Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1204 insertions, 0 deletions

diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
new file mode 100644
index 00000000000..7484916fe2a
--- /dev/null
+++ b/drivers/scsi/ultrastor.c
@@ -0,0 +1,1204 @@
+/*
+ *	ultrastor.c	Copyright (C) 1992 David B. Gentzel
+ *	Low-level SCSI driver for UltraStor 14F, 24F, and 34F
+ *	by David B. Gentzel, Whitfield Software Services, Carnegie, PA
+ *	    (gentzel@nova.enet.dec.com)
+ *  scatter/gather added by Scott Taylor (n217cg@tamuts.tamu.edu)
+ *  24F and multiple command support by John F. Carr (jfc@athena.mit.edu)
+ *    John's work modified by Caleb Epstein (cae@jpmorgan.com) and 
+ *    Eric Youngdale (ericy@cais.com).
+ *	Thanks to UltraStor for providing the necessary documentation
+ *
+ *  This is an old driver, for the 14F and 34F you should be using the
+ *  u14-34f driver instead.
+ */
+
+/*
+ * TODO:
+ *	1. Find out why scatter/gather is limited to 16 requests per command.
+ *         This is fixed, at least on the 24F, as of version 1.12 - CAE.
+ *	2. Look at command linking (mscp.command_link and
+ *	   mscp.command_link_id).  (Does not work with many disks, 
+ *				and no performance increase.  ERY).
+ *	3. Allow multiple adapters.
+ */
+
+/*
+ * NOTES:
+ *    The UltraStor 14F, 24F, and 34F are a family of intelligent, high
+ *    performance SCSI-2 host adapters.  They all support command queueing
+ *    and scatter/gather I/O.  Some of them can also emulate the standard
+ *    WD1003 interface for use with OS's which don't support SCSI.  Here
+ *    is the scoop on the various models:
+ *	14F - ISA first-party DMA HA with floppy support and WD1003 emulation.
+ *	14N - ISA HA with floppy support.  I think that this is a non-DMA
+ *	      HA.  Nothing further known.
+ *	24F - EISA Bus Master HA with floppy support and WD1003 emulation.
+ *	34F - VL-Bus Bus Master HA with floppy support (no WD1003 emulation).
+ *
+ *    The 14F, 24F, and 34F are supported by this driver.
+ *
+ *    Places flagged with a triple question-mark are things which are either
+ *    unfinished, questionable, or wrong.
+ */
+
+/* Changes from version 1.11 alpha to 1.12
+ *
+ * Increased the size of the scatter-gather list to 33 entries for
+ * the 24F adapter (it was 16).  I don't have the specs for the 14F
+ * or the 34F, so they may support larger s-g lists as well.
+ *
+ * Caleb Epstein <cae@jpmorgan.com>
+ */
+
+/* Changes from version 1.9 to 1.11
+ *
+ * Patches to bring this driver up to speed with the default kernel
+ * driver which supports only the 14F and 34F adapters.  This version
+ * should compile cleanly into 0.99.13, 0.99.12 and probably 0.99.11.
+ *
+ * Fixes from Eric Youngdale to fix a few possible race conditions and
+ * several problems with bit testing operations (insufficient
+ * parentheses).
+ *
+ * Removed the ultrastor_abort() and ultrastor_reset() functions
+ * (enclosed them in #if 0 / #endif).  These functions, at least on
+ * the 24F, cause the SCSI bus to do odd things and generally lead to
+ * kernel panics and machine hangs.  This is like the Adaptec code.
+ *
+ * Use check/snarf_region for 14f, 34f to avoid I/O space address conflicts.
+ */
+
+/* Changes from version 1.8 to version 1.9
+ *
+ *  0.99.11 patches (cae@jpmorgan.com) */
+
+/* Changes from version 1.7 to version 1.8
+ *
+ * Better error reporting.
+ */
+
+/* Changes from version 1.6 to version 1.7
+ *
+ * Removed CSIR command code.
+ *
+ * Better race condition avoidance (xchgb function added).
+ *
+ * Set ICM and OGM status to zero at probe (24F)
+ *
+ * reset sends soft reset to UltraStor adapter
+ *
+ * reset adapter if adapter interrupts with an invalid MSCP address
+ *
+ * handle aborted command interrupt (24F)
+ *
+ */
+
+/* Changes from version 1.5 to version 1.6:
+ *
+ * Read MSCP address from ICM _before_ clearing the interrupt flag.
+ * This fixes a race condition.
+ */
+
+/* Changes from version 1.4 to version 1.5:
+ *
+ * Abort now calls done when multiple commands are enabled.
+ *
+ * Clear busy when aborted command finishes, not when abort is called.
+ *
+ * More debugging messages for aborts.
+ */
+
+/* Changes from version 1.3 to version 1.4:
+ *
+ * Enable automatic request of sense data on error (requires newer version
+ * of scsi.c to be useful).
+ *
+ * Fix PORT_OVERRIDE for 14F.
+ *
+ * Fix abort and reset to work properly (config.aborted wasn't cleared
+ * after it was tested, so after a command abort no further commands would
+ * work).
+ *
+ * Boot time test to enable SCSI bus reset (defaults to not allowing reset).
+ *
+ * Fix test for OGM busy -- the busy bit is in different places on the 24F.
+ *
+ * Release ICM slot by clearing first byte on 24F.
+ */
+
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/interrupt.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+
+#define ULTRASTOR_PRIVATE	/* Get the private stuff from ultrastor.h */
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "ultrastor.h"
+
+#define FALSE 0
+#define TRUE 1
+
+#ifndef ULTRASTOR_DEBUG
+#define ULTRASTOR_DEBUG (UD_ABORT|UD_CSIR|UD_RESET)
+#endif
+
+#define VERSION "1.12"
+
+#define PACKED		__attribute__((packed))
+#define ALIGNED(x)	__attribute__((aligned(x)))
+
+
+/* The 14F uses an array of 4-byte ints for its scatter/gather list.
+   The data can be unaligned, but need not be.  It's easier to give
+   the list normal alignment since it doesn't need to fit into a
+   packed structure.  */
+
+typedef struct {
+  u32 address;
+  u32 num_bytes;
+} ultrastor_sg_list;
+
+
+/* MailBox SCSI Command Packet.  Basic command structure for communicating
+   with controller. */
+struct mscp {
+  unsigned char opcode: 3;		/* type of command */
+  unsigned char xdir: 2;		/* data transfer direction */
+  unsigned char dcn: 1;		/* disable disconnect */
+  unsigned char ca: 1;		/* use cache (if available) */
+  unsigned char sg: 1;		/* scatter/gather operation */
+  unsigned char target_id: 3;		/* target SCSI id */
+  unsigned char ch_no: 2;		/* SCSI channel (always 0 for 14f) */
+  unsigned char lun: 3;		/* logical unit number */
+  unsigned int transfer_data PACKED;	/* transfer data pointer */
+  unsigned int transfer_data_length PACKED;	/* length in bytes */
+  unsigned int command_link PACKED;	/* for linking command chains */
+  unsigned char scsi_command_link_id;	/* identifies command in chain */
+  unsigned char number_of_sg_list;	/* (if sg is set) 8 bytes per list */
+  unsigned char length_of_sense_byte;
+  unsigned char length_of_scsi_cdbs;	/* 6, 10, or 12 */
+  unsigned char scsi_cdbs[12];	/* SCSI commands */
+  unsigned char adapter_status;	/* non-zero indicates HA error */
+  unsigned char target_status;	/* non-zero indicates target error */
+  u32 sense_data PACKED;
+  /* The following fields are for software only.  They are included in
+     the MSCP structure because they are associated with SCSI requests.  */
+  void (*done)(Scsi_Cmnd *);
+  Scsi_Cmnd *SCint;
+  ultrastor_sg_list sglist[ULTRASTOR_24F_MAX_SG]; /* use larger size for 24F */
+};
+
+
+/* Port addresses (relative to the base address) */
+#define U14F_PRODUCT_ID(port) ((port) + 0x4)
+#define CONFIG(port) ((port) + 0x6)
+
+/* Port addresses relative to the doorbell base address.  */
+#define LCL_DOORBELL_MASK(port) ((port) + 0x0)
+#define LCL_DOORBELL_INTR(port) ((port) + 0x1)
+#define SYS_DOORBELL_MASK(port) ((port) + 0x2)
+#define SYS_DOORBELL_INTR(port) ((port) + 0x3)
+
+
+/* Used to store configuration info read from config i/o registers.  Most of
+   this is not used yet, but might as well save it.
+   
+   This structure also holds port addresses that are not at the same offset
+   on the 14F and 24F.
+   
+   This structure holds all data that must be duplicated to support multiple
+   adapters.  */
+
+static struct ultrastor_config
+{
+  unsigned short port_address;		/* base address of card */
+  unsigned short doorbell_address;	/* base address of doorbell CSRs */
+  unsigned short ogm_address;		/* base address of OGM */
+  unsigned short icm_address;		/* base address of ICM */
+  const void *bios_segment;
+  unsigned char interrupt: 4;
+  unsigned char dma_channel: 3;
+  unsigned char bios_drive_number: 1;
+  unsigned char heads;
+  unsigned char sectors;
+  unsigned char ha_scsi_id: 3;
+  unsigned char subversion: 4;
+  unsigned char revision;
+  /* The slot number is used to distinguish the 24F (slot != 0) from
+     the 14F and 34F (slot == 0). */
+  unsigned char slot;
+
+#ifdef PRINT_U24F_VERSION
+  volatile int csir_done;
+#endif
+
+  /* A pool of MSCP structures for this adapter, and a bitmask of
+     busy structures.  (If ULTRASTOR_14F_MAX_CMDS == 1, a 1 byte
+     busy flag is used instead.)  */
+
+#if ULTRASTOR_MAX_CMDS == 1
+  unsigned char mscp_busy;
+#else
+  unsigned long mscp_free;
+#endif
+  volatile unsigned char aborted[ULTRASTOR_MAX_CMDS];
+  struct mscp mscp[ULTRASTOR_MAX_CMDS];
+} config = {0};
+
+/* Set this to 1 to reset the SCSI bus on error.  */
+static int ultrastor_bus_reset;
+
+
+/* Allowed BIOS base addresses (NULL indicates reserved) */
+static const void *const bios_segment_table[8] = {
+  NULL,	     (void *)0xC4000, (void *)0xC8000, (void *)0xCC000,
+  (void *)0xD0000, (void *)0xD4000, (void *)0xD8000, (void *)0xDC000,
+};
+
+/* Allowed IRQs for 14f */
+static const unsigned char interrupt_table_14f[4] = { 15, 14, 11, 10 };
+
+/* Allowed DMA channels for 14f (0 indicates reserved) */
+static const unsigned char dma_channel_table_14f[4] = { 5, 6, 7, 0 };
+
+/* Head/sector mappings allowed by 14f */
+static const struct {
+  unsigned char heads;
+  unsigned char sectors;
+} mapping_table[4] = { { 16, 63 }, { 64, 32 }, { 64, 63 }, { 64, 32 } };
+
+#ifndef PORT_OVERRIDE
+/* ??? A probe of address 0x310 screws up NE2000 cards */
+static const unsigned short ultrastor_ports_14f[] = {
+  0x330, 0x340, /*0x310,*/ 0x230, 0x240, 0x210, 0x130, 0x140,
+};
+#endif
+
+static void ultrastor_interrupt(int, void *, struct pt_regs *);
+static irqreturn_t do_ultrastor_interrupt(int, void *, struct pt_regs *);
+static inline void build_sg_list(struct mscp *, Scsi_Cmnd *SCpnt);
+
+
+/* Always called with host lock held */
+
+static inline int find_and_clear_bit_16(unsigned long *field)
+{
+  int rv;
+
+  if (*field == 0) panic("No free mscp");
+  asm("xorl %0,%0\n0:\tbsfw %1,%w0\n\tbtr %0,%1\n\tjnc 0b"
+      : "=&r" (rv), "=m" (*field) : "1" (*field));
+  return rv;
+}
+
+/* This has been re-implemented with the help of Richard Earnshaw,
+   <rwe@pegasus.esprit.ec.org> and works with gcc-2.5.8 and gcc-2.6.0.
+   The instability noted by jfc below appears to be a bug in
+   gcc-2.5.x when compiling w/o optimization.  --Caleb
+
+   This asm is fragile: it doesn't work without the casts and it may
+   not work without optimization.  Maybe I should add a swap builtin
+   to gcc.  --jfc  */
+static inline unsigned char xchgb(unsigned char reg,
+				  volatile unsigned char *mem)
+{
+  __asm__ ("xchgb %0,%1" : "=q" (reg), "=m" (*mem) : "0" (reg));
+  return reg;
+}
+
+#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
+
+/* Always called with the host lock held */
+static void log_ultrastor_abort(struct ultrastor_config *config,
+				int command)
+{
+  static char fmt[80] = "abort %d (%x); MSCP free pool: %x;";
+  int i;
+
+  for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
+    {
+      fmt[20 + i*2] = ' ';
+      if (! (config->mscp_free & (1 << i)))
+	fmt[21 + i*2] = '0' + config->mscp[i].target_id;
+      else
+	fmt[21 + i*2] = '-';
+    }
+  fmt[20 + ULTRASTOR_MAX_CMDS * 2] = '\n';
+  fmt[21 + ULTRASTOR_MAX_CMDS * 2] = 0;
+  printk(fmt, command, &config->mscp[command], config->mscp_free);
+
+}
+#endif
+
+static int ultrastor_14f_detect(Scsi_Host_Template * tpnt)
+{
+    size_t i;
+    unsigned char in_byte, version_byte = 0;
+    struct config_1 {
+      unsigned char bios_segment: 3;
+      unsigned char removable_disks_as_fixed: 1;
+      unsigned char interrupt: 2;
+    unsigned char dma_channel: 2;
+    } config_1;
+    struct config_2 {
+      unsigned char ha_scsi_id: 3;
+      unsigned char mapping_mode: 2;
+      unsigned char bios_drive_number: 1;
+      unsigned char tfr_port: 2;
+    } config_2;
+
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+    printk("US14F: detect: called\n");
+#endif
+
+    /* If a 24F has already been configured, don't look for a 14F.  */
+    if (config.bios_segment)
+	return FALSE;
+
+#ifdef PORT_OVERRIDE
+    if(!request_region(PORT_OVERRIDE, 0xc, "ultrastor")) {
+      printk("Ultrastor I/O space already in use\n");
+      return FALSE;
+    };
+    config.port_address = PORT_OVERRIDE;
+#else
+    for (i = 0; i < ARRAY_SIZE(ultrastor_ports_14f); i++) {
+      if(!request_region(ultrastor_ports_14f[i], 0x0c, "ultrastor")) continue;
+      config.port_address = ultrastor_ports_14f[i];
+#endif
+
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+	printk("US14F: detect: testing port address %03X\n", config.port_address);
+#endif
+
+	in_byte = inb(U14F_PRODUCT_ID(config.port_address));
+	if (in_byte != US14F_PRODUCT_ID_0) {
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+# ifdef PORT_OVERRIDE
+	    printk("US14F: detect: wrong product ID 0 - %02X\n", in_byte);
+# else
+	    printk("US14F: detect: no adapter at port %03X\n", config.port_address);
+# endif
+#endif
+#ifdef PORT_OVERRIDE
+	    goto out_release_port;
+#else
+	    release_region(config.port_address, 0x0c);
+	    continue;
+#endif
+	}
+	in_byte = inb(U14F_PRODUCT_ID(config.port_address) + 1);
+	/* Only upper nibble is significant for Product ID 1 */
+	if ((in_byte & 0xF0) != US14F_PRODUCT_ID_1) {
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+# ifdef PORT_OVERRIDE
+	    printk("US14F: detect: wrong product ID 1 - %02X\n", in_byte);
+# else
+	    printk("US14F: detect: no adapter at port %03X\n", config.port_address);
+# endif
+#endif
+#ifdef PORT_OVERRIDE
+	    goto out_release_port;
+#else
+	    release_region(config.port_address, 0x0c);
+	    continue;
+#endif
+	}
+	version_byte = in_byte;
+#ifndef PORT_OVERRIDE
+	break;
+    }
+    if (i == ARRAY_SIZE(ultrastor_ports_14f)) {
+# if (ULTRASTOR_DEBUG & UD_DETECT)
+	printk("US14F: detect: no port address found!\n");
+# endif
+	/* all ports probed already released - we can just go straight out */
+	return FALSE;
+    }
+#endif
+
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+    printk("US14F: detect: adapter found at port address %03X\n",
+	   config.port_address);
+#endif
+
+    /* Set local doorbell mask to disallow bus reset unless
+       ultrastor_bus_reset is true.  */
+    outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(config.port_address));
+
+    /* All above tests passed, must be the right thing.  Get some useful
+       info. */
+
+    /* Register the I/O space that we use */
+
+    *(char *)&config_1 = inb(CONFIG(config.port_address + 0));
+    *(char *)&config_2 = inb(CONFIG(config.port_address + 1));
+    config.bios_segment = bios_segment_table[config_1.bios_segment];
+    config.doorbell_address = config.port_address;
+    config.ogm_address = config.port_address + 0x8;
+    config.icm_address = config.port_address + 0xC;
+    config.interrupt = interrupt_table_14f[config_1.interrupt];
+    config.ha_scsi_id = config_2.ha_scsi_id;
+    config.heads = mapping_table[config_2.mapping_mode].heads;
+    config.sectors = mapping_table[config_2.mapping_mode].sectors;
+    config.bios_drive_number = config_2.bios_drive_number;
+    config.subversion = (version_byte & 0x0F);
+    if (config.subversion == U34F)
+	config.dma_channel = 0;
+    else
+	config.dma_channel = dma_channel_table_14f[config_1.dma_channel];
+
+    if (!config.bios_segment) {
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+	printk("US14F: detect: not detected.\n");
+#endif
+	goto out_release_port;
+    }
+
+    /* Final consistency check, verify previous info. */
+    if (config.subversion != U34F)
+	if (!config.dma_channel || !(config_2.tfr_port & 0x2)) {
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+	    printk("US14F: detect: consistency check failed\n");
+#endif
+           goto out_release_port;
+	}
+
+    /* If we were TRULY paranoid, we could issue a host adapter inquiry
+       command here and verify the data returned.  But frankly, I'm
+       exhausted! */
+
+    /* Finally!  Now I'm satisfied... */
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+    printk("US14F: detect: detect succeeded\n"
+	   "  Port address: %03X\n"
+	   "  BIOS segment: %05X\n"
+	   "  Interrupt: %u\n"
+	   "  DMA channel: %u\n"
+	   "  H/A SCSI ID: %u\n"
+	   "  Subversion: %u\n",
+	   config.port_address, config.bios_segment, config.interrupt,
+	   config.dma_channel, config.ha_scsi_id, config.subversion);
+#endif
+    tpnt->this_id = config.ha_scsi_id;
+    tpnt->unchecked_isa_dma = (config.subversion != U34F);
+
+#if ULTRASTOR_MAX_CMDS > 1
+    config.mscp_free = ~0;
+#endif
+
+    /*
+     * Brrr, &config.mscp[0].SCint->host) it is something magical....
+     * XXX and FIXME
+     */
+    if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", &config.mscp[0].SCint->device->host)) {
+	printk("Unable to allocate IRQ%u for UltraStor controller.\n",
+	       config.interrupt);
+	goto out_release_port;
+    }
+    if (config.dma_channel && request_dma(config.dma_channel,"Ultrastor")) {
+	printk("Unable to allocate DMA channel %u for UltraStor controller.\n",
+	       config.dma_channel);
+	free_irq(config.interrupt, NULL);
+	goto out_release_port;
+    }
+    tpnt->sg_tablesize = ULTRASTOR_14F_MAX_SG;
+    printk("UltraStor driver version" VERSION ".  Using %d SG lists.\n",
+	   ULTRASTOR_14F_MAX_SG);
+
+    return TRUE;
+out_release_port:
+    release_region(config.port_address, 0x0c);
+    return FALSE;
+}
+
+static int ultrastor_24f_detect(Scsi_Host_Template * tpnt)
+{
+  int i;
+  struct Scsi_Host * shpnt = NULL;
+
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+  printk("US24F: detect");
+#endif
+
+  /* probe each EISA slot at slot address C80 */
+  for (i = 1; i < 15; i++)
+    {
+      unsigned char config_1, config_2;
+      unsigned short addr = (i << 12) | ULTRASTOR_24F_PORT;
+
+      if (inb(addr) != US24F_PRODUCT_ID_0 &&
+	  inb(addr+1) != US24F_PRODUCT_ID_1 &&
+	  inb(addr+2) != US24F_PRODUCT_ID_2)
+	continue;
+
+      config.revision = inb(addr+3);
+      config.slot = i;
+      if (! (inb(addr+4) & 1))
+	{
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+	  printk("U24F: found disabled card in slot %u\n", i);
+#endif
+	  continue;
+	}
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+      printk("U24F: found card in slot %u\n", i);
+#endif
+      config_1 = inb(addr + 5);
+      config.bios_segment = bios_segment_table[config_1 & 7];
+      switch(config_1 >> 4)
+	{
+	case 1:
+	  config.interrupt = 15;
+	  break;
+	case 2:
+	  config.interrupt = 14;
+	  break;
+	case 4:
+	  config.interrupt = 11;
+	  break;
+	case 8:
+	  config.interrupt = 10;
+	  break;
+	default:
+	  printk("U24F: invalid IRQ\n");
+	  return FALSE;
+	}
+
+      /* BIOS addr set */
+      /* base port set */
+      config.port_address = addr;
+      config.doorbell_address = addr + 12;
+      config.ogm_address = addr + 0x17;
+      config.icm_address = addr + 0x1C;
+      config_2 = inb(addr + 7);
+      config.ha_scsi_id = config_2 & 7;
+      config.heads = mapping_table[(config_2 >> 3) & 3].heads;
+      config.sectors = mapping_table[(config_2 >> 3) & 3].sectors;
+#if (ULTRASTOR_DEBUG & UD_DETECT)
+      printk("US24F: detect: detect succeeded\n"
+	     "  Port address: %03X\n"
+	     "  BIOS segment: %05X\n"
+	     "  Interrupt: %u\n"
+	     "  H/A SCSI ID: %u\n",
+	     config.port_address, config.bios_segment,
+	     config.interrupt, config.ha_scsi_id);
+#endif
+      tpnt->this_id = config.ha_scsi_id;
+      tpnt->unchecked_isa_dma = 0;
+      tpnt->sg_tablesize = ULTRASTOR_24F_MAX_SG;
+
+      shpnt = scsi_register(tpnt, 0);
+      if (!shpnt) {
+             printk(KERN_WARNING "(ultrastor:) Could not register scsi device. Aborting registration.\n");
+             free_irq(config.interrupt, do_ultrastor_interrupt);
+             return FALSE;
+      }
+      
+      if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", shpnt))
+	{
+	  printk("Unable to allocate IRQ%u for UltraStor controller.\n",
+		 config.interrupt);
+	  return FALSE;
+	}
+
+      shpnt->irq = config.interrupt;
+      shpnt->dma_channel = config.dma_channel;
+      shpnt->io_port = config.port_address;
+
+#if ULTRASTOR_MAX_CMDS > 1
+      config.mscp_free = ~0;
+#endif
+      /* Mark ICM and OGM free */
+      outb(0, addr + 0x16);
+      outb(0, addr + 0x1B);
+
+      /* Set local doorbell mask to disallow bus reset unless
+	 ultrastor_bus_reset is true.  */
+      outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(addr+12));
+      outb(0x02, SYS_DOORBELL_MASK(addr+12));
+      printk("UltraStor driver version " VERSION ".  Using %d SG lists.\n",
+	     tpnt->sg_tablesize);
+      return TRUE;
+    }
+  return FALSE;
+}
+
+static int ultrastor_detect(Scsi_Host_Template * tpnt)
+{
+	tpnt->proc_name = "ultrastor";
+	return ultrastor_14f_detect(tpnt) || ultrastor_24f_detect(tpnt);
+}
+
+static int ultrastor_release(struct Scsi_Host *shost)
+{
+	if (shost->irq)
+		free_irq(shost->irq, NULL);
+	if (shost->dma_channel != 0xff)
+		free_dma(shost->dma_channel);
+	if (shost->io_port && shost->n_io_port)
+		release_region(shost->io_port, shost->n_io_port);
+	scsi_unregister(shost);
+	return 0;
+}
+
+static const char *ultrastor_info(struct Scsi_Host * shpnt)
+{
+    static char buf[64];
+
+    if (config.slot)
+      sprintf(buf, "UltraStor 24F SCSI @ Slot %u IRQ%u",
+	      config.slot, config.interrupt);
+    else if (config.subversion)
+      sprintf(buf, "UltraStor 34F SCSI @ Port %03X BIOS %05X IRQ%u",
+	      config.port_address, (int)config.bios_segment,
+	      config.interrupt);
+    else
+      sprintf(buf, "UltraStor 14F SCSI @ Port %03X BIOS %05X IRQ%u DMA%u",
+	      config.port_address, (int)config.bios_segment,
+	      config.interrupt, config.dma_channel);
+    return buf;
+}
+
+static inline void build_sg_list(struct mscp *mscp, Scsi_Cmnd *SCpnt)
+{
+	struct scatterlist *sl;
+	long transfer_length = 0;
+	int i, max;
+
+	sl = (struct scatterlist *) SCpnt->request_buffer;
+	max = SCpnt->use_sg;
+	for (i = 0; i < max; i++) {
+		mscp->sglist[i].address = isa_page_to_bus(sl[i].page) + sl[i].offset;
+		mscp->sglist[i].num_bytes = sl[i].length;
+		transfer_length += sl[i].length;
+	}
+	mscp->number_of_sg_list = max;
+	mscp->transfer_data = isa_virt_to_bus(mscp->sglist);
+	/* ??? May not be necessary.  Docs are unclear as to whether transfer
+	   length field is ignored or whether it should be set to the total
+	   number of bytes of the transfer.  */
+	mscp->transfer_data_length = transfer_length;
+}
+
+static int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+{
+    struct mscp *my_mscp;
+#if ULTRASTOR_MAX_CMDS > 1
+    int mscp_index;
+#endif
+    unsigned int status;
+
+    /* Next test is for debugging; "can't happen" */
+    if ((config.mscp_free & ((1U << ULTRASTOR_MAX_CMDS) - 1)) == 0)
+	panic("ultrastor_queuecommand: no free MSCP\n");
+    mscp_index = find_and_clear_bit_16(&config.mscp_free);
+
+    /* Has the command been aborted?  */
+    if (xchgb(0xff, &config.aborted[mscp_index]) != 0)
+      {
+	status = DID_ABORT << 16;
+	goto aborted;
+      }
+
+    my_mscp = &config.mscp[mscp_index];
+
+    *(unsigned char *)my_mscp = OP_SCSI | (DTD_SCSI << 3);
+
+    /* Tape drives don't work properly if the cache is used.  The SCSI
+       READ command for a tape doesn't have a block offset, and the adapter
+       incorrectly assumes that all reads from the tape read the same
+       blocks.  Results will depend on read buffer size and other disk
+       activity. 
+
+       ???  Which other device types should never use the cache?   */
+    my_mscp->ca = SCpnt->device->type != TYPE_TAPE;
+    my_mscp->target_id = SCpnt->device->id;
+    my_mscp->ch_no = 0;
+    my_mscp->lun = SCpnt->device->lun;
+    if (SCpnt->use_sg) {
+	/* Set scatter/gather flag in SCSI command packet */
+	my_mscp->sg = TRUE;
+	build_sg_list(my_mscp, SCpnt);
+    } else {
+	/* Unset scatter/gather flag in SCSI command packet */
+	my_mscp->sg = FALSE;
+	my_mscp->transfer_data = isa_virt_to_bus(SCpnt->request_buffer);
+	my_mscp->transfer_data_length = SCpnt->request_bufflen;
+    }
+    my_mscp->command_link = 0;		/*???*/
+    my_mscp->scsi_command_link_id = 0;	/*???*/
+    my_mscp->length_of_sense_byte = sizeof SCpnt->sense_buffer;
+    my_mscp->length_of_scsi_cdbs = SCpnt->cmd_len;
+    memcpy(my_mscp->scsi_cdbs, SCpnt->cmnd, my_mscp->length_of_scsi_cdbs);
+    my_mscp->adapter_status = 0;
+    my_mscp->target_status = 0;
+    my_mscp->sense_data = isa_virt_to_bus(&SCpnt->sense_buffer);
+    my_mscp->done = done;
+    my_mscp->SCint = SCpnt;
+    SCpnt->host_scribble = (unsigned char *)my_mscp;
+
+    /* Find free OGM slot.  On 24F, look for OGM status byte == 0.
+       On 14F and 34F, wait for local interrupt pending flag to clear. 
+       
+       FIXME: now we are using new_eh we should punt here and let the
+       midlayer sort it out */
+
+retry:
+    if (config.slot)
+	while (inb(config.ogm_address - 1) != 0 && config.aborted[mscp_index] == 0xff)
+		barrier();
+
+    /* else??? */
+
+    while ((inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1))  && config.aborted[mscp_index] == 0xff)
+    	barrier();
+
+    /* To avoid race conditions, keep the code to write to the adapter
+       atomic.  This simplifies the abort code.  Right now the
+       scsi mid layer has the host_lock already held
+     */
+
+    if (inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1))
+      goto retry;
+
+    status = xchgb(0, &config.aborted[mscp_index]);
+    if (status != 0xff) {
+
+#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
+	printk("USx4F: queuecommand: aborted\n");
+#if ULTRASTOR_MAX_CMDS > 1
+	log_ultrastor_abort(&config, mscp_index);
+#endif
+#endif
+	status <<= 16;
+
+      aborted:
+	set_bit(mscp_index, &config.mscp_free);
+	/* If the driver queues commands, call the done proc here.  Otherwise
+	   return an error.  */
+#if ULTRASTOR_MAX_CMDS > 1
+	SCpnt->result = status;
+	done(SCpnt);
+	return 0;
+#else
+	return status;
+#endif
+    }
+
+    /* Store pointer in OGM address bytes */
+    outl(isa_virt_to_bus(my_mscp), config.ogm_address);
+
+    /* Issue OGM interrupt */
+    if (config.slot) {
+	/* Write OGM command register on 24F */
+	outb(1, config.ogm_address - 1);
+	outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
+    } else {
+	outb(0x1, LCL_DOORBELL_INTR(config.doorbell_address));
+    }
+
+#if (ULTRASTOR_DEBUG & UD_COMMAND)
+    printk("USx4F: queuecommand: returning\n");
+#endif
+
+    return 0;
+}
+
+/* This code must deal with 2 cases:
+
+   1. The command has not been written to the OGM.  In this case, set
+   the abort flag and return.
+
+   2. The command has been written to the OGM and is stuck somewhere in
+   the adapter.
+
+   2a.  On a 24F, ask the adapter to abort the command.  It will interrupt
+   when it does.
+
+   2b.  Call the command's done procedure.
+
+ */
+
+static int ultrastor_abort(Scsi_Cmnd *SCpnt)
+{
+#if ULTRASTOR_DEBUG & UD_ABORT
+    char out[108];
+    unsigned char icm_status = 0, ogm_status = 0;
+    unsigned int icm_addr = 0, ogm_addr = 0;
+#endif
+    unsigned int mscp_index;
+    unsigned char old_aborted;
+    unsigned long flags;
+    void (*done)(Scsi_Cmnd *);
+    struct Scsi_Host *host = SCpnt->device->host;
+
+    if(config.slot) 
+      return FAILED;  /* Do not attempt an abort for the 24f */
+      
+    /* Simple consistency checking */
+    if(!SCpnt->host_scribble)
+      return FAILED;
+
+    mscp_index = ((struct mscp *)SCpnt->host_scribble) - config.mscp;
+    if (mscp_index >= ULTRASTOR_MAX_CMDS)
+	panic("Ux4F aborting invalid MSCP");
+
+#if ULTRASTOR_DEBUG & UD_ABORT
+    if (config.slot)
+      {
+	int port0 = (config.slot << 12) | 0xc80;
+	int i;
+	unsigned long flags;
+	
+	spin_lock_irqsave(host->host_lock, flags);
+	strcpy(out, "OGM %d:%x ICM %d:%x ports:  ");
+	for (i = 0; i < 16; i++)
+	  {
+	    unsigned char p = inb(port0 + i);
+	    out[28 + i * 3] = "0123456789abcdef"[p >> 4];
+	    out[29 + i * 3] = "0123456789abcdef"[p & 15];
+	    out[30 + i * 3] = ' ';
+	  }
+	out[28 + i * 3] = '\n';
+	out[29 + i * 3] = 0;
+	ogm_status = inb(port0 + 22);
+	ogm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 23));
+	icm_status = inb(port0 + 27);
+	icm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 28));
+	spin_lock_irqsave(host->host_lock, flags);
+      }
+
+    /* First check to see if an interrupt is pending.  I suspect the SiS
+       chipset loses interrupts.  (I also suspect is mangles data, but
+       one bug at a time... */
+    if (config.slot ? inb(config.icm_address - 1) == 2 :
+	(inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
+      {
+	printk("Ux4F: abort while completed command pending\n");
+	
+	spin_lock_irqsave(host->host_lock, flags);
+	/* FIXME: Ewww... need to think about passing host around properly */
+	ultrastor_interrupt(0, NULL, NULL);
+	spin_unlock_irqrestore(host->host_lock, flags);
+	return SUCCESS;
+      }
+#endif
+
+    old_aborted = xchgb(DID_ABORT, &config.aborted[mscp_index]);
+
+    /* aborted == 0xff is the signal that queuecommand has not yet sent
+       the command.  It will notice the new abort flag and fail.  */
+    if (old_aborted == 0xff)
+	return SUCCESS;
+
+    /* On 24F, send an abort MSCP request.  The adapter will interrupt
+       and the interrupt handler will call done.  */
+    if (config.slot && inb(config.ogm_address - 1) == 0)
+      {
+	unsigned long flags;
+
+	spin_lock_irqsave(host->host_lock, flags);
+	outl(isa_virt_to_bus(&config.mscp[mscp_index]), config.ogm_address);
+	udelay(8);
+	outb(0x80, config.ogm_address - 1);
+	outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
+#if ULTRASTOR_DEBUG & UD_ABORT
+	log_ultrastor_abort(&config, mscp_index);
+	printk(out, ogm_status, ogm_addr, icm_status, icm_addr);
+#endif
+	spin_unlock_irqrestore(host->host_lock, flags);
+	/* FIXME: add a wait for the abort to complete */
+	return SUCCESS;
+      }
+
+#if ULTRASTOR_DEBUG & UD_ABORT
+    log_ultrastor_abort(&config, mscp_index);
+#endif
+
+    /* Can't request a graceful abort.  Either this is not a 24F or
+       the OGM is busy.  Don't free the command -- the adapter might
+       still be using it.  Setting SCint = 0 causes the interrupt
+       handler to ignore the command.  */
+
+    /* FIXME - devices that implement soft resets will still be running
+       the command after a bus reset.  We would probably rather leave
+       the command in the queue.  The upper level code will automatically
+       leave the command in the active state instead of requeueing it. ERY */
+
+#if ULTRASTOR_DEBUG & UD_ABORT
+    if (config.mscp[mscp_index].SCint != SCpnt)
+	printk("abort: command mismatch, %p != %p\n",
+	       config.mscp[mscp_index].SCint, SCpnt);
+#endif
+    if (config.mscp[mscp_index].SCint == 0)
+	return SCSI_ABORT_NOT_RUNNING;
+
+    if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort");
+    config.mscp[mscp_index].SCint = NULL;
+    done = config.mscp[mscp_index].done;
+    config.mscp[mscp_index].done = NULL;
+    SCpnt->result = DID_ABORT << 16;
+    
+    /* Take the host lock to guard against scsi layer re-entry */
+    spin_lock_irqsave(host->host_lock, flags);
+    done(SCpnt);
+    spin_unlock_irqrestore(host->host_lock, flags);
+
+    /* Need to set a timeout here in case command never completes.  */
+    return SUCCESS;
+}
+
+static int ultrastor_host_reset(Scsi_Cmnd * SCpnt)
+{
+    unsigned long flags;
+    int i;
+    struct Scsi_Host *host = SCpnt->device->host;
+    
+#if (ULTRASTOR_DEBUG & UD_RESET)
+    printk("US14F: reset: called\n");
+#endif
+
+    if(config.slot)
+    	return FAILED;
+
+    spin_lock_irqsave(host->host_lock, flags);
+    /* Reset the adapter and SCSI bus.  The SCSI bus reset can be
+       inhibited by clearing ultrastor_bus_reset before probe.  */
+    outb(0xc0, LCL_DOORBELL_INTR(config.doorbell_address));
+    if (config.slot)
+      {
+	outb(0, config.ogm_address - 1);
+	outb(0, config.icm_address - 1);
+      }
+
+#if ULTRASTOR_MAX_CMDS == 1
+    if (config.mscp_busy && config.mscp->done && config.mscp->SCint)
+      {
+	config.mscp->SCint->result = DID_RESET << 16;
+	config.mscp->done(config.mscp->SCint);
+      }
+    config.mscp->SCint = 0;
+#else
+    for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
+      {
+	if (! (config.mscp_free & (1 << i)) &&
+	    config.mscp[i].done && config.mscp[i].SCint)
+	  {
+	    config.mscp[i].SCint->result = DID_RESET << 16;
+	    config.mscp[i].done(config.mscp[i].SCint);
+	    config.mscp[i].done = NULL;
+	  }
+	config.mscp[i].SCint = NULL;
+      }
+#endif
+
+    /* FIXME - if the device implements soft resets, then the command
+       will still be running.  ERY  
+       
+       Even bigger deal with new_eh! 
+     */
+
+    memset((unsigned char *)config.aborted, 0, sizeof config.aborted);
+#if ULTRASTOR_MAX_CMDS == 1
+    config.mscp_busy = 0;
+#else
+    config.mscp_free = ~0;
+#endif
+
+    spin_unlock_irqrestore(host->host_lock, flags);
+    return SCSI_RESET_SUCCESS;
+
+}
+
+int ultrastor_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+		sector_t capacity, int * dkinfo)
+{
+    int size = capacity;
+    unsigned int s = config.heads * config.sectors;
+
+    dkinfo[0] = config.heads;
+    dkinfo[1] = config.sectors;
+    dkinfo[2] = size / s;	/* Ignore partial cylinders */
+#if 0
+    if (dkinfo[2] > 1024)
+	dkinfo[2] = 1024;
+#endif
+    return 0;
+}
+
+static void ultrastor_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+    unsigned int status;
+#if ULTRASTOR_MAX_CMDS > 1
+    unsigned int mscp_index;
+#endif
+    struct mscp *mscp;
+    void (*done)(Scsi_Cmnd *);
+    Scsi_Cmnd *SCtmp;
+
+#if ULTRASTOR_MAX_CMDS == 1
+    mscp = &config.mscp[0];
+#else
+    mscp = (struct mscp *)isa_bus_to_virt(inl(config.icm_address));
+    mscp_index = mscp - config.mscp;
+    if (mscp_index >= ULTRASTOR_MAX_CMDS) {
+	printk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp);
+	/* A command has been lost.  Reset and report an error
+	   for all commands.  */
+	ultrastor_host_reset(dev_id);
+	return;
+    }
+#endif
+
+    /* Clean ICM slot (set ICMINT bit to 0) */
+    if (config.slot) {
+	unsigned char icm_status = inb(config.icm_address - 1);
+#if ULTRASTOR_DEBUG & (UD_INTERRUPT|UD_ERROR|UD_ABORT)
+	if (icm_status != 1 && icm_status != 2)
+	    printk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status,
+		   mscp_index, (unsigned int) mscp);
+#endif
+	/* The manual says clear interrupt then write 0 to ICM status.
+	   This seems backwards, but I'll do it anyway.  --jfc */
+	outb(2, SYS_DOORBELL_INTR(config.doorbell_address));
+	outb(0, config.icm_address - 1);
+	if (icm_status == 4) {
+	    printk("UltraStor abort command failed\n");
+	    return;
+	}
+	if (icm_status == 3) {
+	    void (*done)(Scsi_Cmnd *) = mscp->done;
+	    if (done) {
+		mscp->done = NULL;
+		mscp->SCint->result = DID_ABORT << 16;
+		done(mscp->SCint);
+	    }
+	    return;
+	}
+    } else {
+	outb(1, SYS_DOORBELL_INTR(config.doorbell_address));
+    }
+
+    SCtmp = mscp->SCint;
+    mscp->SCint = NULL;
+
+    if (SCtmp == 0)
+      {
+#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
+	printk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp);
+#endif	
+#if ULTRASTOR_MAX_CMDS == 1
+	config.mscp_busy = FALSE;
+#else
+	set_bit(mscp_index, &config.mscp_free);
+#endif
+	config.aborted[mscp_index] = 0;
+	return;
+      }
+
+    /* Save done locally and zero before calling.  This is needed as
+       once we call done, we may get another command queued before this
+       interrupt service routine can return. */
+    done = mscp->done;
+    mscp->done = NULL;
+
+    /* Let the higher levels know that we're done */
+    switch (mscp->adapter_status)
+      {
+      case 0:
+	status = DID_OK << 16;
+	break;
+      case 0x01:	/* invalid command */
+      case 0x02:	/* invalid parameters */
+      case 0x03:	/* invalid data list */
+      default:
+	status = DID_ERROR << 16;
+	break;
+      case 0x84:	/* SCSI bus abort */
+	status = DID_ABORT << 16;
+	break;
+      case 0x91:
+	status = DID_TIME_OUT << 16;
+	break;
+      }
+
+    SCtmp->result = status | mscp->target_status;
+
+    SCtmp->host_scribble = NULL;
+
+    /* Free up mscp block for next command */
+#if ULTRASTOR_MAX_CMDS == 1
+    config.mscp_busy = FALSE;
+#else
+    set_bit(mscp_index, &config.mscp_free);
+#endif
+
+#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
+    if (config.aborted[mscp_index])
+	printk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n",
+	       mscp_index, (unsigned int) mscp, config.aborted[mscp_index]);
+#endif
+    config.aborted[mscp_index] = 0;
+
+    if (done)
+	done(SCtmp);
+    else
+	printk("US14F: interrupt: unexpected interrupt\n");
+
+    if (config.slot ? inb(config.icm_address - 1) :
+       (inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
+#if (ULTRASTOR_DEBUG & UD_MULTI_CMD)
+      printk("Ux4F: multiple commands completed\n");
+#else
+      ;
+#endif
+
+#if (ULTRASTOR_DEBUG & UD_INTERRUPT)
+    printk("USx4F: interrupt: returning\n");
+#endif
+}
+
+static irqreturn_t do_ultrastor_interrupt(int irq, void *dev_id,
+						struct pt_regs *regs)
+{
+    unsigned long flags;
+    struct Scsi_Host *dev = dev_id;
+    
+    spin_lock_irqsave(dev->host_lock, flags);
+    ultrastor_interrupt(irq, dev_id, regs);
+    spin_unlock_irqrestore(dev->host_lock, flags);
+    return IRQ_HANDLED;
+}
+
+MODULE_LICENSE("GPL");
+
+static Scsi_Host_Template driver_template = {
+	.name              = "UltraStor 14F/24F/34F",
+	.detect            = ultrastor_detect,
+	.release	   = ultrastor_release,
+	.info              = ultrastor_info,
+	.queuecommand      = ultrastor_queuecommand,
+	.eh_abort_handler  = ultrastor_abort,
+	.eh_host_reset_handler  = ultrastor_host_reset,	
+	.bios_param        = ultrastor_biosparam,
+	.can_queue         = ULTRASTOR_MAX_CMDS,
+	.sg_tablesize      = ULTRASTOR_14F_MAX_SG,
+	.cmd_per_lun       = ULTRASTOR_MAX_CMDS_PER_LUN,
+	.unchecked_isa_dma = 1,
+	.use_clustering    = ENABLE_CLUSTERING,
+};
+#include "scsi_module.c"