Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:
 "This time, the biggest change is the work of representing hardware
  thermal properties in device tree infrastructure.

  This work includes the introduction of a device tree bindings for
  describing the hardware thermal behavior and limits, and also a parser
  to read and interpret the data, and build thermal zones and thermal
  binding parameters.  It also contains three examples on how to use the
  new representation on sensor devices, using three different drivers to
  accomplish it.  One driver is in thermal subsystem, the TI SoC
  thermal, and the other two drivers are in hwmon subsystem.

  Actually, this would be the first step of the complete work because we
  still need to check other potential drivers to be converted and then
  validate the proposed API.  But the reason why I include it in this
  pull request is that, first, this change does not hurt any others
  without using this approach, second, the principle and concept of this
  change would not break after converting the remaining drivers.  BTW,
  as you can see, there are several points in this change that do not
  belong to thermal subsystem.  Because it has been suggested by Guenter
  R that in such cases, it is recommended to send the complete series
  via one single subsystem.

  Specifics:

   - representing hardware thermal properties in device tree
     infrastructure

   - fix a regression that the imx thermal driver breaks system suspend.

   - introduce ACPI INT3403 thermal driver to retrieve temperature data
     from the INT3403 ACPI device object present on some systems.

   - introduce debug statement for thermal core and step_wise governor.

   - assorted fixes and cleanups for thermal core, cpu cooling, exynos
     thrmal, intel powerclamp and imx thermal driver"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits)
  thermal: remove const flag from .ops of imx thermal
  Thermal: update thermal zone device after setting emul_temp
  intel_powerclamp: Fix cstate counter detection.
  thermal: imx: add necessary clk operation
  Thermal cpu cooling: return error if no valid cpu frequency entry
  thermal: fix cpu_cooling max_level behavior
  thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST
  thermal: debug: add debug statement for core and step_wise
  thermal: imx_thermal: add module device table
  drivers: thermal: Mark function as static in x86_pkg_temp_thermal.c
  thermal:samsung: fix compilation warning
  thermal: imx: correct suspend/resume flow
  thermal: exynos: fix error return code
  Thermal: ACPI INT3403 thermal driver
  MAINTAINERS: add thermal bindings entry in thermal domain
  arm: dts: make OMAP4460 bandgap node to belong to OCP
  arm: dts: make OMAP443x bandgap node to belong to OCP
  arm: dts: add cooling properties on omap5 cpu node
  arm: dts: add omap5 thermal data
  arm: dts: add omap5 CORE thermal data
  ...

14 files changed, 1377 insertions, 49 deletions

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index f35a1f75b15..35c066489a1 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -29,6 +29,19 @@ config THERMAL_HWMON
 	  Say 'Y' here if you want all thermal sensors to
 	  have hwmon sysfs interface too.
 
+config THERMAL_OF
+	bool
+	prompt "APIs to parse thermal data out of device tree"
+	depends on OF
+	default y
+	help
+	  This options provides helpers to add the support to
+	  read and parse thermal data definitions out of the
+	  device tree blob.
+
+	  Say 'Y' here if you need to build thermal infrastructure
+	  based on device tree.
+
 choice
 	prompt "Default Thermal governor"
 	default THERMAL_DEFAULT_GOV_STEP_WISE
@@ -79,6 +92,7 @@ config THERMAL_GOV_USER_SPACE
 config CPU_THERMAL
 	bool "generic cpu cooling support"
 	depends on CPU_FREQ
+	depends on THERMAL_OF
 	help
 	  This implements the generic cpu cooling mechanism through frequency
 	  reduction. An ACPI version of this already exists
@@ -121,7 +135,7 @@ config SPEAR_THERMAL
 
 config RCAR_THERMAL
 	tristate "Renesas R-Car thermal driver"
-	depends on ARCH_SHMOBILE
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  Enable this to plug the R-Car thermal sensor driver into the Linux
 	  thermal framework.
@@ -192,6 +206,13 @@ config X86_PKG_TEMP_THERMAL
 	  two trip points which can be set by user to get notifications via thermal
 	  notification methods.
 
+config ACPI_INT3403_THERMAL
+	tristate "ACPI INT3403 thermal driver"
+	depends on X86 && ACPI
+	help
+	  This driver uses ACPI INT3403 device objects. If present, it will
+	  register each INT3403 thermal sensor as a thermal zone.
+
 menu "Texas Instruments thermal drivers"
 source "drivers/thermal/ti-soc-thermal/Kconfig"
 endmenu
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 584b36319d5..54e4ec9eb5d 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -7,6 +7,7 @@ thermal_sys-y			+= thermal_core.o
 
 # interface to/from other layers providing sensors
 thermal_sys-$(CONFIG_THERMAL_HWMON)		+= thermal_hwmon.o
+thermal_sys-$(CONFIG_THERMAL_OF)		+= of-thermal.o
 
 # governors
 thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE)	+= fair_share.o
@@ -29,3 +30,4 @@ obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
 obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
 obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
+obj-$(CONFIG_ACPI_INT3403_THERMAL)	+= int3403_thermal.o
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 02a46f23d14..4246262c4bd 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -174,6 +174,13 @@ static int get_property(unsigned int cpu, unsigned long input,
 		max_level++;
 	}
 
+	/* No valid cpu frequency entry */
+	if (max_level == 0)
+		return -EINVAL;
+
+	/* max_level is an index, not a counter */
+	max_level--;
+
 	/* get max level */
 	if (property == GET_MAXL) {
 		*output = (unsigned int)max_level;
@@ -181,7 +188,7 @@ static int get_property(unsigned int cpu, unsigned long input,
 	}
 
 	if (property == GET_FREQ)
-		level = descend ? input : (max_level - input - 1);
+		level = descend ? input : (max_level - input);
 
 	for (i = 0, j = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
 		/* ignore invalid entry */
@@ -197,7 +204,7 @@ static int get_property(unsigned int cpu, unsigned long input,
 
 		if (property == GET_LEVEL && (unsigned int)input == freq) {
 			/* get level by frequency */
-			*output = descend ? j : (max_level - j - 1);
+			*output = descend ? j : (max_level - j);
 			return 0;
 		}
 		if (property == GET_FREQ && level == j) {
@@ -417,18 +424,21 @@ static struct notifier_block thermal_cpufreq_notifier_block = {
 };
 
 /**
- * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * __cpufreq_cooling_register - helper function to create cpufreq cooling device
+ * @np: a valid struct device_node to the cooling device device tree node
  * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
  *
  * This interface function registers the cpufreq cooling device with the name
  * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
- * cooling devices.
+ * cooling devices. It also gives the opportunity to link the cooling device
+ * with a device tree node, in order to bind it via the thermal DT code.
  *
  * Return: a valid struct thermal_cooling_device pointer on success,
  * on failure, it returns a corresponding ERR_PTR().
  */
-struct thermal_cooling_device *
-cpufreq_cooling_register(const struct cpumask *clip_cpus)
+static struct thermal_cooling_device *
+__cpufreq_cooling_register(struct device_node *np,
+			   const struct cpumask *clip_cpus)
 {
 	struct thermal_cooling_device *cool_dev;
 	struct cpufreq_cooling_device *cpufreq_dev = NULL;
@@ -467,8 +477,8 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus)
 	snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
 		 cpufreq_dev->id);
 
-	cool_dev = thermal_cooling_device_register(dev_name, cpufreq_dev,
-						   &cpufreq_cooling_ops);
+	cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
+						      &cpufreq_cooling_ops);
 	if (IS_ERR(cool_dev)) {
 		release_idr(&cpufreq_idr, cpufreq_dev->id);
 		kfree(cpufreq_dev);
@@ -488,9 +498,50 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus)
 
 	return cool_dev;
 }
+
+/**
+ * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
+ * cooling devices.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+cpufreq_cooling_register(const struct cpumask *clip_cpus)
+{
+	return __cpufreq_cooling_register(NULL, clip_cpus);
+}
 EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
 
 /**
+ * of_cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @np: a valid struct device_node to the cooling device device tree node
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
+ * cooling devices. Using this API, the cpufreq cooling device will be
+ * linked to the device tree node provided.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+of_cpufreq_cooling_register(struct device_node *np,
+			    const struct cpumask *clip_cpus)
+{
+	if (!np)
+		return ERR_PTR(-EINVAL);
+
+	return __cpufreq_cooling_register(np, clip_cpus);
+}
+EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
+
+/**
  * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
  * @cdev: thermal cooling device pointer.
  *
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 1d6c801c1eb..45af765a319 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -7,6 +7,7 @@
  *
  */
 
+#include <linux/clk.h>
 #include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
@@ -73,6 +74,7 @@ struct imx_thermal_data {
 	unsigned long last_temp;
 	bool irq_enabled;
 	int irq;
+	struct clk *thermal_clk;
 };
 
 static void imx_set_alarm_temp(struct imx_thermal_data *data,
@@ -284,7 +286,7 @@ static int imx_unbind(struct thermal_zone_device *tz,
 	return 0;
 }
 
-static const struct thermal_zone_device_ops imx_tz_ops = {
+static struct thermal_zone_device_ops imx_tz_ops = {
 	.bind = imx_bind,
 	.unbind = imx_unbind,
 	.get_temp = imx_get_temp,
@@ -457,6 +459,22 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->thermal_clk)) {
+		dev_warn(&pdev->dev, "failed to get thermal clk!\n");
+	} else {
+		/*
+		 * Thermal sensor needs clk on to get correct value, normally
+		 * we should enable its clk before taking measurement and disable
+		 * clk after measurement is done, but if alarm function is enabled,
+		 * hardware will auto measure the temperature periodically, so we
+		 * need to keep the clk always on for alarm function.
+		 */
+		ret = clk_prepare_enable(data->thermal_clk);
+		if (ret)
+			dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+	}
+
 	/* Enable measurements at ~ 10 Hz */
 	regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
 	measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
@@ -478,6 +496,8 @@ static int imx_thermal_remove(struct platform_device *pdev)
 
 	/* Disable measurements */
 	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+	if (!IS_ERR(data->thermal_clk))
+		clk_disable_unprepare(data->thermal_clk);
 
 	thermal_zone_device_unregister(data->tz);
 	cpufreq_cooling_unregister(data->cdev);
@@ -490,27 +510,30 @@ static int imx_thermal_suspend(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
 	struct regmap *map = data->tempmon;
-	u32 val;
 
-	regmap_read(map, TEMPSENSE0, &val);
-	if ((val & TEMPSENSE0_POWER_DOWN) == 0) {
-		/*
-		 * If a measurement is taking place, wait for a long enough
-		 * time for it to finish, and then check again.  If it still
-		 * does not finish, something must go wrong.
-		 */
-		udelay(50);
-		regmap_read(map, TEMPSENSE0, &val);
-		if ((val & TEMPSENSE0_POWER_DOWN) == 0)
-			return -ETIMEDOUT;
-	}
+	/*
+	 * Need to disable thermal sensor, otherwise, when thermal core
+	 * try to get temperature before thermal sensor resume, a wrong
+	 * temperature will be read as the thermal sensor is powered
+	 * down.
+	 */
+	regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
+	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+	data->mode = THERMAL_DEVICE_DISABLED;
 
 	return 0;
 }
 
 static int imx_thermal_resume(struct device *dev)
 {
-	/* Nothing to do for now */
+	struct imx_thermal_data *data = dev_get_drvdata(dev);
+	struct regmap *map = data->tempmon;
+
+	/* Enabled thermal sensor after resume */
+	regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
+	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
+	data->mode = THERMAL_DEVICE_ENABLED;
+
 	return 0;
 }
 #endif
@@ -522,6 +545,7 @@ static const struct of_device_id of_imx_thermal_match[] = {
 	{ .compatible = "fsl,imx6q-tempmon", },
 	{ /* end */ }
 };
+MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
 
 static struct platform_driver imx_thermal = {
 	.driver = {
diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c
new file mode 100644
index 00000000000..1301681d9a7
--- /dev/null
+++ b/drivers/thermal/int3403_thermal.c
@@ -0,0 +1,237 @@
+/*
+ * ACPI INT3403 thermal driver
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+
+#define INT3403_TYPE_SENSOR		0x03
+#define INT3403_PERF_CHANGED_EVENT	0x80
+#define INT3403_THERMAL_EVENT		0x90
+
+#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100)
+#define KELVIN_OFFSET	2732
+#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off))
+
+#define ACPI_INT3403_CLASS		"int3403"
+#define ACPI_INT3403_FILE_STATE		"state"
+
+struct int3403_sensor {
+	struct thermal_zone_device *tzone;
+	unsigned long *thresholds;
+};
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzone,
+				unsigned long *temp)
+{
+	struct acpi_device *device = tzone->devdata;
+	unsigned long long tmp;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	*temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET);
+
+	return 0;
+}
+
+static int sys_get_trip_hyst(struct thermal_zone_device *tzone,
+		int trip, unsigned long *temp)
+{
+	struct acpi_device *device = tzone->devdata;
+	unsigned long long hyst;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	*temp = DECI_KELVIN_TO_MILLI_CELSIUS(hyst, KELVIN_OFFSET);
+
+	return 0;
+}
+
+static int sys_get_trip_temp(struct thermal_zone_device *tzone,
+		int trip, unsigned long *temp)
+{
+	struct acpi_device *device = tzone->devdata;
+	struct int3403_sensor *obj = acpi_driver_data(device);
+
+	/*
+	 * get_trip_temp is a mandatory callback but
+	 * PATx method doesn't return any value, so return
+	 * cached value, which was last set from user space.
+	 */
+	*temp = obj->thresholds[trip];
+
+	return 0;
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *thermal,
+		int trip, enum thermal_trip_type *type)
+{
+	/* Mandatory callback, may not mean much here */
+	*type = THERMAL_TRIP_PASSIVE;
+
+	return 0;
+}
+
+int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip,
+							unsigned long temp)
+{
+	struct acpi_device *device = tzone->devdata;
+	acpi_status status;
+	char name[10];
+	int ret = 0;
+	struct int3403_sensor *obj = acpi_driver_data(device);
+
+	snprintf(name, sizeof(name), "PAT%d", trip);
+	if (acpi_has_method(device->handle, name)) {
+		status = acpi_execute_simple_method(device->handle, name,
+				MILLI_CELSIUS_TO_DECI_KELVIN(temp,
+							KELVIN_OFFSET));
+		if (ACPI_FAILURE(status))
+			ret = -EIO;
+		else
+			obj->thresholds[trip] = temp;
+	} else {
+		ret = -EIO;
+		dev_err(&device->dev, "sys_set_trip_temp: method not found\n");
+	}
+
+	return ret;
+}
+
+static struct thermal_zone_device_ops tzone_ops = {
+	.get_temp = sys_get_curr_temp,
+	.get_trip_temp = sys_get_trip_temp,
+	.get_trip_type = sys_get_trip_type,
+	.set_trip_temp = sys_set_trip_temp,
+	.get_trip_hyst =  sys_get_trip_hyst,
+};
+
+static void acpi_thermal_notify(struct acpi_device *device, u32 event)
+{
+	struct int3403_sensor *obj;
+
+	if (!device)
+		return;
+
+	obj = acpi_driver_data(device);
+	if (!obj)
+		return;
+
+	switch (event) {
+	case INT3403_PERF_CHANGED_EVENT:
+		break;
+	case INT3403_THERMAL_EVENT:
+		thermal_zone_device_update(obj->tzone);
+		break;
+	default:
+		dev_err(&device->dev, "Unsupported event [0x%x]\n", event);
+		break;
+	}
+}
+
+static int acpi_int3403_add(struct acpi_device *device)
+{
+	int result = 0;
+	unsigned long long ptyp;
+	acpi_status status;
+	struct int3403_sensor *obj;
+	unsigned long long trip_cnt;
+	int trip_mask = 0;
+
+	if (!device)
+		return -EINVAL;
+
+	status = acpi_evaluate_integer(device->handle, "PTYP", NULL, &ptyp);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	if (ptyp != INT3403_TYPE_SENSOR)
+		return -EINVAL;
+
+	obj = devm_kzalloc(&device->dev, sizeof(*obj), GFP_KERNEL);
+	if (!obj)
+		return -ENOMEM;
+
+	device->driver_data = obj;
+
+	status = acpi_evaluate_integer(device->handle, "PATC", NULL,
+						&trip_cnt);
+	if (ACPI_FAILURE(status))
+		trip_cnt = 0;
+
+	if (trip_cnt) {
+		/* We have to cache, thresholds can't be readback */
+		obj->thresholds = devm_kzalloc(&device->dev,
+					sizeof(*obj->thresholds) * trip_cnt,
+					GFP_KERNEL);
+		if (!obj->thresholds)
+			return -ENOMEM;
+		trip_mask = BIT(trip_cnt) - 1;
+	}
+	obj->tzone = thermal_zone_device_register(acpi_device_bid(device),
+				trip_cnt, trip_mask, device, &tzone_ops,
+				NULL, 0, 0);
+	if (IS_ERR(obj->tzone)) {
+		result = PTR_ERR(obj->tzone);
+		return result;
+	}
+
+	strcpy(acpi_device_name(device), "INT3403");
+	strcpy(acpi_device_class(device), ACPI_INT3403_CLASS);
+
+	return 0;
+}
+
+static int acpi_int3403_remove(struct acpi_device *device)
+{
+	struct int3403_sensor *obj;
+
+	obj = acpi_driver_data(device);
+	thermal_zone_device_unregister(obj->tzone);
+
+	return 0;
+}
+
+ACPI_MODULE_NAME("int3403");
+static const struct acpi_device_id int3403_device_ids[] = {
+	{"INT3403", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3403_device_ids);
+
+static struct acpi_driver acpi_int3403_driver = {
+	.name = "INT3403",
+	.class = ACPI_INT3403_CLASS,
+	.ids = int3403_device_ids,
+	.ops = {
+		.add = acpi_int3403_add,
+		.remove = acpi_int3403_remove,
+		.notify = acpi_thermal_notify,
+		},
+};
+
+module_acpi_driver(acpi_int3403_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ACPI INT3403 thermal driver");
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index d833c8f5b46..a084325f138 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -206,6 +206,15 @@ static void find_target_mwait(void)
 
 }
 
+static bool has_pkg_state_counter(void)
+{
+	u64 tmp;
+	return !rdmsrl_safe(MSR_PKG_C2_RESIDENCY, &tmp) ||
+	       !rdmsrl_safe(MSR_PKG_C3_RESIDENCY, &tmp) ||
+	       !rdmsrl_safe(MSR_PKG_C6_RESIDENCY, &tmp) ||
+	       !rdmsrl_safe(MSR_PKG_C7_RESIDENCY, &tmp);
+}
+
 static u64 pkg_state_counter(void)
 {
 	u64 val;
@@ -498,7 +507,7 @@ static int start_power_clamp(void)
 	struct task_struct *thread;
 
 	/* check if pkg cstate counter is completely 0, abort in this case */
-	if (!pkg_state_counter()) {
+	if (!has_pkg_state_counter()) {
 		pr_err("pkg cstate counter not functional, abort\n");
 		return -EINVAL;
 	}
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
new file mode 100644
index 00000000000..04b1be7fa01
--- /dev/null
+++ b/drivers/thermal/of-thermal.c
@@ -0,0 +1,849 @@
+/*
+ *  of-thermal.c - Generic Thermal Management device tree support.
+ *
+ *  Copyright (C) 2013 Texas Instruments
+ *  Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <linux/thermal.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/string.h>
+
+#include "thermal_core.h"
+
+/***   Private data structures to represent thermal device tree data ***/
+
+/**
+ * struct __thermal_trip - representation of a point in temperature domain
+ * @np: pointer to struct device_node that this trip point was created from
+ * @temperature: temperature value in miliCelsius
+ * @hysteresis: relative hysteresis in miliCelsius
+ * @type: trip point type
+ */
+
+struct __thermal_trip {
+	struct device_node *np;
+	unsigned long int temperature;
+	unsigned long int hysteresis;
+	enum thermal_trip_type type;
+};
+
+/**
+ * struct __thermal_bind_param - a match between trip and cooling device
+ * @cooling_device: a pointer to identify the referred cooling device
+ * @trip_id: the trip point index
+ * @usage: the percentage (from 0 to 100) of cooling contribution
+ * @min: minimum cooling state used at this trip point
+ * @max: maximum cooling state used at this trip point
+ */
+
+struct __thermal_bind_params {
+	struct device_node *cooling_device;
+	unsigned int trip_id;
+	unsigned int usage;
+	unsigned long min;
+	unsigned long max;
+};
+
+/**
+ * struct __thermal_zone - internal representation of a thermal zone
+ * @mode: current thermal zone device mode (enabled/disabled)
+ * @passive_delay: polling interval while passive cooling is activated
+ * @polling_delay: zone polling interval
+ * @ntrips: number of trip points
+ * @trips: an array of trip points (0..ntrips - 1)
+ * @num_tbps: number of thermal bind params
+ * @tbps: an array of thermal bind params (0..num_tbps - 1)
+ * @sensor_data: sensor private data used while reading temperature and trend
+ * @get_temp: sensor callback to read temperature
+ * @get_trend: sensor callback to read temperature trend
+ */
+
+struct __thermal_zone {
+	enum thermal_device_mode mode;
+	int passive_delay;
+	int polling_delay;
+
+	/* trip data */
+	int ntrips;
+	struct __thermal_trip *trips;
+
+	/* cooling binding data */
+	int num_tbps;
+	struct __thermal_bind_params *tbps;
+
+	/* sensor interface */
+	void *sensor_data;
+	int (*get_temp)(void *, long *);
+	int (*get_trend)(void *, long *);
+};
+
+/***   DT thermal zone device callbacks   ***/
+
+static int of_thermal_get_temp(struct thermal_zone_device *tz,
+			       unsigned long *temp)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	if (!data->get_temp)
+		return -EINVAL;
+
+	return data->get_temp(data->sensor_data, temp);
+}
+
+static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
+				enum thermal_trend *trend)
+{
+	struct __thermal_zone *data = tz->devdata;
+	long dev_trend;
+	int r;
+
+	if (!data->get_trend)
+		return -EINVAL;
+
+	r = data->get_trend(data->sensor_data, &dev_trend);
+	if (r)
+		return r;
+
+	/* TODO: These intervals might have some thresholds, but in core code */
+	if (dev_trend > 0)
+		*trend = THERMAL_TREND_RAISING;
+	else if (dev_trend < 0)
+		*trend = THERMAL_TREND_DROPPING;
+	else
+		*trend = THERMAL_TREND_STABLE;
+
+	return 0;
+}
+
+static int of_thermal_bind(struct thermal_zone_device *thermal,
+			   struct thermal_cooling_device *cdev)
+{
+	struct __thermal_zone *data = thermal->devdata;
+	int i;
+
+	if (!data || IS_ERR(data))
+		return -ENODEV;
+
+	/* find where to bind */
+	for (i = 0; i < data->num_tbps; i++) {
+		struct __thermal_bind_params *tbp = data->tbps + i;
+
+		if (tbp->cooling_device == cdev->np) {
+			int ret;
+
+			ret = thermal_zone_bind_cooling_device(thermal,
+						tbp->trip_id, cdev,
+						tbp->min,
+						tbp->max);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int of_thermal_unbind(struct thermal_zone_device *thermal,
+			     struct thermal_cooling_device *cdev)
+{
+	struct __thermal_zone *data = thermal->devdata;
+	int i;
+
+	if (!data || IS_ERR(data))
+		return -ENODEV;
+
+	/* find where to unbind */
+	for (i = 0; i < data->num_tbps; i++) {
+		struct __thermal_bind_params *tbp = data->tbps + i;
+
+		if (tbp->cooling_device == cdev->np) {
+			int ret;
+
+			ret = thermal_zone_unbind_cooling_device(thermal,
+						tbp->trip_id, cdev);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int of_thermal_get_mode(struct thermal_zone_device *tz,
+			       enum thermal_device_mode *mode)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	*mode = data->mode;
+
+	return 0;
+}
+
+static int of_thermal_set_mode(struct thermal_zone_device *tz,
+			       enum thermal_device_mode mode)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	mutex_lock(&tz->lock);
+
+	if (mode == THERMAL_DEVICE_ENABLED)
+		tz->polling_delay = data->polling_delay;
+	else
+		tz->polling_delay = 0;
+
+	mutex_unlock(&tz->lock);
+
+	data->mode = mode;
+	thermal_zone_device_update(tz);
+
+	return 0;
+}
+
+static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
+				    enum thermal_trip_type *type)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	if (trip >= data->ntrips || trip < 0)
+		return -EDOM;
+
+	*type = data->trips[trip].type;
+
+	return 0;
+}
+
+static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
+				    unsigned long *temp)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	if (trip >= data->ntrips || trip < 0)
+		return -EDOM;
+
+	*temp = data->trips[trip].temperature;
+
+	return 0;
+}
+
+static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
+				    unsigned long temp)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	if (trip >= data->ntrips || trip < 0)
+		return -EDOM;
+
+	/* thermal framework should take care of data->mask & (1 << trip) */
+	data->trips[trip].temperature = temp;
+
+	return 0;
+}
+
+static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
+				    unsigned long *hyst)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	if (trip >= data->ntrips || trip < 0)
+		return -EDOM;
+
+	*hyst = data->trips[trip].hysteresis;
+
+	return 0;
+}
+
+static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
+				    unsigned long hyst)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	if (trip >= data->ntrips || trip < 0)
+		return -EDOM;
+
+	/* thermal framework should take care of data->mask & (1 << trip) */
+	data->trips[trip].hysteresis = hyst;
+
+	return 0;
+}
+
+static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
+				    unsigned long *temp)
+{
+	struct __thermal_zone *data = tz->devdata;
+	int i;
+
+	for (i = 0; i < data->ntrips; i++)
+		if (data->trips[i].type == THERMAL_TRIP_CRITICAL) {
+			*temp = data->trips[i].temperature;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static struct thermal_zone_device_ops of_thermal_ops = {
+	.get_mode = of_thermal_get_mode,
+	.set_mode = of_thermal_set_mode,
+
+	.get_trip_type = of_thermal_get_trip_type,
+	.get_trip_temp = of_thermal_get_trip_temp,
+	.set_trip_temp = of_thermal_set_trip_temp,
+	.get_trip_hyst = of_thermal_get_trip_hyst,
+	.set_trip_hyst = of_thermal_set_trip_hyst,
+	.get_crit_temp = of_thermal_get_crit_temp,
+
+	.bind = of_thermal_bind,
+	.unbind = of_thermal_unbind,
+};
+
+/***   sensor API   ***/
+
+static struct thermal_zone_device *
+thermal_zone_of_add_sensor(struct device_node *zone,
+			   struct device_node *sensor, void *data,
+			   int (*get_temp)(void *, long *),
+			   int (*get_trend)(void *, long *))
+{
+	struct thermal_zone_device *tzd;
+	struct __thermal_zone *tz;
+
+	tzd = thermal_zone_get_zone_by_name(zone->name);
+	if (IS_ERR(tzd))
+		return ERR_PTR(-EPROBE_DEFER);
+
+	tz = tzd->devdata;
+
+	mutex_lock(&tzd->lock);
+	tz->get_temp = get_temp;
+	tz->get_trend = get_trend;
+	tz->sensor_data = data;
+
+	tzd->ops->get_temp = of_thermal_get_temp;
+	tzd->ops->get_trend = of_thermal_get_trend;
+	mutex_unlock(&tzd->lock);
+
+	return tzd;
+}
+
+/**
+ * thermal_zone_of_sensor_register - registers a sensor to a DT thermal zone
+ * @dev: a valid struct device pointer of a sensor device. Must contain
+ *       a valid .of_node, for the sensor node.
+ * @sensor_id: a sensor identifier, in case the sensor IP has more
+ *             than one sensors
+ * @data: a private pointer (owned by the caller) that will be passed
+ *        back, when a temperature reading is needed.
+ * @get_temp: a pointer to a function that reads the sensor temperature.
+ * @get_trend: a pointer to a function that reads the sensor temperature trend.
+ *
+ * This function will search the list of thermal zones described in device
+ * tree and look for the zone that refer to the sensor device pointed by
+ * @dev->of_node as temperature providers. For the zone pointing to the
+ * sensor node, the sensor will be added to the DT thermal zone device.
+ *
+ * The thermal zone temperature is provided by the @get_temp function
+ * pointer. When called, it will have the private pointer @data back.
+ *
+ * The thermal zone temperature trend is provided by the @get_trend function
+ * pointer. When called, it will have the private pointer @data back.
+ *
+ * TODO:
+ * 01 - This function must enqueue the new sensor instead of using
+ * it as the only source of temperature values.
+ *
+ * 02 - There must be a way to match the sensor with all thermal zones
+ * that refer to it.
+ *
+ * Return: On success returns a valid struct thermal_zone_device,
+ * otherwise, it returns a corresponding ERR_PTR(). Caller must
+ * check the return value with help of IS_ERR() helper.
+ */
+struct thermal_zone_device *
+thermal_zone_of_sensor_register(struct device *dev, int sensor_id,
+				void *data, int (*get_temp)(void *, long *),
+				int (*get_trend)(void *, long *))
+{
+	struct device_node *np, *child, *sensor_np;
+
+	np = of_find_node_by_name(NULL, "thermal-zones");
+	if (!np)
+		return ERR_PTR(-ENODEV);
+
+	if (!dev || !dev->of_node)
+		return ERR_PTR(-EINVAL);
+
+	sensor_np = dev->of_node;
+
+	for_each_child_of_node(np, child) {
+		struct of_phandle_args sensor_specs;
+		int ret, id;
+
+		/* For now, thermal framework supports only 1 sensor per zone */
+		ret = of_parse_phandle_with_args(child, "thermal-sensors",
+						 "#thermal-sensor-cells",
+						 0, &sensor_specs);
+		if (ret)
+			continue;
+
+		if (sensor_specs.args_count >= 1) {
+			id = sensor_specs.args[0];
+			WARN(sensor_specs.args_count > 1,
+			     "%s: too many cells in sensor specifier %d\n",
+			     sensor_specs.np->name, sensor_specs.args_count);
+		} else {
+			id = 0;
+		}
+
+		if (sensor_specs.np == sensor_np && id == sensor_id) {
+			of_node_put(np);
+			return thermal_zone_of_add_sensor(child, sensor_np,
+							  data,
+							  get_temp,
+							  get_trend);
+		}
+	}
+	of_node_put(np);
+
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register);
+
+/**
+ * thermal_zone_of_sensor_unregister - unregisters a sensor from a DT thermal zone
+ * @dev: a valid struct device pointer of a sensor device. Must contain
+ *       a valid .of_node, for the sensor node.
+ * @tzd: a pointer to struct thermal_zone_device where the sensor is registered.
+ *
+ * This function removes the sensor callbacks and private data from the
+ * thermal zone device registered with thermal_zone_of_sensor_register()
+ * API. It will also silent the zone by remove the .get_temp() and .get_trend()
+ * thermal zone device callbacks.
+ *
+ * TODO: When the support to several sensors per zone is added, this
+ * function must search the sensor list based on @dev parameter.
+ *
+ */
+void thermal_zone_of_sensor_unregister(struct device *dev,
+				       struct thermal_zone_device *tzd)
+{
+	struct __thermal_zone *tz;
+
+	if (!dev || !tzd || !tzd->devdata)
+		return;
+
+	tz = tzd->devdata;
+
+	/* no __thermal_zone, nothing to be done */
+	if (!tz)
+		return;
+
+	mutex_lock(&tzd->lock);
+	tzd->ops->get_temp = NULL;
+	tzd->ops->get_trend = NULL;
+
+	tz->get_temp = NULL;
+	tz->get_trend = NULL;
+	tz->sensor_data = NULL;
+	mutex_unlock(&tzd->lock);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister);
+
+/***   functions parsing device tree nodes   ***/
+
+/**
+ * thermal_of_populate_bind_params - parse and fill cooling map data
+ * @np: DT node containing a cooling-map node
+ * @__tbp: data structure to be filled with cooling map info
+ * @trips: array of thermal zone trip points
+ * @ntrips: number of trip points inside trips.
+ *
+ * This function parses a cooling-map type of node represented by
+ * @np parameter and fills the read data into @__tbp data structure.
+ * It needs the already parsed array of trip points of the thermal zone
+ * in consideration.
+ *
+ * Return: 0 on success, proper error code otherwise
+ */
+static int thermal_of_populate_bind_params(struct device_node *np,
+					   struct __thermal_bind_params *__tbp,
+					   struct __thermal_trip *trips,
+					   int ntrips)
+{
+	struct of_phandle_args cooling_spec;
+	struct device_node *trip;
+	int ret, i;
+	u32 prop;
+
+	/* Default weight. Usage is optional */
+	__tbp->usage = 0;
+	ret = of_property_read_u32(np, "contribution", &prop);
+	if (ret == 0)
+		__tbp->usage = prop;
+
+	trip = of_parse_phandle(np, "trip", 0);
+	if (!trip) {
+		pr_err("missing trip property\n");
+		return -ENODEV;
+	}
+
+	/* match using device_node */
+	for (i = 0; i < ntrips; i++)
+		if (trip == trips[i].np) {
+			__tbp->trip_id = i;
+			break;
+		}
+
+	if (i == ntrips) {
+		ret = -ENODEV;
+		goto end;
+	}
+
+	ret = of_parse_phandle_with_args(np, "cooling-device", "#cooling-cells",
+					 0, &cooling_spec);
+	if (ret < 0) {
+		pr_err("missing cooling_device property\n");
+		goto end;
+	}
+	__tbp->cooling_device = cooling_spec.np;
+	if (cooling_spec.args_count >= 2) { /* at least min and max */
+		__tbp->min = cooling_spec.args[0];
+		__tbp->max = cooling_spec.args[1];
+	} else {
+		pr_err("wrong reference to cooling device, missing limits\n");
+	}
+
+end:
+	of_node_put(trip);
+
+	return ret;
+}
+
+/**
+ * It maps 'enum thermal_trip_type' found in include/linux/thermal.h
+ * into the device tree binding of 'trip', property type.
+ */
+static const char * const trip_types[] = {
+	[THERMAL_TRIP_ACTIVE]	= "active",
+	[THERMAL_TRIP_PASSIVE]	= "passive",
+	[THERMAL_TRIP_HOT]	= "hot",
+	[THERMAL_TRIP_CRITICAL]	= "critical",
+};
+
+/**
+ * thermal_of_get_trip_type - Get phy mode for given device_node
+ * @np:	Pointer to the given device_node
+ * @type: Pointer to resulting trip type
+ *
+ * The function gets trip type string from property 'type',
+ * and store its index in trip_types table in @type,
+ *
+ * Return: 0 on success, or errno in error case.
+ */
+static int thermal_of_get_trip_type(struct device_node *np,
+				    enum thermal_trip_type *type)
+{
+	const char *t;
+	int err, i;
+
+	err = of_property_read_string(np, "type", &t);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(trip_types); i++)
+		if (!strcasecmp(t, trip_types[i])) {
+			*type = i;
+			return 0;
+		}
+
+	return -ENODEV;
+}
+
+/**
+ * thermal_of_populate_trip - parse and fill one trip point data
+ * @np: DT node containing a trip point node
+ * @trip: trip point data structure to be filled up
+ *
+ * This function parses a trip point type of node represented by
+ * @np parameter and fills the read data into @trip data structure.
+ *
+ * Return: 0 on success, proper error code otherwise
+ */
+static int thermal_of_populate_trip(struct device_node *np,
+				    struct __thermal_trip *trip)
+{
+	int prop;
+	int ret;
+
+	ret = of_property_read_u32(np, "temperature", &prop);
+	if (ret < 0) {
+		pr_err("missing temperature property\n");
+		return ret;
+	}
+	trip->temperature = prop;
+
+	ret = of_property_read_u32(np, "hysteresis", &prop);
+	if (ret < 0) {
+		pr_err("missing hysteresis property\n");
+		return ret;
+	}
+	trip->hysteresis = prop;
+
+	ret = thermal_of_get_trip_type(np, &trip->type);
+	if (ret < 0) {
+		pr_err("wrong trip type property\n");
+		return ret;
+	}
+
+	/* Required for cooling map matching */
+	trip->np = np;
+
+	return 0;
+}
+
+/**
+ * thermal_of_build_thermal_zone - parse and fill one thermal zone data
+ * @np: DT node containing a thermal zone node
+ *
+ * This function parses a thermal zone type of node represented by
+ * @np parameter and fills the read data into a __thermal_zone data structure
+ * and return this pointer.
+ *
+ * TODO: Missing properties to parse: thermal-sensor-names and coefficients
+ *
+ * Return: On success returns a valid struct __thermal_zone,
+ * otherwise, it returns a corresponding ERR_PTR(). Caller must
+ * check the return value with help of IS_ERR() helper.
+ */
+static struct __thermal_zone *
+thermal_of_build_thermal_zone(struct device_node *np)
+{
+	struct device_node *child = NULL, *gchild;
+	struct __thermal_zone *tz;
+	int ret, i;
+	u32 prop;
+
+	if (!np) {
+		pr_err("no thermal zone np\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	tz = kzalloc(sizeof(*tz), GFP_KERNEL);
+	if (!tz)
+		return ERR_PTR(-ENOMEM);
+
+	ret = of_property_read_u32(np, "polling-delay-passive", &prop);
+	if (ret < 0) {
+		pr_err("missing polling-delay-passive property\n");
+		goto free_tz;
+	}
+	tz->passive_delay = prop;
+
+	ret = of_property_read_u32(np, "polling-delay", &prop);
+	if (ret < 0) {
+		pr_err("missing polling-delay property\n");
+		goto free_tz;
+	}
+	tz->polling_delay = prop;
+
+	/* trips */
+	child = of_get_child_by_name(np, "trips");
+
+	/* No trips provided */
+	if (!child)
+		goto finish;
+
+	tz->ntrips = of_get_child_count(child);
+	if (tz->ntrips == 0) /* must have at least one child */
+		goto finish;
+
+	tz->trips = kzalloc(tz->ntrips * sizeof(*tz->trips), GFP_KERNEL);
+	if (!tz->trips) {
+		ret = -ENOMEM;
+		goto free_tz;
+	}
+
+	i = 0;
+	for_each_child_of_node(child, gchild) {
+		ret = thermal_of_populate_trip(gchild, &tz->trips[i++]);
+		if (ret)
+			goto free_trips;
+	}
+
+	of_node_put(child);
+
+	/* cooling-maps */
+	child = of_get_child_by_name(np, "cooling-maps");
+
+	/* cooling-maps not provided */
+	if (!child)
+		goto finish;
+
+	tz->num_tbps = of_get_child_count(child);
+	if (tz->num_tbps == 0)
+		goto finish;
+
+	tz->tbps = kzalloc(tz->num_tbps * sizeof(*tz->tbps), GFP_KERNEL);
+	if (!tz->tbps) {
+		ret = -ENOMEM;
+		goto free_trips;
+	}
+
+	i = 0;
+	for_each_child_of_node(child, gchild)
+		ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++],
+						      tz->trips, tz->ntrips);
+		if (ret)
+			goto free_tbps;
+
+finish:
+	of_node_put(child);
+	tz->mode = THERMAL_DEVICE_DISABLED;
+
+	return tz;
+
+free_tbps:
+	kfree(tz->tbps);
+free_trips:
+	kfree(tz->trips);
+free_tz:
+	kfree(tz);
+	of_node_put(child);
+
+	return ERR_PTR(ret);
+}
+
+static inline void of_thermal_free_zone(struct __thermal_zone *tz)
+{
+	kfree(tz->tbps);
+	kfree(tz->trips);
+	kfree(tz);
+}
+
+/**
+ * of_parse_thermal_zones - parse device tree thermal data
+ *
+ * Initialization function that can be called by machine initialization
+ * code to parse thermal data and populate the thermal framework
+ * with hardware thermal zones info. This function only parses thermal zones.
+ * Cooling devices and sensor devices nodes are supposed to be parsed
+ * by their respective drivers.
+ *
+ * Return: 0 on success, proper error code otherwise
+ *
+ */
+int __init of_parse_thermal_zones(void)
+{
+	struct device_node *np, *child;
+	struct __thermal_zone *tz;
+	struct thermal_zone_device_ops *ops;
+
+	np = of_find_node_by_name(NULL, "thermal-zones");
+	if (!np) {
+		pr_debug("unable to find thermal zones\n");
+		return 0; /* Run successfully on systems without thermal DT */
+	}
+
+	for_each_child_of_node(np, child) {
+		struct thermal_zone_device *zone;
+		struct thermal_zone_params *tzp;
+
+		tz = thermal_of_build_thermal_zone(child);
+		if (IS_ERR(tz)) {
+			pr_err("failed to build thermal zone %s: %ld\n",
+			       child->name,
+			       PTR_ERR(tz));
+			continue;
+		}
+
+		ops = kmemdup(&of_thermal_ops, sizeof(*ops), GFP_KERNEL);
+		if (!ops)
+			goto exit_free;
+
+		tzp = kzalloc(sizeof(*tzp), GFP_KERNEL);
+		if (!tzp) {
+			kfree(ops);
+			goto exit_free;
+		}
+
+		/* No hwmon because there might be hwmon drivers registering */
+		tzp->no_hwmon = true;
+
+		zone = thermal_zone_device_register(child->name, tz->ntrips,
+						    0, tz,
+						    ops, tzp,
+						    tz->passive_delay,
+						    tz->polling_delay);
+		if (IS_ERR(zone)) {
+			pr_err("Failed to build %s zone %ld\n", child->name,
+			       PTR_ERR(zone));
+			kfree(tzp);
+			kfree(ops);
+			of_thermal_free_zone(tz);
+			/* attempting to build remaining zones still */
+		}
+	}
+
+	return 0;
+
+exit_free:
+	of_thermal_free_zone(tz);
+
+	/* no memory available, so free what we have built */
+	of_thermal_destroy_zones();
+
+	return -ENOMEM;
+}
+
+/**
+ * of_thermal_destroy_zones - remove all zones parsed and allocated resources
+ *
+ * Finds all zones parsed and added to the thermal framework and remove them
+ * from the system, together with their resources.
+ *
+ */
+void of_thermal_destroy_zones(void)
+{
+	struct device_node *np, *child;
+
+	np = of_find_node_by_name(NULL, "thermal-zones");
+	if (!np) {
+		pr_err("unable to find thermal zones\n");
+		return;
+	}
+
+	for_each_child_of_node(np, child) {
+		struct thermal_zone_device *zone;
+
+		zone = thermal_zone_get_zone_by_name(child->name);
+		if (IS_ERR(zone))
+			continue;
+
+		thermal_zone_device_unregister(zone);
+		kfree(zone->tzp);
+		kfree(zone->ops);
+		of_thermal_free_zone(zone->devdata);
+	}
+}
diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
index c2301da08ac..3f5ad25ddca 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.c
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -280,7 +280,7 @@ static int exynos_get_trend(struct thermal_zone_device *thermal,
 	return 0;
 }
 /* Operation callback functions for thermal zone */
-static struct thermal_zone_device_ops const exynos_dev_ops = {
+static struct thermal_zone_device_ops exynos_dev_ops = {
 	.bind = exynos_bind,
 	.unbind = exynos_unbind,
 	.get_temp = exynos_get_temp,
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 32f38b90c4f..0d96a510389 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -205,6 +205,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 skip_calib_data:
 	if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
 		dev_err(&pdev->dev, "Invalid max trigger level\n");
+		ret = -EINVAL;
 		goto out;
 	}
 
diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index d89e781b0a1..f251521baaa 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -60,6 +60,7 @@ static unsigned long get_target_state(struct thermal_instance *instance,
 	 */
 	cdev->ops->get_cur_state(cdev, &cur_state);
 	next_target = instance->target;
+	dev_dbg(&cdev->device, "cur_state=%ld\n", cur_state);
 
 	switch (trend) {
 	case THERMAL_TREND_RAISING:
@@ -131,6 +132,9 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
 	if (tz->temperature >= trip_temp)
 		throttle = true;
 
+	dev_dbg(&tz->device, "Trip%d[type=%d,temp=%ld]:trend=%d,throttle=%d\n",
+				trip, trip_type, trip_temp, trend, throttle);
+
 	mutex_lock(&tz->lock);
 
 	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
@@ -139,6 +143,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
 
 		old_target = instance->target;
 		instance->target = get_target_state(instance, trend, throttle);
+		dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n",
+					old_target, (int)instance->target);
 
 		if (old_target == instance->target)
 			continue;
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index f1d511a9475..338a88bf666 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -34,6 +34,7 @@
 #include <linux/thermal.h>
 #include <linux/reboot.h>
 #include <linux/string.h>
+#include <linux/of.h>
 #include <net/netlink.h>
 #include <net/genetlink.h>
 
@@ -403,7 +404,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
 	enum thermal_trip_type type;
 #endif
 
-	if (!tz || IS_ERR(tz))
+	if (!tz || IS_ERR(tz) || !tz->ops->get_temp)
 		goto exit;
 
 	mutex_lock(&tz->lock);
@@ -450,12 +451,18 @@ static void update_temperature(struct thermal_zone_device *tz)
 	tz->last_temperature = tz->temperature;
 	tz->temperature = temp;
 	mutex_unlock(&tz->lock);
+
+	dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
+				tz->last_temperature, tz->temperature);
 }
 
 void thermal_zone_device_update(struct thermal_zone_device *tz)
 {
 	int count;
 
+	if (!tz->ops->get_temp)
+		return;
+
 	update_temperature(tz);
 
 	for (count = 0; count < tz->trips; count++)
@@ -774,6 +781,9 @@ emul_temp_store(struct device *dev, struct device_attribute *attr,
 		ret = tz->ops->set_emul_temp(tz, temperature);
 	}
 
+	if (!ret)
+		thermal_zone_device_update(tz);
+
 	return ret ? ret : count;
 }
 static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store);
@@ -1052,7 +1062,8 @@ static struct class thermal_class = {
 };
 
 /**
- * thermal_cooling_device_register() - register a new thermal cooling device
+ * __thermal_cooling_device_register() - register a new thermal cooling device
+ * @np:		a pointer to a device tree node.
  * @type:	the thermal cooling device type.
  * @devdata:	device private data.
  * @ops:		standard thermal cooling devices callbacks.
@@ -1060,13 +1071,16 @@ static struct class thermal_class = {
  * This interface function adds a new thermal cooling device (fan/processor/...)
  * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
  * to all the thermal zone devices registered at the same time.
+ * It also gives the opportunity to link the cooling device to a device tree
+ * node, so that it can be bound to a thermal zone created out of device tree.
  *
  * Return: a pointer to the created struct thermal_cooling_device or an
  * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
  */
-struct thermal_cooling_device *
-thermal_cooling_device_register(char *type, void *devdata,
-				const struct thermal_cooling_device_ops *ops)
+static struct thermal_cooling_device *
+__thermal_cooling_device_register(struct device_node *np,
+				  char *type, void *devdata,
+				  const struct thermal_cooling_device_ops *ops)
 {
 	struct thermal_cooling_device *cdev;
 	int result;
@@ -1091,6 +1105,7 @@ thermal_cooling_device_register(char *type, void *devdata,
 	strlcpy(cdev->type, type ? : "", sizeof(cdev->type));
 	mutex_init(&cdev->lock);
 	INIT_LIST_HEAD(&cdev->thermal_instances);
+	cdev->np = np;
 	cdev->ops = ops;
 	cdev->updated = true;
 	cdev->device.class = &thermal_class;
@@ -1133,9 +1148,53 @@ unregister:
 	device_unregister(&cdev->device);
 	return ERR_PTR(result);
 }
+
+/**
+ * thermal_cooling_device_register() - register a new thermal cooling device
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:		standard thermal cooling devices callbacks.
+ *
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+thermal_cooling_device_register(char *type, void *devdata,
+				const struct thermal_cooling_device_ops *ops)
+{
+	return __thermal_cooling_device_register(NULL, type, devdata, ops);
+}
 EXPORT_SYMBOL_GPL(thermal_cooling_device_register);
 
 /**
+ * thermal_of_cooling_device_register() - register an OF thermal cooling device
+ * @np:		a pointer to a device tree node.
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:		standard thermal cooling devices callbacks.
+ *
+ * This function will register a cooling device with device tree node reference.
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+thermal_of_cooling_device_register(struct device_node *np,
+				   char *type, void *devdata,
+				   const struct thermal_cooling_device_ops *ops)
+{
+	return __thermal_cooling_device_register(np, type, devdata, ops);
+}
+EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register);
+
+/**
  * thermal_cooling_device_unregister - removes the registered thermal cooling device
  * @cdev:	the thermal cooling device to remove.
  *
@@ -1207,6 +1266,8 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
 	mutex_lock(&cdev->lock);
 	/* Make sure cdev enters the deepest cooling state */
 	list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
+		dev_dbg(&cdev->device, "zone%d->target=%lu\n",
+				instance->tz->id, instance->target);
 		if (instance->target == THERMAL_NO_TARGET)
 			continue;
 		if (instance->target > target)
@@ -1215,6 +1276,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
 	mutex_unlock(&cdev->lock);
 	cdev->ops->set_cur_state(cdev, target);
 	cdev->updated = true;
+	dev_dbg(&cdev->device, "set to state %lu\n", target);
 }
 EXPORT_SYMBOL(thermal_cdev_update);
 
@@ -1370,7 +1432,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz)
  */
 struct thermal_zone_device *thermal_zone_device_register(const char *type,
 	int trips, int mask, void *devdata,
-	const struct thermal_zone_device_ops *ops,
+	struct thermal_zone_device_ops *ops,
 	const struct thermal_zone_params *tzp,
 	int passive_delay, int polling_delay)
 {
@@ -1386,7 +1448,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
 	if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
 		return ERR_PTR(-EINVAL);
 
-	if (!ops || !ops->get_temp)
+	if (!ops)
 		return ERR_PTR(-EINVAL);
 
 	if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
@@ -1490,6 +1552,9 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
 
 	INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
 
+	if (!tz->ops->get_temp)
+		thermal_zone_device_set_polling(tz, 0);
+
 	thermal_zone_device_update(tz);
 
 	if (!result)
@@ -1740,8 +1805,14 @@ static int __init thermal_init(void)
 	if (result)
 		goto unregister_class;
 
+	result = of_parse_thermal_zones();
+	if (result)
+		goto exit_netlink;
+
 	return 0;
 
+exit_netlink:
+	genetlink_exit();
 unregister_governors:
 	thermal_unregister_governors();
 unregister_class:
@@ -1757,6 +1828,7 @@ error:
 
 static void __exit thermal_exit(void)
 {
+	of_thermal_destroy_zones();
 	genetlink_exit();
 	class_unregister(&thermal_class);
 	thermal_unregister_governors();
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 7cf2f662625..3db339fb636 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -77,4 +77,13 @@ static inline int thermal_gov_user_space_register(void) { return 0; }
 static inline void thermal_gov_user_space_unregister(void) {}
 #endif /* CONFIG_THERMAL_GOV_USER_SPACE */
 
+/* device tree support */
+#ifdef CONFIG_THERMAL_OF
+int of_parse_thermal_zones(void);
+void of_thermal_destroy_zones(void);
+#else
+static inline int of_parse_thermal_zones(void) { return 0; }
+static inline void of_thermal_destroy_zones(void) { }
+#endif
+
 #endif /* __THERMAL_CORE_H__ */
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 5a47cc8c8f8..9eec26dc044 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -31,6 +31,7 @@
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/cpu_cooling.h>
+#include <linux/of.h>
 
 #include "ti-thermal.h"
 #include "ti-bandgap.h"
@@ -44,6 +45,7 @@ struct ti_thermal_data {
 	enum thermal_device_mode mode;
 	struct work_struct thermal_wq;
 	int sensor_id;
+	bool our_zone;
 };
 
 static void ti_thermal_work(struct work_struct *work)
@@ -75,11 +77,10 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
 
 /* thermal zone ops */
 /* Get temperature callback function for thermal zone*/
-static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
-				      unsigned long *temp)
+static inline int __ti_thermal_get_temp(void *devdata, long *temp)
 {
 	struct thermal_zone_device *pcb_tz = NULL;
-	struct ti_thermal_data *data = thermal->devdata;
+	struct ti_thermal_data *data = devdata;
 	struct ti_bandgap *bgp;
 	const struct ti_temp_sensor *s;
 	int ret, tmp, slope, constant;
@@ -118,6 +119,14 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
 	return ret;
 }
 
+static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
+				      unsigned long *temp)
+{
+	struct ti_thermal_data *data = thermal->devdata;
+
+	return __ti_thermal_get_temp(data, temp);
+}
+
 /* Bind callback functions for thermal zone */
 static int ti_thermal_bind(struct thermal_zone_device *thermal,
 			   struct thermal_cooling_device *cdev)
@@ -230,11 +239,9 @@ static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-/* Get the temperature trend callback functions for thermal zone */
-static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
-				int trip, enum thermal_trend *trend)
+static int __ti_thermal_get_trend(void *p, long *trend)
 {
-	struct ti_thermal_data *data = thermal->devdata;
+	struct ti_thermal_data *data = p;
 	struct ti_bandgap *bgp;
 	int id, tr, ret = 0;
 
@@ -245,6 +252,22 @@ static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
 	if (ret)
 		return ret;
 
+	*trend = tr;
+
+	return 0;
+}
+
+/* Get the temperature trend callback functions for thermal zone */
+static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
+				int trip, enum thermal_trend *trend)
+{
+	int ret;
+	long tr;
+
+	ret = __ti_thermal_get_trend(thermal->devdata, &tr);
+	if (ret)
+		return ret;
+
 	if (tr > 0)
 		*trend = THERMAL_TREND_RAISING;
 	else if (tr < 0)
@@ -308,16 +331,23 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 	if (!data)
 		return -EINVAL;
 
-	/* Create thermal zone */
-	data->ti_thermal = thermal_zone_device_register(domain,
+	/* in case this is specified by DT */
+	data->ti_thermal = thermal_zone_of_sensor_register(bgp->dev, id,
+					data, __ti_thermal_get_temp,
+					__ti_thermal_get_trend);
+	if (IS_ERR(data->ti_thermal)) {
+		/* Create thermal zone */
+		data->ti_thermal = thermal_zone_device_register(domain,
 				OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops,
 				NULL, FAST_TEMP_MONITORING_RATE,
 				FAST_TEMP_MONITORING_RATE);
-	if (IS_ERR(data->ti_thermal)) {
-		dev_err(bgp->dev, "thermal zone device is NULL\n");
-		return PTR_ERR(data->ti_thermal);
+		if (IS_ERR(data->ti_thermal)) {
+			dev_err(bgp->dev, "thermal zone device is NULL\n");
+			return PTR_ERR(data->ti_thermal);
+		}
+		data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+		data->our_zone = true;
 	}
-	data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
 	ti_bandgap_set_sensor_data(bgp, id, data);
 	ti_bandgap_write_update_interval(bgp, data->sensor_id,
 					data->ti_thermal->polling_delay);
@@ -331,7 +361,13 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
-	thermal_zone_device_unregister(data->ti_thermal);
+	if (data && data->ti_thermal) {
+		if (data->our_zone)
+			thermal_zone_device_unregister(data->ti_thermal);
+		else
+			thermal_zone_of_sensor_unregister(bgp->dev,
+							  data->ti_thermal);
+	}
 
 	return 0;
 }
@@ -350,6 +386,15 @@ int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id)
 int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
 {
 	struct ti_thermal_data *data;
+	struct device_node *np = bgp->dev->of_node;
+
+	/*
+	 * We are assuming here that if one deploys the zone
+	 * using DT, then it must be aware that the cooling device
+	 * loading has to happen via cpufreq driver.
+	 */
+	if (of_find_property(np, "#thermal-sensor-cells", NULL))
+		return 0;
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 	if (!data || IS_ERR(data))
@@ -380,7 +425,9 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
 	struct ti_thermal_data *data;
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
-	cpufreq_cooling_unregister(data->cool_dev);
+
+	if (data && data->cool_dev)
+		cpufreq_cooling_unregister(data->cool_dev);
 
 	return 0;
 }
diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c
index 7722cb9d5a8..972e1c73722 100644
--- a/drivers/thermal/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/x86_pkg_temp_thermal.c
@@ -215,7 +215,7 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd,
 	return 0;
 }
 
-int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
+static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
 							unsigned long temp)
 {
 	u32 l, h;