aboutsummaryrefslogtreecommitdiff
path: root/drivers/staging
diff options
context:
space:
mode:
authorMark Einon <mark.einon@gmail.com>2011-10-23 10:22:48 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2011-10-23 11:35:12 +0200
commit36f2771a70c44b3fbc1be34d5a82e8472437c7ca (patch)
tree978d3c516ae2a2836a01142d9464188fb40b5b72 /drivers/staging
parent44012dfe4e6113c5c51393e2cd6cd49d8108da96 (diff)
staging: et131x: Remove forward declaration of et131x_adapter_setup
Also associated function movements within et131x.c file Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging')
-rw-r--r--drivers/staging/et131x/et131x.c445
1 files changed, 222 insertions, 223 deletions
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 8048d676614..29476350fca 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -576,7 +576,6 @@ struct et131x_adapter {
struct net_device_stats net_stats;
};
-void et131x_adapter_setup(struct et131x_adapter *adapter);
void et131x_soft_reset(struct et131x_adapter *adapter);
void et131x_isr_handler(struct work_struct *work);
void et1310_setup_device_for_multicast(struct et131x_adapter *adapter);
@@ -1731,6 +1730,53 @@ void et131x_xcvr_init(struct et131x_adapter *adapter)
}
}
+/**
+ * et131x_configure_global_regs - configure JAGCore global regs
+ * @adapter: pointer to our adapter structure
+ *
+ * Used to configure the global registers on the JAGCore
+ */
+void et131x_configure_global_regs(struct et131x_adapter *adapter)
+{
+ struct global_regs __iomem *regs = &adapter->regs->global;
+
+ writel(0, &regs->rxq_start_addr);
+ writel(INTERNAL_MEM_SIZE - 1, &regs->txq_end_addr);
+
+ if (adapter->registry_jumbo_packet < 2048) {
+ /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word
+ * block of RAM that the driver can split between Tx
+ * and Rx as it desires. Our default is to split it
+ * 50/50:
+ */
+ writel(PARM_RX_MEM_END_DEF, &regs->rxq_end_addr);
+ writel(PARM_RX_MEM_END_DEF + 1, &regs->txq_start_addr);
+ } else if (adapter->registry_jumbo_packet < 8192) {
+ /* For jumbo packets > 2k but < 8k, split 50-50. */
+ writel(INTERNAL_MEM_RX_OFFSET, &regs->rxq_end_addr);
+ writel(INTERNAL_MEM_RX_OFFSET + 1, &regs->txq_start_addr);
+ } else {
+ /* 9216 is the only packet size greater than 8k that
+ * is available. The Tx buffer has to be big enough
+ * for one whole packet on the Tx side. We'll make
+ * the Tx 9408, and give the rest to Rx
+ */
+ writel(0x01b3, &regs->rxq_end_addr);
+ writel(0x01b4, &regs->txq_start_addr);
+ }
+
+ /* Initialize the loopback register. Disable all loopbacks. */
+ writel(0, &regs->loopback);
+
+ /* MSI Register */
+ writel(0, &regs->msi_config);
+
+ /* By default, disable the watchdog timer. It will be enabled when
+ * a packet is queued.
+ */
+ writel(0, &regs->watchdog_timer);
+}
+
/* PM functions */
/**
@@ -1749,6 +1795,181 @@ int et1310_in_phy_coma(struct et131x_adapter *adapter)
}
/**
+ * et131x_config_rx_dma_regs - Start of Rx_DMA init sequence
+ * @adapter: pointer to our adapter structure
+ */
+void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
+{
+ struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma;
+ struct rx_ring *rx_local = &adapter->rx_ring;
+ struct fbr_desc *fbr_entry;
+ u32 entry;
+ u32 psr_num_des;
+ unsigned long flags;
+
+ /* Halt RXDMA to perform the reconfigure. */
+ et131x_rx_dma_disable(adapter);
+
+ /* Load the completion writeback physical address
+ *
+ * NOTE : dma_alloc_coherent(), used above to alloc DMA regions,
+ * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+ * are ever returned, make sure the high part is retrieved here
+ * before storing the adjusted address.
+ */
+ writel((u32) ((u64)rx_local->rx_status_bus >> 32),
+ &rx_dma->dma_wb_base_hi);
+ writel((u32) rx_local->rx_status_bus, &rx_dma->dma_wb_base_lo);
+
+ memset(rx_local->rx_status_block, 0, sizeof(struct rx_status_block));
+
+ /* Set the address and parameters of the packet status ring into the
+ * 1310's registers
+ */
+ writel((u32) ((u64)rx_local->ps_ring_physaddr >> 32),
+ &rx_dma->psr_base_hi);
+ writel((u32) rx_local->ps_ring_physaddr, &rx_dma->psr_base_lo);
+ writel(rx_local->psr_num_entries - 1, &rx_dma->psr_num_des);
+ writel(0, &rx_dma->psr_full_offset);
+
+ psr_num_des = readl(&rx_dma->psr_num_des) & 0xFFF;
+ writel((psr_num_des * LO_MARK_PERCENT_FOR_PSR) / 100,
+ &rx_dma->psr_min_des);
+
+ spin_lock_irqsave(&adapter->rcv_lock, flags);
+
+ /* These local variables track the PSR in the adapter structure */
+ rx_local->local_psr_full = 0;
+
+ /* Now's the best time to initialize FBR1 contents */
+ fbr_entry = (struct fbr_desc *) rx_local->fbr[0]->ring_virtaddr;
+ for (entry = 0; entry < rx_local->fbr[0]->num_entries; entry++) {
+ fbr_entry->addr_hi = rx_local->fbr[0]->bus_high[entry];
+ fbr_entry->addr_lo = rx_local->fbr[0]->bus_low[entry];
+ fbr_entry->word2 = entry;
+ fbr_entry++;
+ }
+
+ /* Set the address and parameters of Free buffer ring 1 (and 0 if
+ * required) into the 1310's registers
+ */
+ writel((u32) (rx_local->fbr[0]->real_physaddr >> 32),
+ &rx_dma->fbr1_base_hi);
+ writel((u32) rx_local->fbr[0]->real_physaddr, &rx_dma->fbr1_base_lo);
+ writel(rx_local->fbr[0]->num_entries - 1, &rx_dma->fbr1_num_des);
+ writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset);
+
+ /* This variable tracks the free buffer ring 1 full position, so it
+ * has to match the above.
+ */
+ rx_local->fbr[0]->local_full = ET_DMA10_WRAP;
+ writel(
+ ((rx_local->fbr[0]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+ &rx_dma->fbr1_min_des);
+
+#ifdef USE_FBR0
+ /* Now's the best time to initialize FBR0 contents */
+ fbr_entry = (struct fbr_desc *) rx_local->fbr[1]->ring_virtaddr;
+ for (entry = 0; entry < rx_local->fbr[1]->num_entries; entry++) {
+ fbr_entry->addr_hi = rx_local->fbr[1]->bus_high[entry];
+ fbr_entry->addr_lo = rx_local->fbr[1]->bus_low[entry];
+ fbr_entry->word2 = entry;
+ fbr_entry++;
+ }
+
+ writel((u32) (rx_local->fbr[1]->real_physaddr >> 32),
+ &rx_dma->fbr0_base_hi);
+ writel((u32) rx_local->fbr[1]->real_physaddr, &rx_dma->fbr0_base_lo);
+ writel(rx_local->fbr[1]->num_entries - 1, &rx_dma->fbr0_num_des);
+ writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset);
+
+ /* This variable tracks the free buffer ring 0 full position, so it
+ * has to match the above.
+ */
+ rx_local->fbr[1]->local_full = ET_DMA10_WRAP;
+ writel(
+ ((rx_local->fbr[1]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+ &rx_dma->fbr0_min_des);
+#endif
+
+ /* Program the number of packets we will receive before generating an
+ * interrupt.
+ * For version B silicon, this value gets updated once autoneg is
+ *complete.
+ */
+ writel(PARM_RX_NUM_BUFS_DEF, &rx_dma->num_pkt_done);
+
+ /* The "time_done" is not working correctly to coalesce interrupts
+ * after a given time period, but rather is giving us an interrupt
+ * regardless of whether we have received packets.
+ * This value gets updated once autoneg is complete.
+ */
+ writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time);
+
+ spin_unlock_irqrestore(&adapter->rcv_lock, flags);
+}
+
+/**
+ * et131x_config_tx_dma_regs - Set up the tx dma section of the JAGCore.
+ * @adapter: pointer to our private adapter structure
+ *
+ * Configure the transmit engine with the ring buffers we have created
+ * and prepare it for use.
+ */
+void et131x_config_tx_dma_regs(struct et131x_adapter *adapter)
+{
+ struct txdma_regs __iomem *txdma = &adapter->regs->txdma;
+
+ /* Load the hardware with the start of the transmit descriptor ring. */
+ writel((u32) ((u64)adapter->tx_ring.tx_desc_ring_pa >> 32),
+ &txdma->pr_base_hi);
+ writel((u32) adapter->tx_ring.tx_desc_ring_pa,
+ &txdma->pr_base_lo);
+
+ /* Initialise the transmit DMA engine */
+ writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des);
+
+ /* Load the completion writeback physical address */
+ writel((u32)((u64)adapter->tx_ring.tx_status_pa >> 32),
+ &txdma->dma_wb_base_hi);
+ writel((u32)adapter->tx_ring.tx_status_pa, &txdma->dma_wb_base_lo);
+
+ *adapter->tx_ring.tx_status = 0;
+
+ writel(0, &txdma->service_request);
+ adapter->tx_ring.send_idx = 0;
+}
+
+/**
+ * et131x_adapter_setup - Set the adapter up as per cassini+ documentation
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+void et131x_adapter_setup(struct et131x_adapter *adapter)
+{
+ /* Configure the JAGCore */
+ et131x_configure_global_regs(adapter);
+
+ et1310_config_mac_regs1(adapter);
+
+ /* Configure the MMC registers */
+ /* All we need to do is initialize the Memory Control Register */
+ writel(ET_MMC_ENABLE, &adapter->regs->mmc.mmc_ctrl);
+
+ et1310_config_rxmac_regs(adapter);
+ et1310_config_txmac_regs(adapter);
+
+ et131x_config_rx_dma_regs(adapter);
+ et131x_config_tx_dma_regs(adapter);
+
+ et1310_config_macstat_regs(adapter);
+
+ et1310_phy_power_down(adapter, 0);
+ et131x_xcvr_init(adapter);
+}
+
+/**
* et1310_enable_phy_coma - called when network cable is unplugged
* @adapter: pointer to our adapter structure
*
@@ -2390,121 +2611,6 @@ int et131x_init_recv(struct et131x_adapter *adapter)
}
/**
- * et131x_config_rx_dma_regs - Start of Rx_DMA init sequence
- * @adapter: pointer to our adapter structure
- */
-void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
-{
- struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma;
- struct rx_ring *rx_local = &adapter->rx_ring;
- struct fbr_desc *fbr_entry;
- u32 entry;
- u32 psr_num_des;
- unsigned long flags;
-
- /* Halt RXDMA to perform the reconfigure. */
- et131x_rx_dma_disable(adapter);
-
- /* Load the completion writeback physical address
- *
- * NOTE : dma_alloc_coherent(), used above to alloc DMA regions,
- * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
- * are ever returned, make sure the high part is retrieved here
- * before storing the adjusted address.
- */
- writel((u32) ((u64)rx_local->rx_status_bus >> 32),
- &rx_dma->dma_wb_base_hi);
- writel((u32) rx_local->rx_status_bus, &rx_dma->dma_wb_base_lo);
-
- memset(rx_local->rx_status_block, 0, sizeof(struct rx_status_block));
-
- /* Set the address and parameters of the packet status ring into the
- * 1310's registers
- */
- writel((u32) ((u64)rx_local->ps_ring_physaddr >> 32),
- &rx_dma->psr_base_hi);
- writel((u32) rx_local->ps_ring_physaddr, &rx_dma->psr_base_lo);
- writel(rx_local->psr_num_entries - 1, &rx_dma->psr_num_des);
- writel(0, &rx_dma->psr_full_offset);
-
- psr_num_des = readl(&rx_dma->psr_num_des) & 0xFFF;
- writel((psr_num_des * LO_MARK_PERCENT_FOR_PSR) / 100,
- &rx_dma->psr_min_des);
-
- spin_lock_irqsave(&adapter->rcv_lock, flags);
-
- /* These local variables track the PSR in the adapter structure */
- rx_local->local_psr_full = 0;
-
- /* Now's the best time to initialize FBR1 contents */
- fbr_entry = (struct fbr_desc *) rx_local->fbr[0]->ring_virtaddr;
- for (entry = 0; entry < rx_local->fbr[0]->num_entries; entry++) {
- fbr_entry->addr_hi = rx_local->fbr[0]->bus_high[entry];
- fbr_entry->addr_lo = rx_local->fbr[0]->bus_low[entry];
- fbr_entry->word2 = entry;
- fbr_entry++;
- }
-
- /* Set the address and parameters of Free buffer ring 1 (and 0 if
- * required) into the 1310's registers
- */
- writel((u32) (rx_local->fbr[0]->real_physaddr >> 32),
- &rx_dma->fbr1_base_hi);
- writel((u32) rx_local->fbr[0]->real_physaddr, &rx_dma->fbr1_base_lo);
- writel(rx_local->fbr[0]->num_entries - 1, &rx_dma->fbr1_num_des);
- writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset);
-
- /* This variable tracks the free buffer ring 1 full position, so it
- * has to match the above.
- */
- rx_local->fbr[0]->local_full = ET_DMA10_WRAP;
- writel(
- ((rx_local->fbr[0]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
- &rx_dma->fbr1_min_des);
-
-#ifdef USE_FBR0
- /* Now's the best time to initialize FBR0 contents */
- fbr_entry = (struct fbr_desc *) rx_local->fbr[1]->ring_virtaddr;
- for (entry = 0; entry < rx_local->fbr[1]->num_entries; entry++) {
- fbr_entry->addr_hi = rx_local->fbr[1]->bus_high[entry];
- fbr_entry->addr_lo = rx_local->fbr[1]->bus_low[entry];
- fbr_entry->word2 = entry;
- fbr_entry++;
- }
-
- writel((u32) (rx_local->fbr[1]->real_physaddr >> 32),
- &rx_dma->fbr0_base_hi);
- writel((u32) rx_local->fbr[1]->real_physaddr, &rx_dma->fbr0_base_lo);
- writel(rx_local->fbr[1]->num_entries - 1, &rx_dma->fbr0_num_des);
- writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset);
-
- /* This variable tracks the free buffer ring 0 full position, so it
- * has to match the above.
- */
- rx_local->fbr[1]->local_full = ET_DMA10_WRAP;
- writel(
- ((rx_local->fbr[1]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
- &rx_dma->fbr0_min_des);
-#endif
-
- /* Program the number of packets we will receive before generating an
- * interrupt.
- * For version B silicon, this value gets updated once autoneg is
- *complete.
- */
- writel(PARM_RX_NUM_BUFS_DEF, &rx_dma->num_pkt_done);
-
- /* The "time_done" is not working correctly to coalesce interrupts
- * after a given time period, but rather is giving us an interrupt
- * regardless of whether we have received packets.
- * This value gets updated once autoneg is complete.
- */
- writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time);
-
- spin_unlock_irqrestore(&adapter->rcv_lock, flags);
-}
-
-/**
* et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate.
* @adapter: pointer to our adapter structure
*/
@@ -3046,37 +3152,6 @@ void et131x_tx_dma_memory_free(struct et131x_adapter *adapter)
}
/**
- * et131x_config_tx_dma_regs - Set up the tx dma section of the JAGCore.
- * @adapter: pointer to our private adapter structure
- *
- * Configure the transmit engine with the ring buffers we have created
- * and prepare it for use.
- */
-void et131x_config_tx_dma_regs(struct et131x_adapter *adapter)
-{
- struct txdma_regs __iomem *txdma = &adapter->regs->txdma;
-
- /* Load the hardware with the start of the transmit descriptor ring. */
- writel((u32) ((u64)adapter->tx_ring.tx_desc_ring_pa >> 32),
- &txdma->pr_base_hi);
- writel((u32) adapter->tx_ring.tx_desc_ring_pa,
- &txdma->pr_base_lo);
-
- /* Initialise the transmit DMA engine */
- writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des);
-
- /* Load the completion writeback physical address */
- writel((u32)((u64)adapter->tx_ring.tx_status_pa >> 32),
- &txdma->dma_wb_base_hi);
- writel((u32)adapter->tx_ring.tx_status_pa, &txdma->dma_wb_base_lo);
-
- *adapter->tx_ring.tx_status = 0;
-
- writel(0, &txdma->service_request);
- adapter->tx_ring.send_idx = 0;
-}
-
-/**
* et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310
* @adapter: pointer to our adapter structure
*/
@@ -4022,82 +4097,6 @@ void et131x_error_timer_handler(unsigned long data)
}
/**
- * et131x_configure_global_regs - configure JAGCore global regs
- * @adapter: pointer to our adapter structure
- *
- * Used to configure the global registers on the JAGCore
- */
-void et131x_configure_global_regs(struct et131x_adapter *adapter)
-{
- struct global_regs __iomem *regs = &adapter->regs->global;
-
- writel(0, &regs->rxq_start_addr);
- writel(INTERNAL_MEM_SIZE - 1, &regs->txq_end_addr);
-
- if (adapter->registry_jumbo_packet < 2048) {
- /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word
- * block of RAM that the driver can split between Tx
- * and Rx as it desires. Our default is to split it
- * 50/50:
- */
- writel(PARM_RX_MEM_END_DEF, &regs->rxq_end_addr);
- writel(PARM_RX_MEM_END_DEF + 1, &regs->txq_start_addr);
- } else if (adapter->registry_jumbo_packet < 8192) {
- /* For jumbo packets > 2k but < 8k, split 50-50. */
- writel(INTERNAL_MEM_RX_OFFSET, &regs->rxq_end_addr);
- writel(INTERNAL_MEM_RX_OFFSET + 1, &regs->txq_start_addr);
- } else {
- /* 9216 is the only packet size greater than 8k that
- * is available. The Tx buffer has to be big enough
- * for one whole packet on the Tx side. We'll make
- * the Tx 9408, and give the rest to Rx
- */
- writel(0x01b3, &regs->rxq_end_addr);
- writel(0x01b4, &regs->txq_start_addr);
- }
-
- /* Initialize the loopback register. Disable all loopbacks. */
- writel(0, &regs->loopback);
-
- /* MSI Register */
- writel(0, &regs->msi_config);
-
- /* By default, disable the watchdog timer. It will be enabled when
- * a packet is queued.
- */
- writel(0, &regs->watchdog_timer);
-}
-
-/**
- * et131x_adapter_setup - Set the adapter up as per cassini+ documentation
- * @adapter: pointer to our private adapter structure
- *
- * Returns 0 on success, errno on failure (as defined in errno.h)
- */
-void et131x_adapter_setup(struct et131x_adapter *adapter)
-{
- /* Configure the JAGCore */
- et131x_configure_global_regs(adapter);
-
- et1310_config_mac_regs1(adapter);
-
- /* Configure the MMC registers */
- /* All we need to do is initialize the Memory Control Register */
- writel(ET_MMC_ENABLE, &adapter->regs->mmc.mmc_ctrl);
-
- et1310_config_rxmac_regs(adapter);
- et1310_config_txmac_regs(adapter);
-
- et131x_config_rx_dma_regs(adapter);
- et131x_config_tx_dma_regs(adapter);
-
- et1310_config_macstat_regs(adapter);
-
- et1310_phy_power_down(adapter, 0);
- et131x_xcvr_init(adapter);
-}
-
-/**
* et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310
* @adapter: pointer to our private adapter structure
*/