aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/aic7xxx_old/aic7xxx.seq
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/aic7xxx_old/aic7xxx.seq
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/scsi/aic7xxx_old/aic7xxx.seq')
-rw-r--r--drivers/scsi/aic7xxx_old/aic7xxx.seq1539
1 files changed, 1539 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
new file mode 100644
index 00000000000..f6fc4b75b5a
--- /dev/null
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -0,0 +1,1539 @@
+/*
+ * Adaptec 274x/284x/294x device driver firmware for Linux and FreeBSD.
+ *
+ * Copyright (c) 1994-1999 Justin Gibbs.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification, immediately at the beginning of the file.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Where this Software is combined with software released under the terms of
+ * the GNU General Public License (GPL) and the terms of the GPL would require the
+ * combined work to also be released under the terms of the GPL, the terms
+ * and conditions of this License will apply in addition to those of the
+ * GPL with the exception of any terms or conditions of this License that
+ * conflict with, or are expressly prohibited by, the GPL.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: aic7xxx.seq,v 1.77 1998/06/28 02:58:57 gibbs Exp $
+ */
+
+#include "aic7xxx.reg"
+#include "scsi_message.h"
+
+/*
+ * A few words on the waiting SCB list:
+ * After starting the selection hardware, we check for reconnecting targets
+ * as well as for our selection to complete just in case the reselection wins
+ * bus arbitration. The problem with this is that we must keep track of the
+ * SCB that we've already pulled from the QINFIFO and started the selection
+ * on just in case the reselection wins so that we can retry the selection at
+ * a later time. This problem cannot be resolved by holding a single entry
+ * in scratch ram since a reconnecting target can request sense and this will
+ * create yet another SCB waiting for selection. The solution used here is to
+ * use byte 27 of the SCB as a pseudo-next pointer and to thread a list
+ * of SCBs that are awaiting selection. Since 0-0xfe are valid SCB indexes,
+ * SCB_LIST_NULL is 0xff which is out of range. An entry is also added to
+ * this list everytime a request sense occurs or after completing a non-tagged
+ * command for which a second SCB has been queued. The sequencer will
+ * automatically consume the entries.
+ */
+
+reset:
+ clr SCSISIGO; /* De-assert BSY */
+ and SXFRCTL1, ~BITBUCKET;
+ /* Always allow reselection */
+ mvi SCSISEQ, ENRSELI|ENAUTOATNP;
+
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ /* Ensure that no DMA operations are in progress */
+ clr CCSGCTL;
+ clr CCSCBCTL;
+ }
+
+ call clear_target_state;
+poll_for_work:
+ and SXFRCTL0, ~SPIOEN;
+ if ((p->features & AHC_QUEUE_REGS) == 0) {
+ mov A, QINPOS;
+ }
+poll_for_work_loop:
+ if ((p->features & AHC_QUEUE_REGS) == 0) {
+ and SEQCTL, ~PAUSEDIS;
+ }
+ test SSTAT0, SELDO|SELDI jnz selection;
+ test SCSISEQ, ENSELO jnz poll_for_work;
+ if ((p->features & AHC_TWIN) != 0) {
+ /*
+ * Twin channel devices cannot handle things like SELTO
+ * interrupts on the "background" channel. So, if we
+ * are selecting, keep polling the current channel util
+ * either a selection or reselection occurs.
+ */
+ xor SBLKCTL,SELBUSB; /* Toggle to the other bus */
+ test SSTAT0, SELDO|SELDI jnz selection;
+ test SCSISEQ, ENSELO jnz poll_for_work;
+ xor SBLKCTL,SELBUSB; /* Toggle back */
+ }
+ cmp WAITING_SCBH,SCB_LIST_NULL jne start_waiting;
+test_queue:
+ /* Has the driver posted any work for us? */
+ if ((p->features & AHC_QUEUE_REGS) != 0) {
+ test QOFF_CTLSTA, SCB_AVAIL jz poll_for_work_loop;
+ mov NONE, SNSCB_QOFF;
+ inc QINPOS;
+ } else {
+ or SEQCTL, PAUSEDIS;
+ cmp KERNEL_QINPOS, A je poll_for_work_loop;
+ inc QINPOS;
+ and SEQCTL, ~PAUSEDIS;
+ }
+
+/*
+ * We have at least one queued SCB now and we don't have any
+ * SCBs in the list of SCBs awaiting selection. If we have
+ * any SCBs available for use, pull the tag from the QINFIFO
+ * and get to work on it.
+ */
+ if ((p->flags & AHC_PAGESCBS) != 0) {
+ mov ALLZEROS call get_free_or_disc_scb;
+ }
+
+dequeue_scb:
+ add A, -1, QINPOS;
+ mvi QINFIFO_OFFSET call fetch_byte;
+
+ if ((p->flags & AHC_PAGESCBS) == 0) {
+ /* In the non-paging case, the SCBID == hardware SCB index */
+ mov SCBPTR, RETURN_2;
+ }
+dma_queued_scb:
+/*
+ * DMA the SCB from host ram into the current SCB location.
+ */
+ mvi DMAPARAMS, HDMAEN|DIRECTION|FIFORESET;
+ mov RETURN_2 call dma_scb;
+
+/*
+ * Preset the residual fields in case we never go through a data phase.
+ * This isn't done by the host so we can avoid a DMA to clear these
+ * fields for the normal case of I/O that completes without underrun
+ * or overrun conditions.
+ */
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ bmov SCB_RESID_DCNT, SCB_DATACNT, 3;
+ } else {
+ mov SCB_RESID_DCNT[0],SCB_DATACNT[0];
+ mov SCB_RESID_DCNT[1],SCB_DATACNT[1];
+ mov SCB_RESID_DCNT[2],SCB_DATACNT[2];
+ }
+ mov SCB_RESID_SGCNT, SCB_SGCOUNT;
+
+start_scb:
+ /*
+ * Place us on the waiting list in case our selection
+ * doesn't win during bus arbitration.
+ */
+ mov SCB_NEXT,WAITING_SCBH;
+ mov WAITING_SCBH, SCBPTR;
+start_waiting:
+ /*
+ * Pull the first entry off of the waiting SCB list.
+ */
+ mov SCBPTR, WAITING_SCBH;
+ call start_selection;
+ jmp poll_for_work;
+
+start_selection:
+ if ((p->features & AHC_TWIN) != 0) {
+ and SINDEX,~SELBUSB,SBLKCTL;/* Clear channel select bit */
+ and A,SELBUSB,SCB_TCL; /* Get new channel bit */
+ or SINDEX,A;
+ mov SBLKCTL,SINDEX; /* select channel */
+ }
+initialize_scsiid:
+ if ((p->features & AHC_ULTRA2) != 0) {
+ and A, TID, SCB_TCL; /* Get target ID */
+ and SCSIID_ULTRA2, OID; /* Clear old target */
+ or SCSIID_ULTRA2, A;
+ } else {
+ and A, TID, SCB_TCL; /* Get target ID */
+ and SCSIID, OID; /* Clear old target */
+ or SCSIID, A;
+ }
+ mov SCSIDATL, ALLZEROS; /* clear out the latched */
+ /* data register, this */
+ /* fixes a bug on some */
+ /* controllers where the */
+ /* last byte written to */
+ /* this register can leak */
+ /* onto the data bus at */
+ /* bad times, such as during */
+ /* selection timeouts */
+ mvi SCSISEQ, ENSELO|ENAUTOATNO|ENRSELI|ENAUTOATNP ret;
+
+/*
+ * Initialize Ultra mode setting and clear the SCSI channel.
+ * SINDEX should contain any additional bit's the client wants
+ * set in SXFRCTL0.
+ */
+initialize_channel:
+ or SXFRCTL0, CLRSTCNT|CLRCHN, SINDEX;
+ if ((p->features & AHC_ULTRA) != 0) {
+ultra:
+ mvi SINDEX, ULTRA_ENB+1;
+ test SAVED_TCL, 0x80 jnz ultra_2; /* Target ID > 7 */
+ dec SINDEX;
+ultra_2:
+ mov FUNCTION1,SAVED_TCL;
+ mov A,FUNCTION1;
+ test SINDIR, A jz ndx_dtr;
+ or SXFRCTL0, FAST20;
+ }
+/*
+ * Initialize SCSIRATE with the appropriate value for this target.
+ * The SCSIRATE settings for each target are stored in an array
+ * based at TARG_SCSIRATE.
+ */
+ndx_dtr:
+ shr A,4,SAVED_TCL;
+ if ((p->features & AHC_TWIN) != 0) {
+ test SBLKCTL,SELBUSB jz ndx_dtr_2;
+ or SAVED_TCL, SELBUSB;
+ or A,0x08; /* Channel B entries add 8 */
+ndx_dtr_2:
+ }
+
+ if ((p->features & AHC_ULTRA2) != 0) {
+ add SINDEX, TARG_OFFSET, A;
+ mov SCSIOFFSET, SINDIR;
+ }
+
+ add SINDEX,TARG_SCSIRATE,A;
+ mov SCSIRATE,SINDIR ret;
+
+
+selection:
+ test SSTAT0,SELDO jnz select_out;
+/*
+ * Reselection has been initiated by a target. Make a note that we've been
+ * reselected, but haven't seen an IDENTIFY message from the target yet.
+ */
+initiator_reselect:
+ mvi CLRSINT0, CLRSELDI;
+ /* XXX test for and handle ONE BIT condition */
+ and SAVED_TCL, SELID_MASK, SELID;
+ mvi CLRSINT1,CLRBUSFREE;
+ or SIMODE1, ENBUSFREE; /*
+ * We aren't expecting a
+ * bus free, so interrupt
+ * the kernel driver if it
+ * happens.
+ */
+ mvi SPIOEN call initialize_channel;
+ mvi MSG_OUT, MSG_NOOP; /* No message to send */
+ jmp ITloop;
+
+/*
+ * After the selection, remove this SCB from the "waiting SCB"
+ * list. This is achieved by simply moving our "next" pointer into
+ * WAITING_SCBH. Our next pointer will be set to null the next time this
+ * SCB is used, so don't bother with it now.
+ */
+select_out:
+ /* Turn off the selection hardware */
+ mvi SCSISEQ, ENRSELI|ENAUTOATNP; /*
+ * ATN on parity errors
+ * for "in" phases
+ */
+ mvi CLRSINT0, CLRSELDO;
+ mov SCBPTR, WAITING_SCBH;
+ mov WAITING_SCBH,SCB_NEXT;
+ mov SAVED_TCL, SCB_TCL;
+ mvi CLRSINT1,CLRBUSFREE;
+ or SIMODE1, ENBUSFREE; /*
+ * We aren't expecting a
+ * bus free, so interrupt
+ * the kernel driver if it
+ * happens.
+ */
+ mvi SPIOEN call initialize_channel;
+/*
+ * As soon as we get a successful selection, the target should go
+ * into the message out phase since we have ATN asserted.
+ */
+ mvi MSG_OUT, MSG_IDENTIFYFLAG;
+ or SEQ_FLAGS, IDENTIFY_SEEN;
+
+/*
+ * Main loop for information transfer phases. Wait for the target
+ * to assert REQ before checking MSG, C/D and I/O for the bus phase.
+ */
+ITloop:
+ call phase_lock;
+
+ mov A, LASTPHASE;
+
+ test A, ~P_DATAIN jz p_data;
+ cmp A,P_COMMAND je p_command;
+ cmp A,P_MESGOUT je p_mesgout;
+ cmp A,P_STATUS je p_status;
+ cmp A,P_MESGIN je p_mesgin;
+
+ mvi INTSTAT,BAD_PHASE; /* unknown phase - signal driver */
+ jmp ITloop; /* Try reading the bus again. */
+
+await_busfree:
+ and SIMODE1, ~ENBUSFREE;
+ call clear_target_state;
+ mov NONE, SCSIDATL; /* Ack the last byte */
+ and SXFRCTL0, ~SPIOEN;
+ test SSTAT1,REQINIT|BUSFREE jz .;
+ test SSTAT1, BUSFREE jnz poll_for_work;
+ mvi INTSTAT, BAD_PHASE;
+
+clear_target_state:
+ /*
+ * We assume that the kernel driver may reset us
+ * at any time, even in the middle of a DMA, so
+ * clear DFCNTRL too.
+ */
+ clr DFCNTRL;
+
+ /*
+ * We don't know the target we will connect to,
+ * so default to narrow transfers to avoid
+ * parity problems.
+ */
+ if ((p->features & AHC_ULTRA2) != 0) {
+ bmov SCSIRATE, ALLZEROS, 2;
+ } else {
+ clr SCSIRATE;
+ and SXFRCTL0, ~(FAST20);
+ }
+ mvi LASTPHASE, P_BUSFREE;
+ /* clear target specific flags */
+ clr SEQ_FLAGS ret;
+
+
+data_phase_reinit:
+/*
+ * If we re-enter the data phase after going through another phase, the
+ * STCNT may have been cleared, so restore it from the residual field.
+ * On Ultra2, we have to put it into the HCNT field because we have to
+ * drop the data down into the shadow layer via the preload ability.
+ */
+ if ((p->features & AHC_ULTRA2) != 0) {
+ bmov HADDR, SHADDR, 4;
+ bmov HCNT, SCB_RESID_DCNT, 3;
+ }
+ if ((p->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
+ bmov STCNT, SCB_RESID_DCNT, 3;
+ }
+ if ((p->features & AHC_CMD_CHAN) == 0) {
+ mvi DINDEX, STCNT;
+ mvi SCB_RESID_DCNT call bcopy_3;
+ }
+ jmp data_phase_loop;
+p_data:
+ if ((p->features & AHC_ULTRA2) != 0) {
+ mvi DMAPARAMS, PRELOADEN|SCSIEN|HDMAEN;
+ } else {
+ mvi DMAPARAMS, WIDEODD|SCSIEN|SDMAEN|HDMAEN|FIFORESET;
+ }
+ test LASTPHASE, IOI jnz . + 2;
+ or DMAPARAMS, DIRECTION;
+ call assert; /*
+ * Ensure entering a data
+ * phase is okay - seen identify, etc.
+ */
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ mvi CCSGADDR, CCSGADDR_MAX;
+ }
+
+ test SEQ_FLAGS, DPHASE jnz data_phase_reinit;
+ or SEQ_FLAGS, DPHASE; /* we've seen a data phase */
+ /*
+ * Initialize the DMA address and counter from the SCB.
+ * Also set SG_COUNT and SG_NEXT in memory since we cannot
+ * modify the values in the SCB itself until we see a
+ * save data pointers message.
+ */
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ bmov HADDR, SCB_DATAPTR, 7;
+ bmov SG_COUNT, SCB_SGCOUNT, 5;
+ if ((p->features & AHC_ULTRA2) == 0) {
+ bmov STCNT, HCNT, 3;
+ }
+ } else {
+ mvi DINDEX, HADDR;
+ mvi SCB_DATAPTR call bcopy_7;
+ call set_stcnt_from_hcnt;
+ mvi DINDEX, SG_COUNT;
+ mvi SCB_SGCOUNT call bcopy_5;
+ }
+data_phase_loop:
+ /* Guard against overruns */
+ test SG_COUNT, 0xff jnz data_phase_inbounds;
+/*
+ * Turn on 'Bit Bucket' mode, set the transfer count to
+ * 16meg and let the target run until it changes phase.
+ * When the transfer completes, notify the host that we
+ * had an overrun.
+ */
+ or SXFRCTL1,BITBUCKET;
+ and DMAPARAMS, ~(HDMAEN|SDMAEN);
+ if ((p->features & AHC_ULTRA2) != 0) {
+ bmov HCNT, ALLONES, 3;
+ }
+ if ((p->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
+ bmov STCNT, ALLONES, 3;
+ }
+ if ((p->features & AHC_CMD_CHAN) == 0) {
+ mvi STCNT[0], 0xFF;
+ mvi STCNT[1], 0xFF;
+ mvi STCNT[2], 0xFF;
+ }
+
+data_phase_inbounds:
+/* If we are the last SG block, tell the hardware. */
+ if ((p->features & AHC_ULTRA2) != 0) {
+ shl A, 2, SG_COUNT;
+ cmp SG_COUNT,0x01 jne data_phase_wideodd;
+ or A, LAST_SEG;
+ } else {
+ cmp SG_COUNT,0x01 jne data_phase_wideodd;
+ and DMAPARAMS, ~WIDEODD;
+ }
+data_phase_wideodd:
+ if ((p->features & AHC_ULTRA2) != 0) {
+ mov SG_CACHEPTR, A;
+ mov DFCNTRL, DMAPARAMS; /* start the operation */
+ test SXFRCTL1, BITBUCKET jnz data_phase_overrun;
+u2_preload_wait:
+ test SSTAT1, PHASEMIS jnz u2_phasemis;
+ test DFSTATUS, PRELOAD_AVAIL jz u2_preload_wait;
+ } else {
+ mov DMAPARAMS call dma;
+data_phase_dma_done:
+/* Go tell the host about any overruns */
+ test SXFRCTL1,BITBUCKET jnz data_phase_overrun;
+
+/* Exit if we had an underrun. dma clears SINDEX in this case. */
+ test SINDEX,0xff jz data_phase_finish;
+ }
+/*
+ * Advance the scatter-gather pointers
+ */
+sg_advance:
+ if ((p->features & AHC_ULTRA2) != 0) {
+ cmp SG_COUNT, 0x01 je u2_data_phase_finish;
+ } else {
+ dec SG_COUNT;
+ test SG_COUNT, 0xff jz data_phase_finish;
+ }
+
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+
+ /*
+ * Do we have any prefetch left???
+ */
+ cmp CCSGADDR, CCSGADDR_MAX jne prefetch_avail;
+
+ /*
+ * Fetch MIN(CCSGADDR_MAX, (SG_COUNT * 8)) bytes.
+ */
+ add A, -(CCSGRAM_MAXSEGS + 1), SG_COUNT;
+ mvi A, CCSGADDR_MAX;
+ jc . + 2;
+ shl A, 3, SG_COUNT;
+ mov CCHCNT, A;
+ bmov CCHADDR, SG_NEXT, 4;
+ mvi CCSGCTL, CCSGEN|CCSGRESET;
+ test CCSGCTL, CCSGDONE jz .;
+ and CCSGCTL, ~CCSGEN;
+ test CCSGCTL, CCSGEN jnz .;
+ mvi CCSGCTL, CCSGRESET;
+prefetch_avail:
+ bmov HADDR, CCSGRAM, 8;
+ if ((p->features & AHC_ULTRA2) == 0) {
+ bmov STCNT, HCNT, 3;
+ } else {
+ dec SG_COUNT;
+ }
+ } else {
+ mvi DINDEX, HADDR;
+ mvi SG_NEXT call bcopy_4;
+
+ mvi HCNT[0],SG_SIZEOF;
+ clr HCNT[1];
+ clr HCNT[2];
+
+ or DFCNTRL, HDMAEN|DIRECTION|FIFORESET;
+
+ call dma_finish;
+
+/*
+ * Copy data from FIFO into SCB data pointer and data count.
+ * This assumes that the SG segments are of the form:
+ * struct ahc_dma_seg {
+ * u_int32_t addr; four bytes, little-endian order
+ * u_int32_t len; four bytes, little endian order
+ * };
+ */
+ mvi DINDEX, HADDR;
+ call dfdat_in_7;
+ call set_stcnt_from_hcnt;
+ }
+/* Advance the SG pointer */
+ clr A; /* add sizeof(struct scatter) */
+ add SG_NEXT[0],SG_SIZEOF;
+ adc SG_NEXT[1],A;
+
+ if ((p->features & AHC_ULTRA2) != 0) {
+ jmp data_phase_loop;
+ } else {
+ test SSTAT1, REQINIT jz .;
+ test SSTAT1,PHASEMIS jz data_phase_loop;
+ }
+
+
+/*
+ * We've loaded all of our segments into the preload layer. Now, we simply
+ * have to wait for it to finish or for us to get a phasemis. And, since
+ * we'll get a phasemis if we do finish, all we really need to do is wait
+ * for a phasemis then check if we did actually complete all the segments.
+ */
+ if ((p->features & AHC_ULTRA2) != 0) {
+u2_data_phase_finish:
+ test SSTAT1, PHASEMIS jnz u2_phasemis;
+ test SG_CACHEPTR, LAST_SEG_DONE jz u2_data_phase_finish;
+ clr SG_COUNT;
+ test SSTAT1, REQINIT jz .;
+ test SSTAT1, PHASEMIS jz data_phase_loop;
+u2_phasemis:
+ call ultra2_dmafinish;
+ test SG_CACHEPTR, LAST_SEG_DONE jnz data_phase_finish;
+ test SSTAT2, SHVALID jnz u2_fixup_residual;
+ mvi INTSTAT, SEQ_SG_FIXUP;
+ jmp data_phase_finish;
+u2_fixup_residual:
+ shr ARG_1, 2, SG_CACHEPTR;
+u2_phasemis_loop:
+ and A, 0x3f, SG_COUNT;
+ cmp ARG_1, A je data_phase_finish;
+/*
+ * Subtract SG_SIZEOF from the SG_NEXT pointer and add 1 to the SG_COUNT
+ */
+ clr A;
+ add SG_NEXT[0], -SG_SIZEOF;
+ adc SG_NEXT[1], 0xff;
+ inc SG_COUNT;
+ jmp u2_phasemis_loop;
+ }
+
+data_phase_finish:
+/*
+ * After a DMA finishes, save the SG and STCNT residuals back into the SCB
+ * We use STCNT instead of HCNT, since it's a reflection of how many bytes
+ * were transferred on the SCSI (as opposed to the host) bus.
+ */
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ bmov SCB_RESID_DCNT, STCNT, 3;
+ mov SCB_RESID_SGCNT, SG_COUNT;
+ if ((p->features & AHC_ULTRA2) != 0) {
+ or SXFRCTL0, CLRSTCNT|CLRCHN;
+ }
+ } else {
+ mov SCB_RESID_DCNT[0],STCNT[0];
+ mov SCB_RESID_DCNT[1],STCNT[1];
+ mov SCB_RESID_DCNT[2],STCNT[2];
+ mov SCB_RESID_SGCNT, SG_COUNT;
+ }
+
+ jmp ITloop;
+
+data_phase_overrun:
+/*
+ * Turn off BITBUCKET mode and notify the host
+ */
+ if ((p->features & AHC_ULTRA2) != 0) {
+/*
+ * Wait for the target to quit transferring data on the SCSI bus
+ */
+ test SSTAT1, PHASEMIS jz .;
+ call ultra2_dmafinish;
+ }
+ and SXFRCTL1, ~BITBUCKET;
+ mvi INTSTAT,DATA_OVERRUN;
+ jmp ITloop;
+
+
+
+
+/*
+ * Actually turn off the DMA hardware, save our current position into the
+ * proper residual variables, wait for the next REQ signal, then jump to
+ * the ITloop. Jumping to the ITloop ensures that if we happen to get
+ * brought into the data phase again (or are still in it after our last
+ * segment) that we will properly signal an overrun to the kernel.
+ */
+ if ((p->features & AHC_ULTRA2) != 0) {
+ultra2_dmafinish:
+ test DFCNTRL, DIRECTION jnz ultra2_dmahalt;
+ and DFCNTRL, ~SCSIEN;
+ test DFCNTRL, SCSIEN jnz .;
+ if ((p->bugs & AHC_BUG_AUTOFLUSH) != 0) {
+ or DFCNTRL, FIFOFLUSH;
+ }
+ultra2_dmafifoflush:
+ if ((p->bugs & AHC_BUG_AUTOFLUSH) != 0) {
+ /*
+ * hardware bug alert! This needless set of jumps
+ * works around a glitch in the silicon. When the
+ * PCI DMA fifo goes empty, but there is still SCSI
+ * data to be flushed into the PCI DMA fifo (and from
+ * there on into main memory), the FIFOEMP bit will
+ * come on between the time when the PCI DMA buffer
+ * went empty and the next bit of data is copied from
+ * the SCSI fifo into the PCI fifo. It should only
+ * come on when both FIFOs (meaning the entire FIFO
+ * chain) are emtpy. Since it can take up to 4 cycles
+ * for new data to be copied from the SCSI fifo into
+ * the PCI fifo, testing for FIFOEMP status for 4
+ * extra times gives the needed time for any
+ * remaining SCSI fifo data to be put in the PCI fifo
+ * before we declare it *truly* empty.
+ */
+ test DFSTATUS, FIFOEMP jz ultra2_dmafifoflush;
+ test DFSTATUS, FIFOEMP jz ultra2_dmafifoflush;
+ test DFSTATUS, FIFOEMP jz ultra2_dmafifoflush;
+ test DFSTATUS, FIFOEMP jz ultra2_dmafifoflush;
+ }
+ test DFSTATUS, FIFOEMP jz ultra2_dmafifoflush;
+ test DFSTATUS, MREQPEND jnz .;
+ultra2_dmahalt:
+ and DFCNTRL, ~(HDMAEN|SCSIEN);
+ test DFCNTRL, (HDMAEN|SCSIEN) jnz .;
+ ret;
+ }
+
+/*
+ * Command phase. Set up the DMA registers and let 'er rip.
+ */
+p_command:
+ call assert;
+
+/*
+ * Load HADDR and HCNT.
+ */
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ bmov HADDR, SCB_CMDPTR, 5;
+ bmov HCNT[1], ALLZEROS, 2;
+ if ((p->features & AHC_ULTRA2) == 0) {
+ bmov STCNT, HCNT, 3;
+ }
+ } else {
+ mvi DINDEX, HADDR;
+ mvi SCB_CMDPTR call bcopy_5;
+ clr HCNT[1];
+ clr HCNT[2];
+ call set_stcnt_from_hcnt;
+ }
+
+ if ((p->features & AHC_ULTRA2) == 0) {
+ mvi (SCSIEN|SDMAEN|HDMAEN|DIRECTION|FIFORESET) call dma;
+ } else {
+ mvi DFCNTRL, (PRELOADEN|SCSIEN|HDMAEN|DIRECTION);
+ test SSTAT0, SDONE jnz .;
+p_command_dma_loop:
+ test SSTAT0, SDONE jnz p_command_ultra2_dma_done;
+ test SSTAT1,PHASEMIS jz p_command_dma_loop; /* ie. underrun */
+p_command_ultra2_dma_done:
+ test SCSISIGI, REQI jz p_command_ultra2_shutdown;
+ test SSTAT1, (PHASEMIS|REQINIT) jz p_command_ultra2_dma_done;
+p_command_ultra2_shutdown:
+ and DFCNTRL, ~(HDMAEN|SCSIEN);
+ test DFCNTRL, (HDMAEN|SCSIEN) jnz .;
+ or SXFRCTL0, CLRSTCNT|CLRCHN;
+ }
+ jmp ITloop;
+
+/*
+ * Status phase. Wait for the data byte to appear, then read it
+ * and store it into the SCB.
+ */
+p_status:
+ call assert;
+
+ mov SCB_TARGET_STATUS, SCSIDATL;
+ jmp ITloop;
+
+/*
+ * Message out phase. If MSG_OUT is 0x80, build I full indentify message
+ * sequence and send it to the target. In addition, if the MK_MESSAGE bit
+ * is set in the SCB_CONTROL byte, interrupt the host and allow it to send
+ * it's own message.
+ *
+ * If MSG_OUT is == HOST_MSG, also interrupt the host and take a message.
+ * This is done to allow the hsot to send messages outside of an identify
+ * sequence while protecting the seqencer from testing the MK_MESSAGE bit
+ * on an SCB that might not be for the current nexus. (For example, a
+ * BDR message in responce to a bad reselection would leave us pointed to
+ * an SCB that doesn't have anything to do with the current target).
+ * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
+ * bus device reset).
+ *
+ * When there are no messages to send, MSG_OUT should be set to MSG_NOOP,
+ * in case the target decides to put us in this phase for some strange
+ * reason.
+ */
+p_mesgout_retry:
+ or SCSISIGO,ATNO,LASTPHASE;/* turn on ATN for the retry */
+p_mesgout:
+ mov SINDEX, MSG_OUT;
+ cmp SINDEX, MSG_IDENTIFYFLAG jne p_mesgout_from_host;
+p_mesgout_identify:
+ if ((p->features & AHC_WIDE) != 0) {
+ and SINDEX,0xf,SCB_TCL; /* lun */
+ } else {
+ and SINDEX,0x7,SCB_TCL; /* lun */
+ }
+ and A,DISCENB,SCB_CONTROL; /* mask off disconnect privledge */
+ or SINDEX,A; /* or in disconnect privledge */
+ or SINDEX,MSG_IDENTIFYFLAG;
+p_mesgout_mk_message:
+ test SCB_CONTROL,MK_MESSAGE jz p_mesgout_tag;
+ mov SCSIDATL, SINDEX; /* Send the last byte */
+ jmp p_mesgout_from_host + 1;/* Skip HOST_MSG test */
+/*
+ * Send a tag message if TAG_ENB is set in the SCB control block.
+ * Use SCB_TAG (the position in the kernel's SCB array) as the tag value.
+ */
+p_mesgout_tag:
+ test SCB_CONTROL,TAG_ENB jz p_mesgout_onebyte;
+ mov SCSIDATL, SINDEX; /* Send the identify message */
+ call phase_lock;
+ cmp LASTPHASE, P_MESGOUT jne p_mesgout_done;
+ and SCSIDATL,TAG_ENB|SCB_TAG_TYPE,SCB_CONTROL;
+ call phase_lock;
+ cmp LASTPHASE, P_MESGOUT jne p_mesgout_done;
+ mov SCB_TAG jmp p_mesgout_onebyte;
+/*
+ * Interrupt the driver, and allow it to send a message
+ * if it asks.
+ */
+p_mesgout_from_host:
+ cmp SINDEX, HOST_MSG jne p_mesgout_onebyte;
+ mvi INTSTAT,AWAITING_MSG;
+ nop;
+ /*
+ * Did the host detect a phase change?
+ */
+ cmp RETURN_1, MSGOUT_PHASEMIS je p_mesgout_done;
+
+p_mesgout_onebyte:
+ mvi CLRSINT1, CLRATNO;
+ mov SCSIDATL, SINDEX;
+
+/*
+ * If the next bus phase after ATN drops is a message out, it means
+ * that the target is requesting that the last message(s) be resent.
+ */
+ call phase_lock;
+ cmp LASTPHASE, P_MESGOUT je p_mesgout_retry;
+
+p_mesgout_done:
+ mvi CLRSINT1,CLRATNO; /* Be sure to turn ATNO off */
+ mov LAST_MSG, MSG_OUT;
+ cmp MSG_OUT, MSG_IDENTIFYFLAG jne . + 2;
+ and SCB_CONTROL, ~MK_MESSAGE;
+ mvi MSG_OUT, MSG_NOOP; /* No message left */
+ jmp ITloop;
+
+/*
+ * Message in phase. Bytes are read using Automatic PIO mode.
+ */
+p_mesgin:
+ mvi ACCUM call inb_first; /* read the 1st message byte */
+
+ test A,MSG_IDENTIFYFLAG jnz mesgin_identify;
+ cmp A,MSG_DISCONNECT je mesgin_disconnect;
+ cmp A,MSG_SAVEDATAPOINTER je mesgin_sdptrs;
+ cmp ALLZEROS,A je mesgin_complete;
+ cmp A,MSG_RESTOREPOINTERS je mesgin_rdptrs;
+ cmp A,MSG_EXTENDED je mesgin_extended;
+ cmp A,MSG_MESSAGE_REJECT je mesgin_reject;
+ cmp A,MSG_NOOP je mesgin_done;
+ cmp A,MSG_IGN_WIDE_RESIDUE je mesgin_wide_residue;
+
+rej_mesgin:
+/*
+ * We have no idea what this message in is, so we issue a message reject
+ * and hope for the best. In any case, rejection should be a rare
+ * occurrence - signal the driver when it happens.
+ */
+ mvi INTSTAT,SEND_REJECT; /* let driver know */
+
+ mvi MSG_MESSAGE_REJECT call mk_mesg;
+
+mesgin_done:
+ mov NONE,SCSIDATL; /*dummy read from latch to ACK*/
+ jmp ITloop;
+
+
+mesgin_complete:
+/*
+ * We got a "command complete" message, so put the SCB_TAG into the QOUTFIFO,
+ * and trigger a completion interrupt. Before doing so, check to see if there
+ * is a residual or the status byte is something other than STATUS_GOOD (0).
+ * In either of these conditions, we upload the SCB back to the host so it can
+ * process this information. In the case of a non zero status byte, we
+ * additionally interrupt the kernel driver synchronously, allowing it to
+ * decide if sense should be retrieved. If the kernel driver wishes to request
+ * sense, it will fill the kernel SCB with a request sense command and set
+ * RETURN_1 to SEND_SENSE. If RETURN_1 is set to SEND_SENSE we redownload
+ * the SCB, and process it as the next command by adding it to the waiting list.
+ * If the kernel driver does not wish to request sense, it need only clear
+ * RETURN_1, and the command is allowed to complete normally. We don't bother
+ * to post to the QOUTFIFO in the error cases since it would require extra
+ * work in the kernel driver to ensure that the entry was removed before the
+ * command complete code tried processing it.
+ */
+
+/*
+ * First check for residuals
+ */
+ test SCB_RESID_SGCNT,0xff jnz upload_scb;
+ test SCB_TARGET_STATUS,0xff jz complete; /* Good Status? */
+upload_scb:
+ mvi DMAPARAMS, FIFORESET;
+ mov SCB_TAG call dma_scb;
+check_status:
+ test SCB_TARGET_STATUS,0xff jz complete; /* Just a residual? */
+ mvi INTSTAT,BAD_STATUS; /* let driver know */
+ nop;
+ cmp RETURN_1, SEND_SENSE jne complete;
+ /* This SCB becomes the next to execute as it will retrieve sense */
+ mvi DMAPARAMS, HDMAEN|DIRECTION|FIFORESET;
+ mov SCB_TAG call dma_scb;
+add_to_waiting_list:
+ mov SCB_NEXT,WAITING_SCBH;
+ mov WAITING_SCBH, SCBPTR;
+ /*
+ * Prepare our selection hardware before the busfree so we have a
+ * high probability of winning arbitration.
+ */
+ call start_selection;
+ jmp await_busfree;
+
+complete:
+ /* If we are untagged, clear our address up in host ram */
+ test SCB_CONTROL, TAG_ENB jnz complete_post;
+ mov A, SAVED_TCL;
+ mvi UNTAGGEDSCB_OFFSET call post_byte_setup;
+ mvi SCB_LIST_NULL call post_byte;
+
+complete_post:
+ /* Post the SCB and issue an interrupt */
+ if ((p->features & AHC_QUEUE_REGS) != 0) {
+ mov A, SDSCB_QOFF;
+ } else {
+ mov A, QOUTPOS;
+ }
+ mvi QOUTFIFO_OFFSET call post_byte_setup;
+ mov SCB_TAG call post_byte;
+ if ((p->features & AHC_QUEUE_REGS) == 0) {
+ inc QOUTPOS;
+ }
+ mvi INTSTAT,CMDCMPLT;
+
+add_to_free_list:
+ call add_scb_to_free_list;
+ jmp await_busfree;
+
+/*
+ * Is it an extended message? Copy the message to our message buffer and
+ * notify the host. The host will tell us whether to reject this message,
+ * respond to it with the message that the host placed in our message buffer,
+ * or simply to do nothing.
+ */
+mesgin_extended:
+ mvi INTSTAT,EXTENDED_MSG; /* let driver know */
+ jmp ITloop;
+
+/*
+ * Is it a disconnect message? Set a flag in the SCB to remind us
+ * and await the bus going free.
+ */
+mesgin_disconnect:
+ or SCB_CONTROL,DISCONNECTED;
+ call add_scb_to_disc_list;
+ jmp await_busfree;
+
+/*
+ * Save data pointers message:
+ * Copying RAM values back to SCB, for Save Data Pointers message, but
+ * only if we've actually been into a data phase to change them. This
+ * protects against bogus data in scratch ram and the residual counts
+ * since they are only initialized when we go into data_in or data_out.
+ */
+mesgin_sdptrs:
+ test SEQ_FLAGS, DPHASE jz mesgin_done;
+ /*
+ * The SCB SGPTR becomes the next one we'll download,
+ * and the SCB DATAPTR becomes the current SHADDR.
+ * Use the residual number since STCNT is corrupted by
+ * any message transfer.
+ */
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ bmov SCB_SGCOUNT, SG_COUNT, 5;
+ bmov SCB_DATAPTR, SHADDR, 4;
+ bmov SCB_DATACNT, SCB_RESID_DCNT, 3;
+ } else {
+ mvi DINDEX, SCB_SGCOUNT;
+ mvi SG_COUNT call bcopy_5;
+ mvi DINDEX, SCB_DATAPTR;
+ mvi SHADDR call bcopy_4;
+ mvi SCB_RESID_DCNT call bcopy_3;
+ }
+ jmp mesgin_done;
+
+/*
+ * Restore pointers message? Data pointers are recopied from the
+ * SCB anytime we enter a data phase for the first time, so all
+ * we need to do is clear the DPHASE flag and let the data phase
+ * code do the rest.
+ */
+mesgin_rdptrs:
+ and SEQ_FLAGS, ~DPHASE; /*
+ * We'll reload them
+ * the next time through
+ * the dataphase.
+ */
+ jmp mesgin_done;
+
+/*
+ * Identify message? For a reconnecting target, this tells us the lun
+ * that the reconnection is for - find the correct SCB and switch to it,
+ * clearing the "disconnected" bit so we don't "find" it by accident later.
+ */
+mesgin_identify:
+
+ if ((p->features & AHC_WIDE) != 0) {
+ and A,0x0f; /* lun in lower four bits */
+ } else {
+ and A,0x07; /* lun in lower three bits */
+ }
+ or SAVED_TCL,A; /* SAVED_TCL should be complete now */
+
+ mvi ARG_2, SCB_LIST_NULL; /* SCBID of prev SCB in disc List */
+ call get_untagged_SCBID;
+ cmp ARG_1, SCB_LIST_NULL je snoop_tag;
+ if ((p->flags & AHC_PAGESCBS) != 0) {
+ test SEQ_FLAGS, SCBPTR_VALID jz use_retrieveSCB;
+ }
+ /*
+ * If the SCB was found in the disconnected list (as is
+ * always the case in non-paging scenarios), SCBPTR is already
+ * set to the correct SCB. So, simply setup the SCB and get
+ * on with things.
+ */
+ mov SCBPTR call rem_scb_from_disc_list;
+ jmp setup_SCB;
+/*
+ * Here we "snoop" the bus looking for a SIMPLE QUEUE TAG message.
+ * If we get one, we use the tag returned to find the proper
+ * SCB. With SCB paging, this requires using search for both tagged
+ * and non-tagged transactions since the SCB may exist in any slot.
+ * If we're not using SCB paging, we can use the tag as the direct
+ * index to the SCB.
+ */
+snoop_tag:
+ mov NONE,SCSIDATL; /* ACK Identify MSG */
+snoop_tag_loop:
+ call phase_lock;
+ cmp LASTPHASE, P_MESGIN jne not_found;
+ cmp SCSIBUSL,MSG_SIMPLE_Q_TAG jne not_found;
+get_tag:
+ mvi ARG_1 call inb_next; /* tag value */
+
+use_retrieveSCB:
+ call retrieveSCB;
+setup_SCB:
+ mov A, SAVED_TCL;
+ cmp SCB_TCL, A jne not_found_cleanup_scb;
+ test SCB_CONTROL,DISCONNECTED jz not_found_cleanup_scb;
+ and SCB_CONTROL,~DISCONNECTED;
+ or SEQ_FLAGS,IDENTIFY_SEEN; /* make note of IDENTIFY */
+ /* See if the host wants to send a message upon reconnection */
+ test SCB_CONTROL, MK_MESSAGE jz mesgin_done;
+ and SCB_CONTROL, ~MK_MESSAGE;
+ mvi HOST_MSG call mk_mesg;
+ jmp mesgin_done;
+
+not_found_cleanup_scb:
+ test SCB_CONTROL, DISCONNECTED jz . + 3;
+ call add_scb_to_disc_list;
+ jmp not_found;
+ call add_scb_to_free_list;
+not_found:
+ mvi INTSTAT, NO_MATCH;
+ mvi MSG_BUS_DEV_RESET call mk_mesg;
+ jmp mesgin_done;
+
+/*
+ * Message reject? Let the kernel driver handle this. If we have an
+ * outstanding WDTR or SDTR negotiation, assume that it's a response from
+ * the target selecting 8bit or asynchronous transfer, otherwise just ignore
+ * it since we have no clue what it pertains to.
+ */
+mesgin_reject:
+ mvi INTSTAT, REJECT_MSG;
+ jmp mesgin_done;
+
+/*
+ * Wide Residue. We handle the simple cases, but pass of the one hard case
+ * to the kernel (when the residue byte happened to cause us to advance our
+ * sg element array, so we know have to back that advance out).
+ */
+mesgin_wide_residue:
+ mvi ARG_1 call inb_next; /* ACK the wide_residue and get */
+ /* the size byte */
+/*
+ * In order for this to be reliable, we have to do all sorts of horrible
+ * magic in terms of resetting the datafifo and reloading the shadow layer
+ * with the correct new values (so that a subsequent save data pointers
+ * message will do the right thing). We let the kernel do that work.
+ */
+ mvi INTSTAT, WIDE_RESIDUE;
+ jmp mesgin_done;
+
+/*
+ * [ ADD MORE MESSAGE HANDLING HERE ]
+ */
+
+/*
+ * Locking the driver out, build a one-byte message passed in SINDEX
+ * if there is no active message already. SINDEX is returned intact.
+ */
+mk_mesg:
+ or SCSISIGO,ATNO,LASTPHASE;/* turn on ATNO */
+ mov MSG_OUT,SINDEX ret;
+
+/*
+ * Functions to read data in Automatic PIO mode.
+ *
+ * According to Adaptec's documentation, an ACK is not sent on input from
+ * the target until SCSIDATL is read from. So we wait until SCSIDATL is
+ * latched (the usual way), then read the data byte directly off the bus
+ * using SCSIBUSL. When we have pulled the ATN line, or we just want to
+ * acknowledge the byte, then we do a dummy read from SCISDATL. The SCSI
+ * spec guarantees that the target will hold the data byte on the bus until
+ * we send our ACK.
+ *
+ * The assumption here is that these are called in a particular sequence,
+ * and that REQ is already set when inb_first is called. inb_{first,next}
+ * use the same calling convention as inb.
+ */
+
+inb_next:
+ mov NONE,SCSIDATL; /*dummy read from latch to ACK*/
+inb_next_wait:
+ /*
+ * If there is a parity error, wait for the kernel to
+ * see the interrupt and prepare our message response
+ * before continuing.
+ */
+ test SSTAT1, REQINIT jz inb_next_wait;
+ test SSTAT1, SCSIPERR jnz .;
+ and LASTPHASE, PHASE_MASK, SCSISIGI;
+ cmp LASTPHASE, P_MESGIN jne mesgin_phasemis;
+inb_first:
+ mov DINDEX,SINDEX;
+ mov DINDIR,SCSIBUSL ret; /*read byte directly from bus*/
+inb_last:
+ mov NONE,SCSIDATL ret; /*dummy read from latch to ACK*/
+
+
+mesgin_phasemis:
+/*
+ * We expected to receive another byte, but the target changed phase
+ */
+ mvi INTSTAT, MSGIN_PHASEMIS;
+ jmp ITloop;
+
+/*
+ * DMA data transfer. HADDR and HCNT must be loaded first, and
+ * SINDEX should contain the value to load DFCNTRL with - 0x3d for
+ * host->scsi, or 0x39 for scsi->host. The SCSI channel is cleared
+ * during initialization.
+ */
+if ((p->features & AHC_ULTRA2) == 0) {
+dma:
+ mov DFCNTRL,SINDEX;
+dma_loop:
+ test SSTAT0,DMADONE jnz dma_dmadone;
+ test SSTAT1,PHASEMIS jz dma_loop; /* ie. underrun */
+dma_phasemis:
+ test SSTAT0,SDONE jnz dma_checkfifo;
+ mov SINDEX,ALLZEROS; /* Notify caller of phasemiss */
+
+/*
+ * We will be "done" DMAing when the transfer count goes to zero, or
+ * the target changes the phase (in light of this, it makes sense that
+ * the DMA circuitry doesn't ACK when PHASEMIS is active). If we are
+ * doing a SCSI->Host transfer, the data FIFO should be flushed auto-
+ * magically on STCNT=0 or a phase change, so just wait for FIFO empty
+ * status.
+ */
+dma_checkfifo:
+ test DFCNTRL,DIRECTION jnz dma_fifoempty;
+dma_fifoflush:
+ test DFSTATUS,FIFOEMP jz dma_fifoflush;
+
+dma_fifoempty:
+ /* Don't clobber an inprogress host data transfer */
+ test DFSTATUS, MREQPEND jnz dma_fifoempty;
+/*
+ * Now shut the DMA enables off and make sure that the DMA enables are
+ * actually off first lest we get an ILLSADDR.
+ */
+dma_dmadone:
+ cmp LASTPHASE, P_COMMAND je dma_await_nreq;
+ test SCSIRATE, 0x0f jnz dma_shutdown;
+dma_await_nreq:
+ test SCSISIGI, REQI jz dma_shutdown;
+ test SSTAT1, (PHASEMIS|REQINIT) jz dma_await_nreq;
+dma_shutdown:
+ and DFCNTRL, ~(SCSIEN|SDMAEN|HDMAEN);
+dma_halt:
+ /*
+ * Some revisions of the aic7880 have a problem where, if the
+ * data fifo is full, but the PCI input latch is not empty,
+ * HDMAEN cannot be cleared. The fix used here is to attempt
+ * to drain the data fifo until there is space for the input
+ * latch to drain and HDMAEN de-asserts.
+ */
+ if ((p->bugs & AHC_BUG_PCI_2_1_RETRY) != 0) {
+ mov NONE, DFDAT;
+ }
+ test DFCNTRL, (SCSIEN|SDMAEN|HDMAEN) jnz dma_halt;
+}
+return:
+ ret;
+
+/*
+ * Assert that if we've been reselected, then we've seen an IDENTIFY
+ * message.
+ */
+assert:
+ test SEQ_FLAGS,IDENTIFY_SEEN jnz return; /* seen IDENTIFY? */
+
+ mvi INTSTAT,NO_IDENT ret; /* no - tell the kernel */
+
+/*
+ * Locate a disconnected SCB either by SAVED_TCL (ARG_1 is SCB_LIST_NULL)
+ * or by the SCBID ARG_1. The search begins at the SCB index passed in
+ * via SINDEX which is an SCB that must be on the disconnected list. If
+ * the SCB cannot be found, SINDEX will be SCB_LIST_NULL, otherwise, SCBPTR
+ * is set to the proper SCB.
+ */
+findSCB:
+ mov SCBPTR,SINDEX; /* Initialize SCBPTR */
+ cmp ARG_1, SCB_LIST_NULL jne findSCB_by_SCBID;
+ mov A, SAVED_TCL;
+ mvi SCB_TCL jmp findSCB_loop; /* &SCB_TCL -> SINDEX */
+findSCB_by_SCBID:
+ mov A, ARG_1; /* Tag passed in ARG_1 */
+ mvi SCB_TAG jmp findSCB_loop; /* &SCB_TAG -> SINDEX */
+findSCB_next:
+ mov ARG_2, SCBPTR;
+ cmp SCB_NEXT, SCB_LIST_NULL je notFound;
+ mov SCBPTR,SCB_NEXT;
+ dec SINDEX; /* Last comparison moved us too far */
+findSCB_loop:
+ cmp SINDIR, A jne findSCB_next;
+ mov SINDEX, SCBPTR ret;
+notFound:
+ mvi SINDEX, SCB_LIST_NULL ret;
+
+/*
+ * Retrieve an SCB by SCBID first searching the disconnected list falling
+ * back to DMA'ing the SCB down from the host. This routine assumes that
+ * ARG_1 is the SCBID of interrest and that SINDEX is the position in the
+ * disconnected list to start the search from. If SINDEX is SCB_LIST_NULL,
+ * we go directly to the host for the SCB.
+ */
+retrieveSCB:
+ test SEQ_FLAGS, SCBPTR_VALID jz retrieve_from_host;
+ mov SCBPTR call findSCB; /* Continue the search */
+ cmp SINDEX, SCB_LIST_NULL je retrieve_from_host;
+
+/*
+ * This routine expects SINDEX to contain the index of the SCB to be
+ * removed, SCBPTR to be pointing to that SCB, and ARG_2 to be the
+ * SCBID of the SCB just previous to this one in the list or SCB_LIST_NULL
+ * if it is at the head.
+ */
+rem_scb_from_disc_list:
+/* Remove this SCB from the disconnection list */
+ cmp ARG_2, SCB_LIST_NULL je rHead;
+ mov DINDEX, SCB_NEXT;
+ mov SCBPTR, ARG_2;
+ mov SCB_NEXT, DINDEX;
+ mov SCBPTR, SINDEX ret;
+rHead:
+ mov DISCONNECTED_SCBH,SCB_NEXT ret;
+
+retrieve_from_host:
+/*
+ * We didn't find it. Pull an SCB and DMA down the one we want.
+ * We should never get here in the non-paging case.
+ */
+ mov ALLZEROS call get_free_or_disc_scb;
+ mvi DMAPARAMS, HDMAEN|DIRECTION|FIFORESET;
+ /* Jump instead of call as we want to return anyway */
+ mov ARG_1 jmp dma_scb;
+
+/*
+ * Determine whether a target is using tagged or non-tagged transactions
+ * by first looking for a matching transaction based on the TCL and if
+ * that fails, looking up this device in the host's untagged SCB array.
+ * The TCL to search for is assumed to be in SAVED_TCL. The value is
+ * returned in ARG_1 (SCB_LIST_NULL for tagged, SCBID for non-tagged).
+ * The SCBPTR_VALID bit is set in SEQ_FLAGS if we found the information
+ * in an SCB instead of having to go to the host.
+ */
+get_untagged_SCBID:
+ cmp DISCONNECTED_SCBH, SCB_LIST_NULL je get_SCBID_from_host;
+ mvi ARG_1, SCB_LIST_NULL;
+ mov DISCONNECTED_SCBH call findSCB;
+ cmp SINDEX, SCB_LIST_NULL je get_SCBID_from_host;
+ or SEQ_FLAGS, SCBPTR_VALID;/* Was in disconnected list */
+ test SCB_CONTROL, TAG_ENB jnz . + 2;
+ mov ARG_1, SCB_TAG ret;
+ mvi ARG_1, SCB_LIST_NULL ret;
+
+/*
+ * Fetch a byte from host memory given an index of (A + (256 * SINDEX))
+ * and a base address of SCBID_ADDR. The byte is returned in RETURN_2.
+ */
+fetch_byte:
+ mov ARG_2, SINDEX;
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ mvi DINDEX, CCHADDR;
+ mvi SCBID_ADDR call set_1byte_addr;
+ mvi CCHCNT, 1;
+ mvi CCSGCTL, CCSGEN|CCSGRESET;
+ test CCSGCTL, CCSGDONE jz .;
+ mvi CCSGCTL, CCSGRESET;
+ bmov RETURN_2, CCSGRAM, 1 ret;
+ } else {
+ mvi DINDEX, HADDR;
+ mvi SCBID_ADDR call set_1byte_addr;
+ mvi HCNT[0], 1;
+ clr HCNT[1];
+ clr HCNT[2];
+ mvi DFCNTRL, HDMAEN|DIRECTION|FIFORESET;
+ call dma_finish;
+ mov RETURN_2, DFDAT ret;
+ }
+
+/*
+ * Prepare the hardware to post a byte to host memory given an
+ * index of (A + (256 * SINDEX)) and a base address of SCBID_ADDR.
+ */
+post_byte_setup:
+ mov ARG_2, SINDEX;
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ mvi DINDEX, CCHADDR;
+ mvi SCBID_ADDR call set_1byte_addr;
+ mvi CCHCNT, 1;
+ mvi CCSCBCTL, CCSCBRESET ret;
+ } else {
+ mvi DINDEX, HADDR;
+ mvi SCBID_ADDR call set_1byte_addr;
+ mvi HCNT[0], 1;
+ clr HCNT[1];
+ clr HCNT[2];
+ mvi DFCNTRL, FIFORESET ret;
+ }
+
+post_byte:
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ bmov CCSCBRAM, SINDEX, 1;
+ or CCSCBCTL, CCSCBEN|CCSCBRESET;
+ test CCSCBCTL, CCSCBDONE jz .;
+ clr CCSCBCTL ret;
+ } else {
+ mov DFDAT, SINDEX;
+ or DFCNTRL, HDMAEN|FIFOFLUSH;
+ jmp dma_finish;
+ }
+
+get_SCBID_from_host:
+ mov A, SAVED_TCL;
+ mvi UNTAGGEDSCB_OFFSET call fetch_byte;
+ mov RETURN_1, RETURN_2 ret;
+
+phase_lock:
+ test SSTAT1, REQINIT jz phase_lock;
+ test SSTAT1, SCSIPERR jnz phase_lock;
+ and SCSISIGO, PHASE_MASK, SCSISIGI;
+ and LASTPHASE, PHASE_MASK, SCSISIGI ret;
+
+if ((p->features & AHC_CMD_CHAN) == 0) {
+set_stcnt_from_hcnt:
+ mov STCNT[0], HCNT[0];
+ mov STCNT[1], HCNT[1];
+ mov STCNT[2], HCNT[2] ret;
+
+bcopy_7:
+ mov DINDIR, SINDIR;
+ mov DINDIR, SINDIR;
+bcopy_5:
+ mov DINDIR, SINDIR;
+bcopy_4:
+ mov DINDIR, SINDIR;
+bcopy_3:
+ mov DINDIR, SINDIR;
+ mov DINDIR, SINDIR;
+ mov DINDIR, SINDIR ret;
+}
+
+/*
+ * Setup addr assuming that A is an index into
+ * an array of 32byte objects, SINDEX contains
+ * the base address of that array, and DINDEX
+ * contains the base address of the location
+ * to store the indexed address.
+ */
+set_32byte_addr:
+ shr ARG_2, 3, A;
+ shl A, 5;
+/*
+ * Setup addr assuming that A + (ARG_1 * 256) is an
+ * index into an array of 1byte objects, SINDEX contains
+ * the base address of that array, and DINDEX contains
+ * the base address of the location to store the computed
+ * address.
+ */
+set_1byte_addr:
+ add DINDIR, A, SINDIR;
+ mov A, ARG_2;
+ adc DINDIR, A, SINDIR;
+ clr A;
+ adc DINDIR, A, SINDIR;
+ adc DINDIR, A, SINDIR ret;
+
+/*
+ * Either post or fetch and SCB from host memory based on the
+ * DIRECTION bit in DMAPARAMS. The host SCB index is in SINDEX.
+ */
+dma_scb:
+ mov A, SINDEX;
+ if ((p->features & AHC_CMD_CHAN) != 0) {
+ mvi DINDEX, CCHADDR;
+ mvi HSCB_ADDR call set_32byte_addr;
+ mov CCSCBPTR, SCBPTR;
+ mvi CCHCNT, 32;
+ test DMAPARAMS, DIRECTION jz dma_scb_tohost;
+ mvi CCSCBCTL, CCARREN|CCSCBEN|CCSCBDIR|CCSCBRESET;
+ cmp CCSCBCTL, CCSCBDONE|ARRDONE|CCARREN|CCSCBEN|CCSCBDIR jne .;
+ jmp dma_scb_finish;
+dma_scb_tohost:
+ if ((p->features & AHC_ULTRA2) == 0) {
+ mvi CCSCBCTL, CCSCBRESET;
+ bmov CCSCBRAM, SCB_CONTROL, 32;
+ or CCSCBCTL, CCSCBEN|CCSCBRESET;
+ test CCSCBCTL, CCSCBDONE jz .;
+ }
+ if ((p->features & AHC_ULTRA2) != 0) {
+ if ((p->bugs & AHC_BUG_SCBCHAN_UPLOAD) != 0) {
+ mvi CCSCBCTL, CCARREN|CCSCBRESET;
+ cmp CCSCBCTL, ARRDONE|CCARREN jne .;
+ mvi CCHCNT, 32;
+ mvi CCSCBCTL, CCSCBEN|CCSCBRESET;
+ cmp CCSCBCTL, CCSCBDONE|CCSCBEN jne .;
+ } else {
+ mvi CCSCBCTL, CCARREN|CCSCBEN|CCSCBRESET;
+ cmp CCSCBCTL, CCSCBDONE|ARRDONE|CCARREN|CCSCBEN jne .;
+ }
+ }
+dma_scb_finish:
+ clr CCSCBCTL;
+ test CCSCBCTL, CCARREN|CCSCBEN jnz .;
+ ret;
+ }
+ if ((p->features & AHC_CMD_CHAN) == 0) {
+ mvi DINDEX, HADDR;
+ mvi HSCB_ADDR call set_32byte_addr;
+ mvi HCNT[0], 32;
+ clr HCNT[1];
+ clr HCNT[2];
+ mov DFCNTRL, DMAPARAMS;
+ test DMAPARAMS, DIRECTION jnz dma_scb_fromhost;
+ /* Fill it with the SCB data */
+copy_scb_tofifo:
+ mvi SINDEX, SCB_CONTROL;
+ add A, 32, SINDEX;
+copy_scb_tofifo_loop:
+ mov DFDAT,SINDIR;
+ mov DFDAT,SINDIR;
+ mov DFDAT,SINDIR;
+ mov DFDAT,SINDIR;
+ mov DFDAT,SINDIR;
+ mov DFDAT,SINDIR;
+ mov DFDAT,SINDIR;
+ mov DFDAT,SINDIR;
+ cmp SINDEX, A jne copy_scb_tofifo_loop;
+ or DFCNTRL, HDMAEN|FIFOFLUSH;
+ jmp dma_finish;
+dma_scb_fromhost:
+ mvi DINDEX, SCB_CONTROL;
+ if ((p->bugs & AHC_BUG_PCI_2_1_RETRY) != 0) {
+ /*
+ * Set the A to -24. It it hits 0, then we let
+ * our code fall through to dfdat_in_8 to complete
+ * the last of the copy.
+ *
+ * Also, things happen 8 bytes at a time in this
+ * case, so we may need to drain the fifo at most
+ * 3 times to keep things flowing
+ */
+ mvi A, -24;
+dma_scb_hang_fifo:
+ /* Wait for the first bit of data to hit the fifo */
+ test DFSTATUS, FIFOEMP jnz .;
+dma_scb_hang_wait:
+ /* OK, now they've started to transfer into the fifo,
+ * so wait for them to stop trying to transfer any
+ * more data.
+ */
+ test DFSTATUS, MREQPEND jnz .;
+ /*
+ * OK, they started, then they stopped, now see if they
+ * managed to complete the job before stopping. Try
+ * it multiple times to give the chip a few cycles to
+ * set the flag if it did complete.
+ */
+ test DFSTATUS, HDONE jnz dma_scb_hang_dma_done;
+ test DFSTATUS, HDONE jnz dma_scb_hang_dma_done;
+ test DFSTATUS, HDONE jnz dma_scb_hang_dma_done;
+ /*
+ * Too bad, the chip didn't complete the DMA, but there
+ * aren't any more memory requests pending, so that
+ * means it stopped part way through and hung. That's
+ * our bug, so now we drain what data there is in the
+ * fifo in order to get things going again.
+ */
+dma_scb_hang_empty_fifo:
+ call dfdat_in_8;
+ add A, 8;
+ add SINDEX, A, HCNT;
+ /*
+ * If there are another 8 bytes of data waiting in the
+ * fifo, then the carry bit will be set as a result
+ * of the above add command (unless A is non-negative,
+ * in which case the carry bit won't be set).
+ */
+ jc dma_scb_hang_empty_fifo;
+ /*
+ * We've emptied the fifo now, but we wouldn't have got
+ * here if the memory transfer hadn't stopped part way
+ * through, so go back up to the beginning of the
+ * loop and start over. When it succeeds in getting
+ * all the data down, HDONE will be set and we'll
+ * jump to the code just below here.
+ */
+ jmp dma_scb_hang_fifo;
+dma_scb_hang_dma_done:
+ and DFCNTRL, ~HDMAEN;
+ test DFCNTRL, HDMAEN jnz .;
+ call dfdat_in_8;
+ add A, 8;
+ cmp A, 8 jne . - 2;
+ ret;
+ } else {
+ call dma_finish;
+ call dfdat_in_8;
+ call dfdat_in_8;
+ call dfdat_in_8;
+ }
+dfdat_in_8:
+ mov DINDIR,DFDAT;
+dfdat_in_7:
+ mov DINDIR,DFDAT;
+ mov DINDIR,DFDAT;
+ mov DINDIR,DFDAT;
+ mov DINDIR,DFDAT;
+ mov DINDIR,DFDAT;
+ mov DINDIR,DFDAT;
+ mov DINDIR,DFDAT ret;
+ }
+
+
+/*
+ * Wait for DMA from host memory to data FIFO to complete, then disable
+ * DMA and wait for it to acknowledge that it's off.
+ */
+if ((p->features & AHC_CMD_CHAN) == 0) {
+dma_finish:
+ test DFSTATUS,HDONE jz dma_finish;
+ /* Turn off DMA */
+ and DFCNTRL, ~HDMAEN;
+ test DFCNTRL, HDMAEN jnz .;
+ ret;
+}
+
+add_scb_to_free_list:
+ if ((p->flags & AHC_PAGESCBS) != 0) {
+ mov SCB_NEXT, FREE_SCBH;
+ mov FREE_SCBH, SCBPTR;
+ }
+ mvi SCB_TAG, SCB_LIST_NULL ret;
+
+if ((p->flags & AHC_PAGESCBS) != 0) {
+get_free_or_disc_scb:
+ cmp FREE_SCBH, SCB_LIST_NULL jne dequeue_free_scb;
+ cmp DISCONNECTED_SCBH, SCB_LIST_NULL jne dequeue_disc_scb;
+return_error:
+ mvi SINDEX, SCB_LIST_NULL ret;
+dequeue_disc_scb:
+ mov SCBPTR, DISCONNECTED_SCBH;
+dma_up_scb:
+ mvi DMAPARAMS, FIFORESET;
+ mov SCB_TAG call dma_scb;
+unlink_disc_scb:
+ mov DISCONNECTED_SCBH, SCB_NEXT ret;
+dequeue_free_scb:
+ mov SCBPTR, FREE_SCBH;
+ mov FREE_SCBH, SCB_NEXT ret;
+}
+
+add_scb_to_disc_list:
+/*
+ * Link this SCB into the DISCONNECTED list. This list holds the
+ * candidates for paging out an SCB if one is needed for a new command.
+ * Modifying the disconnected list is a critical(pause dissabled) section.
+ */
+ mov SCB_NEXT, DISCONNECTED_SCBH;
+ mov DISCONNECTED_SCBH, SCBPTR ret;