aboutsummaryrefslogtreecommitdiff
path: root/drivers/pwm
diff options
context:
space:
mode:
authorBoris BREZILLON <linux-arm@overkiz.com>2013-01-08 16:36:42 +0100
committerThierry Reding <thierry.reding@avionic-design.de>2013-01-08 16:52:10 +0100
commit9421bade0765d8ffb86b8a99213b611278a3542a (patch)
tree83bacefbd5536255dae0fba58bff5bdacdf2b6b8 /drivers/pwm
parentd1c3ed669a2d452cacfb48c2d171a1f364dae2ed (diff)
pwm: atmel: add Timer Counter Block PWM driver
This patch adds a PWM driver based on Atmel Timer Counter Block. The Timer Counter Block is used in Waveform generator mode. A Timer Counter Block provides up to 6 PWM devices grouped by 2: * group 0 = PWM 0 and 1 * group 1 = PWM 2 and 3 * group 2 = PMW 4 and 5 PWM devices in a given group must be configured with the same period value. If a PWM device in a group tries to change the period value and the other device is already configured with a different value an error will be returned. This driver requires device tree support. The Timer Counter Block number used to create a PWM chip is given by the tc-block field in an "atmel,tcb-pwm" compatible node. This patch was tested on kizbox board (at91sam9g20 SoC) with pwm-leds. Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Diffstat (limited to 'drivers/pwm')
-rw-r--r--drivers/pwm/Kconfig12
-rw-r--r--drivers/pwm/Makefile1
-rw-r--r--drivers/pwm/pwm-atmel-tcb.c445
3 files changed, 458 insertions, 0 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e513cd99817..10b6afc94bc 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -37,6 +37,18 @@ config PWM_AB8500
To compile this driver as a module, choose M here: the module
will be called pwm-ab8500.
+config PWM_ATMEL_TCB
+ tristate "TC Block PWM"
+ depends on ATMEL_TCLIB && OF
+ help
+ Generic PWM framework driver for Atmel Timer Counter Block.
+
+ A Timer Counter Block provides 6 PWM devices grouped by 2.
+ Devices in a given group must have the same period.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-atmel-tcb.
+
config PWM_BFIN
tristate "Blackfin PWM support"
depends on BFIN_GPTIMERS
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 62a2963cfe5..94ba21e24bd 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_PWM) += core.o
obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
+obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
obj-$(CONFIG_PWM_IMX) += pwm-imx.o
obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
new file mode 100644
index 00000000000..16cb5309285
--- /dev/null
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright (C) Overkiz SAS 2012
+ *
+ * Author: Boris BREZILLON <b.brezillon@overkiz.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/atmel_tc.h>
+#include <linux/pwm.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+#define NPWM 6
+
+#define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \
+ ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
+
+#define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \
+ ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
+
+struct atmel_tcb_pwm_device {
+ enum pwm_polarity polarity; /* PWM polarity */
+ unsigned div; /* PWM clock divider */
+ unsigned duty; /* PWM duty expressed in clk cycles */
+ unsigned period; /* PWM period expressed in clk cycles */
+};
+
+struct atmel_tcb_pwm_chip {
+ struct pwm_chip chip;
+ spinlock_t lock;
+ struct atmel_tc *tc;
+ struct atmel_tcb_pwm_device *pwms[NPWM];
+};
+
+static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct atmel_tcb_pwm_chip, chip);
+}
+
+static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ enum pwm_polarity polarity)
+{
+ struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+
+ tcbpwm->polarity = polarity;
+
+ return 0;
+}
+
+static int atmel_tcb_pwm_request(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+ struct atmel_tcb_pwm_device *tcbpwm;
+ struct atmel_tc *tc = tcbpwmc->tc;
+ void __iomem *regs = tc->regs;
+ unsigned group = pwm->hwpwm / 2;
+ unsigned index = pwm->hwpwm % 2;
+ unsigned cmr;
+ int ret;
+
+ tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL);
+ if (!tcbpwm)
+ return -ENOMEM;
+
+ ret = clk_enable(tc->clk[group]);
+ if (ret) {
+ devm_kfree(chip->dev, tcbpwm);
+ return ret;
+ }
+
+ pwm_set_chip_data(pwm, tcbpwm);
+ tcbpwm->polarity = PWM_POLARITY_NORMAL;
+ tcbpwm->duty = 0;
+ tcbpwm->period = 0;
+ tcbpwm->div = 0;
+
+ spin_lock(&tcbpwmc->lock);
+ cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+ /*
+ * Get init config from Timer Counter registers if
+ * Timer Counter is already configured as a PWM generator.
+ */
+ if (cmr & ATMEL_TC_WAVE) {
+ if (index == 0)
+ tcbpwm->duty =
+ __raw_readl(regs + ATMEL_TC_REG(group, RA));
+ else
+ tcbpwm->duty =
+ __raw_readl(regs + ATMEL_TC_REG(group, RB));
+
+ tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
+ tcbpwm->period = __raw_readl(regs + ATMEL_TC_REG(group, RC));
+ cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
+ ATMEL_TC_BCMR_MASK);
+ } else
+ cmr = 0;
+
+ cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
+ __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+ spin_unlock(&tcbpwmc->lock);
+
+ tcbpwmc->pwms[pwm->hwpwm] = tcbpwm;
+
+ return 0;
+}
+
+static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+ struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+ struct atmel_tc *tc = tcbpwmc->tc;
+
+ clk_disable(tc->clk[pwm->hwpwm / 2]);
+ tcbpwmc->pwms[pwm->hwpwm] = NULL;
+ devm_kfree(chip->dev, tcbpwm);
+}
+
+static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+ struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+ struct atmel_tc *tc = tcbpwmc->tc;
+ void __iomem *regs = tc->regs;
+ unsigned group = pwm->hwpwm / 2;
+ unsigned index = pwm->hwpwm % 2;
+ unsigned cmr;
+ enum pwm_polarity polarity = tcbpwm->polarity;
+
+ /*
+ * If duty is 0 the timer will be stopped and we have to
+ * configure the output correctly on software trigger:
+ * - set output to high if PWM_POLARITY_INVERSED
+ * - set output to low if PWM_POLARITY_NORMAL
+ *
+ * This is why we're reverting polarity in this case.
+ */
+ if (tcbpwm->duty == 0)
+ polarity = !polarity;
+
+ spin_lock(&tcbpwmc->lock);
+ cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+
+ /* flush old setting and set the new one */
+ if (index == 0) {
+ cmr &= ~ATMEL_TC_ACMR_MASK;
+ if (polarity == PWM_POLARITY_INVERSED)
+ cmr |= ATMEL_TC_ASWTRG_CLEAR;
+ else
+ cmr |= ATMEL_TC_ASWTRG_SET;
+ } else {
+ cmr &= ~ATMEL_TC_BCMR_MASK;
+ if (polarity == PWM_POLARITY_INVERSED)
+ cmr |= ATMEL_TC_BSWTRG_CLEAR;
+ else
+ cmr |= ATMEL_TC_BSWTRG_SET;
+ }
+
+ __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+
+ /*
+ * Use software trigger to apply the new setting.
+ * If both PWM devices in this group are disabled we stop the clock.
+ */
+ if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC)))
+ __raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS,
+ regs + ATMEL_TC_REG(group, CCR));
+ else
+ __raw_writel(ATMEL_TC_SWTRG, regs +
+ ATMEL_TC_REG(group, CCR));
+
+ spin_unlock(&tcbpwmc->lock);
+}
+
+static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+ struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+ struct atmel_tc *tc = tcbpwmc->tc;
+ void __iomem *regs = tc->regs;
+ unsigned group = pwm->hwpwm / 2;
+ unsigned index = pwm->hwpwm % 2;
+ u32 cmr;
+ enum pwm_polarity polarity = tcbpwm->polarity;
+
+ /*
+ * If duty is 0 the timer will be stopped and we have to
+ * configure the output correctly on software trigger:
+ * - set output to high if PWM_POLARITY_INVERSED
+ * - set output to low if PWM_POLARITY_NORMAL
+ *
+ * This is why we're reverting polarity in this case.
+ */
+ if (tcbpwm->duty == 0)
+ polarity = !polarity;
+
+ spin_lock(&tcbpwmc->lock);
+ cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+
+ /* flush old setting and set the new one */
+ cmr &= ~ATMEL_TC_TCCLKS;
+
+ if (index == 0) {
+ cmr &= ~ATMEL_TC_ACMR_MASK;
+
+ /* Set CMR flags according to given polarity */
+ if (polarity == PWM_POLARITY_INVERSED)
+ cmr |= ATMEL_TC_ASWTRG_CLEAR;
+ else
+ cmr |= ATMEL_TC_ASWTRG_SET;
+ } else {
+ cmr &= ~ATMEL_TC_BCMR_MASK;
+ if (polarity == PWM_POLARITY_INVERSED)
+ cmr |= ATMEL_TC_BSWTRG_CLEAR;
+ else
+ cmr |= ATMEL_TC_BSWTRG_SET;
+ }
+
+ /*
+ * If duty is 0 or equal to period there's no need to register
+ * a specific action on RA/RB and RC compare.
+ * The output will be configured on software trigger and keep
+ * this config till next config call.
+ */
+ if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
+ if (index == 0) {
+ if (polarity == PWM_POLARITY_INVERSED)
+ cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
+ else
+ cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
+ } else {
+ if (polarity == PWM_POLARITY_INVERSED)
+ cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
+ else
+ cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
+ }
+ }
+
+ __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+
+ if (index == 0)
+ __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RA));
+ else
+ __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RB));
+
+ __raw_writel(tcbpwm->period, regs + ATMEL_TC_REG(group, RC));
+
+ /* Use software trigger to apply the new setting */
+ __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+ regs + ATMEL_TC_REG(group, CCR));
+ spin_unlock(&tcbpwmc->lock);
+ return 0;
+}
+
+static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+ struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+ unsigned group = pwm->hwpwm / 2;
+ unsigned index = pwm->hwpwm % 2;
+ struct atmel_tcb_pwm_device *atcbpwm = NULL;
+ struct atmel_tc *tc = tcbpwmc->tc;
+ int i;
+ int slowclk = 0;
+ unsigned period;
+ unsigned duty;
+ unsigned rate = clk_get_rate(tc->clk[group]);
+ unsigned long long min;
+ unsigned long long max;
+
+ /*
+ * Find best clk divisor:
+ * the smallest divisor which can fulfill the period_ns requirements.
+ */
+ for (i = 0; i < 5; ++i) {
+ if (atmel_tc_divisors[i] == 0) {
+ slowclk = i;
+ continue;
+ }
+ min = div_u64((u64)NSEC_PER_SEC * atmel_tc_divisors[i], rate);
+ max = min << tc->tcb_config->counter_width;
+ if (max >= period_ns)
+ break;
+ }
+
+ /*
+ * If none of the divisor are small enough to represent period_ns
+ * take slow clock (32KHz).
+ */
+ if (i == 5) {
+ i = slowclk;
+ rate = 32768;
+ min = div_u64(NSEC_PER_SEC, rate);
+ max = min << 16;
+
+ /* If period is too big return ERANGE error */
+ if (max < period_ns)
+ return -ERANGE;
+ }
+
+ duty = div_u64(duty_ns, min);
+ period = div_u64(period_ns, min);
+
+ if (index == 0)
+ atcbpwm = tcbpwmc->pwms[pwm->hwpwm + 1];
+ else
+ atcbpwm = tcbpwmc->pwms[pwm->hwpwm - 1];
+
+ /*
+ * PWM devices provided by TCB driver are grouped by 2:
+ * - group 0: PWM 0 & 1
+ * - group 1: PWM 2 & 3
+ * - group 2: PWM 4 & 5
+ *
+ * PWM devices in a given group must be configured with the
+ * same period_ns.
+ *
+ * We're checking the period value of the second PWM device
+ * in this group before applying the new config.
+ */
+ if ((atcbpwm && atcbpwm->duty > 0 &&
+ atcbpwm->duty != atcbpwm->period) &&
+ (atcbpwm->div != i || atcbpwm->period != period)) {
+ dev_err(chip->dev,
+ "failed to configure period_ns: PWM group already configured with a different value\n");
+ return -EINVAL;
+ }
+
+ tcbpwm->period = period;
+ tcbpwm->div = i;
+ tcbpwm->duty = duty;
+
+ /* If the PWM is enabled, call enable to apply the new conf */
+ if (test_bit(PWMF_ENABLED, &pwm->flags))
+ atmel_tcb_pwm_enable(chip, pwm);
+
+ return 0;
+}
+
+static const struct pwm_ops atmel_tcb_pwm_ops = {
+ .request = atmel_tcb_pwm_request,
+ .free = atmel_tcb_pwm_free,
+ .config = atmel_tcb_pwm_config,
+ .set_polarity = atmel_tcb_pwm_set_polarity,
+ .enable = atmel_tcb_pwm_enable,
+ .disable = atmel_tcb_pwm_disable,
+};
+
+static int atmel_tcb_pwm_probe(struct platform_device *pdev)
+{
+ struct atmel_tcb_pwm_chip *tcbpwm;
+ struct device_node *np = pdev->dev.of_node;
+ struct atmel_tc *tc;
+ int err;
+ int tcblock;
+
+ err = of_property_read_u32(np, "tc-block", &tcblock);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "failed to get Timer Counter Block number from device tree (error: %d)\n",
+ err);
+ return err;
+ }
+
+ tc = atmel_tc_alloc(tcblock, "tcb-pwm");
+ if (tc == NULL) {
+ dev_err(&pdev->dev, "failed to allocate Timer Counter Block\n");
+ return -ENOMEM;
+ }
+
+ tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
+ if (tcbpwm == NULL) {
+ atmel_tc_free(tc);
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ tcbpwm->chip.dev = &pdev->dev;
+ tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
+ tcbpwm->chip.of_xlate = of_pwm_xlate_with_flags;
+ tcbpwm->chip.of_pwm_n_cells = 3;
+ tcbpwm->chip.base = -1;
+ tcbpwm->chip.npwm = NPWM;
+ tcbpwm->tc = tc;
+
+ spin_lock_init(&tcbpwm->lock);
+
+ err = pwmchip_add(&tcbpwm->chip);
+ if (err < 0) {
+ atmel_tc_free(tc);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, tcbpwm);
+
+ return 0;
+}
+
+static int atmel_tcb_pwm_remove(struct platform_device *pdev)
+{
+ struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
+ int err;
+
+ err = pwmchip_remove(&tcbpwm->chip);
+ if (err < 0)
+ return err;
+
+ atmel_tc_free(tcbpwm->tc);
+
+ return 0;
+}
+
+static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
+ { .compatible = "atmel,tcb-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
+
+static struct platform_driver atmel_tcb_pwm_driver = {
+ .driver = {
+ .name = "atmel-tcb-pwm",
+ .of_match_table = atmel_tcb_pwm_dt_ids,
+ },
+ .probe = atmel_tcb_pwm_probe,
+ .remove = atmel_tcb_pwm_remove,
+};
+module_platform_driver(atmel_tcb_pwm_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
+MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
+MODULE_LICENSE("GPL v2");