aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:22:14 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:22:14 -0700
commit1bf25e78af317e6d5d9b5594dfeb0036e0d589d6 (patch)
tree49dbd2d7bd6856b8ae1864c2dd0c0eb5e36d5398 /drivers/tty
parent38f56f33ca381751f9b8910f67e7a805ec0b68cb (diff)
parent0592c2189ece16f3e0c5a56245634aba93d0c9dd (diff)
Merge tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/amba-pl011.c64
1 files changed, 38 insertions, 26 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b2e9e177a35..8ab70a62091 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -267,7 +267,7 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
}
}
-static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
+static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap)
{
/* DMA is the sole user of the platform data right now */
struct amba_pl011_data *plat = uap->port.dev->platform_data;
@@ -281,20 +281,25 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
struct dma_chan *chan;
dma_cap_mask_t mask;
- /* We need platform data */
- if (!plat || !plat->dma_filter) {
- dev_info(uap->port.dev, "no DMA platform data\n");
- return;
- }
+ chan = dma_request_slave_channel(dev, "tx");
- /* Try to acquire a generic DMA engine slave TX channel */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param);
if (!chan) {
- dev_err(uap->port.dev, "no TX DMA channel!\n");
- return;
+ /* We need platform data */
+ if (!plat || !plat->dma_filter) {
+ dev_info(uap->port.dev, "no DMA platform data\n");
+ return;
+ }
+
+ /* Try to acquire a generic DMA engine slave TX channel */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ chan = dma_request_channel(mask, plat->dma_filter,
+ plat->dma_tx_param);
+ if (!chan) {
+ dev_err(uap->port.dev, "no TX DMA channel!\n");
+ return;
+ }
}
dmaengine_slave_config(chan, &tx_conf);
@@ -304,7 +309,18 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
dma_chan_name(uap->dmatx.chan));
/* Optionally make use of an RX channel as well */
- if (plat->dma_rx_param) {
+ chan = dma_request_slave_channel(dev, "rx");
+
+ if (!chan && plat->dma_rx_param) {
+ chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
+
+ if (!chan) {
+ dev_err(uap->port.dev, "no RX DMA channel!\n");
+ return;
+ }
+ }
+
+ if (chan) {
struct dma_slave_config rx_conf = {
.src_addr = uap->port.mapbase + UART01x_DR,
.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -313,12 +329,6 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
.device_fc = false,
};
- chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
- if (!chan) {
- dev_err(uap->port.dev, "no RX DMA channel!\n");
- return;
- }
-
dmaengine_slave_config(chan, &rx_conf);
uap->dmarx.chan = chan;
@@ -360,6 +370,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
struct dma_uap {
struct list_head node;
struct uart_amba_port *uap;
+ struct device *dev;
};
static LIST_HEAD(pl011_dma_uarts);
@@ -370,7 +381,7 @@ static int __init pl011_dma_initcall(void)
list_for_each_safe(node, tmp, &pl011_dma_uarts) {
struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
- pl011_dma_probe_initcall(dmau->uap);
+ pl011_dma_probe_initcall(dmau->dev, dmau->uap);
list_del(node);
kfree(dmau);
}
@@ -379,18 +390,19 @@ static int __init pl011_dma_initcall(void)
device_initcall(pl011_dma_initcall);
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
{
struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
if (dmau) {
dmau->uap = uap;
+ dmau->dev = dev;
list_add_tail(&dmau->node, &pl011_dma_uarts);
}
}
#else
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
{
- pl011_dma_probe_initcall(uap);
+ pl011_dma_probe_initcall(dev, uap);
}
#endif
@@ -1096,7 +1108,7 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
#else
/* Blank functions if the DMA engine is not available */
-static inline void pl011_dma_probe(struct uart_amba_port *uap)
+static inline void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
{
}
@@ -2155,7 +2167,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = i;
- pl011_dma_probe(uap);
+ pl011_dma_probe(&dev->dev, uap);
/* Ensure interrupts from this UART are masked and cleared */
writew(0, uap->port.membase + UART011_IMSC);