aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/fec.c
diff options
context:
space:
mode:
authorUwe Kleine-König <u.kleine-koenig@pengutronix.de>2011-01-19 20:47:04 +0100
committerUwe Kleine-König <u.kleine-koenig@pengutronix.de>2011-02-15 09:26:30 +0100
commit45993653bd5935dbf975bc26a834f2ff23c9f914 (patch)
treefc2a34c1e236a52d4ac83c24d2fa8a8f91c53a90 /drivers/net/fec.c
parentdb8880bc92657559320ba8384acb2547d4255521 (diff)
net/fec: reorder functions a bit allows removing forward declarations
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Diffstat (limited to 'drivers/net/fec.c')
-rw-r--r--drivers/net/fec.c353
1 files changed, 174 insertions, 179 deletions
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 4c888f1825a..3f5dfe2e41a 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -205,13 +205,6 @@ struct fec_enet_private {
struct completion mdio_done;
};
-static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
-static void fec_enet_tx(struct net_device *ndev);
-static void fec_enet_rx(struct net_device *ndev);
-static int fec_enet_close(struct net_device *ndev);
-static void fec_restart(struct net_device *ndev, int duplex);
-static void fec_stop(struct net_device *ndev);
-
/* FEC MII MMFR bits definition */
#define FEC_MMFR_ST (1 << 30)
#define FEC_MMFR_OP_READ (2 << 28)
@@ -335,54 +328,160 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
return NETDEV_TX_OK;
}
+/* This function is called to start or restart the FEC during a link
+ * change. This only happens when switching between half and full
+ * duplex.
+ */
static void
-fec_timeout(struct net_device *ndev)
+fec_restart(struct net_device *ndev, int duplex)
{
struct fec_enet_private *fep = netdev_priv(ndev);
+ const struct platform_device_id *id_entry =
+ platform_get_device_id(fep->pdev);
+ int i;
+ u32 val, temp_mac[2];
- ndev->stats.tx_errors++;
+ /* Whack a reset. We should wait for this. */
+ writel(1, fep->hwp + FEC_ECNTRL);
+ udelay(10);
- fec_restart(ndev, fep->full_duplex);
- netif_wake_queue(ndev);
-}
+ /*
+ * enet-mac reset will reset mac address registers too,
+ * so need to reconfigure it.
+ */
+ if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
+ memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN);
+ writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW);
+ writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
+ }
-static irqreturn_t
-fec_enet_interrupt(int irq, void *dev_id)
-{
- struct net_device *ndev = dev_id;
- struct fec_enet_private *fep = netdev_priv(ndev);
- uint int_events;
- irqreturn_t ret = IRQ_NONE;
+ /* Clear any outstanding interrupt. */
+ writel(0xffc00000, fep->hwp + FEC_IEVENT);
- do {
- int_events = readl(fep->hwp + FEC_IEVENT);
- writel(int_events, fep->hwp + FEC_IEVENT);
+ /* Reset all multicast. */
+ writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+ writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+#ifndef CONFIG_M5272
+ writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
+ writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
+#endif
- if (int_events & FEC_ENET_RXF) {
- ret = IRQ_HANDLED;
- fec_enet_rx(ndev);
- }
+ /* Set maximum receive buffer size. */
+ writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
- /* Transmit OK, or non-fatal error. Update the buffer
- * descriptors. FEC handles all errors, we just discover
- * them as part of the transmit process.
- */
- if (int_events & FEC_ENET_TXF) {
- ret = IRQ_HANDLED;
- fec_enet_tx(ndev);
+ /* Set receive and transmit descriptor base. */
+ writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
+ writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE,
+ fep->hwp + FEC_X_DES_START);
+
+ fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
+ fep->cur_rx = fep->rx_bd_base;
+
+ /* Reset SKB transmit buffers. */
+ fep->skb_cur = fep->skb_dirty = 0;
+ for (i = 0; i <= TX_RING_MOD_MASK; i++) {
+ if (fep->tx_skbuff[i]) {
+ dev_kfree_skb_any(fep->tx_skbuff[i]);
+ fep->tx_skbuff[i] = NULL;
}
+ }
- if (int_events & FEC_ENET_MII) {
- ret = IRQ_HANDLED;
- complete(&fep->mdio_done);
+ /* Enable MII mode */
+ if (duplex) {
+ /* MII enable / FD enable */
+ writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL);
+ writel(0x04, fep->hwp + FEC_X_CNTRL);
+ } else {
+ /* MII enable / No Rcv on Xmit */
+ writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL);
+ writel(0x0, fep->hwp + FEC_X_CNTRL);
+ }
+ fep->full_duplex = duplex;
+
+ /* Set MII speed */
+ writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
+
+ /*
+ * The phy interface and speed need to get configured
+ * differently on enet-mac.
+ */
+ if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
+ val = readl(fep->hwp + FEC_R_CNTRL);
+
+ /* MII or RMII */
+ if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
+ val |= (1 << 8);
+ else
+ val &= ~(1 << 8);
+
+ /* 10M or 100M */
+ if (fep->phy_dev && fep->phy_dev->speed == SPEED_100)
+ val &= ~(1 << 9);
+ else
+ val |= (1 << 9);
+
+ writel(val, fep->hwp + FEC_R_CNTRL);
+ } else {
+#ifdef FEC_MIIGSK_ENR
+ if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
+ /* disable the gasket and wait */
+ writel(0, fep->hwp + FEC_MIIGSK_ENR);
+ while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
+ udelay(1);
+
+ /*
+ * configure the gasket:
+ * RMII, 50 MHz, no loopback, no echo
+ */
+ writel(1, fep->hwp + FEC_MIIGSK_CFGR);
+
+ /* re-enable the gasket */
+ writel(2, fep->hwp + FEC_MIIGSK_ENR);
}
- } while (int_events);
+#endif
+ }
- return ret;
+ /* And last, enable the transmit and receive processing */
+ writel(2, fep->hwp + FEC_ECNTRL);
+ writel(0, fep->hwp + FEC_R_DES_ACTIVE);
+
+ /* Enable interrupts we wish to service */
+ writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
+}
+
+static void
+fec_stop(struct net_device *ndev)
+{
+ struct fec_enet_private *fep = netdev_priv(ndev);
+
+ /* We cannot expect a graceful transmit stop without link !!! */
+ if (fep->link) {
+ writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */
+ udelay(10);
+ if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
+ printk("fec_stop : Graceful transmit stop did not complete !\n");
+ }
+
+ /* Whack a reset. We should wait for this. */
+ writel(1, fep->hwp + FEC_ECNTRL);
+ udelay(10);
+ writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
+ writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
}
static void
+fec_timeout(struct net_device *ndev)
+{
+ struct fec_enet_private *fep = netdev_priv(ndev);
+
+ ndev->stats.tx_errors++;
+
+ fec_restart(ndev, fep->full_duplex);
+ netif_wake_queue(ndev);
+}
+
+static void
fec_enet_tx(struct net_device *ndev)
{
struct fec_enet_private *fep;
@@ -576,6 +675,43 @@ rx_processing_done:
spin_unlock(&fep->hw_lock);
}
+static irqreturn_t
+fec_enet_interrupt(int irq, void *dev_id)
+{
+ struct net_device *ndev = dev_id;
+ struct fec_enet_private *fep = netdev_priv(ndev);
+ uint int_events;
+ irqreturn_t ret = IRQ_NONE;
+
+ do {
+ int_events = readl(fep->hwp + FEC_IEVENT);
+ writel(int_events, fep->hwp + FEC_IEVENT);
+
+ if (int_events & FEC_ENET_RXF) {
+ ret = IRQ_HANDLED;
+ fec_enet_rx(ndev);
+ }
+
+ /* Transmit OK, or non-fatal error. Update the buffer
+ * descriptors. FEC handles all errors, we just discover
+ * them as part of the transmit process.
+ */
+ if (int_events & FEC_ENET_TXF) {
+ ret = IRQ_HANDLED;
+ fec_enet_tx(ndev);
+ }
+
+ if (int_events & FEC_ENET_MII) {
+ ret = IRQ_HANDLED;
+ complete(&fep->mdio_done);
+ }
+ } while (int_events);
+
+ return ret;
+}
+
+
+
/* ------------------------------------------------------------------------- */
static void __inline__ fec_get_mac(struct net_device *ndev)
{
@@ -1217,147 +1353,6 @@ static int fec_enet_init(struct net_device *ndev)
return 0;
}
-/* This function is called to start or restart the FEC during a link
- * change. This only happens when switching between half and full
- * duplex.
- */
-static void
-fec_restart(struct net_device *ndev, int duplex)
-{
- struct fec_enet_private *fep = netdev_priv(ndev);
- const struct platform_device_id *id_entry =
- platform_get_device_id(fep->pdev);
- int i;
- u32 val, temp_mac[2];
-
- /* Whack a reset. We should wait for this. */
- writel(1, fep->hwp + FEC_ECNTRL);
- udelay(10);
-
- /*
- * enet-mac reset will reset mac address registers too,
- * so need to reconfigure it.
- */
- if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
- memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN);
- writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW);
- writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
- }
-
- /* Clear any outstanding interrupt. */
- writel(0xffc00000, fep->hwp + FEC_IEVENT);
-
- /* Reset all multicast. */
- writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
- writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-#ifndef CONFIG_M5272
- writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
- writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
-#endif
-
- /* Set maximum receive buffer size. */
- writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
-
- /* Set receive and transmit descriptor base. */
- writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
- writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE,
- fep->hwp + FEC_X_DES_START);
-
- fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
- fep->cur_rx = fep->rx_bd_base;
-
- /* Reset SKB transmit buffers. */
- fep->skb_cur = fep->skb_dirty = 0;
- for (i = 0; i <= TX_RING_MOD_MASK; i++) {
- if (fep->tx_skbuff[i]) {
- dev_kfree_skb_any(fep->tx_skbuff[i]);
- fep->tx_skbuff[i] = NULL;
- }
- }
-
- /* Enable MII mode */
- if (duplex) {
- /* MII enable / FD enable */
- writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL);
- writel(0x04, fep->hwp + FEC_X_CNTRL);
- } else {
- /* MII enable / No Rcv on Xmit */
- writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL);
- writel(0x0, fep->hwp + FEC_X_CNTRL);
- }
- fep->full_duplex = duplex;
-
- /* Set MII speed */
- writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
-
- /*
- * The phy interface and speed need to get configured
- * differently on enet-mac.
- */
- if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
- val = readl(fep->hwp + FEC_R_CNTRL);
-
- /* MII or RMII */
- if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
- val |= (1 << 8);
- else
- val &= ~(1 << 8);
-
- /* 10M or 100M */
- if (fep->phy_dev && fep->phy_dev->speed == SPEED_100)
- val &= ~(1 << 9);
- else
- val |= (1 << 9);
-
- writel(val, fep->hwp + FEC_R_CNTRL);
- } else {
-#ifdef FEC_MIIGSK_ENR
- if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
- /* disable the gasket and wait */
- writel(0, fep->hwp + FEC_MIIGSK_ENR);
- while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
- udelay(1);
-
- /*
- * configure the gasket:
- * RMII, 50 MHz, no loopback, no echo
- */
- writel(1, fep->hwp + FEC_MIIGSK_CFGR);
-
- /* re-enable the gasket */
- writel(2, fep->hwp + FEC_MIIGSK_ENR);
- }
-#endif
- }
-
- /* And last, enable the transmit and receive processing */
- writel(2, fep->hwp + FEC_ECNTRL);
- writel(0, fep->hwp + FEC_R_DES_ACTIVE);
-
- /* Enable interrupts we wish to service */
- writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
-}
-
-static void
-fec_stop(struct net_device *ndev)
-{
- struct fec_enet_private *fep = netdev_priv(ndev);
-
- /* We cannot expect a graceful transmit stop without link !!! */
- if (fep->link) {
- writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */
- udelay(10);
- if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
- printk("fec_stop : Graceful transmit stop did not complete !\n");
- }
-
- /* Whack a reset. We should wait for this. */
- writel(1, fep->hwp + FEC_ECNTRL);
- udelay(10);
- writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
- writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
-}
-
static int __devinit
fec_probe(struct platform_device *pdev)
{