Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 348 insertions, 0 deletions

diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h
new file mode 100644
index 00000000000..193ec517d25
--- /dev/null
+++ b/drivers/scsi/wd33c93.h
@@ -0,0 +1,348 @@
+/*
+ *    wd33c93.h -  Linux device driver definitions for the
+ *                 Commodore Amiga A2091/590 SCSI controller card
+ *
+ *    IMPORTANT: This file is for version 1.25 - 09/Jul/1997
+ *
+ * Copyright (c) 1996 John Shifflett, GeoLog Consulting
+ *    john@geolog.com
+ *    jshiffle@netcom.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef WD33C93_H
+#define WD33C93_H
+
+#include <linux/config.h>
+
+#define PROC_INTERFACE     /* add code for /proc/scsi/wd33c93/xxx interface */
+#ifdef  PROC_INTERFACE
+#define PROC_STATISTICS    /* add code for keeping various real time stats */
+#endif
+
+#define SYNC_DEBUG         /* extra info on sync negotiation printed */
+#define DEBUGGING_ON       /* enable command-line debugging bitmask */
+#define DEBUG_DEFAULTS 0   /* default debugging bitmask */
+
+
+#ifdef DEBUGGING_ON
+#define DB(f,a) if (hostdata->args & (f)) a;
+#else
+#define DB(f,a)
+#endif
+
+#define uchar unsigned char
+
+
+/* wd register names */
+#define WD_OWN_ID    0x00
+#define WD_CONTROL      0x01
+#define WD_TIMEOUT_PERIOD  0x02
+#define WD_CDB_1     0x03
+#define WD_CDB_2     0x04
+#define WD_CDB_3     0x05
+#define WD_CDB_4     0x06
+#define WD_CDB_5     0x07
+#define WD_CDB_6     0x08
+#define WD_CDB_7     0x09
+#define WD_CDB_8     0x0a
+#define WD_CDB_9     0x0b
+#define WD_CDB_10    0x0c
+#define WD_CDB_11    0x0d
+#define WD_CDB_12    0x0e
+#define WD_TARGET_LUN      0x0f
+#define WD_COMMAND_PHASE   0x10
+#define WD_SYNCHRONOUS_TRANSFER 0x11
+#define WD_TRANSFER_COUNT_MSB 0x12
+#define WD_TRANSFER_COUNT  0x13
+#define WD_TRANSFER_COUNT_LSB 0x14
+#define WD_DESTINATION_ID  0x15
+#define WD_SOURCE_ID    0x16
+#define WD_SCSI_STATUS     0x17
+#define WD_COMMAND      0x18
+#define WD_DATA      0x19
+#define WD_QUEUE_TAG    0x1a
+#define WD_AUXILIARY_STATUS   0x1f
+
+/* WD commands */
+#define WD_CMD_RESET    0x00
+#define WD_CMD_ABORT    0x01
+#define WD_CMD_ASSERT_ATN  0x02
+#define WD_CMD_NEGATE_ACK  0x03
+#define WD_CMD_DISCONNECT  0x04
+#define WD_CMD_RESELECT    0x05
+#define WD_CMD_SEL_ATN     0x06
+#define WD_CMD_SEL      0x07
+#define WD_CMD_SEL_ATN_XFER   0x08
+#define WD_CMD_SEL_XFER    0x09
+#define WD_CMD_RESEL_RECEIVE  0x0a
+#define WD_CMD_RESEL_SEND  0x0b
+#define WD_CMD_WAIT_SEL_RECEIVE 0x0c
+#define WD_CMD_TRANS_ADDR  0x18
+#define WD_CMD_TRANS_INFO  0x20
+#define WD_CMD_TRANSFER_PAD   0x21
+#define WD_CMD_SBT_MODE    0x80
+
+/* ASR register */
+#define ASR_INT         (0x80)
+#define ASR_LCI         (0x40)
+#define ASR_BSY         (0x20)
+#define ASR_CIP         (0x10)
+#define ASR_PE          (0x02)
+#define ASR_DBR         (0x01)
+
+/* SCSI Bus Phases */
+#define PHS_DATA_OUT    0x00
+#define PHS_DATA_IN     0x01
+#define PHS_COMMAND     0x02
+#define PHS_STATUS      0x03
+#define PHS_MESS_OUT    0x06
+#define PHS_MESS_IN     0x07
+
+/* Command Status Register definitions */
+
+  /* reset state interrupts */
+#define CSR_RESET    0x00
+#define CSR_RESET_AF    0x01
+
+  /* successful completion interrupts */
+#define CSR_RESELECT    0x10
+#define CSR_SELECT      0x11
+#define CSR_SEL_XFER_DONE  0x16
+#define CSR_XFER_DONE      0x18
+
+  /* paused or aborted interrupts */
+#define CSR_MSGIN    0x20
+#define CSR_SDP         0x21
+#define CSR_SEL_ABORT      0x22
+#define CSR_RESEL_ABORT    0x25
+#define CSR_RESEL_ABORT_AM 0x27
+#define CSR_ABORT    0x28
+
+  /* terminated interrupts */
+#define CSR_INVALID     0x40
+#define CSR_UNEXP_DISC     0x41
+#define CSR_TIMEOUT     0x42
+#define CSR_PARITY      0x43
+#define CSR_PARITY_ATN     0x44
+#define CSR_BAD_STATUS     0x45
+#define CSR_UNEXP    0x48
+
+  /* service required interrupts */
+#define CSR_RESEL    0x80
+#define CSR_RESEL_AM    0x81
+#define CSR_DISC     0x85
+#define CSR_SRV_REQ     0x88
+
+   /* Own ID/CDB Size register */
+#define OWNID_EAF    0x08
+#define OWNID_EHP    0x10
+#define OWNID_RAF    0x20
+#define OWNID_FS_8   0x00
+#define OWNID_FS_12  0x40
+#define OWNID_FS_16  0x80
+
+   /* define these so we don't have to change a2091.c, etc. */
+#define WD33C93_FS_8_10  OWNID_FS_8
+#define WD33C93_FS_12_15 OWNID_FS_12
+#define WD33C93_FS_16_20 OWNID_FS_16
+
+   /* Control register */
+#define CTRL_HSP     0x01
+#define CTRL_HA      0x02
+#define CTRL_IDI     0x04
+#define CTRL_EDI     0x08
+#define CTRL_HHP     0x10
+#define CTRL_POLLED  0x00
+#define CTRL_BURST   0x20
+#define CTRL_BUS     0x40
+#define CTRL_DMA     0x80
+
+   /* Timeout Period register */
+#define TIMEOUT_PERIOD_VALUE  20    /* 20 = 200 ms */
+
+   /* Synchronous Transfer Register */
+#define STR_FSS      0x80
+
+   /* Destination ID register */
+#define DSTID_DPD    0x40
+#define DATA_OUT_DIR 0
+#define DATA_IN_DIR  1
+#define DSTID_SCC    0x80
+
+   /* Source ID register */
+#define SRCID_MASK   0x07
+#define SRCID_SIV    0x08
+#define SRCID_DSP    0x20
+#define SRCID_ES     0x40
+#define SRCID_ER     0x80
+
+   /* This is what the 3393 chip looks like to us */
+typedef struct {
+#ifdef CONFIG_WD33C93_PIO
+   unsigned int   SASR;
+   unsigned int   SCMD;
+#else
+   volatile unsigned char  *SASR;
+   volatile unsigned char  *SCMD;
+#endif
+} wd33c93_regs;
+
+
+typedef int (*dma_setup_t) (struct scsi_cmnd *SCpnt, int dir_in);
+typedef void (*dma_stop_t) (struct Scsi_Host *instance,
+		struct scsi_cmnd *SCpnt, int status);
+
+
+#define ILLEGAL_STATUS_BYTE   0xff
+
+#define DEFAULT_SX_PER   376     /* (ns) fairly safe */
+#define DEFAULT_SX_OFF   0       /* aka async */
+
+#define OPTIMUM_SX_PER   252     /* (ns) best we can do (mult-of-4) */
+#define OPTIMUM_SX_OFF   12      /* size of wd3393 fifo */
+
+struct sx_period {
+   unsigned int   period_ns;
+   uchar          reg_value;
+   };
+
+/* FEF: defines for hostdata->dma_buffer_pool */
+
+#define BUF_CHIP_ALLOCED 0
+#define BUF_SCSI_ALLOCED 1
+
+struct WD33C93_hostdata {
+    struct Scsi_Host *next;
+    wd33c93_regs     regs;
+    spinlock_t       lock;
+    uchar            clock_freq;
+    uchar            chip;             /* what kind of wd33c93? */
+    uchar            microcode;        /* microcode rev */
+    uchar            dma_buffer_pool;  /* FEF: buffer from chip_ram? */
+    int              dma_dir;          /* data transfer dir. */
+    dma_setup_t      dma_setup;
+    dma_stop_t       dma_stop;
+    unsigned int     dma_xfer_mask;
+    uchar            *dma_bounce_buffer;
+    unsigned int     dma_bounce_len;
+    volatile uchar   busy[8];          /* index = target, bit = lun */
+    volatile struct scsi_cmnd *input_Q;       /* commands waiting to be started */
+    volatile struct scsi_cmnd *selecting;     /* trying to select this command */
+    volatile struct scsi_cmnd *connected;     /* currently connected command */
+    volatile struct scsi_cmnd *disconnected_Q;/* commands waiting for reconnect */
+    uchar            state;            /* what we are currently doing */
+    uchar            dma;              /* current state of DMA (on/off) */
+    uchar            level2;           /* extent to which Level-2 commands are used */
+    uchar            disconnect;       /* disconnect/reselect policy */
+    unsigned int     args;             /* set from command-line argument */
+    uchar            incoming_msg[8];  /* filled during message_in phase */
+    int              incoming_ptr;     /* mainly used with EXTENDED messages */
+    uchar            outgoing_msg[8];  /* send this during next message_out */
+    int              outgoing_len;     /* length of outgoing message */
+    unsigned int     default_sx_per;   /* default transfer period for SCSI bus */
+    uchar            sync_xfer[8];     /* sync_xfer reg settings per target */
+    uchar            sync_stat[8];     /* status of sync negotiation per target */
+    uchar            no_sync;          /* bitmask: don't do sync on these targets */
+    uchar            no_dma;           /* set this flag to disable DMA */
+#ifdef PROC_INTERFACE
+    uchar            proc;             /* bitmask: what's in proc output */
+#ifdef PROC_STATISTICS
+    unsigned long    cmd_cnt[8];       /* # of commands issued per target */
+    unsigned long    int_cnt;          /* # of interrupts serviced */
+    unsigned long    pio_cnt;          /* # of pio data transfers */
+    unsigned long    dma_cnt;          /* # of DMA data transfers */
+    unsigned long    disc_allowed_cnt[8]; /* # of disconnects allowed per target */
+    unsigned long    disc_done_cnt[8]; /* # of disconnects done per target*/
+#endif
+#endif
+    };
+
+
+/* defines for hostdata->chip */
+
+#define C_WD33C93       0
+#define C_WD33C93A      1
+#define C_WD33C93B      2
+#define C_UNKNOWN_CHIP  100
+
+/* defines for hostdata->state */
+
+#define S_UNCONNECTED         0
+#define S_SELECTING           1
+#define S_RUNNING_LEVEL2      2
+#define S_CONNECTED           3
+#define S_PRE_TMP_DISC        4
+#define S_PRE_CMP_DISC        5
+
+/* defines for hostdata->dma */
+
+#define D_DMA_OFF          0
+#define D_DMA_RUNNING      1
+
+/* defines for hostdata->level2 */
+/* NOTE: only the first 3 are implemented so far */
+
+#define L2_NONE      1  /* no combination commands - we get lots of ints */
+#define L2_SELECT    2  /* start with SEL_ATN_XFER, but never resume it */
+#define L2_BASIC     3  /* resume after STATUS ints & RDP messages */
+#define L2_DATA      4  /* resume after DATA_IN/OUT ints */
+#define L2_MOST      5  /* resume after anything except a RESELECT int */
+#define L2_RESELECT  6  /* resume after everything, including RESELECT ints */
+#define L2_ALL       7  /* always resume */
+
+/* defines for hostdata->disconnect */
+
+#define DIS_NEVER    0
+#define DIS_ADAPTIVE 1
+#define DIS_ALWAYS   2
+
+/* defines for hostdata->args */
+
+#define DB_TEST1              1<<0
+#define DB_TEST2              1<<1
+#define DB_QUEUE_COMMAND      1<<2
+#define DB_EXECUTE            1<<3
+#define DB_INTR               1<<4
+#define DB_TRANSFER           1<<5
+#define DB_MASK               0x3f
+
+/* defines for hostdata->sync_stat[] */
+
+#define SS_UNSET     0
+#define SS_FIRST     1
+#define SS_WAITING   2
+#define SS_SET       3
+
+/* defines for hostdata->proc */
+
+#define PR_VERSION   1<<0
+#define PR_INFO      1<<1
+#define PR_STATISTICS 1<<2
+#define PR_CONNECTED 1<<3
+#define PR_INPUTQ    1<<4
+#define PR_DISCQ     1<<5
+#define PR_TEST      1<<6
+#define PR_STOP      1<<7
+
+
+void wd33c93_init (struct Scsi_Host *instance, const wd33c93_regs regs,
+         dma_setup_t setup, dma_stop_t stop, int clock_freq);
+int wd33c93_abort (struct scsi_cmnd *cmd);
+int wd33c93_queuecommand (struct scsi_cmnd *cmd,
+		void (*done)(struct scsi_cmnd *));
+void wd33c93_intr (struct Scsi_Host *instance);
+int wd33c93_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
+int wd33c93_host_reset (struct scsi_cmnd *);
+void wd33c93_release(void);
+
+#endif /* WD33C93_H */