Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

6 files changed, 439 insertions, 28 deletions

diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index e371753ba92..4222035acfb 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -34,6 +34,15 @@ config HVC_ISERIES
 	help
 	  iSeries machines support a hypervisor virtual console.
 
+config HVC_OPAL
+	bool "OPAL Console support"
+	depends on PPC_POWERNV
+	select HVC_DRIVER
+	select HVC_IRQ
+	default y
+	help
+	  PowerNV machines running under OPAL need that driver to get a console
+
 config HVC_RTAS
 	bool "IBM RTAS Console support"
 	depends on PPC_RTAS
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index e2920531637..89abf40bc73 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi_lib.o
+obj-$(CONFIG_HVC_OPAL)		+= hvc_opal.o hvsi_lib.o
 obj-$(CONFIG_HVC_OLD_HVSI)	+= hvsi.o
 obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
new file mode 100644
index 00000000000..7b38512d6c4
--- /dev/null
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -0,0 +1,424 @@
+/*
+ * opal driver interface to hvc_console.c
+ *
+ * Copyright 2011 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/console.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/hvconsole.h>
+#include <asm/prom.h>
+#include <asm/firmware.h>
+#include <asm/hvsi.h>
+#include <asm/udbg.h>
+#include <asm/opal.h>
+
+#include "hvc_console.h"
+
+static const char hvc_opal_name[] = "hvc_opal";
+
+static struct of_device_id hvc_opal_match[] __devinitdata = {
+	{ .name = "serial", .compatible = "ibm,opal-console-raw" },
+	{ .name = "serial", .compatible = "ibm,opal-console-hvsi" },
+	{ },
+};
+
+typedef enum hv_protocol {
+	HV_PROTOCOL_RAW,
+	HV_PROTOCOL_HVSI
+} hv_protocol_t;
+
+struct hvc_opal_priv {
+	hv_protocol_t		proto;	/* Raw data or HVSI packets */
+	struct hvsi_priv	hvsi;	/* HVSI specific data */
+};
+static struct hvc_opal_priv *hvc_opal_privs[MAX_NR_HVC_CONSOLES];
+
+/* For early boot console */
+static struct hvc_opal_priv hvc_opal_boot_priv;
+static u32 hvc_opal_boot_termno;
+
+static const struct hv_ops hvc_opal_raw_ops = {
+	.get_chars = opal_get_chars,
+	.put_chars = opal_put_chars,
+	.notifier_add = notifier_add_irq,
+	.notifier_del = notifier_del_irq,
+	.notifier_hangup = notifier_hangup_irq,
+};
+
+static int hvc_opal_hvsi_get_chars(uint32_t vtermno, char *buf, int count)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[vtermno];
+
+	if (WARN_ON(!pv))
+		return -ENODEV;
+
+	return hvsilib_get_chars(&pv->hvsi, buf, count);
+}
+
+static int hvc_opal_hvsi_put_chars(uint32_t vtermno, const char *buf, int count)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[vtermno];
+
+	if (WARN_ON(!pv))
+		return -ENODEV;
+
+	return hvsilib_put_chars(&pv->hvsi, buf, count);
+}
+
+static int hvc_opal_hvsi_open(struct hvc_struct *hp, int data)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+	int rc;
+
+	pr_devel("HVSI@%x: do open !\n", hp->vtermno);
+
+	rc = notifier_add_irq(hp, data);
+	if (rc)
+		return rc;
+
+	return hvsilib_open(&pv->hvsi, hp);
+}
+
+static void hvc_opal_hvsi_close(struct hvc_struct *hp, int data)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+	pr_devel("HVSI@%x: do close !\n", hp->vtermno);
+
+	hvsilib_close(&pv->hvsi, hp);
+
+	notifier_del_irq(hp, data);
+}
+
+void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+	pr_devel("HVSI@%x: do hangup !\n", hp->vtermno);
+
+	hvsilib_close(&pv->hvsi, hp);
+
+	notifier_hangup_irq(hp, data);
+}
+
+static int hvc_opal_hvsi_tiocmget(struct hvc_struct *hp)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+	if (!pv)
+		return -EINVAL;
+	return pv->hvsi.mctrl;
+}
+
+static int hvc_opal_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set,
+				unsigned int clear)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+	pr_devel("HVSI@%x: Set modem control, set=%x,clr=%x\n",
+		 hp->vtermno, set, clear);
+
+	if (set & TIOCM_DTR)
+		hvsilib_write_mctrl(&pv->hvsi, 1);
+	else if (clear & TIOCM_DTR)
+		hvsilib_write_mctrl(&pv->hvsi, 0);
+
+	return 0;
+}
+
+static const struct hv_ops hvc_opal_hvsi_ops = {
+	.get_chars = hvc_opal_hvsi_get_chars,
+	.put_chars = hvc_opal_hvsi_put_chars,
+	.notifier_add = hvc_opal_hvsi_open,
+	.notifier_del = hvc_opal_hvsi_close,
+	.notifier_hangup = hvc_opal_hvsi_hangup,
+	.tiocmget = hvc_opal_hvsi_tiocmget,
+	.tiocmset = hvc_opal_hvsi_tiocmset,
+};
+
+static int __devinit hvc_opal_probe(struct platform_device *dev)
+{
+	const struct hv_ops *ops;
+	struct hvc_struct *hp;
+	struct hvc_opal_priv *pv;
+	hv_protocol_t proto;
+	unsigned int termno, boot = 0;
+	const __be32 *reg;
+
+	if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-console-raw")) {
+		proto = HV_PROTOCOL_RAW;
+		ops = &hvc_opal_raw_ops;
+	} else if (of_device_is_compatible(dev->dev.of_node,
+					   "ibm,opal-console-hvsi")) {
+		proto = HV_PROTOCOL_HVSI;
+		ops = &hvc_opal_hvsi_ops;
+	} else {
+		pr_err("hvc_opal: Unkown protocol for %s\n",
+		       dev->dev.of_node->full_name);
+		return -ENXIO;
+	}
+
+	reg = of_get_property(dev->dev.of_node, "reg", NULL);
+	termno = reg ? be32_to_cpup(reg) : 0;
+
+	/* Is it our boot one ? */
+	if (hvc_opal_privs[termno] == &hvc_opal_boot_priv) {
+		pv = hvc_opal_privs[termno];
+		boot = 1;
+	} else if (hvc_opal_privs[termno] == NULL) {
+		pv = kzalloc(sizeof(struct hvc_opal_priv), GFP_KERNEL);
+		if (!pv)
+			return -ENOMEM;
+		pv->proto = proto;
+		hvc_opal_privs[termno] = pv;
+		if (proto == HV_PROTOCOL_HVSI)
+			hvsilib_init(&pv->hvsi, opal_get_chars, opal_put_chars,
+				     termno, 0);
+
+		/* Instanciate now to establish a mapping index==vtermno */
+		hvc_instantiate(termno, termno, ops);
+	} else {
+		pr_err("hvc_opal: Device %s has duplicate terminal number #%d\n",
+		       dev->dev.of_node->full_name, termno);
+		return -ENXIO;
+	}
+
+	pr_info("hvc%d: %s protocol on %s%s\n", termno,
+		proto == HV_PROTOCOL_RAW ? "raw" : "hvsi",
+		dev->dev.of_node->full_name,
+		boot ? " (boot console)" : "");
+
+	/* We don't do IRQ yet */
+	hp = hvc_alloc(termno, 0, ops, MAX_VIO_PUT_CHARS);
+	if (IS_ERR(hp))
+		return PTR_ERR(hp);
+	dev_set_drvdata(&dev->dev, hp);
+
+	return 0;
+}
+
+static int __devexit hvc_opal_remove(struct platform_device *dev)
+{
+	struct hvc_struct *hp = dev_get_drvdata(&dev->dev);
+	int rc, termno;
+
+	termno = hp->vtermno;
+	rc = hvc_remove(hp);
+	if (rc == 0) {
+		if (hvc_opal_privs[termno] != &hvc_opal_boot_priv)
+			kfree(hvc_opal_privs[termno]);
+		hvc_opal_privs[termno] = NULL;
+	}
+	return rc;
+}
+
+static struct platform_driver hvc_opal_driver = {
+	.probe		= hvc_opal_probe,
+	.remove		= __devexit_p(hvc_opal_remove),
+	.driver		= {
+		.name	= hvc_opal_name,
+		.owner	= THIS_MODULE,
+		.of_match_table	= hvc_opal_match,
+	}
+};
+
+static int __init hvc_opal_init(void)
+{
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return -ENODEV;
+
+	/* Register as a vio device to receive callbacks */
+	return platform_driver_register(&hvc_opal_driver);
+}
+module_init(hvc_opal_init);
+
+static void __exit hvc_opal_exit(void)
+{
+	platform_driver_unregister(&hvc_opal_driver);
+}
+module_exit(hvc_opal_exit);
+
+static void udbg_opal_putc(char c)
+{
+	unsigned int termno = hvc_opal_boot_termno;
+	int count = -1;
+
+	if (c == '\n')
+		udbg_opal_putc('\r');
+
+	do {
+		switch(hvc_opal_boot_priv.proto) {
+		case HV_PROTOCOL_RAW:
+			count = opal_put_chars(termno, &c, 1);
+			break;
+		case HV_PROTOCOL_HVSI:
+			count = hvc_opal_hvsi_put_chars(termno, &c, 1);
+			break;
+		}
+	} while(count == 0 || count == -EAGAIN);
+}
+
+static int udbg_opal_getc_poll(void)
+{
+	unsigned int termno = hvc_opal_boot_termno;
+	int rc = 0;
+	char c;
+
+	switch(hvc_opal_boot_priv.proto) {
+	case HV_PROTOCOL_RAW:
+		rc = opal_get_chars(termno, &c, 1);
+		break;
+	case HV_PROTOCOL_HVSI:
+		rc = hvc_opal_hvsi_get_chars(termno, &c, 1);
+		break;
+	}
+	if (!rc)
+		return -1;
+	return c;
+}
+
+static int udbg_opal_getc(void)
+{
+	int ch;
+	for (;;) {
+		ch = udbg_opal_getc_poll();
+		if (ch == -1) {
+			/* This shouldn't be needed...but... */
+			volatile unsigned long delay;
+			for (delay=0; delay < 2000000; delay++)
+				;
+		} else {
+			return ch;
+		}
+	}
+}
+
+static void udbg_init_opal_common(void)
+{
+	udbg_putc = udbg_opal_putc;
+	udbg_getc = udbg_opal_getc;
+	udbg_getc_poll = udbg_opal_getc_poll;
+	tb_ticks_per_usec = 0x200; /* Make udelay not suck */
+}
+
+void __init hvc_opal_init_early(void)
+{
+	struct device_node *stdout_node = NULL;
+	const u32 *termno;
+	const char *name = NULL;
+	const struct hv_ops *ops;
+	u32 index;
+
+	/* find the boot console from /chosen/stdout */
+	if (of_chosen)
+		name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name) {
+		stdout_node = of_find_node_by_path(name);
+		if (!stdout_node) {
+			pr_err("hvc_opal: Failed to locate default console!\n");
+			return;
+		}
+	} else {
+		struct device_node *opal, *np;
+
+		/* Current OPAL takeover doesn't provide the stdout
+		 * path, so we hard wire it
+		 */
+		opal = of_find_node_by_path("/ibm,opal/consoles");
+		if (opal)
+			pr_devel("hvc_opal: Found consoles in new location\n");
+		if (!opal) {
+			opal = of_find_node_by_path("/ibm,opal");
+			if (opal)
+				pr_devel("hvc_opal: "
+					 "Found consoles in old location\n");
+		}
+		if (!opal)
+			return;
+		for_each_child_of_node(opal, np) {
+			if (!strcmp(np->name, "serial")) {
+				stdout_node = np;
+				break;
+			}
+		}
+		of_node_put(opal);
+	}
+	if (!stdout_node)
+		return;
+	termno = of_get_property(stdout_node, "reg", NULL);
+	index = termno ? *termno : 0;
+	if (index >= MAX_NR_HVC_CONSOLES)
+		return;
+	hvc_opal_privs[index] = &hvc_opal_boot_priv;
+
+	/* Check the protocol */
+	if (of_device_is_compatible(stdout_node, "ibm,opal-console-raw")) {
+		hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW;
+		ops = &hvc_opal_raw_ops;
+		pr_devel("hvc_opal: Found RAW console\n");
+	}
+	else if (of_device_is_compatible(stdout_node,"ibm,opal-console-hvsi")) {
+		hvc_opal_boot_priv.proto = HV_PROTOCOL_HVSI;
+		ops = &hvc_opal_hvsi_ops;
+		hvsilib_init(&hvc_opal_boot_priv.hvsi, opal_get_chars,
+			     opal_put_chars, index, 1);
+		/* HVSI, perform the handshake now */
+		hvsilib_establish(&hvc_opal_boot_priv.hvsi);
+		pr_devel("hvc_opal: Found HVSI console\n");
+	} else
+		goto out;
+	hvc_opal_boot_termno = index;
+	udbg_init_opal_common();
+	add_preferred_console("hvc", index, NULL);
+	hvc_instantiate(index, index, ops);
+out:
+	of_node_put(stdout_node);
+}
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW
+void __init udbg_init_debug_opal(void)
+{
+	u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
+	hvc_opal_privs[index] = &hvc_opal_boot_priv;
+	hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW;
+	hvc_opal_boot_termno = index;
+	udbg_init_opal_common();
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_RAW */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI
+void __init udbg_init_debug_opal_hvsi(void)
+{
+	u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
+	hvc_opal_privs[index] = &hvc_opal_boot_priv;
+	hvc_opal_boot_termno = index;
+	udbg_init_opal_common();
+	hvsilib_init(&hvc_opal_boot_priv.hvsi, opal_get_chars, opal_put_chars,
+		     index, 1);
+	hvsilib_establish(&hvc_opal_boot_priv.hvsi);
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI */
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 55882b5930a..b9040bec36b 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1532,7 +1532,7 @@ static int __devinit hvcs_initialize(void)
 		goto register_fail;
 	}
 
-	hvcs_pi_buff = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	hvcs_pi_buff = (unsigned long *) __get_free_page(GFP_KERNEL);
 	if (!hvcs_pi_buff) {
 		rc = -ENOMEM;
 		goto buff_alloc_fail;
@@ -1548,7 +1548,7 @@ static int __devinit hvcs_initialize(void)
 	return 0;
 
 kthread_fail:
-	kfree(hvcs_pi_buff);
+	free_page((unsigned long)hvcs_pi_buff);
 buff_alloc_fail:
 	tty_unregister_driver(hvcs_tty_driver);
 register_fail:
@@ -1597,7 +1597,7 @@ static void __exit hvcs_module_exit(void)
 	kthread_stop(hvcs_task);
 
 	spin_lock(&hvcs_pi_lock);
-	kfree(hvcs_pi_buff);
+	free_page((unsigned long)hvcs_pi_buff);
 	hvcs_pi_buff = NULL;
 	spin_unlock(&hvcs_pi_lock);
 
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index bd9b09827b2..6f4dd83d869 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -183,7 +183,7 @@ int hvsilib_get_chars(struct hvsi_priv *pv, char *buf, int count)
 	unsigned int tries, read = 0;
 
 	if (WARN_ON(!pv))
-		return 0;
+		return -ENXIO;
 
 	/* If we aren't open, don't do anything in order to avoid races
 	 * with connection establishment. The hvc core will call this
@@ -234,7 +234,7 @@ int hvsilib_put_chars(struct hvsi_priv *pv, const char *buf, int count)
 	int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA);
 
 	if (WARN_ON(!pv))
-		return 0;
+		return -ENODEV;
 
 	dp.hdr.type = VS_DATA_PACKET_HEADER;
 	dp.hdr.len = adjcount + sizeof(struct hvsi_header);
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index a87a56cb541..eeadf1b8e09 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -450,24 +450,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
 	__raw_writel(value, p->membase + offset);
 }
 
-static unsigned int tsi_serial_in(struct uart_port *p, int offset)
-{
-	unsigned int tmp;
-	offset = map_8250_in_reg(p, offset) << p->regshift;
-	if (offset == UART_IIR) {
-		tmp = readl(p->membase + (UART_IIR & ~3));
-		return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
-	} else
-		return readb(p->membase + offset);
-}
-
-static void tsi_serial_out(struct uart_port *p, int offset, int value)
-{
-	offset = map_8250_out_reg(p, offset) << p->regshift;
-	if (!((offset == UART_IER) && (value & UART_IER_UUE)))
-		writeb(value, p->membase + offset);
-}
-
 static unsigned int io_serial_in(struct uart_port *p, int offset)
 {
 	offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -508,11 +490,6 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = au_serial_out;
 		break;
 
-	case UPIO_TSI:
-		p->serial_in = tsi_serial_in;
-		p->serial_out = tsi_serial_out;
-		break;
-
 	default:
 		p->serial_in = io_serial_in;
 		p->serial_out = io_serial_out;