diff options
| author | Matthew Wilcox <matthew@wil.cx> | 2005-05-20 19:15:43 +0100 |
|---|---|---|
| committer | James Bottomley <jejb@mulgrave.(none)> | 2005-05-26 08:41:14 -0500 |
| commit | 53222b906903fd861dc24ebccfa07ee125941313 (patch) | |
| tree | a39e9a20718d01b67e89c14baa0e11411643c993 /drivers/scsi/sym53c8xx_2/sym_glue.h | |
| parent | 7c00ffa314bf0fb0e23858bbebad33b48b6abbb9 (diff) | |
[SCSI] sym2 version 2.2.1
sym2 version 2.2.1:
- Fix MMIO BAR detection (Thanks to Bob Picco)
- Fix odd-sized transfers with a wide bus (Thanks to Larry Stephens)
- Write posting fixes (Thanks to Thibaut Varene)
- Change one of the GFP_KERNEL allocations back into a GFP_ATOMIC
- Make CCB_BA() return a script-endian address
- Move range checks and disabling of devices from the queuecommand path
to slave_alloc()
- Remove a warning in sym_setup_cdb()
- Keep a pointer to the scsi_target instead of the scsi_dev in the tcb
- Remove a check for the upper layers passing an oversized cmd
- Replace CAM_REQ_ constants with the Linux DID_ constants
- Replace CAM_DIR_ constants with the Linux DMA_ constants
- Inline sym_read_parisc_pdc() on non-parisc systems
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/sym53c8xx_2/sym_glue.h')
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_glue.h | 27 |
1 files changed, 0 insertions, 27 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h index e943f167fb5..d3d52f14d7c 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.h +++ b/drivers/scsi/sym53c8xx_2/sym_glue.h @@ -142,33 +142,6 @@ #define scr_to_cpu(dw) le32_to_cpu(dw) /* - * Remap some status field values. - */ -#define CAM_REQ_CMP DID_OK -#define CAM_SEL_TIMEOUT DID_NO_CONNECT -#define CAM_CMD_TIMEOUT DID_TIME_OUT -#define CAM_REQ_ABORTED DID_ABORT -#define CAM_UNCOR_PARITY DID_PARITY -#define CAM_SCSI_BUS_RESET DID_RESET -#define CAM_REQUEUE_REQ DID_SOFT_ERROR -#define CAM_UNEXP_BUSFREE DID_ERROR -#define CAM_SCSI_BUSY DID_BUS_BUSY - -#define CAM_DEV_NOT_THERE DID_NO_CONNECT -#define CAM_REQ_INVALID DID_ERROR -#define CAM_REQ_TOO_BIG DID_ERROR - -#define CAM_RESRC_UNAVAIL DID_ERROR - -/* - * Remap data direction values. - */ -#define CAM_DIR_NONE DMA_NONE -#define CAM_DIR_IN DMA_FROM_DEVICE -#define CAM_DIR_OUT DMA_TO_DEVICE -#define CAM_DIR_UNKNOWN DMA_BIDIRECTIONAL - -/* * These ones are used as return code from * error recovery handlers under Linux. */ |