Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits)
  serial: apbuart: Fixup apbuart_console_init()
  TTY: Add tty ioctl to figure device node of the system console.
  tty: add 'active' sysfs attribute to tty0 and console device
  drivers: serial: apbuart: Handle OF failures gracefully
  Serial: Avoid unbalanced IRQ wake disable during resume
  tty: fix typos/errors in tty_driver.h comments
  pch_uart : fix warnings for 64bit compile
  8250: fix uninitialized FIFOs
  ip2: fix compiler warning on ip2main_pci_tbl
  specialix: fix compiler warning on specialix_pci_tbl
  rocket: fix compiler warning on rocket_pci_ids
  8250: add a UPIO_DWAPB32 for 32 bit accesses
  8250: use container_of() instead of casting
  serial: omap-serial: Add support for kernel debugger
  serial: fix pch_uart kconfig & build
  drivers: char: hvc: add arm JTAG DCC console support
  RS485 documentation: add 16C950 UART description
  serial: ifx6x60: fix memory leak
  serial: ifx6x60: free IRQ on error
  Serial: EG20T: add PCH_UART driver
  ...

Fixed up conflicts in drivers/serial/apbuart.c with evil merge that
makes the code look fairly sane (unlike either side).

1 files changed, 79 insertions, 30 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index ee74c934de8..b25e6e49053 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -454,21 +454,40 @@ static void tsi_serial_out(struct uart_port *p, int offset, int value)
 		writeb(value, p->membase + offset);
 }
 
+/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
+static inline void dwapb_save_out_value(struct uart_port *p, int offset,
+					int value)
+{
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
+
+	if (offset == UART_LCR)
+		up->lcr = value;
+}
+
+/* Read the IER to ensure any interrupt is cleared before returning from ISR. */
+static inline void dwapb_check_clear_ier(struct uart_port *p, int offset)
+{
+	if (offset == UART_TX || offset == UART_IER)
+		p->serial_in(p, UART_IER);
+}
+
 static void dwapb_serial_out(struct uart_port *p, int offset, int value)
 {
 	int save_offset = offset;
 	offset = map_8250_out_reg(p, offset) << p->regshift;
-	/* Save the LCR value so it can be re-written when a
-	 * Busy Detect interrupt occurs. */
-	if (save_offset == UART_LCR) {
-		struct uart_8250_port *up = (struct uart_8250_port *)p;
-		up->lcr = value;
-	}
+	dwapb_save_out_value(p, save_offset, value);
 	writeb(value, p->membase + offset);
-	/* Read the IER to ensure any interrupt is cleared before
-	 * returning from ISR. */
-	if (save_offset == UART_TX || save_offset == UART_IER)
-		value = p->serial_in(p, UART_IER);
+	dwapb_check_clear_ier(p, save_offset);
+}
+
+static void dwapb32_serial_out(struct uart_port *p, int offset, int value)
+{
+	int save_offset = offset;
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	dwapb_save_out_value(p, save_offset, value);
+	writel(value, p->membase + offset);
+	dwapb_check_clear_ier(p, save_offset);
 }
 
 static unsigned int io_serial_in(struct uart_port *p, int offset)
@@ -485,7 +504,8 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 
 static void set_io_from_upio(struct uart_port *p)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)p;
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
 	switch (p->iotype) {
 	case UPIO_HUB6:
 		p->serial_in = hub6_serial_in;
@@ -518,6 +538,11 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = dwapb_serial_out;
 		break;
 
+	case UPIO_DWAPB32:
+		p->serial_in = mem32_serial_in;
+		p->serial_out = dwapb32_serial_out;
+		break;
+
 	default:
 		p->serial_in = io_serial_in;
 		p->serial_out = io_serial_out;
@@ -536,6 +561,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
 	case UPIO_MEM32:
 	case UPIO_AU:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		p->serial_out(p, offset, value);
 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
 		break;
@@ -1319,7 +1345,8 @@ static inline void __stop_tx(struct uart_8250_port *p)
 
 static void serial8250_stop_tx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	__stop_tx(up);
 
@@ -1336,7 +1363,8 @@ static void transmit_chars(struct uart_8250_port *up);
 
 static void serial8250_start_tx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	if (!(up->ier & UART_IER_THRI)) {
 		up->ier |= UART_IER_THRI;
@@ -1364,7 +1392,8 @@ static void serial8250_start_tx(struct uart_port *port)
 
 static void serial8250_stop_rx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	up->ier &= ~UART_IER_RLSI;
 	up->port.read_status_mask &= ~UART_LSR_DR;
@@ -1373,7 +1402,8 @@ static void serial8250_stop_rx(struct uart_port *port)
 
 static void serial8250_enable_ms(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	/* no MSR capabilities */
 	if (up->bugs & UART_BUG_NOMSR)
@@ -1581,7 +1611,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 			handled = 1;
 
 			end = NULL;
-		} else if (up->port.iotype == UPIO_DWAPB &&
+		} else if ((up->port.iotype == UPIO_DWAPB ||
+			    up->port.iotype == UPIO_DWAPB32) &&
 			  (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 			/* The DesignWare APB UART has an Busy Detect (0x07)
 			 * interrupt meaning an LCR write attempt occured while the
@@ -1781,7 +1812,8 @@ static void serial8250_backup_timeout(unsigned long data)
 
 static unsigned int serial8250_tx_empty(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 	unsigned int lsr;
 
@@ -1795,7 +1827,8 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned int status;
 	unsigned int ret;
 
@@ -1815,7 +1848,8 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
 
 static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char mcr = 0;
 
 	if (mctrl & TIOCM_RTS)
@@ -1836,7 +1870,8 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 static void serial8250_break_ctl(struct uart_port *port, int break_state)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&up->port.lock, flags);
@@ -1890,7 +1925,8 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 
 static int serial8250_get_poll_char(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char lsr = serial_inp(up, UART_LSR);
 
 	if (!(lsr & UART_LSR_DR))
@@ -1904,7 +1940,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
 			 unsigned char c)
 {
 	unsigned int ier;
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -1938,11 +1975,14 @@ static void serial8250_put_poll_char(struct uart_port *port,
 
 static int serial8250_startup(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 	unsigned char lsr, iir;
 	int retval;
 
+	up->port.fifosize = uart_config[up->port.type].fifo_size;
+	up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
 	up->capabilities = uart_config[up->port.type].flags;
 	up->mcr = 0;
 
@@ -2166,7 +2206,8 @@ dont_test_tx_en:
 
 static void serial8250_shutdown(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 
 	/*
@@ -2235,7 +2276,8 @@ void
 serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		          struct ktermios *old)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -2435,7 +2477,8 @@ serial8250_set_ldisc(struct uart_port *port, int new)
 void serial8250_do_pm(struct uart_port *port, unsigned int state,
 		      unsigned int oldstate)
 {
-	struct uart_8250_port *p = (struct uart_8250_port *)port;
+	struct uart_8250_port *p =
+		container_of(port, struct uart_8250_port, port);
 
 	serial8250_set_sleep(p, state != 0);
 }
@@ -2476,6 +2519,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32:
 	case UPIO_MEM:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		if (!up->port.mapbase)
 			break;
 
@@ -2513,6 +2557,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32:
 	case UPIO_MEM:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		if (!up->port.mapbase)
 			break;
 
@@ -2566,7 +2611,8 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
 
 static void serial8250_release_port(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	serial8250_release_std_resource(up);
 	if (up->port.type == PORT_RSA)
@@ -2575,7 +2621,8 @@ static void serial8250_release_port(struct uart_port *port)
 
 static int serial8250_request_port(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	int ret = 0;
 
 	ret = serial8250_request_std_resource(up);
@@ -2590,7 +2637,8 @@ static int serial8250_request_port(struct uart_port *port)
 
 static void serial8250_config_port(struct uart_port *port, int flags)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	int probeflags = PROBE_ANY;
 	int ret;
 
@@ -2771,7 +2819,8 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 
 static void serial8250_console_putchar(struct uart_port *port, int ch)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	wait_for_xmitr(up, UART_LSR_THRE);
 	serial_out(up, UART_TX, ch);