aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/ufs
diff options
context:
space:
mode:
authorSantosh Yaraganavi <santoshsy@gmail.com>2012-02-29 12:11:50 +0530
committerJames Bottomley <JBottomley@Parallels.com>2012-03-27 08:26:28 +0100
commit7a3e97b0dc4bbac2ba7803564ab0057722689921 (patch)
treeace32dfcc94a0994b123cc1e3b3967eccd9a0ef3 /drivers/scsi/ufs
parent0bd7f84211ad244607e28e9e8fbad0244d54e6f5 (diff)
[SCSI] ufshcd: UFS Host controller driver
This patch adds support for Universal Flash Storage(UFS) host controllers. The UFS host controller driver includes host controller initialization method. The Initialization process involves following steps: - Initiate UFS Host Controller initialization process by writing to Host controller enable register - Configure UFS Host controller registers with host memory space datastructure offsets. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests - Enable required interrupts - Configure interrupt aggregation [jejb: fix warnings in 32 bit compile] Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Reviewed-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Vishak G <vishak.g@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/ufs')
-rw-r--r--drivers/scsi/ufs/Kconfig49
-rw-r--r--drivers/scsi/ufs/Makefile2
-rw-r--r--drivers/scsi/ufs/ufs.h207
-rw-r--r--drivers/scsi/ufs/ufshcd.c1978
-rw-r--r--drivers/scsi/ufs/ufshci.h376
5 files changed, 2612 insertions, 0 deletions
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
new file mode 100644
index 00000000000..8f27f9d6f91
--- /dev/null
+++ b/drivers/scsi/ufs/Kconfig
@@ -0,0 +1,49 @@
+#
+# Kernel configuration file for the UFS Host Controller
+#
+# This code is based on drivers/scsi/ufs/Kconfig
+# Copyright (C) 2011 Samsung Samsung India Software Operations
+#
+# Santosh Yaraganavi <santosh.sy@samsung.com>
+# Vinayak Holikatti <h.vinayak@samsung.com>
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# NO WARRANTY
+# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+# solely responsible for determining the appropriateness of using and
+# distributing the Program and assumes all risks associated with its
+# exercise of rights under this Agreement, including but not limited to
+# the risks and costs of program errors, damage to or loss of data,
+# programs or equipment, and unavailability or interruption of operations.
+
+# DISCLAIMER OF LIABILITY
+# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+# USA.
+
+config SCSI_UFSHCD
+ tristate "Universal Flash Storage host controller driver"
+ depends on PCI && SCSI
+ ---help---
+ This is a generic driver which supports PCIe UFS Host controllers.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
new file mode 100644
index 00000000000..adf7895a6a9
--- /dev/null
+++ b/drivers/scsi/ufs/Makefile
@@ -0,0 +1,2 @@
+# UFSHCD makefile
+obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
new file mode 100644
index 00000000000..b207529f8d5
--- /dev/null
+++ b/drivers/scsi/ufs/ufs.h
@@ -0,0 +1,207 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufs.h
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#ifndef _UFS_H
+#define _UFS_H
+
+#define MAX_CDB_SIZE 16
+
+#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
+ ((byte3 << 24) | (byte2 << 16) |\
+ (byte1 << 8) | (byte0))
+
+/*
+ * UFS Protocol Information Unit related definitions
+ */
+
+/* Task management functions */
+enum {
+ UFS_ABORT_TASK = 0x01,
+ UFS_ABORT_TASK_SET = 0x02,
+ UFS_CLEAR_TASK_SET = 0x04,
+ UFS_LOGICAL_RESET = 0x08,
+ UFS_QUERY_TASK = 0x80,
+ UFS_QUERY_TASK_SET = 0x81,
+};
+
+/* UTP UPIU Transaction Codes Initiator to Target */
+enum {
+ UPIU_TRANSACTION_NOP_OUT = 0x00,
+ UPIU_TRANSACTION_COMMAND = 0x01,
+ UPIU_TRANSACTION_DATA_OUT = 0x02,
+ UPIU_TRANSACTION_TASK_REQ = 0x04,
+ UPIU_TRANSACTION_QUERY_REQ = 0x26,
+};
+
+/* UTP UPIU Transaction Codes Target to Initiator */
+enum {
+ UPIU_TRANSACTION_NOP_IN = 0x20,
+ UPIU_TRANSACTION_RESPONSE = 0x21,
+ UPIU_TRANSACTION_DATA_IN = 0x22,
+ UPIU_TRANSACTION_TASK_RSP = 0x24,
+ UPIU_TRANSACTION_READY_XFER = 0x31,
+ UPIU_TRANSACTION_QUERY_RSP = 0x36,
+};
+
+/* UPIU Read/Write flags */
+enum {
+ UPIU_CMD_FLAGS_NONE = 0x00,
+ UPIU_CMD_FLAGS_WRITE = 0x20,
+ UPIU_CMD_FLAGS_READ = 0x40,
+};
+
+/* UPIU Task Attributes */
+enum {
+ UPIU_TASK_ATTR_SIMPLE = 0x00,
+ UPIU_TASK_ATTR_ORDERED = 0x01,
+ UPIU_TASK_ATTR_HEADQ = 0x02,
+ UPIU_TASK_ATTR_ACA = 0x03,
+};
+
+/* UTP QUERY Transaction Specific Fields OpCode */
+enum {
+ UPIU_QUERY_OPCODE_NOP = 0x0,
+ UPIU_QUERY_OPCODE_READ_DESC = 0x1,
+ UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
+ UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
+ UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
+ UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
+ UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
+ UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
+ UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
+};
+
+/* UTP Transfer Request Command Type (CT) */
+enum {
+ UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
+ UPIU_COMMAND_SET_TYPE_UFS = 0x1,
+ UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
+};
+
+enum {
+ MASK_SCSI_STATUS = 0xFF,
+ MASK_TASK_RESPONSE = 0xFF00,
+ MASK_RSP_UPIU_RESULT = 0xFFFF,
+};
+
+/* Task management service response */
+enum {
+ UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
+ UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
+ UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08,
+ UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
+ UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
+};
+/**
+ * struct utp_upiu_header - UPIU header structure
+ * @dword_0: UPIU header DW-0
+ * @dword_1: UPIU header DW-1
+ * @dword_2: UPIU header DW-2
+ */
+struct utp_upiu_header {
+ u32 dword_0;
+ u32 dword_1;
+ u32 dword_2;
+};
+
+/**
+ * struct utp_upiu_cmd - Command UPIU structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @data_transfer_len: Data Transfer Length DW-3
+ * @cdb: Command Descriptor Block CDB DW-4 to DW-7
+ */
+struct utp_upiu_cmd {
+ struct utp_upiu_header header;
+ u32 exp_data_transfer_len;
+ u8 cdb[MAX_CDB_SIZE];
+};
+
+/**
+ * struct utp_upiu_rsp - Response UPIU structure
+ * @header: UPIU header DW-0 to DW-2
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @sense_data: Sense data field DW-8 to DW-12
+ */
+struct utp_upiu_rsp {
+ struct utp_upiu_header header;
+ u32 residual_transfer_count;
+ u32 reserved[4];
+ u16 sense_data_len;
+ u8 sense_data[18];
+};
+
+/**
+ * struct utp_upiu_task_req - Task request UPIU structure
+ * @header - UPIU header structure DW0 to DW-2
+ * @input_param1: Input parameter 1 DW-3
+ * @input_param2: Input parameter 2 DW-4
+ * @input_param3: Input parameter 3 DW-5
+ * @reserved: Reserved double words DW-6 to DW-7
+ */
+struct utp_upiu_task_req {
+ struct utp_upiu_header header;
+ u32 input_param1;
+ u32 input_param2;
+ u32 input_param3;
+ u32 reserved[2];
+};
+
+/**
+ * struct utp_upiu_task_rsp - Task Management Response UPIU structure
+ * @header: UPIU header structure DW0-DW-2
+ * @output_param1: Ouput parameter 1 DW3
+ * @output_param2: Output parameter 2 DW4
+ * @reserved: Reserved double words DW-5 to DW-7
+ */
+struct utp_upiu_task_rsp {
+ struct utp_upiu_header header;
+ u32 output_param1;
+ u32 output_param2;
+ u32 reserved[3];
+};
+
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
new file mode 100644
index 00000000000..52b96e8bf92
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -0,0 +1,1978 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd.c
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+
+#include "ufs.h"
+#include "ufshci.h"
+
+#define UFSHCD "ufshcd"
+#define UFSHCD_DRIVER_VERSION "0.1"
+
+enum {
+ UFSHCD_MAX_CHANNEL = 0,
+ UFSHCD_MAX_ID = 1,
+ UFSHCD_MAX_LUNS = 8,
+ UFSHCD_CMD_PER_LUN = 32,
+ UFSHCD_CAN_QUEUE = 32,
+};
+
+/* UFSHCD states */
+enum {
+ UFSHCD_STATE_OPERATIONAL,
+ UFSHCD_STATE_RESET,
+ UFSHCD_STATE_ERROR,
+};
+
+/* Interrupt configuration options */
+enum {
+ UFSHCD_INT_DISABLE,
+ UFSHCD_INT_ENABLE,
+ UFSHCD_INT_CLEAR,
+};
+
+/* Interrupt aggregation options */
+enum {
+ INT_AGGR_RESET,
+ INT_AGGR_CONFIG,
+};
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @result: UIC command result
+ */
+struct uic_command {
+ u32 command;
+ u32 argument1;
+ u32 argument2;
+ u32 argument3;
+ int cmd_active;
+ int result;
+};
+
+/**
+ * struct ufs_hba - per adapter private structure
+ * @mmio_base: UFSHCI base register address
+ * @ucdl_base_addr: UFS Command Descriptor base address
+ * @utrdl_base_addr: UTP Transfer Request Descriptor base address
+ * @utmrdl_base_addr: UTP Task Management Descriptor base address
+ * @ucdl_dma_addr: UFS Command Descriptor DMA address
+ * @utrdl_dma_addr: UTRDL DMA address
+ * @utmrdl_dma_addr: UTMRDL DMA address
+ * @host: Scsi_Host instance of the driver
+ * @pdev: PCI device handle
+ * @lrb: local reference block
+ * @outstanding_tasks: Bits representing outstanding task requests
+ * @outstanding_reqs: Bits representing outstanding transfer requests
+ * @capabilities: UFS Controller Capabilities
+ * @nutrs: Transfer Request Queue depth supported by controller
+ * @nutmrs: Task Management Queue depth supported by controller
+ * @active_uic_cmd: handle of active UIC command
+ * @ufshcd_tm_wait_queue: wait queue for task management
+ * @tm_condition: condition variable for task management
+ * @ufshcd_state: UFSHCD states
+ * @int_enable_mask: Interrupt Mask Bits
+ * @uic_workq: Work queue for UIC completion handling
+ * @feh_workq: Work queue for fatal controller error handling
+ * @errors: HBA errors
+ */
+struct ufs_hba {
+ void __iomem *mmio_base;
+
+ /* Virtual memory reference */
+ struct utp_transfer_cmd_desc *ucdl_base_addr;
+ struct utp_transfer_req_desc *utrdl_base_addr;
+ struct utp_task_req_desc *utmrdl_base_addr;
+
+ /* DMA memory reference */
+ dma_addr_t ucdl_dma_addr;
+ dma_addr_t utrdl_dma_addr;
+ dma_addr_t utmrdl_dma_addr;
+
+ struct Scsi_Host *host;
+ struct pci_dev *pdev;
+
+ struct ufshcd_lrb *lrb;
+
+ unsigned long outstanding_tasks;
+ unsigned long outstanding_reqs;
+
+ u32 capabilities;
+ int nutrs;
+ int nutmrs;
+ u32 ufs_version;
+
+ struct uic_command active_uic_cmd;
+ wait_queue_head_t ufshcd_tm_wait_queue;
+ unsigned long tm_condition;
+
+ u32 ufshcd_state;
+ u32 int_enable_mask;
+
+ /* Work Queues */
+ struct work_struct uic_workq;
+ struct work_struct feh_workq;
+
+ /* HBA Errors */
+ u32 errors;
+};
+
+/**
+ * struct ufshcd_lrb - local reference block
+ * @utr_descriptor_ptr: UTRD address of the command
+ * @ucd_cmd_ptr: UCD address of the command
+ * @ucd_rsp_ptr: Response UPIU address for this command
+ * @ucd_prdt_ptr: PRDT address of the command
+ * @cmd: pointer to SCSI command
+ * @sense_buffer: pointer to sense buffer address of the SCSI command
+ * @sense_bufflen: Length of the sense buffer
+ * @scsi_status: SCSI status of the command
+ * @command_type: SCSI, UFS, Query.
+ * @task_tag: Task tag of the command
+ * @lun: LUN of the command
+ */
+struct ufshcd_lrb {
+ struct utp_transfer_req_desc *utr_descriptor_ptr;
+ struct utp_upiu_cmd *ucd_cmd_ptr;
+ struct utp_upiu_rsp *ucd_rsp_ptr;
+ struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+ struct scsi_cmnd *cmd;
+ u8 *sense_buffer;
+ unsigned int sense_bufflen;
+ int scsi_status;
+
+ int command_type;
+ int task_tag;
+ unsigned int lun;
+};
+
+/**
+ * ufshcd_get_ufs_version - Get the UFS version supported by the HBA
+ * @hba - Pointer to adapter instance
+ *
+ * Returns UFSHCI version supported by the controller
+ */
+static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba)
+{
+ return readl(hba->mmio_base + REG_UFS_VERSION);
+}
+
+/**
+ * ufshcd_is_device_present - Check if any device connected to
+ * the host controller
+ * @reg_hcs - host controller status register value
+ *
+ * Returns 0 if device present, non-zero if no device detected
+ */
+static inline int ufshcd_is_device_present(u32 reg_hcs)
+{
+ return (DEVICE_PRESENT & reg_hcs) ? 0 : -1;
+}
+
+/**
+ * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status
+ * @lrb: pointer to local command reference block
+ *
+ * This function is used to get the OCS field from UTRD
+ * Returns the OCS field in the UTRD
+ */
+static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp)
+{
+ return lrbp->utr_descriptor_ptr->header.dword_2 & MASK_OCS;
+}
+
+/**
+ * ufshcd_get_tmr_ocs - Get the UTMRD Overall Command Status
+ * @task_req_descp: pointer to utp_task_req_desc structure
+ *
+ * This function is used to get the OCS field from UTMRD
+ * Returns the OCS field in the UTMRD
+ */
+static inline int
+ufshcd_get_tmr_ocs(struct utp_task_req_desc *task_req_descp)
+{
+ return task_req_descp->header.dword_2 & MASK_OCS;
+}
+
+/**
+ * ufshcd_get_tm_free_slot - get a free slot for task management request
+ * @hba: per adapter instance
+ *
+ * Returns maximum number of task management request slots in case of
+ * task management queue full or returns the free slot number
+ */
+static inline int ufshcd_get_tm_free_slot(struct ufs_hba *hba)
+{
+ return find_first_zero_bit(&hba->outstanding_tasks, hba->nutmrs);
+}
+
+/**
+ * ufshcd_utrl_clear - Clear a bit in UTRLCLR register
+ * @hba: per adapter instance
+ * @pos: position of the bit to be cleared
+ */
+static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos)
+{
+ writel(~(1 << pos),
+ (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_CLEAR));
+}
+
+/**
+ * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY
+ * @reg: Register value of host controller status
+ *
+ * Returns integer, 0 on Success and positive value if failed
+ */
+static inline int ufshcd_get_lists_status(u32 reg)
+{
+ /*
+ * The mask 0xFF is for the following HCS register bits
+ * Bit Description
+ * 0 Device Present
+ * 1 UTRLRDY
+ * 2 UTMRLRDY
+ * 3 UCRDY
+ * 4 HEI
+ * 5 DEI
+ * 6-7 reserved
+ */
+ return (((reg) & (0xFF)) >> 1) ^ (0x07);
+}
+
+/**
+ * ufshcd_get_uic_cmd_result - Get the UIC command result
+ * @hba: Pointer to adapter instance
+ *
+ * This function gets the result of UIC command completion
+ * Returns 0 on success, non zero value on error
+ */
+static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba)
+{
+ return readl(hba->mmio_base + REG_UIC_COMMAND_ARG_2) &
+ MASK_UIC_COMMAND_RESULT;
+}
+
+/**
+ * ufshcd_free_hba_memory - Free allocated memory for LRB, request
+ * and task lists
+ * @hba: Pointer to adapter instance
+ */
+static inline void ufshcd_free_hba_memory(struct ufs_hba *hba)
+{
+ size_t utmrdl_size, utrdl_size, ucdl_size;
+
+ kfree(hba->lrb);
+
+ if (hba->utmrdl_base_addr) {
+ utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
+ dma_free_coherent(&hba->pdev->dev, utmrdl_size,
+ hba->utmrdl_base_addr, hba->utmrdl_dma_addr);
+ }
+
+ if (hba->utrdl_base_addr) {
+ utrdl_size =
+ (sizeof(struct utp_transfer_req_desc) * hba->nutrs);
+ dma_free_coherent(&hba->pdev->dev, utrdl_size,
+ hba->utrdl_base_addr, hba->utrdl_dma_addr);
+ }
+
+ if (hba->ucdl_base_addr) {
+ ucdl_size =
+ (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
+ dma_free_coherent(&hba->pdev->dev, ucdl_size,
+ hba->ucdl_base_addr, hba->ucdl_dma_addr);
+ }
+}
+
+/**
+ * ufshcd_is_valid_req_rsp - checks if controller TR response is valid
+ * @ucd_rsp_ptr: pointer to response UPIU
+ *
+ * This function checks the response UPIU for valid transaction type in
+ * response field
+ * Returns 0 on success, non-zero on failure
+ */
+static inline int
+ufshcd_is_valid_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr)
+{
+ return ((be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24) ==
+ UPIU_TRANSACTION_RESPONSE) ? 0 : DID_ERROR << 16;
+}
+
+/**
+ * ufshcd_get_rsp_upiu_result - Get the result from response UPIU
+ * @ucd_rsp_ptr: pointer to response UPIU
+ *
+ * This function gets the response status and scsi_status from response UPIU
+ * Returns the response result code.
+ */
+static inline int
+ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr)
+{
+ return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT;
+}
+
+/**
+ * ufshcd_config_int_aggr - Configure interrupt aggregation values.
+ * Currently there is no use case where we want to configure
+ * interrupt aggregation dynamically. So to configure interrupt
+ * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and
+ * INT_AGGR_TIMEOUT_VALUE are used.
+ * @hba: per adapter instance
+ * @option: Interrupt aggregation option
+ */
+static inline void
+ufshcd_config_int_aggr(struct ufs_hba *hba, int option)
+{
+ switch (option) {
+ case INT_AGGR_RESET:
+ writel((INT_AGGR_ENABLE |
+ INT_AGGR_COUNTER_AND_TIMER_RESET),
+ (hba->mmio_base +
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL));
+ break;
+ case INT_AGGR_CONFIG:
+ writel((INT_AGGR_ENABLE |
+ INT_AGGR_PARAM_WRITE |
+ INT_AGGR_COUNTER_THRESHOLD_VALUE |
+ INT_AGGR_TIMEOUT_VALUE),
+ (hba->mmio_base +
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL));
+ break;
+ }
+}
+
+/**
+ * ufshcd_enable_run_stop_reg - Enable run-stop registers,
+ * When run-stop registers are set to 1, it indicates the
+ * host controller that it can process the requests
+ * @hba: per adapter instance
+ */
+static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
+{
+ writel(UTP_TASK_REQ_LIST_RUN_STOP_BIT,
+ (hba->mmio_base +
+ REG_UTP_TASK_REQ_LIST_RUN_STOP));
+ writel(UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT,
+ (hba->mmio_base +
+ REG_UTP_TRANSFER_REQ_LIST_RUN_STOP));
+}
+
+/**
+ * ufshcd_hba_stop - Send controller to reset state
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_stop(struct ufs_hba *hba)
+{
+ writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
+}
+
+/**
+ * ufshcd_hba_start - Start controller initialization sequence
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_start(struct ufs_hba *hba)
+{
+ writel(CONTROLLER_ENABLE , (hba->mmio_base + REG_CONTROLLER_ENABLE));
+}
+
+/**
+ * ufshcd_is_hba_active - Get controller state
+ * @hba: per adapter instance
+ *
+ * Returns zero if controller is active, 1 otherwise
+ */
+static inline int ufshcd_is_hba_active(struct ufs_hba *hba)
+{
+ return (readl(hba->mmio_base + REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1;
+}
+
+/**
+ * ufshcd_send_command - Send SCSI or device management commands
+ * @hba: per adapter instance
+ * @task_tag: Task tag of the command
+ */
+static inline
+void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
+{
+ __set_bit(task_tag, &hba->outstanding_reqs);
+ writel((1 << task_tag),
+ (hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL));
+}
+
+/**
+ * ufshcd_copy_sense_data - Copy sense data in case of check condition
+ * @lrb - pointer to local reference block
+ */
+static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
+{
+ int len;
+ if (lrbp->sense_buffer) {
+ len = be16_to_cpu(lrbp->ucd_rsp_ptr->sense_data_len);
+ memcpy(lrbp->sense_buffer,
+ lrbp->ucd_rsp_ptr->sense_data,
+ min_t(int, len, SCSI_SENSE_BUFFERSIZE));
+ }
+}
+
+/**
+ * ufshcd_hba_capabilities - Read controller capabilities
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_capabilities(struct ufs_hba *hba)
+{
+ hba->capabilities =
+ readl(hba->mmio_base + REG_CONTROLLER_CAPABILITIES);
+
+ /* nutrs and nutmrs are 0 based values */
+ hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1;
+ hba->nutmrs =
+ ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1;
+}
+
+/**
+ * ufshcd_send_uic_command - Send UIC commands to unipro layers
+ * @hba: per adapter instance
+ * @uic_command: UIC command
+ */
+static inline void
+ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd)
+{
+ /* Write Args */
+ writel(uic_cmnd->argument1,
+ (hba->mmio_base + REG_UIC_COMMAND_ARG_1));
+ writel(uic_cmnd->argument2,
+ (hba->mmio_base + REG_UIC_COMMAND_ARG_2));
+ writel(uic_cmnd->argument3,
+ (hba->mmio_base + REG_UIC_COMMAND_ARG_3));
+
+ /* Write UIC Cmd */
+ writel((uic_cmnd->command & COMMAND_OPCODE_MASK),
+ (hba->mmio_base + REG_UIC_COMMAND));
+}
+
+/**
+ * ufshcd_map_sg - Map scatter-gather list to prdt
+ * @lrbp - pointer to local reference block
+ *
+ * Returns 0 in case of success, non-zero value in case of failure
+ */
+static int ufshcd_map_sg(struct ufshcd_lrb *lrbp)
+{
+ struct ufshcd_sg_entry *prd_table;
+ struct scatterlist *sg;
+ struct scsi_cmnd *cmd;
+ int sg_segments;
+ int i;
+
+ cmd = lrbp->cmd;
+ sg_segments = scsi_dma_map(cmd);
+ if (sg_segments < 0)
+ return sg_segments;
+
+ if (sg_segments) {
+ lrbp->utr_descriptor_ptr->prd_table_length =
+ cpu_to_le16((u16) (sg_segments));
+
+ prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;
+
+ scsi_for_each_sg(cmd, sg, sg_segments, i) {
+ prd_table[i].size =
+ cpu_to_le32(((u32) sg_dma_len(sg))-1);
+ prd_table[i].base_addr =
+ cpu_to_le32(lower_32_bits(sg->dma_address));
+ prd_table[i].upper_addr =
+ cpu_to_le32(upper_32_bits(sg->dma_address));
+ }
+ } else {
+ lrbp->utr_descriptor_ptr->prd_table_length = 0;
+ }
+
+ return 0;
+}
+
+/**
+ * ufshcd_int_config - enable/disable interrupts
+ * @hba: per adapter instance
+ * @option: interrupt option
+ */
+static void ufshcd_int_config(struct ufs_hba *hba, u32 option)
+{
+ switch (option) {
+ case UFSHCD_INT_ENABLE:
+ writel(hba->int_enable_mask,
+ (hba->mmio_base + REG_INTERRUPT_ENABLE));
+ break;
+ case UFSHCD_INT_DISABLE:
+ if (hba->ufs_version == UFSHCI_VERSION_10)
+ writel(INTERRUPT_DISABLE_MASK_10,
+ (hba->mmio_base + REG_INTERRUPT_ENABLE));
+ else
+ writel(INTERRUPT_DISABLE_MASK_11,
+ (hba->mmio_base + REG_INTERRUPT_ENABLE));
+ break;
+ }
+}
+
+/**
+ * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU)
+ * @lrb - pointer to local reference block
+ */
+static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp)
+{
+ struct utp_transfer_req_desc *req_desc;
+ struct utp_upiu_cmd *ucd_cmd_ptr;
+ u32 data_direction;
+ u32 upiu_flags;
+
+ ucd_cmd_ptr = lrbp->ucd_cmd_ptr;
+ req_desc = lrbp->utr_descriptor_ptr;
+
+ switch (lrbp->command_type) {
+ case UTP_CMD_TYPE_SCSI:
+ if (lrbp->cmd->sc_data_direction == DMA_FROM_DEVICE) {
+ data_direction = UTP_DEVICE_TO_HOST;
+ upiu_flags = UPIU_CMD_FLAGS_READ;
+ } else if (lrbp->cmd->sc_data_direction == DMA_TO_DEVICE) {
+ data_direction = UTP_HOST_TO_DEVICE;
+ upiu_flags = UPIU_CMD_FLAGS_WRITE;
+ } else {
+ data_direction = UTP_NO_DATA_TRANSFER;
+ upiu_flags = UPIU_CMD_FLAGS_NONE;
+ }
+
+ /* Transfer request descriptor header fields */
+ req_desc->header.dword_0 =
+ cpu_to_le32(data_direction | UTP_SCSI_COMMAND);
+
+ /*
+ * assigning invalid value for command status. Controller
+ * updates OCS on command completion, with the command
+ * status
+ */
+ req_desc->header.dword_2 =
+ cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
+
+ /* command descriptor fields */
+ ucd_cmd_ptr->header.dword_0 =
+ cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND,
+ upiu_flags,
+ lrbp->lun,
+ lrbp->task_tag));
+ ucd_cmd_ptr->header.dword_1 =
+ cpu_to_be32(
+ UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI,
+ 0,
+ 0,
+ 0));
+
+ /* Total EHS length and Data segment length will be zero */
+ ucd_cmd_ptr->header.dword_2 = 0;
+
+ ucd_cmd_ptr->exp_data_transfer_len =
+ cpu_to_be32(lrbp->cmd->transfersize);
+
+ memcpy(ucd_cmd_ptr->cdb,
+ lrbp->cmd->cmnd,
+ (min_t(unsigned short,
+ lrbp->cmd->cmd_len,
+ MAX_CDB_SIZE)));
+ break;
+ case UTP_CMD_TYPE_DEV_MANAGE:
+ /* For query function implementation */
+ break;
+ case UTP_CMD_TYPE_UFS:
+ /* For UFS native command implementation */
+ break;
+ } /* end of switch */
+}
+
+/**
+ * ufshcd_queuecommand - main entry point for SCSI requests
+ * @cmd: command from SCSI Midlayer
+ * @done: call back function
+ *
+ * Returns 0 for success, non-zero in case of failure
+ */
+static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
+{
+ struct ufshcd_lrb *lrbp;
+ struct ufs_hba *hba;
+ unsigned long flags;
+ int tag;
+ int err = 0;
+
+ hba = shost_priv(host);
+
+ tag = cmd->request->tag;
+
+ if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) {
+ err = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+
+ lrbp = &hba->lrb[tag];
+
+ lrbp->cmd = cmd;
+ lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE;
+ lrbp->sense_buffer = cmd->sense_buffer;
+ lrbp->task_tag = tag;
+ lrbp->lun = cmd->device->lun;
+
+ lrbp->command_type = UTP_CMD_TYPE_SCSI;
+
+ /* form UPIU before issuing the command */
+ ufshcd_compose_upiu(lrbp);
+ err = ufshcd_map_sg(lrbp);
+ if (err)
+ goto out;
+
+ /* issue command to the controller */
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ ufshcd_send_command(hba, tag);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+out:
+ return err;
+}
+
+/**
+ * ufshcd_memory_alloc - allocate memory for host memory space data structures
+ * @hba: per adapter instance
+ *
+ * 1. Allocate DMA memory for Command Descriptor array
+ * Each command descriptor consist of Command UPIU, Response UPIU and PRDT
+ * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL).
+ * 3. Allocate DMA memory for UTP Task Management Request Descriptor List
+ * (UTMRDL)
+ * 4. Allocate memory for local reference block(lrb).
+ *
+ * Returns 0 for success, non-zero in case of failure
+ */
+static int ufshcd_memory_alloc(struct ufs_hba *hba)
+{
+ size_t utmrdl_size, utrdl_size, ucdl_size;
+
+ /* Allocate memory for UTP command descriptors */
+ ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
+ hba->ucdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ ucdl_size,
+ &hba->ucdl_dma_addr,
+ GFP_KERNEL);
+
+ /*
+ * UFSHCI requires UTP command descriptor to be 128 byte aligned.
+ * make sure hba->ucdl_dma_addr is aligned to PAGE_SIZE
+ * if hba->ucdl_dma_addr is aligned to PAGE_SIZE, then it will
+ * be aligned to 128 bytes as well
+ */
+ if (!hba->ucdl_base_addr ||
+ WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) {
+ dev_err(&hba->pdev->dev,
+ "Command Descriptor Memory allocation failed\n");
+ goto out;
+ }
+
+ /*
+ * Allocate memory for UTP Transfer descriptors
+ * UFSHCI requires 1024 byte alignment of UTRD
+ */
+ utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs);
+ hba->utrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ utrdl_size,
+ &hba->utrdl_dma_addr,
+ GFP_KERNEL);
+ if (!hba->utrdl_base_addr ||
+ WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) {
+ dev_err(&hba->pdev->dev,
+ "Transfer Descriptor Memory allocation failed\n");
+ goto out;
+ }
+
+ /*
+ * Allocate memory for UTP Task Management descriptors
+ * UFSHCI requires 1024 byte alignment of UTMRD
+ */
+ utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
+ hba->utmrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ utmrdl_size,
+ &hba->utmrdl_dma_addr,
+ GFP_KERNEL);
+ if (!hba->utmrdl_base_addr ||
+ WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) {
+ dev_err(&hba->pdev->dev,
+ "Task Management Descriptor Memory allocation failed\n");
+ goto out;
+ }
+
+ /* Allocate memory for local reference block */
+ hba->lrb = kcalloc(hba->nutrs, sizeof(struct ufshcd_lrb), GFP_KERNEL);
+ if (!hba->lrb) {
+ dev_err(&hba->pdev->dev, "LRB Memory allocation failed\n");
+ goto out;
+ }
+ return 0;
+out:
+ ufshcd_free_hba_memory(hba);
+ return -ENOMEM;
+}
+
+/**
+ * ufshcd_host_memory_configure - configure local reference block with
+ * memory offsets
+ * @hba: per adapter instance
+ *
+ * Configure Host memory space
+ * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA
+ * address.
+ * 2. Update each UTRD with Response UPIU offset, Response UPIU length
+ * and PRDT offset.
+ * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT
+ * into local reference block.
+ */
+static void ufshcd_host_memory_configure(struct ufs_hba *hba)
+{
+ struct utp_transfer_cmd_desc *cmd_descp;
+ struct utp_transfer_req_desc *utrdlp;
+ dma_addr_t cmd_desc_dma_addr;
+ dma_addr_t cmd_desc_element_addr;
+ u16 response_offset;
+ u16 prdt_offset;
+ int cmd_desc_size;
+ int i;
+
+ utrdlp = hba->utrdl_base_addr;
+ cmd_descp = hba->ucdl_base_addr;
+
+ response_offset =
+ offsetof(struct utp_transfer_cmd_desc, response_upiu);
+ prdt_offset =
+ offsetof(struct utp_transfer_cmd_desc, prd_table);
+
+ cmd_desc_size = sizeof(struct utp_transfer_cmd_desc);
+ cmd_desc_dma_addr = hba->ucdl_dma_addr;
+
+ for (i = 0; i < hba->nutrs; i++) {
+ /* Configure UTRD with command descriptor base address */
+ cmd_desc_element_addr =
+ (cmd_desc_dma_addr + (cmd_desc_size * i));
+ utrdlp[i].command_desc_base_addr_lo =
+ cpu_to_le32(lower_32_bits(cmd_desc_element_addr));
+ utrdlp[i].command_desc_base_addr_hi =
+ cpu_to_le32(upper_32_bits(cmd_desc_element_addr));
+
+ /* Response upiu and prdt offset should be in double words */
+ utrdlp[i].response_upiu_offset =
+ cpu_to_le16((response_offset >> 2));
+ utrdlp[i].prd_table_offset =
+ cpu_to_le16((prdt_offset >> 2));
+ utrdlp[i].response_upiu_length =
+ cpu_to_le16(ALIGNED_UPIU_SIZE);
+
+ hba->lrb[i].utr_descriptor_ptr = (utrdlp + i);
+ hba->lrb[i].ucd_cmd_ptr =
+ (struct utp_upiu_cmd *)(cmd_descp + i);
+ hba->lrb[i].ucd_rsp_ptr =
+ (struct utp_upiu_rsp *)cmd_descp[i].response_upiu;
+ hba->lrb[i].ucd_prdt_ptr =
+ (struct ufshcd_sg_entry *)cmd_descp[i].prd_table;
+ }
+}
+
+/**
+ * ufshcd_dme_link_startup - Notify Unipro to perform link startup
+ * @hba: per adapter instance
+ *
+ * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer,
+ * in order to initialize the Unipro link startup procedure.
+ * Once the Unipro links are up, the device connected to the controller
+ * is detected.
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dme_link_startup(struct ufs_hba *hba)
+{
+ struct uic_command *uic_cmd;
+ unsigned long flags;
+
+ /* check if controller is ready to accept UIC commands */
+ if (((readl(hba->mmio_base + REG_CONTROLLER_STATUS)) &
+ UIC_COMMAND_READY) == 0x0) {
+ dev_err(&hba->pdev->dev,
+ "Controller not ready"
+ " to accept UIC commands\n");
+ return -EIO;
+ }
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+
+ /* form UIC command */
+ uic_cmd = &hba->active_uic_cmd;
+ uic_cmd->command = UIC_CMD_DME_LINK_STARTUP;
+ uic_cmd->argument1 = 0;
+ uic_cmd->argument2 = 0;
+ uic_cmd->argument3 = 0;
+
+ /* enable UIC related interrupts */
+ hba->int_enable_mask |= UIC_COMMAND_COMPL;
+ ufshcd_int_config(hba, UFSHCD_INT_ENABLE);
+
+ /* sending UIC commands to controller */
+ ufshcd_send_uic_command(hba, uic_cmd);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ return 0;
+}
+
+/**
+ * ufshcd_make_hba_operational - Make UFS controller operational
+ * @hba: per adapter instance
+ *
+ * To bring UFS host controller to operational state,
+ * 1. Check if device is present
+ * 2. Configure run-stop-registers
+ * 3. Enable required interrupts
+ * 4. Configure interrupt aggregation
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_make_hba_operational(struct ufs_hba *hba)
+{
+ int err = 0;
+ u32 reg;
+
+ /* check if device present */
+ reg = readl((hba->mmio_base + REG_CONTROLLER_STATUS));
+ if (ufshcd_is_device_present(reg)) {
+ dev_err(&hba->pdev->dev, "cc: Device not present\n");
+ err = -ENXIO;
+ goto out;
+ }
+
+ /*
+ * UCRDY, UTMRLDY and UTRLRDY bits must be 1
+ * DEI, HEI bits must be 0
+ */
+ if (!(ufshcd_get_lists_status(reg))) {
+ ufshcd_enable_run_stop_reg(hba);
+ } else {
+ dev_err(&hba->pdev->dev,
+ "Host controller not ready to process requests");
+ err = -EIO;
+ goto out;
+ }
+
+ /* Enable required interrupts */
+ hba->int_enable_mask |= (UTP_TRANSFER_REQ_COMPL |
+ UIC_ERROR |
+ UTP_TASK_REQ_COMPL |
+ DEVICE_FATAL_ERROR |
+ CONTROLLER_FATAL_ERROR |
+ SYSTEM_BUS_FATAL_ERROR);
+ ufshcd_int_config(hba, UFSHCD_INT_ENABLE);
+
+ /* Configure interrupt aggregation */
+ ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
+
+ if (hba->ufshcd_state == UFSHCD_STATE_RESET)
+ scsi_unblock_requests(hba->host);
+
+ hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
+ scsi_scan_host(hba->host);
+out:
+ return err;
+}
+
+/**
+ * ufshcd_hba_enable - initialize the controller
+ * @hba: per adapter instance
+ *
+ * The controller resets itself and controller firmware initialization
+ * sequence kicks off. When controller is ready it will set
+ * the Host Controller Enable bit to 1.
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_hba_enable(struct ufs_hba *hba)
+{
+ int retry;
+
+ /*
+ * msleep of 1 and 5 used in this function might result in msleep(20),
+ * but it was necessary to send the UFS FPGA to reset mode during
+ * development and testing of this driver. msleep can be changed to
+ * mdelay and retry count can be reduced based on the controller.
+ */
+ if (!ufshcd_is_hba_active(hba)) {
+
+ /* change controller state to "reset state" */
+ ufshcd_hba_stop(hba);
+
+ /*
+ * This delay is based on the testing done with UFS host
+ * controller FPGA. The delay can be changed based on the
+ * host controller used.
+ */
+ msleep(5);
+ }
+
+ /* start controller initialization sequence */
+ ufshcd_hba_start(hba);
+
+ /*
+ * To initialize a UFS host controller HCE bit must be set to 1.
+ * During initialization the HCE bit value changes from 1->0->1.
+ * When the host controller completes initialization sequence
+ * it sets the value of HCE bit to 1. The same HCE bit is read back
+ * to check if the controller has completed initialization sequence.
+ * So without this delay the value HCE = 1, set in the previous
+ * instruction might be read back.
+ * This delay can be changed based on the controller.
+ */
+ msleep(1);
+
+ /* wait for the host controller to complete initialization */
+ retry = 10;
+ while (ufshcd_is_hba_active(hba)) {
+ if (retry) {
+ retry--;
+ } else {
+ dev_err(&hba->pdev->dev,
+ "Controller enable failed\n");
+ return -EIO;
+ }
+ msleep(5);
+ }
+ return 0;
+}
+
+/**
+ * ufshcd_initialize_hba - start the initialization process
+ * @hba: per adapter instance
+ *
+ * 1. Enable the controller via ufshcd_hba_enable.
+ * 2. Program the Transfer Request List Address with the starting address of
+ * UTRDL.
+ * 3. Program the Task Management Request List Address with starting address
+ * of UTMRDL.
+ *
+ * Returns 0 on success, non-zero value on failure.
+ */
+static int ufshcd_initialize_hba(struct ufs_hba *hba)
+{
+ if (ufshcd_hba_enable(hba))
+ return -EIO;
+
+ /* Configure UTRL and UTMRL base address registers */
+ writel(hba->utrdl_dma_addr,
+ (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L));
+ writel(lower_32_bits(hba->utrdl_dma_addr),
+ (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_H));
+ writel(hba->utmrdl_dma_addr,
+ (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_L));
+ writel(upper_32_bits(hba->utmrdl_dma_addr),
+ (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_H));
+
+ /* Initialize unipro link startup procedure */
+ return ufshcd_dme_link_startup(hba);
+}
+
+/**
+ * ufshcd_do_reset - reset the host controller
+ * @hba: per adapter instance
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_do_reset(struct ufs_hba *hba)
+{
+ struct ufshcd_lrb *lrbp;
+ unsigned long flags;
+ int tag;
+
+ /* block commands from midlayer */
+ scsi_block_requests(hba->host);
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->ufshcd_state = UFSHCD_STATE_RESET;
+
+ /* send controller to reset state */
+ ufshcd_hba_stop(hba);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ /* abort outstanding commands */
+ for (tag = 0; tag < hba->nutrs; tag++) {
+ if (test_bit(tag, &hba->outstanding_reqs)) {
+ lrbp = &hba->lrb[tag];
+ scsi_dma_unmap(lrbp->cmd);
+ lrbp->cmd->result = DID_RESET << 16;
+ lrbp->cmd->scsi_done(lrbp->cmd);
+ lrbp->cmd = NULL;
+ }
+ }
+
+ /* clear outstanding request/task bit maps */
+ hba->outstanding_reqs = 0;
+ hba->outstanding_tasks = 0;
+
+ /* start the initialization process */
+ if (ufshcd_initialize_hba(hba)) {
+ dev_err(&hba->pdev->dev,
+ "Reset: Controller initialization failed\n");
+ return FAILED;
+ }
+ return SUCCESS;
+}
+
+/**
+ * ufshcd_slave_alloc - handle initial SCSI device configurations
+ * @sdev: pointer to SCSI device
+ *
+ * Returns success
+ */
+static int ufshcd_slave_alloc(struct scsi_device *sdev)
+{
+ struct ufs_hba *hba;
+
+ hba = shost_priv(sdev->host);
+ sdev->tagged_supported = 1;
+
+ /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */
+ sdev->use_10_for_ms = 1;
+ scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
+
+ /*
+ * Inform SCSI Midlayer that the LUN queue depth is same as the
+ * controller queue depth. If a LUN queue depth is less than the
+ * controller queue depth and if the LUN reports
+ * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted
+ * with scsi_adjust_queue_depth.
+ */
+ scsi_activate_tcq(sdev, hba->nutrs);
+ return 0;
+}
+
+/**
+ * ufshcd_slave_destroy - remove SCSI device configurations
+ * @sdev: pointer to SCSI device
+ */
+static void ufshcd_slave_destroy(struct scsi_device *sdev)
+{
+ struct ufs_hba *hba;
+
+ hba = shost_priv(sdev->host);
+ scsi_deactivate_tcq(sdev, hba->nutrs);
+}
+
+/**
+ * ufshcd_task_req_compl - handle task management request completion
+ * @hba: per adapter instance
+ * @index: index of the completed request
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index)
+{
+ struct utp_task_req_desc *task_req_descp;
+ struct utp_upiu_task_rsp *task_rsp_upiup;
+ unsigned long flags;
+ int ocs_value;
+ int task_result;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+
+ /* Clear completed tasks from outstanding_tasks */
+ __clear_bit(index, &hba->outstanding_tasks);
+
+ task_req_descp = hba->utmrdl_base_addr;
+ ocs_value = ufshcd_get_tmr_ocs(&task_req_descp[index]);
+
+ if (ocs_value == OCS_SUCCESS) {
+ task_rsp_upiup = (struct utp_upiu_task_rsp *)
+ task_req_descp[index].task_rsp_upiu;
+ task_result = be32_to_cpu(task_rsp_upiup->header.dword_1);
+ task_result = ((task_result & MASK_TASK_RESPONSE) >> 8);
+
+ if (task_result != UPIU_TASK_MANAGEMENT_FUNC_COMPL ||
+ task_result != UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED)
+ task_result = FAILED;
+ } else {
+ task_result = FAILED;
+ dev_err(&hba->pdev->dev,
+ "trc: Invalid ocs = %x\n", ocs_value);
+ }
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ return task_result;
+}
+
+/**
+ * ufshcd_adjust_lun_qdepth - Update LUN queue depth if device responds with
+ * SAM_STAT_TASK_SET_FULL SCSI command status.
+ * @cmd: pointer to SCSI command
+ */
+static void ufshcd_adjust_lun_qdepth(struct scsi_cmnd *cmd)
+{
+ struct ufs_hba *hba;
+ int i;
+ int lun_qdepth = 0;
+
+ hba = shost_priv(cmd->device->host);
+
+ /*
+ * LUN queue depth can be obtained by counting outstanding commands
+ * on the LUN.
+ */
+ for (i = 0; i < hba->nutrs; i++) {
+ if (test_bit(i, &hba->outstanding_reqs)) {
+
+ /*
+ * Check if the outstanding command belongs
+ * to the LUN which reported SAM_STAT_TASK_SET_FULL.
+ */
+ if (cmd->device->lun == hba->lrb[i].lun)
+ lun_qdepth++;
+ }
+ }
+
+ /*
+ * LUN queue depth will be total outstanding commands, except the
+ * command for which the LUN reported SAM_STAT_TASK_SET_FULL.
+ */
+ scsi_adjust_queue_depth(cmd->device, MSG_SIMPLE_TAG, lun_qdepth - 1);
+}
+
+/**
+ * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status
+ * @lrb: pointer to local reference block of completed command
+ * @scsi_status: SCSI command status
+ *
+ * Returns value base on SCSI command status
+ */
+static inline int
+ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status)
+{
+ int result = 0;
+
+ switch (scsi_status) {
+ case SAM_STAT_GOOD:
+ result |= DID_OK << 16 |
+ COMMAND_COMPLETE << 8 |
+ SAM_STAT_GOOD;
+ break;
+ case SAM_STAT_CHECK_CONDITION:
+ result |= DID_OK << 16 |
+ COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
+ ufshcd_copy_sense_data(lrbp);
+ break;
+ case SAM_STAT_BUSY:
+ result |= SAM_STAT_BUSY;
+ break;
+ case SAM_STAT_TASK_SET_FULL:
+
+ /*
+ * If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue
+ * depth needs to be adjusted to the exact number of
+ * outstanding commands the LUN can handle at any given time.
+ */
+ ufshcd_adjust_lun_qdepth(lrbp->cmd);
+ result |= SAM_STAT_TASK_SET_FULL;
+ break;
+ case SAM_STAT_TASK_ABORTED:
+ result |= SAM_STAT_TASK_ABORTED;
+ break;
+ default:
+ result |= DID_ERROR << 16;
+ break;
+ } /* end of switch */
+
+ return result;
+}
+
+/**
+ * ufshcd_transfer_rsp_status - Get overall status of the response
+ * @hba: per adapter instance
+ * @lrb: pointer to local reference block of completed command
+ *
+ * Returns result of the command to notify SCSI midlayer
+ */
+static inline int
+ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
+{
+ int result = 0;
+ int scsi_status;
+ int ocs;
+
+ /* overall command status of utrd */
+ ocs = ufshcd_get_tr_ocs(lrbp);
+
+ switch (ocs) {
+ case OCS_SUCCESS:
+
+ /* check if the returned transfer response is valid */
+ result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr);
+ if (result) {
+ dev_err(&hba->pdev->dev,
+ "Invalid response = %x\n", result);
+ break;
+ }
+
+ /*
+ * get the response UPIU result to extract
+ * the SCSI command status
+ */
+ result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr);
+
+ /*
+ * get the result based on SCSI status response
+ * to notify the SCSI midlayer of the command status
+ */
+ scsi_status = result & MASK_SCSI_STATUS;
+ result = ufshcd_scsi_cmd_status(lrbp, scsi_status);
+ break;
+ case OCS_ABORTED:
+ result |= DID_ABORT << 16;
+ break;
+ case OCS_INVALID_CMD_TABLE_ATTR:
+ case OCS_INVALID_PRDT_ATTR:
+ case OCS_MISMATCH_DATA_BUF_SIZE:
+ case OCS_MISMATCH_RESP_UPIU_SIZE:
+ case OCS_PEER_COMM_FAILURE:
+ case OCS_FATAL_ERROR:
+ default:
+ result |= DID_ERROR << 16;
+ dev_err(&hba->pdev->dev,
+ "OCS error from controller = %x\n", ocs);
+ break;
+ } /* end of switch */
+
+ return result;
+}
+
+/**
+ * ufshcd_transfer_req_compl - handle SCSI and query command completion
+ * @hba: per adapter instance
+ */
+static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
+{
+ struct ufshcd_lrb *lrb;
+ unsigned long completed_reqs;
+ u32 tr_doorbell;
+ int result;
+ int index;
+
+ lrb = hba->lrb;
+ tr_doorbell =
+ readl(hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL);
+ completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
+
+ for (index = 0; index < hba->nutrs; index++) {
+ if (test_bit(index, &completed_reqs)) {
+
+ result = ufshcd_transfer_rsp_status(hba, &lrb[index]);
+
+ if (lrb[index].cmd) {
+ scsi_dma_unmap(lrb[index].cmd);
+ lrb[index].cmd->result = result;
+ lrb[index].cmd->scsi_done(lrb[index].cmd);
+
+ /* Mark completed command as NULL in LRB */
+ lrb[index].cmd = NULL;
+ }
+ } /* end of if */
+ } /* end of for */
+
+ /* clear corresponding bits of completed commands */
+ hba->outstanding_reqs ^= completed_reqs;
+
+ /* Reset interrupt aggregation counters */
+ ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
+}
+
+/**
+ * ufshcd_uic_cc_handler - handle UIC command completion
+ * @work: pointer to a work queue structure
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static void ufshcd_uic_cc_handler (struct work_struct *work)
+{
+ struct ufs_hba *hba;
+
+ hba = container_of(work, struct ufs_hba, uic_workq);
+
+ if ((hba->active_uic_cmd.command == UIC_CMD_DME_LINK_STARTUP) &&
+ !(ufshcd_get_uic_cmd_result(hba))) {
+
+ if (ufshcd_make_hba_operational(hba))
+ dev_err(&hba->pdev->dev,
+ "cc: hba not operational state\n");
+ return;
+ }
+}
+
+/**
+ * ufshcd_fatal_err_handler - handle fatal errors
+ * @hba: per adapter instance
+ */
+static void ufshcd_fatal_err_handler(struct work_struct *work)
+{
+ struct ufs_hba *hba;
+ hba = container_of(work, struct ufs_hba, feh_workq);
+
+ /* check if reset is already in progress */
+ if (hba->ufshcd_state != UFSHCD_STATE_RESET)
+ ufshcd_do_reset(hba);
+}
+
+/**
+ * ufshcd_err_handler - Check for fatal errors
+ * @work: pointer to a work queue structure
+ */
+static void ufshcd_err_handler(struct ufs_hba *hba)
+{
+ u32 reg;
+
+ if (hba->errors & INT_FATAL_ERRORS)
+ goto fatal_eh;
+
+ if (hba->errors & UIC_ERROR) {
+
+ reg = readl(hba->mmio_base +
+ REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER);
+ if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT)
+ goto fatal_eh;
+ }
+ return;
+fatal_eh:
+ hba->ufshcd_state = UFSHCD_STATE_ERROR;
+ schedule_work(&hba->feh_workq);
+}
+
+/**
+ * ufshcd_tmc_handler - handle task management function completion
+ * @hba: per adapter instance
+ */
+static void ufshcd_tmc_handler(struct ufs_hba *hba)
+{
+ u32 tm_doorbell;
+
+ tm_doorbell = readl(hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL);
+ hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks;
+ wake_up_interruptible(&hba->ufshcd_tm_wait_queue);
+}
+
+/**
+ * ufshcd_sl_intr - Interrupt service routine
+ * @hba: per adapter instance
+ * @intr_status: contains interrupts generated by the controller
+ */
+static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
+{
+ hba->errors = UFSHCD_ERROR_MASK & intr_status;
+ if (hba->errors)
+ ufshcd_err_handler(hba);
+
+ if (intr_status & UIC_COMMAND_COMPL)
+ schedule_work(&hba->uic_workq);
+
+ if (intr_status & UTP_TASK_REQ_COMPL)
+ ufshcd_tmc_handler(hba);
+
+ if (intr_status & UTP_TRANSFER_REQ_COMPL)
+ ufshcd_transfer_req_compl(hba);
+}
+
+/**
+ * ufshcd_intr - Main interrupt service routine
+ * @irq: irq number
+ * @__hba: pointer to adapter instance
+ *
+ * Returns IRQ_HANDLED - If interrupt is valid
+ * IRQ_NONE - If invalid interrupt
+ */
+static irqreturn_t ufshcd_intr(int irq, void *__hba)
+{
+ u32 intr_status;
+ irqreturn_t retval = IRQ_NONE;
+ struct ufs_hba *hba = __hba;
+
+ spin_lock(hba->host->host_lock);
+ intr_status = readl(hba->mmio_base + REG_INTERRUPT_STATUS);
+
+ if (intr_status) {
+ ufshcd_sl_intr(hba, intr_status);
+
+ /* If UFSHCI 1.0 then clear interrupt status register */
+ if (hba->ufs_version == UFSHCI_VERSION_10)
+ writel(intr_status,
+ (hba->mmio_base + REG_INTERRUPT_STATUS));
+ retval = IRQ_HANDLED;
+ }
+ spin_unlock(hba->host->host_lock);
+ return retval;
+}
+
+/**
+ * ufshcd_issue_tm_cmd - issues task management commands to controller
+ * @hba: per adapter instance
+ * @lrbp: pointer to local reference block
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int
+ufshcd_issue_tm_cmd(struct ufs_hba *hba,
+ struct ufshcd_lrb *lrbp,
+ u8 tm_function)
+{
+ struct utp_task_req_desc *task_req_descp;
+ struct utp_upiu_task_req *task_req_upiup;
+ struct Scsi_Host *host;
+ unsigned long flags;
+ int free_slot = 0;
+ int err;
+
+ host = hba->host;
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ /* If task management queue is full */
+ free_slot = ufshcd_get_tm_free_slot(hba);
+ if (free_slot >= hba->nutmrs) {
+ spin_unlock_irqrestore(host->host_lock, flags);
+ dev_err(&hba->pdev->dev, "Task management queue full\n");
+ err = FAILED;
+ goto out;
+ }
+
+ task_req_descp = hba->utmrdl_base_addr;
+ task_req_descp += free_slot;
+
+ /* Configure task request descriptor */
+ task_req_descp->header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD);
+ task_req_descp->header.dword_2 =
+ cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
+
+ /* Configure task request UPIU */
+ task_req_upiup =
+ (struct utp_upiu_task_req *) task_req_descp->task_req_upiu;
+ task_req_upiup->header.dword_0 =
+ cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0,
+ lrbp->lun, lrbp->task_tag));
+ task_req_upiup->header.dword_1 =
+ cpu_to_be32(UPIU_HEADER_DWORD(0, tm_function, 0, 0));
+
+ task_req_upiup->input_param1 = lrbp->lun;
+ task_req_upiup->input_param1 =
+ cpu_to_be32(task_req_upiup->input_param1);
+ task_req_upiup->input_param2 = lrbp->task_tag;
+ task_req_upiup->input_param2 =
+ cpu_to_be32(task_req_upiup->input_param2);
+
+ /* send command to the controller */
+ __set_bit(free_slot, &hba->outstanding_tasks);
+ writel((1 << free_slot),
+ (hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL));
+
+ spin_unlock_irqrestore(host->host_lock, flags);
+
+ /* wait until the task management command is completed */
+ err =
+ wait_event_interruptible_timeout(hba->ufshcd_tm_wait_queue,
+ (test_bit(free_slot,
+ &hba->tm_condition) != 0),
+ 60 * HZ);
+ if (!err) {
+ dev_err(&hba->pdev->dev,
+ "Task management command timed-out\n");
+ err = FAILED;
+ goto out;
+ }
+ clear_bit(free_slot, &hba->tm_condition);
+ return ufshcd_task_req_compl(hba, free_slot);
+out:
+ return err;
+}
+
+/**
+ * ufshcd_device_reset - reset device and abort all the pending commands
+ * @cmd: SCSI command pointer
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_device_reset(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host;
+ struct ufs_hba *hba;
+ unsigned int tag;
+ u32 pos;
+ int err;
+
+ host = cmd->device->host;
+ hba = shost_priv(host);
+ tag = cmd->request->tag;
+
+ err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_LOGICAL_RESET);
+ if (err)
+ goto out;
+
+ for (pos = 0; pos < hba->nutrs; pos++) {
+ if (test_bit(pos, &hba->outstanding_reqs) &&
+ (hba->lrb[tag].lun == hba->lrb[pos].lun)) {
+
+ /* clear the respective UTRLCLR register bit */
+ ufshcd_utrl_clear(hba, pos);
+
+ clear_bit(pos, &hba->outstanding_reqs);
+
+ if (hba->lrb[pos].cmd) {
+ scsi_dma_unmap(hba->lrb[pos].cmd);
+ hba->lrb[pos].cmd->result =
+ DID_ABORT << 16;
+ hba->lrb[pos].cmd->scsi_done(cmd);
+ hba->lrb[pos].cmd = NULL;
+ }
+ }
+ } /* end of for */
+out:
+ return err;
+}
+
+/**
+ * ufshcd_host_reset - Main reset function registered with scsi layer
+ * @cmd: SCSI command pointer
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_host_reset(struct scsi_cmnd *cmd)
+{
+ struct ufs_hba *hba;
+
+ hba = shost_priv(cmd->device->host);
+
+ if (hba->ufshcd_state == UFSHCD_STATE_RESET)
+ return SUCCESS;
+
+ return (ufshcd_do_reset(hba) == SUCCESS) ? SUCCESS : FAILED;
+}
+
+/**
+ * ufshcd_abort - abort a specific command
+ * @cmd: SCSI command pointer
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_abort(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host;
+ struct ufs_hba *hba;
+ unsigned long flags;
+ unsigned int tag;
+ int err;
+
+ host = cmd->device->host;
+ hba = shost_priv(host);
+ tag = cmd->request->tag;
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ /* check if command is still pending */
+ if (!(test_bit(tag, &hba->outstanding_reqs))) {
+ err = FAILED;
+ spin_unlock_irqrestore(host->host_lock, flags);
+ goto out;
+ }
+ spin_unlock_irqrestore(host->host_lock, flags);
+
+ err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_ABORT_TASK);
+ if (err)
+ goto out;
+
+ scsi_dma_unmap(cmd);
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ /* clear the respective UTRLCLR register bit */
+ ufshcd_utrl_clear(hba, tag);
+
+ __clear_bit(tag, &hba->outstanding_reqs);
+ hba->lrb[tag].cmd = NULL;
+ spin_unlock_irqrestore(host->host_lock, flags);
+out:
+ return err;
+}
+
+static struct scsi_host_template ufshcd_driver_template = {
+ .module = THIS_MODULE,
+ .name = UFSHCD,
+ .proc_name = UFSHCD,
+ .queuecommand = ufshcd_queuecommand,
+ .slave_alloc = ufshcd_slave_alloc,
+ .slave_destroy = ufshcd_slave_destroy,
+ .eh_abort_handler = ufshcd_abort,
+ .eh_device_reset_handler = ufshcd_device_reset,
+ .eh_host_reset_handler = ufshcd_host_reset,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = UFSHCD_CMD_PER_LUN,
+ .can_queue = UFSHCD_CAN_QUEUE,
+};
+
+/**
+ * ufshcd_shutdown - main function to put the controller in reset state
+ * @pdev: pointer to PCI device handle
+ */
+static void ufshcd_shutdown(struct pci_dev *pdev)
+{
+ ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
+}
+
+#ifdef CONFIG_PM
+/**
+ * ufshcd_suspend - suspend power management function
+ * @pdev: pointer to PCI device handle
+ * @state: power state
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ /*
+ * TODO:
+ * 1. Block SCSI requests from SCSI midlayer
+ * 2. Change the internal driver state to non operational
+ * 3. Set UTRLRSR and UTMRLRSR bits to zero
+ * 4. Wait until outstanding commands are completed
+ * 5. Set HCE to zero to send the UFS host controller to reset state
+ */
+
+ return -ENOSYS;
+}
+
+/**
+ * ufshcd_resume - resume power management function
+ * @pdev: pointer to PCI device handle
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_resume(struct pci_dev *pdev)
+{
+ /*
+ * TODO:
+ * 1. Set HCE to 1, to start the UFS host controller
+ * initialization process
+ * 2. Set UTRLRSR and UTMRLRSR bits to 1
+ * 3. Change the internal driver state to operational
+ * 4. Unblock SCSI requests from SCSI midlayer
+ */
+
+ return -ENOSYS;
+}
+#endif /* CONFIG_PM */
+
+/**
+ * ufshcd_hba_free - free allocated memory for
+ * host memory space data structures
+ * @hba: per adapter instance
+ */
+static void ufshcd_hba_free(struct ufs_hba *hba)
+{
+ iounmap(hba->mmio_base);
+ ufshcd_free_hba_memory(hba);
+ pci_release_regions(hba->pdev);
+}
+
+/**
+ * ufshcd_remove - de-allocate PCI/SCSI host and host memory space
+ * data structure memory
+ * @pdev - pointer to PCI handle
+ */
+static void ufshcd_remove(struct pci_dev *pdev)
+{
+ struct ufs_hba *hba = pci_get_drvdata(pdev);
+
+ /* disable interrupts */
+ ufshcd_int_config(hba, UFSHCD_INT_DISABLE);
+ free_irq(pdev->irq, hba);
+
+ ufshcd_hba_stop(hba);
+ ufshcd_hba_free(hba);
+
+ scsi_remove_host(hba->host);
+ scsi_host_put(hba->host);
+ pci_set_drvdata(pdev, NULL);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * ufshcd_set_dma_mask - Set dma mask based on the controller
+ * addressing capability
+ * @pdev: PCI device structure
+ *
+ * Returns 0 for success, non-zero for failure
+ */
+static int ufshcd_set_dma_mask(struct ufs_hba *hba)
+{
+ int err;
+ u64 dma_mask;
+
+ /*
+ * If controller supports 64 bit addressing mode, then set the DMA
+ * mask to 64-bit, else set the DMA mask to 32-bit
+ */
+ if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT)
+ dma_mask = DMA_BIT_MASK(64);
+ else
+ dma_mask = DMA_BIT_MASK(32);
+
+ err = pci_set_dma_mask(hba->pdev, dma_mask);
+ if (err)
+ return err;
+
+ err = pci_set_consistent_dma_mask(hba->pdev, dma_mask);
+
+ return err;
+}
+
+/**
+ * ufshcd_probe - probe routine of the driver
+ * @pdev: pointer to PCI device handle
+ * @id: PCI device id
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devinit
+ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct Scsi_Host *host;
+ struct ufs_hba *hba;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ goto out_error;
+ }
+
+ pci_set_master(pdev);
+
+ host = scsi_host_alloc(&ufshcd_driver_template,
+ sizeof(struct ufs_hba));
+ if (!host) {
+ dev_err(&pdev->dev, "scsi_host_alloc failed\n");
+ err = -ENOMEM;
+ goto out_disable;
+ }
+ hba = shost_priv(host);
+
+ err = pci_request_regions(pdev, UFSHCD);
+ if (err < 0) {
+ dev_err(&pdev->dev, "request regions failed\n");
+ goto out_disable;
+ }
+
+ hba->mmio_base = pci_ioremap_bar(pdev, 0);
+ if (!hba->mmio_base) {
+ dev_err(&pdev->dev, "memory map failed\n");
+ err = -ENOMEM;
+ goto out_release_regions;
+ }
+
+ hba->host = host;
+ hba->pdev = pdev;
+
+ /* Read capabilities registers */
+ ufshcd_hba_capabilities(hba);
+
+ /* Get UFS version supported by the controller */
+ hba->ufs_version = ufshcd_get_ufs_version(hba);
+
+ err = ufshcd_set_dma_mask(hba);
+ if (err) {
+ dev_err(&pdev->dev, "set dma mask failed\n");
+ goto out_iounmap;
+ }
+
+ /* Allocate memory for host memory space */
+ err = ufshcd_memory_alloc(hba);
+ if (err) {
+ dev_err(&pdev->dev, "Memory allocation failed\n");
+ goto out_iounmap;
+ }
+
+ /* Configure LRB */
+ ufshcd_host_memory_configure(hba);
+
+ host->can_queue = hba->nutrs;
+ host->cmd_per_lun = hba->nutrs;
+ host->max_id = UFSHCD_MAX_ID;
+ host->max_lun = UFSHCD_MAX_LUNS;
+ host->max_channel = UFSHCD_MAX_CHANNEL;
+ host->unique_id = host->host_no;
+ host->max_cmd_len = MAX_CDB_SIZE;
+
+ /* Initailize wait queue for task management */
+ init_waitqueue_head(&hba->ufshcd_tm_wait_queue);
+
+ /* Initialize work queues */
+ INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler);
+ INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler);
+
+ /* IRQ registration */
+ err = request_irq(pdev->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
+ if (err) {
+ dev_err(&pdev->dev, "request irq failed\n");
+ goto out_lrb_free;
+ }
+
+ /* Enable SCSI tag mapping */
+ err = scsi_init_shared_tag_map(host, host->can_queue);
+ if (err) {
+ dev_err(&pdev->dev, "init shared queue failed\n");
+ goto out_free_irq;
+ }
+
+ pci_set_drvdata(pdev, hba);
+
+ err = scsi_add_host(host, &pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "scsi_add_host failed\n");
+ goto out_free_irq;
+ }
+
+ /* Initialization routine */
+ err = ufshcd_initialize_hba(hba);
+ if (err) {
+ dev_err(&pdev->dev, "Initialization failed\n");
+ goto out_free_irq;
+ }
+
+ return 0;
+
+out_free_irq:
+ free_irq(pdev->irq, hba);
+out_lrb_free:
+ ufshcd_free_hba_memory(hba);
+out_iounmap:
+ iounmap(hba->mmio_base);
+out_release_regions:
+ pci_release_regions(pdev);
+out_disable:
+ scsi_host_put(host);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+out_error:
+ return err;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
+ { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
+
+static struct pci_driver ufshcd_pci_driver = {
+ .name = UFSHCD,
+ .id_table = ufshcd_pci_tbl,
+ .probe = ufshcd_probe,
+ .remove = __devexit_p(ufshcd_remove),
+ .shutdown = ufshcd_shutdown,
+#ifdef CONFIG_PM
+ .suspend = ufshcd_suspend,
+ .resume = ufshcd_resume,
+#endif
+};
+
+/**
+ * ufshcd_init - Driver registration routine
+ */
+static int __init ufshcd_init(void)
+{
+ return pci_register_driver(&ufshcd_pci_driver);
+}
+module_init(ufshcd_init);
+
+/**
+ * ufshcd_exit - Driver exit clean-up routine
+ */
+static void __exit ufshcd_exit(void)
+{
+ pci_unregister_driver(&ufshcd_pci_driver);
+}
+module_exit(ufshcd_exit);
+
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>, "
+ "Vinayak Holikatti <h.vinayak@samsung.com>");
+MODULE_DESCRIPTION("Generic UFS host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UFSHCD_DRIVER_VERSION);
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
new file mode 100644
index 00000000000..6e3510f7116
--- /dev/null
+++ b/drivers/scsi/ufs/ufshci.h
@@ -0,0 +1,376 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshci.h
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#ifndef _UFSHCI_H
+#define _UFSHCI_H
+
+enum {
+ TASK_REQ_UPIU_SIZE_DWORDS = 8,
+ TASK_RSP_UPIU_SIZE_DWORDS = 8,
+ ALIGNED_UPIU_SIZE = 128,
+};
+
+/* UFSHCI Registers */
+enum {
+ REG_CONTROLLER_CAPABILITIES = 0x00,
+ REG_UFS_VERSION = 0x08,
+ REG_CONTROLLER_DEV_ID = 0x10,
+ REG_CONTROLLER_PROD_ID = 0x14,
+ REG_INTERRUPT_STATUS = 0x20,
+ REG_INTERRUPT_ENABLE = 0x24,
+ REG_CONTROLLER_STATUS = 0x30,
+ REG_CONTROLLER_ENABLE = 0x34,
+ REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
+ REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
+ REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
+ REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
+ REG_UIC_ERROR_CODE_DME = 0x48,
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
+ REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
+ REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
+ REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
+ REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
+ REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
+ REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
+ REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
+ REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
+ REG_UIC_COMMAND = 0x90,
+ REG_UIC_COMMAND_ARG_1 = 0x94,
+ REG_UIC_COMMAND_ARG_2 = 0x98,
+ REG_UIC_COMMAND_ARG_3 = 0x9C,
+};
+
+/* Controller capability masks */
+enum {
+ MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
+ MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
+ MASK_64_ADDRESSING_SUPPORT = 0x01000000,
+ MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
+ MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
+};
+
+/* UFS Version 08h */
+#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
+#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
+
+/* Controller UFSHCI version */
+enum {
+ UFSHCI_VERSION_10 = 0x00010000,
+ UFSHCI_VERSION_11 = 0x00010100,
+};
+
+/*
+ * HCDDID - Host Controller Identification Descriptor
+ * - Device ID and Device Class 10h
+ */
+#define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
+#define DEVICE_ID UFS_MASK(0xFF, 24)
+
+/*
+ * HCPMID - Host Controller Identification Descriptor
+ * - Product/Manufacturer ID 14h
+ */
+#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
+#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
+
+#define UFS_BIT(x) (1L << (x))
+
+#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0)
+#define UIC_DME_END_PT_RESET UFS_BIT(1)
+#define UIC_ERROR UFS_BIT(2)
+#define UIC_TEST_MODE UFS_BIT(3)
+#define UIC_POWER_MODE UFS_BIT(4)
+#define UIC_HIBERNATE_EXIT UFS_BIT(5)
+#define UIC_HIBERNATE_ENTER UFS_BIT(6)
+#define UIC_LINK_LOST UFS_BIT(7)
+#define UIC_LINK_STARTUP UFS_BIT(8)
+#define UTP_TASK_REQ_COMPL UFS_BIT(9)
+#define UIC_COMMAND_COMPL UFS_BIT(10)
+#define DEVICE_FATAL_ERROR UFS_BIT(11)
+#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
+#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
+
+#define UFSHCD_ERROR_MASK (UIC_ERROR |\
+ DEVICE_FATAL_ERROR |\
+ CONTROLLER_FATAL_ERROR |\
+ SYSTEM_BUS_FATAL_ERROR)
+
+#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
+ CONTROLLER_FATAL_ERROR |\
+ SYSTEM_BUS_FATAL_ERROR)
+
+/* HCS - Host Controller Status 30h */
+#define DEVICE_PRESENT UFS_BIT(0)
+#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1)
+#define UTP_TASK_REQ_LIST_READY UFS_BIT(2)
+#define UIC_COMMAND_READY UFS_BIT(3)
+#define HOST_ERROR_INDICATOR UFS_BIT(4)
+#define DEVICE_ERROR_INDICATOR UFS_BIT(5)
+#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
+
+/* HCE - Host Controller Enable 34h */
+#define CONTROLLER_ENABLE UFS_BIT(0)
+#define CONTROLLER_DISABLE 0x0
+
+/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
+#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31)
+#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
+
+/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
+#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31)
+#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF
+#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
+
+/* UECN - Host UIC Error Code Network Layer 40h */
+#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31)
+#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
+
+/* UECT - Host UIC Error Code Transport Layer 44h */
+#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31)
+#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
+
+/* UECDME - Host UIC Error Code DME 48h */
+#define UIC_DME_ERROR UFS_BIT(31)
+#define UIC_DME_ERROR_CODE_MASK 0x1
+
+#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
+#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
+#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16)
+#define INT_AGGR_STATUS_BIT UFS_BIT(20)
+#define INT_AGGR_PARAM_WRITE UFS_BIT(24)
+#define INT_AGGR_ENABLE UFS_BIT(31)
+
+/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
+
+/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
+
+/* UICCMD - UIC Command */
+#define COMMAND_OPCODE_MASK 0xFF
+#define GEN_SELECTOR_INDEX_MASK 0xFFFF
+
+#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
+#define RESET_LEVEL 0xFF
+
+#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
+#define CONFIG_RESULT_CODE_MASK 0xFF
+#define GENERIC_ERROR_CODE_MASK 0xFF
+
+/* UIC Commands */
+enum {
+ UIC_CMD_DME_GET = 0x01,
+ UIC_CMD_DME_SET = 0x02,
+ UIC_CMD_DME_PEER_GET = 0x03,
+ UIC_CMD_DME_PEER_SET = 0x04,
+ UIC_CMD_DME_POWERON = 0x10,
+ UIC_CMD_DME_POWEROFF = 0x11,
+ UIC_CMD_DME_ENABLE = 0x12,
+ UIC_CMD_DME_RESET = 0x14,
+ UIC_CMD_DME_END_PT_RST = 0x15,
+ UIC_CMD_DME_LINK_STARTUP = 0x16,
+ UIC_CMD_DME_HIBER_ENTER = 0x17,
+ UIC_CMD_DME_HIBER_EXIT = 0x18,
+ UIC_CMD_DME_TEST_MODE = 0x1A,
+};
+
+/* UIC Config result code / Generic error code */
+enum {
+ UIC_CMD_RESULT_SUCCESS = 0x00,
+ UIC_CMD_RESULT_INVALID_ATTR = 0x01,
+ UIC_CMD_RESULT_FAILURE = 0x01,
+ UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
+ UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
+ UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
+ UIC_CMD_RESULT_BAD_INDEX = 0x05,
+ UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
+ UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
+ UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
+ UIC_CMD_RESULT_BUSY = 0x09,
+ UIC_CMD_RESULT_DME_FAILURE = 0x0A,
+};
+
+#define MASK_UIC_COMMAND_RESULT 0xFF
+
+#define INT_AGGR_COUNTER_THRESHOLD_VALUE (0x1F << 8)
+#define INT_AGGR_TIMEOUT_VALUE (0x02)
+
+/* Interrupt disable masks */
+enum {
+ /* Interrupt disable mask for UFSHCI v1.0 */
+ INTERRUPT_DISABLE_MASK_10 = 0xFFFF,
+
+ /* Interrupt disable mask for UFSHCI v1.1 */
+ INTERRUPT_DISABLE_MASK_11 = 0x0,
+};
+
+/*
+ * Request Descriptor Definitions
+ */
+
+/* Transfer request command type */
+enum {
+ UTP_CMD_TYPE_SCSI = 0x0,
+ UTP_CMD_TYPE_UFS = 0x1,
+ UTP_CMD_TYPE_DEV_MANAGE = 0x2,
+};
+
+enum {
+ UTP_SCSI_COMMAND = 0x00000000,
+ UTP_NATIVE_UFS_COMMAND = 0x10000000,
+ UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
+ UTP_REQ_DESC_INT_CMD = 0x01000000,
+};
+
+/* UTP Transfer Request Data Direction (DD) */
+enum {
+ UTP_NO_DATA_TRANSFER = 0x00000000,
+ UTP_HOST_TO_DEVICE = 0x02000000,
+ UTP_DEVICE_TO_HOST = 0x04000000,
+};
+
+/* Overall command status values */
+enum {
+ OCS_SUCCESS = 0x0,
+ OCS_INVALID_CMD_TABLE_ATTR = 0x1,
+ OCS_INVALID_PRDT_ATTR = 0x2,
+ OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
+ OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
+ OCS_PEER_COMM_FAILURE = 0x5,
+ OCS_ABORTED = 0x6,
+ OCS_FATAL_ERROR = 0x7,
+ OCS_INVALID_COMMAND_STATUS = 0x0F,
+ MASK_OCS = 0x0F,
+};
+
+/**
+ * struct ufshcd_sg_entry - UFSHCI PRD Entry
+ * @base_addr: Lower 32bit physical address DW-0
+ * @upper_addr: Upper 32bit physical address DW-1
+ * @reserved: Reserved for future use DW-2
+ * @size: size of physical segment DW-3
+ */
+struct ufshcd_sg_entry {
+ u32 base_addr;
+ u32 upper_addr;
+ u32 reserved;
+ u32 size;
+};
+
+/**
+ * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
+ * @command_upiu: Command UPIU Frame address
+ * @response_upiu: Response UPIU Frame address
+ * @prd_table: Physical Region Descriptor
+ */
+struct utp_transfer_cmd_desc {
+ u8 command_upiu[ALIGNED_UPIU_SIZE];
+ u8 response_upiu[ALIGNED_UPIU_SIZE];
+ struct ufshcd_sg_entry prd_table[SG_ALL];
+};
+
+/**
+ * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
+ * @dword0: Descriptor Header DW0
+ * @dword1: Descriptor Header DW1
+ * @dword2: Descriptor Header DW2
+ * @dword3: Descriptor Header DW3
+ */
+struct request_desc_header {
+ u32 dword_0;
+ u32 dword_1;
+ u32 dword_2;
+ u32 dword_3;
+};
+
+/**
+ * struct utp_transfer_req_desc - UTRD structure
+ * @header: UTRD header DW-0 to DW-3
+ * @command_desc_base_addr_lo: UCD base address low DW-4
+ * @command_desc_base_addr_hi: UCD base address high DW-5
+ * @response_upiu_length: response UPIU length DW-6
+ * @response_upiu_offset: response UPIU offset DW-6
+ * @prd_table_length: Physical region descriptor length DW-7
+ * @prd_table_offset: Physical region descriptor offset DW-7
+ */
+struct utp_transfer_req_desc {
+
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-5*/
+ u32 command_desc_base_addr_lo;
+ u32 command_desc_base_addr_hi;
+
+ /* DW 6 */
+ u16 response_upiu_length;
+ u16 response_upiu_offset;
+
+ /* DW 7 */
+ u16 prd_table_length;
+ u16 prd_table_offset;
+};
+
+/**
+ * struct utp_task_req_desc - UTMRD structure
+ * @header: UTMRD header DW-0 to DW-3
+ * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11
+ * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19
+ */
+struct utp_task_req_desc {
+
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-11 */
+ u32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS];
+
+ /* DW 12-19 */
+ u32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS];
+};
+
+#endif /* End of Header */