staging: MIPS: add Octeon USB HCD support

Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB
mass storage.

The driver has been extracted from GPL sources of EdgeRouter Lite firmware
(based on Linux 2.6.32.13). Some minor fixes and cleanups have been done
to make it work with 3.10-rc3.

$ uname -a
Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux
$ modprobe octeon-usb
[   37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned.
[   37.983649] OcteonUSB: Detected 1 ports
[   37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller
[   38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1
[   38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000
[   38.019970] hub 1-0:1.0: USB hub found
[   38.023851] hub 1-0:1.0: 1 port detected
[   38.028101] OcteonUSB: Registered HCD for port 0 on irq 122
[   38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB
[   38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected
[   38.597375] scsi0 : usb-storage 1-1:1.0
[   39.604111] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
[   39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[   39.630696] sd 0:0:0:0: [sda] Write Protect is off
[   39.635945] sd 0:0:0:0: [sda] No Caching mode page present
[   39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.651341] sd 0:0:0:0: [sda] No Caching mode page present
[   39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.664296]  sda: sda1 sda2
[   39.675574] sd 0:0:0:0: [sda] No Caching mode page present
[   39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 854 insertions, 0 deletions

diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c
new file mode 100644
index 00000000000..b78bd19babd
--- /dev/null
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@@ -0,0 +1,854 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Cavium Networks
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include <asm/time.h>
+#include <asm/delay.h>
+
+#include <asm/octeon/cvmx.h>
+#include "cvmx-usb.h"
+#include <asm/octeon/cvmx-iob-defs.h>
+
+#include <linux/usb/hcd.h>
+
+//#define DEBUG_CALL(format, ...)         printk(format, ##__VA_ARGS__)
+#define DEBUG_CALL(format, ...)         do {} while (0)
+//#define DEBUG_SUBMIT(format, ...)       printk(format, ##__VA_ARGS__)
+#define DEBUG_SUBMIT(format, ...)       do {} while (0)
+//#define DEBUG_ROOT_HUB(format, ...)     printk(format, ##__VA_ARGS__)
+#define DEBUG_ROOT_HUB(format, ...)     do {} while (0)
+//#define DEBUG_ERROR(format, ...)        printk(format, ##__VA_ARGS__)
+#define DEBUG_ERROR(format, ...)        do {} while (0)
+#define DEBUG_FATAL(format, ...)        printk(format, ##__VA_ARGS__)
+
+struct octeon_hcd {
+    spinlock_t lock;
+    cvmx_usb_state_t usb;
+    struct tasklet_struct dequeue_tasklet;
+    struct list_head dequeue_list;
+};
+
+/* convert between an HCD pointer and the corresponding struct octeon_hcd */
+static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd)
+{
+	return (struct octeon_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p)
+{
+	return container_of((void *)p, struct usb_hcd, hcd_priv);
+}
+
+static inline struct octeon_hcd *cvmx_usb_to_octeon(cvmx_usb_state_t *p)
+{
+	return container_of(p, struct octeon_hcd, usb);
+}
+
+static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd)
+{
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    unsigned long flags;
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+    spin_lock_irqsave(&priv->lock, flags);
+    cvmx_usb_poll(&priv->usb);
+    spin_unlock_irqrestore(&priv->lock, flags);
+    return IRQ_HANDLED;
+}
+
+static void octeon_usb_port_callback(cvmx_usb_state_t *usb,
+                                     cvmx_usb_callback_t reason,
+                                     cvmx_usb_complete_t status,
+                                     int pipe_handle,
+                                     int submit_handle,
+                                     int bytes_transferred,
+                                     void *user_data)
+{
+    struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+    spin_unlock(&priv->lock);
+    usb_hcd_poll_rh_status(octeon_to_hcd(priv));
+    spin_lock(&priv->lock);
+}
+
+static int octeon_usb_start(struct usb_hcd *hcd)
+{
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    unsigned long flags;
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+    hcd->state = HC_STATE_RUNNING;
+    spin_lock_irqsave(&priv->lock, flags);
+    cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
+                               octeon_usb_port_callback, NULL);
+    spin_unlock_irqrestore(&priv->lock, flags);
+    return 0;
+}
+
+static void octeon_usb_stop(struct usb_hcd *hcd)
+{
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    unsigned long flags;
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+    spin_lock_irqsave(&priv->lock, flags);
+    cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
+                               NULL, NULL);
+    spin_unlock_irqrestore(&priv->lock, flags);
+    hcd->state = HC_STATE_HALT;
+}
+
+static int octeon_usb_get_frame_number(struct usb_hcd *hcd)
+{
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+    return cvmx_usb_get_frame_number(&priv->usb);
+}
+
+static void octeon_usb_urb_complete_callback(cvmx_usb_state_t *usb,
+                                             cvmx_usb_callback_t reason,
+                                             cvmx_usb_complete_t status,
+                                             int pipe_handle,
+                                             int submit_handle,
+                                             int bytes_transferred,
+                                             void *user_data)
+{
+    struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
+    struct urb *urb = user_data;
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+    urb->actual_length = bytes_transferred;
+    urb->hcpriv = NULL;
+
+	if (!list_empty(&urb->urb_list)) {
+		/*
+		 * It is on the dequeue_list, but we are going to call
+		 * usb_hcd_giveback_urb(), so we must clear it from
+		 * the list.  We got to it before the
+		 * octeon_usb_urb_dequeue_work() tasklet did.
+		 */
+		list_del(&urb->urb_list);
+		/* No longer on the dequeue_list. */
+		INIT_LIST_HEAD(&urb->urb_list);
+	}
+
+    /* For Isochronous transactions we need to update the URB packet status
+        list from data in our private copy */
+    if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+    {
+        int i;
+        /* The pointer to the private list is stored in the setup_packet field */
+        cvmx_usb_iso_packet_t *iso_packet = (cvmx_usb_iso_packet_t *)urb->setup_packet;
+        /* Recalculate the transfer size by adding up each packet */
+        urb->actual_length = 0;
+        for (i=0; i<urb->number_of_packets; i++)
+        {
+            if (iso_packet[i].status == CVMX_USB_COMPLETE_SUCCESS)
+            {
+                urb->iso_frame_desc[i].status = 0;
+                urb->iso_frame_desc[i].actual_length = iso_packet[i].length;
+                urb->actual_length += urb->iso_frame_desc[i].actual_length;
+            }
+            else
+            {
+                DEBUG_ERROR("%s: ISOCHRONOUS packet=%d of %d status=%d pipe=%d submit=%d size=%d\n",
+                            __FUNCTION__, i, urb->number_of_packets,
+                            iso_packet[i].status, pipe_handle,
+                            submit_handle, iso_packet[i].length);
+                urb->iso_frame_desc[i].status = -EREMOTEIO;
+            }
+        }
+        /* Free the private list now that we don't need it anymore */
+        kfree(iso_packet);
+        urb->setup_packet = NULL;
+    }
+
+    switch (status)
+    {
+        case CVMX_USB_COMPLETE_SUCCESS:
+            urb->status = 0;
+            break;
+        case CVMX_USB_COMPLETE_CANCEL:
+            if (urb->status == 0)
+                urb->status = -ENOENT;
+            break;
+        case CVMX_USB_COMPLETE_STALL:
+            DEBUG_ERROR("%s: status=stall pipe=%d submit=%d size=%d\n", __FUNCTION__, pipe_handle, submit_handle, bytes_transferred);
+            urb->status = -EPIPE;
+            break;
+        case CVMX_USB_COMPLETE_BABBLEERR:
+            DEBUG_ERROR("%s: status=babble pipe=%d submit=%d size=%d\n", __FUNCTION__, pipe_handle, submit_handle, bytes_transferred);
+            urb->status = -EPIPE;
+            break;
+        case CVMX_USB_COMPLETE_SHORT:
+            DEBUG_ERROR("%s: status=short pipe=%d submit=%d size=%d\n", __FUNCTION__, pipe_handle, submit_handle, bytes_transferred);
+            urb->status = -EREMOTEIO;
+            break;
+        case CVMX_USB_COMPLETE_ERROR:
+        case CVMX_USB_COMPLETE_XACTERR:
+        case CVMX_USB_COMPLETE_DATATGLERR:
+        case CVMX_USB_COMPLETE_FRAMEERR:
+            DEBUG_ERROR("%s: status=%d pipe=%d submit=%d size=%d\n", __FUNCTION__, status, pipe_handle, submit_handle, bytes_transferred);
+            urb->status = -EPROTO;
+            break;
+    }
+    spin_unlock(&priv->lock);
+    usb_hcd_giveback_urb(octeon_to_hcd(priv), urb, urb->status);
+    spin_lock(&priv->lock);
+}
+
+static int octeon_usb_urb_enqueue(struct usb_hcd *hcd,
+                                  struct urb *urb,
+                                  gfp_t mem_flags)
+{
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    int submit_handle = -1;
+    int pipe_handle;
+    unsigned long flags;
+    cvmx_usb_iso_packet_t *iso_packet;
+    struct usb_host_endpoint *ep = urb->ep;
+
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+    urb->status = 0;
+    INIT_LIST_HEAD(&urb->urb_list); /* not enqueued on dequeue_list */
+    spin_lock_irqsave(&priv->lock, flags);
+
+    if (!ep->hcpriv)
+    {
+        cvmx_usb_transfer_t transfer_type;
+        cvmx_usb_speed_t speed;
+        int split_device = 0;
+        int split_port = 0;
+        switch (usb_pipetype(urb->pipe))
+        {
+            case PIPE_ISOCHRONOUS:
+                transfer_type = CVMX_USB_TRANSFER_ISOCHRONOUS;
+                break;
+            case PIPE_INTERRUPT:
+                transfer_type = CVMX_USB_TRANSFER_INTERRUPT;
+                break;
+            case PIPE_CONTROL:
+                transfer_type = CVMX_USB_TRANSFER_CONTROL;
+                break;
+            default:
+                transfer_type = CVMX_USB_TRANSFER_BULK;
+                break;
+        }
+        switch (urb->dev->speed)
+        {
+            case USB_SPEED_LOW:
+                speed = CVMX_USB_SPEED_LOW;
+                break;
+            case USB_SPEED_FULL:
+                speed = CVMX_USB_SPEED_FULL;
+                break;
+            default:
+                speed = CVMX_USB_SPEED_HIGH;
+                break;
+        }
+        /* For slow devices on high speed ports we need to find the hub that
+            does the speed translation so we know where to send the split
+            transactions */
+        if (speed != CVMX_USB_SPEED_HIGH)
+        {
+            /* Start at this device and work our way up the usb tree */
+            struct usb_device *dev = urb->dev;
+            while (dev->parent)
+            {
+                /* If our parent is high speed then he'll receive the splits */
+                if (dev->parent->speed == USB_SPEED_HIGH)
+                {
+                    split_device = dev->parent->devnum;
+                    split_port = dev->portnum;
+                    break;
+                }
+                /* Move up the tree one level. If we make it all the way up the
+                    tree, then the port must not be in high speed mode and we
+                    don't need a split */
+                dev = dev->parent;
+            }
+        }
+        pipe_handle = cvmx_usb_open_pipe(&priv->usb,
+                                         0,
+                                         usb_pipedevice(urb->pipe),
+                                         usb_pipeendpoint(urb->pipe),
+                                         speed,
+                                         le16_to_cpu(ep->desc.wMaxPacketSize) & 0x7ff,
+                                         transfer_type,
+                                         usb_pipein(urb->pipe) ? CVMX_USB_DIRECTION_IN : CVMX_USB_DIRECTION_OUT,
+                                         urb->interval,
+                                         (le16_to_cpu(ep->desc.wMaxPacketSize)>>11) & 0x3,
+                                         split_device,
+                                         split_port);
+        if (pipe_handle < 0)
+        {
+            spin_unlock_irqrestore(&priv->lock, flags);
+            DEBUG_ERROR("OcteonUSB: %s failed to create pipe\n", __FUNCTION__);
+            return -ENOMEM;
+        }
+        ep->hcpriv = (void*)(0x10000L + pipe_handle);
+    }
+    else
+        pipe_handle = 0xffff & (long)ep->hcpriv;
+
+    switch (usb_pipetype(urb->pipe))
+    {
+        case PIPE_ISOCHRONOUS:
+            DEBUG_SUBMIT("OcteonUSB: %s submit isochronous to %d.%d\n", __FUNCTION__, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+            /* Allocate a structure to use for our private list of isochronous
+                packets */
+            iso_packet = kmalloc(urb->number_of_packets * sizeof(cvmx_usb_iso_packet_t), GFP_ATOMIC);
+            if (iso_packet)
+            {
+                int i;
+                /* Fill the list with the data from the URB */
+                for (i=0; i<urb->number_of_packets; i++)
+                {
+                    iso_packet[i].offset = urb->iso_frame_desc[i].offset;
+                    iso_packet[i].length = urb->iso_frame_desc[i].length;
+                    iso_packet[i].status = CVMX_USB_COMPLETE_ERROR;
+                }
+                /* Store a pointer to the list in uthe URB setup_pakcet field.
+                    We know this currently isn't being used and this saves us
+                    a bunch of logic */
+                urb->setup_packet = (char*)iso_packet;
+                submit_handle = cvmx_usb_submit_isochronous(&priv->usb, pipe_handle,
+                                                            urb->start_frame,
+                                                            0 /* flags */,
+                                                            urb->number_of_packets,
+                                                            iso_packet,
+                                                            urb->transfer_dma,
+                                                            urb->transfer_buffer_length,
+                                                            octeon_usb_urb_complete_callback,
+                                                            urb);
+                /* If submit failed we need to free our private packet list */
+                if (submit_handle < 0)
+                {
+                    urb->setup_packet = NULL;
+                    kfree(iso_packet);
+                }
+            }
+            break;
+        case PIPE_INTERRUPT:
+            DEBUG_SUBMIT("OcteonUSB: %s submit interrupt to %d.%d\n", __FUNCTION__, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+            submit_handle = cvmx_usb_submit_interrupt(&priv->usb, pipe_handle,
+                                                      urb->transfer_dma,
+                                                      urb->transfer_buffer_length,
+                                                      octeon_usb_urb_complete_callback,
+                                                      urb);
+            break;
+        case PIPE_CONTROL:
+            DEBUG_SUBMIT("OcteonUSB: %s submit control to %d.%d\n", __FUNCTION__, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+            submit_handle = cvmx_usb_submit_control(&priv->usb, pipe_handle,
+                                                    urb->setup_dma,
+                                                    urb->transfer_dma,
+                                                    urb->transfer_buffer_length,
+                                                    octeon_usb_urb_complete_callback,
+                                                    urb);
+            break;
+        case PIPE_BULK:
+            DEBUG_SUBMIT("OcteonUSB: %s submit bulk to %d.%d\n", __FUNCTION__, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+            submit_handle = cvmx_usb_submit_bulk(&priv->usb, pipe_handle,
+                                                 urb->transfer_dma,
+                                                 urb->transfer_buffer_length,
+                                                 octeon_usb_urb_complete_callback,
+                                                 urb);
+            break;
+    }
+    if (submit_handle < 0)
+    {
+        spin_unlock_irqrestore(&priv->lock, flags);
+        DEBUG_ERROR("OcteonUSB: %s failed to submit\n", __FUNCTION__);
+        return -ENOMEM;
+    }
+    urb->hcpriv = (void*)(long)(((submit_handle & 0xffff) << 16) | pipe_handle);
+    spin_unlock_irqrestore(&priv->lock, flags);
+    return 0;
+}
+
+static void octeon_usb_urb_dequeue_work(unsigned long arg)
+{
+    unsigned long flags;
+    struct octeon_hcd *priv = (struct octeon_hcd *)arg;
+
+    spin_lock_irqsave(&priv->lock, flags);
+
+    while (!list_empty(&priv->dequeue_list)) {
+        int pipe_handle;
+        int submit_handle;
+        struct urb *urb = container_of(priv->dequeue_list.next, struct urb, urb_list);
+        list_del(&urb->urb_list);
+        /* not enqueued on dequeue_list */
+        INIT_LIST_HEAD(&urb->urb_list);
+        pipe_handle = 0xffff & (long)urb->hcpriv;
+        submit_handle = ((long)urb->hcpriv) >> 16;
+        cvmx_usb_cancel(&priv->usb, pipe_handle, submit_handle);
+    }
+
+    spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int octeon_usb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    unsigned long flags;
+
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+    if (!urb->dev)
+        return -EINVAL;
+
+    spin_lock_irqsave(&priv->lock, flags);
+
+    urb->status = status;
+    list_add_tail(&urb->urb_list, &priv->dequeue_list);
+
+    spin_unlock_irqrestore(&priv->lock, flags);
+
+    tasklet_schedule(&priv->dequeue_tasklet);
+
+    return 0;
+}
+
+static void octeon_usb_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+    if (ep->hcpriv)
+    {
+        struct octeon_hcd *priv = hcd_to_octeon(hcd);
+        int pipe_handle = 0xffff & (long)ep->hcpriv;
+        unsigned long flags;
+        spin_lock_irqsave(&priv->lock, flags);
+        cvmx_usb_cancel_all(&priv->usb, pipe_handle);
+        if (cvmx_usb_close_pipe(&priv->usb, pipe_handle))
+            DEBUG_ERROR("OcteonUSB: Closing pipe %d failed\n", pipe_handle);
+        spin_unlock_irqrestore(&priv->lock, flags);
+        ep->hcpriv = NULL;
+    }
+}
+
+static int octeon_usb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    cvmx_usb_port_status_t port_status;
+    unsigned long flags;
+
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+    spin_lock_irqsave(&priv->lock, flags);
+    port_status = cvmx_usb_get_status(&priv->usb);
+    spin_unlock_irqrestore(&priv->lock, flags);
+    buf[0] = 0;
+    buf[0] = port_status.connect_change << 1;
+
+    return(buf[0] != 0);
+}
+
+static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    cvmx_usb_port_status_t usb_port_status;
+    int port_status;
+    struct usb_hub_descriptor *desc;
+    unsigned long flags;
+
+    switch (typeReq)
+    {
+        case ClearHubFeature:
+            DEBUG_ROOT_HUB("OcteonUSB: ClearHubFeature\n");
+            switch (wValue)
+            {
+                case C_HUB_LOCAL_POWER:
+                case C_HUB_OVER_CURRENT:
+                    /* Nothing required here */
+                    break;
+                default:
+                    return -EINVAL;
+            }
+            break;
+        case ClearPortFeature:
+            DEBUG_ROOT_HUB("OcteonUSB: ClearPortFeature");
+            if (wIndex != 1)
+            {
+                DEBUG_ROOT_HUB(" INVALID\n");
+                return -EINVAL;
+            }
+
+            switch (wValue)
+            {
+                case USB_PORT_FEAT_ENABLE:
+                    DEBUG_ROOT_HUB(" ENABLE");
+                    spin_lock_irqsave(&priv->lock, flags);
+                    cvmx_usb_disable(&priv->usb);
+                    spin_unlock_irqrestore(&priv->lock, flags);
+                    break;
+                case USB_PORT_FEAT_SUSPEND:
+                    DEBUG_ROOT_HUB(" SUSPEND");
+                    /* Not supported on Octeon */
+                    break;
+                case USB_PORT_FEAT_POWER:
+                    DEBUG_ROOT_HUB(" POWER");
+                    /* Not supported on Octeon */
+                    break;
+                case USB_PORT_FEAT_INDICATOR:
+                    DEBUG_ROOT_HUB(" INDICATOR");
+                    /* Port inidicator not supported */
+                    break;
+                case USB_PORT_FEAT_C_CONNECTION:
+                    DEBUG_ROOT_HUB(" C_CONNECTION");
+                    /* Clears drivers internal connect status change flag */
+                    spin_lock_irqsave(&priv->lock, flags);
+                    cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+                    spin_unlock_irqrestore(&priv->lock, flags);
+                    break;
+                case USB_PORT_FEAT_C_RESET:
+                    DEBUG_ROOT_HUB(" C_RESET");
+                    /* Clears the driver's internal Port Reset Change flag */
+                    spin_lock_irqsave(&priv->lock, flags);
+                    cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+                    spin_unlock_irqrestore(&priv->lock, flags);
+                    break;
+                case USB_PORT_FEAT_C_ENABLE:
+                    DEBUG_ROOT_HUB(" C_ENABLE");
+                    /* Clears the driver's internal Port Enable/Disable Change flag */
+                    spin_lock_irqsave(&priv->lock, flags);
+                    cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+                    spin_unlock_irqrestore(&priv->lock, flags);
+                    break;
+                case USB_PORT_FEAT_C_SUSPEND:
+                    DEBUG_ROOT_HUB(" C_SUSPEND");
+                    /* Clears the driver's internal Port Suspend Change flag,
+                        which is set when resume signaling on the host port is
+                        complete */
+                    break;
+                case USB_PORT_FEAT_C_OVER_CURRENT:
+                    DEBUG_ROOT_HUB(" C_OVER_CURRENT");
+                    /* Clears the driver's overcurrent Change flag */
+                    spin_lock_irqsave(&priv->lock, flags);
+                    cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+                    spin_unlock_irqrestore(&priv->lock, flags);
+                    break;
+                default:
+                    DEBUG_ROOT_HUB(" UNKNOWN\n");
+                    return -EINVAL;
+            }
+            DEBUG_ROOT_HUB("\n");
+            break;
+        case GetHubDescriptor:
+            DEBUG_ROOT_HUB("OcteonUSB: GetHubDescriptor\n");
+            desc = (struct usb_hub_descriptor *)buf;
+            desc->bDescLength = 9;
+            desc->bDescriptorType = 0x29;
+            desc->bNbrPorts = 1;
+            desc->wHubCharacteristics = 0x08;
+            desc->bPwrOn2PwrGood = 1;
+            desc->bHubContrCurrent = 0;
+            desc->u.hs.DeviceRemovable[0] = 0;
+            desc->u.hs.DeviceRemovable[1] = 0xff;
+            break;
+        case GetHubStatus:
+            DEBUG_ROOT_HUB("OcteonUSB: GetHubStatus\n");
+            *(__le32 *)buf = 0;
+            break;
+        case GetPortStatus:
+            DEBUG_ROOT_HUB("OcteonUSB: GetPortStatus");
+            if (wIndex != 1)
+            {
+                DEBUG_ROOT_HUB(" INVALID\n");
+                return -EINVAL;
+            }
+
+            spin_lock_irqsave(&priv->lock, flags);
+            usb_port_status = cvmx_usb_get_status(&priv->usb);
+            spin_unlock_irqrestore(&priv->lock, flags);
+            port_status = 0;
+
+            if (usb_port_status.connect_change)
+            {
+                port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
+                DEBUG_ROOT_HUB(" C_CONNECTION");
+            }
+
+            if (usb_port_status.port_enabled)
+            {
+                port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
+                DEBUG_ROOT_HUB(" C_ENABLE");
+            }
+
+            if (usb_port_status.connected)
+            {
+                port_status |= (1 << USB_PORT_FEAT_CONNECTION);
+                DEBUG_ROOT_HUB(" CONNECTION");
+            }
+
+            if (usb_port_status.port_enabled)
+            {
+                port_status |= (1 << USB_PORT_FEAT_ENABLE);
+                DEBUG_ROOT_HUB(" ENABLE");
+            }
+
+            if (usb_port_status.port_over_current)
+            {
+                port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
+                DEBUG_ROOT_HUB(" OVER_CURRENT");
+            }
+
+            if (usb_port_status.port_powered)
+            {
+                port_status |= (1 << USB_PORT_FEAT_POWER);
+                DEBUG_ROOT_HUB(" POWER");
+            }
+
+            if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH)
+            {
+		port_status |= USB_PORT_STAT_HIGH_SPEED;
+                DEBUG_ROOT_HUB(" HIGHSPEED");
+            }
+            else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW)
+            {
+                port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
+                DEBUG_ROOT_HUB(" LOWSPEED");
+            }
+
+            *((__le32 *)buf) = cpu_to_le32(port_status);
+            DEBUG_ROOT_HUB("\n");
+            break;
+        case SetHubFeature:
+            DEBUG_ROOT_HUB("OcteonUSB: SetHubFeature\n");
+            /* No HUB features supported */
+            break;
+        case SetPortFeature:
+            DEBUG_ROOT_HUB("OcteonUSB: SetPortFeature");
+            if (wIndex != 1)
+            {
+                DEBUG_ROOT_HUB(" INVALID\n");
+                return -EINVAL;
+            }
+
+            switch (wValue)
+            {
+                case USB_PORT_FEAT_SUSPEND:
+                    DEBUG_ROOT_HUB(" SUSPEND\n");
+                    return -EINVAL;
+                case USB_PORT_FEAT_POWER:
+                    DEBUG_ROOT_HUB(" POWER\n");
+                    return -EINVAL;
+                case USB_PORT_FEAT_RESET:
+                    DEBUG_ROOT_HUB(" RESET\n");
+                    spin_lock_irqsave(&priv->lock, flags);
+                    cvmx_usb_disable(&priv->usb);
+                    if (cvmx_usb_enable(&priv->usb))
+                        DEBUG_ERROR("Failed to enable the port\n");
+                    spin_unlock_irqrestore(&priv->lock, flags);
+                    return 0;
+                case USB_PORT_FEAT_INDICATOR:
+                    DEBUG_ROOT_HUB(" INDICATOR\n");
+                    /* Not supported */
+                    break;
+                default:
+                    DEBUG_ROOT_HUB(" UNKNOWN\n");
+                    return -EINVAL;
+            }
+            break;
+        default:
+            DEBUG_ROOT_HUB("OcteonUSB: Unknown root hub request\n");
+            return -EINVAL;
+    }
+    return 0;
+}
+
+
+static const struct hc_driver octeon_hc_driver = {
+    .description =      "Octeon USB",
+    .product_desc =     "Octeon Host Controller",
+    .hcd_priv_size =    sizeof(struct octeon_hcd),
+    .irq =              octeon_usb_irq,
+    .flags =            HCD_MEMORY | HCD_USB2,
+    .start =            octeon_usb_start,
+    .stop =             octeon_usb_stop,
+    .urb_enqueue =      octeon_usb_urb_enqueue,
+    .urb_dequeue =      octeon_usb_urb_dequeue,
+    .endpoint_disable = octeon_usb_endpoint_disable,
+    .get_frame_number = octeon_usb_get_frame_number,
+    .hub_status_data =  octeon_usb_hub_status_data,
+    .hub_control =      octeon_usb_hub_control,
+};
+
+
+static int octeon_usb_driver_probe(struct device *dev)
+{
+    int status;
+    int usb_num = to_platform_device(dev)->id;
+    int irq = platform_get_irq(to_platform_device(dev), 0);
+    struct octeon_hcd *priv;
+    struct usb_hcd *hcd;
+    unsigned long flags;
+
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+    /* Set the DMA mask to 64bits so we get buffers already translated for
+        DMA */
+    dev->coherent_dma_mask = ~0;
+    dev->dma_mask = &dev->coherent_dma_mask;
+
+    hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
+    if (!hcd)
+    {
+        DEBUG_FATAL("OcteonUSB: Failed to allocate memory for HCD\n");
+        return -1;
+    }
+    hcd->uses_new_polling = 1;
+    priv = (struct octeon_hcd *)hcd->hcd_priv;
+
+    spin_lock_init(&priv->lock);
+
+    tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
+    INIT_LIST_HEAD(&priv->dequeue_list);
+
+    //status = cvmx_usb_initialize(&priv->usb, usb_num, CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO | CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO | CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS | CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS);
+    status = cvmx_usb_initialize(&priv->usb, usb_num, CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO);
+    if (status)
+    {
+        DEBUG_FATAL("OcteonUSB: USB initialization failed with %d\n", status);
+        kfree(hcd);
+        return -1;
+    }
+
+    /* This delay is needed for CN3010, but I don't know why... */
+    mdelay(10);
+
+    spin_lock_irqsave(&priv->lock, flags);
+    cvmx_usb_poll(&priv->usb);
+    spin_unlock_irqrestore(&priv->lock, flags);
+
+    status = usb_add_hcd(hcd, irq, IRQF_SHARED);
+    if (status)
+    {
+        DEBUG_FATAL("OcteonUSB: USB add HCD failed with %d\n", status);
+        kfree(hcd);
+        return -1;
+    }
+
+    printk("OcteonUSB: Registered HCD for port %d on irq %d\n", usb_num, irq);
+
+    return 0;
+}
+
+static int octeon_usb_driver_remove(struct device *dev)
+{
+    int status;
+    struct usb_hcd *hcd = dev_get_drvdata(dev);
+    struct octeon_hcd *priv = hcd_to_octeon(hcd);
+    unsigned long flags;
+
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+    usb_remove_hcd(hcd);
+    tasklet_kill(&priv->dequeue_tasklet);
+    spin_lock_irqsave(&priv->lock, flags);
+    status = cvmx_usb_shutdown(&priv->usb);
+    spin_unlock_irqrestore(&priv->lock, flags);
+    if (status)
+        DEBUG_FATAL("OcteonUSB: USB shutdown failed with %d\n", status);
+
+    kfree(hcd);
+
+    return 0;
+}
+
+static struct device_driver octeon_usb_driver = {
+    .name       = "OcteonUSB",
+    .bus        = &platform_bus_type,
+    .probe      = octeon_usb_driver_probe,
+    .remove     = octeon_usb_driver_remove,
+};
+
+
+#define MAX_USB_PORTS   10
+struct platform_device *pdev_glob[MAX_USB_PORTS];
+static int octeon_usb_registered;
+static int __init octeon_usb_module_init(void)
+{
+    int num_devices = cvmx_usb_get_num_ports();
+    int device;
+
+    if (usb_disabled() || num_devices == 0)
+	return -ENODEV;
+
+    if (driver_register(&octeon_usb_driver))
+    {
+        DEBUG_FATAL("OcteonUSB: Failed to register driver\n");
+        return -ENOMEM;
+    }
+    octeon_usb_registered = 1;
+    printk("OcteonUSB: Detected %d ports\n", num_devices);
+
+	/*
+	 * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
+	 * IOB priority registers.  Under heavy network load USB
+	 * hardware can be starved by the IOB causing a crash.  Give
+	 * it a priority boost if it has been waiting more than 400
+	 * cycles to avoid this situation.
+	 *
+	 * Testing indicates that a cnt_val of 8192 is not sufficient,
+	 * but no failures are seen with 4096.  We choose a value of
+	 * 400 to give a safety factor of 10.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
+		union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
+
+		pri_cnt.u64 = 0;
+		pri_cnt.s.cnt_enb = 1;
+		pri_cnt.s.cnt_val = 400;
+		cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
+	}
+
+    for (device = 0; device < num_devices; device++)
+    {
+        struct resource irq_resource;
+        struct platform_device *pdev;
+        memset(&irq_resource, 0, sizeof(irq_resource));
+        irq_resource.start = (device==0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
+        irq_resource.end = irq_resource.start;
+        irq_resource.flags = IORESOURCE_IRQ;
+        pdev = platform_device_register_simple((char*)octeon_usb_driver.name, device, &irq_resource, 1);
+        if (!pdev)
+        {
+            DEBUG_FATAL("OcteonUSB: Failed to allocate platform device for USB%d\n", device);
+            return -ENOMEM;
+        }
+        if (device < MAX_USB_PORTS)
+            pdev_glob[device] = pdev;
+
+    }
+    return 0;
+}
+
+static void __exit octeon_usb_module_cleanup(void)
+{
+    int i;
+    DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+    for (i = 0; i <MAX_USB_PORTS; i++)
+        if (pdev_glob[i])
+        {
+            platform_device_unregister(pdev_glob[i]);
+            pdev_glob[i] = NULL;
+        }
+	if (octeon_usb_registered)
+		driver_unregister(&octeon_usb_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
+module_init(octeon_usb_module_init);
+module_exit(octeon_usb_module_cleanup);