K page. */
+#define EFX_RX_USR_BUF_SIZE 1824
+
 /* Forward declare Precision Time Protocol (PTP) support structure. */
 struct efx_ptp_data;
 
@@ -212,7 +218,8 @@ struct efx_tx_queue {
  *	If completed: offset in @page of Ethernet header.
  * @len: If pending: length for DMA descriptor.
  *	If completed: received length, excluding hash prefix.
- * @flags: Flags for buffer and packet state.
+ * @flags: Flags for buffer and packet state.  These are only set on the
+ *	first buffer of a scattered packet.
  */
 struct efx_rx_buffer {
 	dma_addr_t dma_addr;
@@ -256,6 +263,7 @@ struct efx_rx_page_state {
  * @added_count: Number of buffers added to the receive queue.
  * @notified_count: Number of buffers given to NIC (<= @added_count).
  * @removed_count: Number of buffers removed from the receive queue.
+ * @scatter_n: Number of buffers used by current packet
  * @max_fill: RX descriptor maximum fill level (<= ring size)
  * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill
  *	(<= @max_fill)
@@ -276,6 +284,7 @@ struct efx_rx_queue {
 	unsigned int added_count;
 	unsigned int notified_count;
 	unsigned int removed_count;
+	unsigned int scatter_n;
 	unsigned int max_fill;
 	unsigned int fast_fill_trigger;
 	unsigned int min_fill;
@@ -335,6 +344,12 @@ enum efx_rx_alloc_method {
  * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors
  * @n_rx_overlength: Count of RX_OVERLENGTH errors
  * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
+ * @n_rx_nodesc_trunc: Number of RX packets truncated and then dropped due to
+ *	lack of descriptors
+ * @rx_pkt_n_frags: Number of fragments in next packet to be delivered by
+ *	__efx_rx_packet(), or zero if there is none
+ * @rx_pkt_index: Ring index of first buffer for next packet to be delivered
+ *	by __efx_rx_packet(), if @rx_pkt_n_frags != 0
  * @rx_queue: RX queue for this channel
  * @tx_queue: TX queues for this channel
  */
@@ -366,11 +381,10 @@ struct efx_channel {
 	unsigned n_rx_frm_trunc;
 	unsigned n_rx_overlength;
 	unsigned n_skbuff_leaks;
+	unsigned int n_rx_nodesc_trunc;
 
-	/* Used to pipeline received packets in order to optimise memory
-	 * access with prefetches.
-	 */
-	struct efx_rx_buffer *rx_pkt;
+	unsigned int rx_pkt_n_frags;
+	unsigned int rx_pkt_index;
 
 	struct efx_rx_queue rx_queue;
 	struct efx_tx_queue tx_queue[EFX_TXQ_TYPES];
@@ -672,8 +686,11 @@ struct vfdi_status;
  * @n_tx_channels: Number of channels used for TX
  * @rx_dma_len: Current maximum RX DMA length
  * @rx_buffer_order: Order (log2) of number of pages for each RX buffer
+ * @rx_buffer_truesize: Amortised allocation size of an RX buffer,
+ *	for use in sk_buff::truesize
  * @rx_hash_key: Toeplitz hash key for RSS
  * @rx_indir_table: Indirection table for RSS
+ * @rx_scatter: Scatter mode enabled for receives
  * @int_error_count: Number of internal errors seen recently
  * @int_error_expire: Time at which error count will be expired
  * @irq_status: Interrupt status buffer
@@ -788,8 +805,10 @@ struct efx_nic {
 	unsigned n_tx_channels;
 	unsigned int rx_dma_len;
 	unsigned int rx_buffer_order;
+	unsigned int rx_buffer_truesize;
 	u8 rx_hash_key[40];
 	u32 rx_indir_table[128];
+	bool rx_scatter;
 
 	unsigned int_error_count;
 	unsigned long int_error_expire;
@@ -920,8 +939,9 @@ static inline unsigned int efx_port_num(struct efx_nic *efx)
  * @evq_ptr_tbl_base: Event queue pointer table base address
  * @evq_rptr_tbl_base: Event queue read-pointer table base address
  * @max_dma_mask: Maximum possible DMA mask
- * @rx_buffer_hash_size: Size of hash at start of RX buffer
- * @rx_buffer_padding: Size of padding at end of RX buffer
+ * @rx_buffer_hash_size: Size of hash at start of RX packet
+ * @rx_buffer_padding: Size of padding at end of RX packet
+ * @can_rx_scatter: NIC is able to scatter packet to multiple buffers
  * @max_interrupt_mode: Highest capability interrupt mode supported
  *	from &enum efx_init_mode.
  * @phys_addr_channels: Number of channels with physically addressed
@@ -969,6 +989,7 @@ struct efx_nic_type {
 	u64 max_dma_mask;
 	unsigned int rx_buffer_hash_size;
 	unsigned int rx_buffer_padding;
+	bool can_rx_scatter;
 	unsigned int max_interrupt_mode;
 	unsigned int phys_addr_channels;
 	unsigned int timer_period_max;