diff options
| author | Rajkumar Manoharan <rmanohar@qca.qualcomm.com> | 2011-08-20 17:34:19 +0530 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2011-08-24 14:57:16 -0400 |
| commit | 8ad38d22dc6f6c244642ca1fbe9255d7d149870a (patch) | |
| tree | 86f5bc9f0a92944068a059ea935682567f0e6524 /drivers/net/wireless/ath/ath9k/ar9003_phy.c | |
| parent | a35e27802291a8119c2b12532fb5f3c1b3e565a2 (diff) | |
ath9k_hw: Disable Walsh spatial spreading for 2 chains
The Walsh bit is disabled for regulatory consideration.
FCC limit for walsh enable is lower than that for walsh disable. So
disabling walsh bit will not limit tx power/affect tx power even in
cases where we are not FCC limited (most client cards). If the tx
power is not FCC limited, then enabling/disabling walsh bit will
not affect Avg. EVM/overall performance in any visible manner.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_phy.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 88468a0d65d..33edb5653ca 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -482,7 +482,7 @@ static void ar9003_hw_set_channel_regs(struct ath_hw *ah, (REG_READ(ah, AR_PHY_GEN_CTRL) & AR_PHY_GC_ENABLE_DAC_FIFO); /* Enable 11n HT, 20 MHz */ - phymode = AR_PHY_GC_HT_EN | AR_PHY_GC_SINGLE_HT_LTF1 | AR_PHY_GC_WALSH | + phymode = AR_PHY_GC_HT_EN | AR_PHY_GC_SINGLE_HT_LTF1 | AR_PHY_GC_SHORT_GI_40 | enableDacFifo; /* Configure baseband for dynamic 20/40 operation */ |