aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/isci/firmware/create_fw.h
diff options
context:
space:
mode:
authorDan Williams <dan.j.williams@intel.com>2011-03-11 10:43:57 -0800
committerDan Williams <dan.j.williams@intel.com>2011-07-03 03:55:31 -0700
commit4711ba10b13891edf228944a9d0a21dfe7fe90f0 (patch)
treec846eb029eb2bc827a614df963b00aa412b95956 /drivers/scsi/isci/firmware/create_fw.h
parent2e8320f751030a12efc3e64ee857bfa4647f81fe (diff)
isci: fix oem parameter initialization and mode detection
1/ Since commit 858d4aa7 "isci: Move firmware loading to per PCI device" we have been silently falling back to built-in defaults for the parameter settings by skipping the call to scic_oem_parameters_set(). 2/ The afe parameters from the firmware were not being honored 3/ The latest oem parameter definition flips the mode_type values which are now 0: for APC 1: for MPC. For APC we need to make sure all the phys default to the same address otherwise strict_wide_ports will cause duplicate domains. 4/ Fix up the driver announcement to indicate the source of the parameters. 5/ Fix up the sas addresses to be unique per controller (in the fallback case) Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/scsi/isci/firmware/create_fw.h')
-rw-r--r--drivers/scsi/isci/firmware/create_fw.h39
1 files changed, 24 insertions, 15 deletions
diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h
index 788a8de0c2b..9f9afbd97d6 100644
--- a/drivers/scsi/isci/firmware/create_fw.h
+++ b/drivers/scsi/isci/firmware/create_fw.h
@@ -25,14 +25,37 @@ static const int num_elements = 2;
* if there is a port/phy on which you do not wish to override the default
* values, use the value assigned to UNINIT_PARAM (255).
*/
+
/* discovery mode type (port auto config mode by default ) */
+
+/*
+ * if there is a port/phy on which you do not wish to override the default
+ * values, use the value "0000000000000000". SAS address of zero's is
+ * considered invalid and will not be used.
+ */
#ifdef MPC
static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
{1, 2, 4, 8} };
+static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
+ 0x5FCFFFFFF0000002ULL,
+ 0x5FCFFFFFF0000003ULL,
+ 0x5FCFFFFFF0000004ULL },
+ { 0x5FCFFFFFF0000005ULL,
+ 0x5FCFFFFFF0000006ULL,
+ 0x5FCFFFFFF0000007ULL,
+ 0x5FCFFFFFF0000008ULL } };
#else /* APC (default) */
static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
static const __u8 phy_mask[2][4];
+static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL },
+ { 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL } };
#endif
/* Maximum number of concurrent device spin up */
@@ -47,22 +70,8 @@ static const unsigned int afe_tx_amp_control1 = 0x000e7c03;
static const unsigned int afe_tx_amp_control2 = 0x000e7c03;
static const unsigned int afe_tx_amp_control3 = 0x000e7c03;
-/*
- * if there is a port/phy on which you do not wish to override the default
- * values, use the value "0000000000000000". SAS address of zero's is
- * considered invalid and will not be used.
- */
-static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000000ULL,
- 0x5FCFFFFFF1000000ULL,
- 0x5FCFFFFFF2000000ULL,
- 0x5FCFFFFFF3000000ULL },
- { 0x5FCFFFFFF4000000ULL,
- 0x5FCFFFFFF5000000ULL,
- 0x5FCFFFFFF6000000ULL,
- 0x5FCFFFFFF7000000ULL } };
-
static const char blob_name[] = "isci_firmware.bin";
static const char sig[] = "ISCUOEMB";
-static const unsigned char version = 1;
+static const unsigned char version = 0x10;
#endif