usb: dwc3: fetch mode of operation from HW

There's no need to add driver_data for something
we can fetch from HW.

This also makes our id_table unnecessary - at least
for now -, so we also remove it on the same patch.

Signed-off-by: Felipe Balbi <balbi@ti.com>

4 files changed, 46 insertions, 28 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 1f67606fd4f..df151992e49 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -325,15 +325,17 @@ static void dwc3_core_exit(struct dwc3 *dwc)
 
 static int __devinit dwc3_probe(struct platform_device *pdev)
 {
-	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct resource		*res;
 	struct dwc3		*dwc;
-	void __iomem		*regs;
-	unsigned int		features = id->driver_data;
+
 	int			ret = -ENOMEM;
 	int			irq;
+
+	void __iomem		*regs;
 	void			*mem;
 
+	u8			mode;
+
 	mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
 	if (!mem) {
 		dev_err(&pdev->dev, "not enough memory\n");
@@ -396,13 +398,22 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
-	if (features & DWC3_HAS_PERIPHERAL) {
+	mode = DWC3_MODE(dwc->hwparams.hwparams0);
+
+	switch (mode) {
+	case DWC3_MODE_DRD:
+	case DWC3_MODE_DEVICE:
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
-			dev_err(&pdev->dev, "failed to initialized gadget\n");
+			dev_err(&pdev->dev, "failed to initialize gadget\n");
 			goto err4;
 		}
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported mode of operation %d\n", mode);
+		goto err4;
 	}
+	dwc->mode = mode;
 
 	ret = dwc3_debugfs_init(dwc);
 	if (ret) {
@@ -415,8 +426,15 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 	return 0;
 
 err5:
-	if (features & DWC3_HAS_PERIPHERAL)
+	switch (mode) {
+	case DWC3_MODE_DRD:
+	case DWC3_MODE_DEVICE:
 		dwc3_gadget_exit(dwc);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
 
 err4:
 	dwc3_core_exit(dwc);
@@ -436,10 +454,8 @@ err0:
 
 static int __devexit dwc3_remove(struct platform_device *pdev)
 {
-	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct dwc3	*dwc = platform_get_drvdata(pdev);
 	struct resource	*res;
-	unsigned int	features = id->driver_data;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
@@ -448,8 +464,15 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
 
 	dwc3_debugfs_exit(dwc);
 
-	if (features & DWC3_HAS_PERIPHERAL)
+	switch (dwc->mode) {
+	case DWC3_MODE_DRD:
+	case DWC3_MODE_DEVICE:
 		dwc3_gadget_exit(dwc);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
 
 	dwc3_core_exit(dwc);
 	release_mem_region(res->start, resource_size(res));
@@ -459,28 +482,12 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct platform_device_id dwc3_id_table[] __devinitconst = {
-	{
-		.name	= "dwc3-omap",
-		.driver_data = (DWC3_HAS_PERIPHERAL
-			| DWC3_HAS_XHCI
-			| DWC3_HAS_OTG),
-	},
-	{
-		.name	= "dwc3-pci",
-		.driver_data = DWC3_HAS_PERIPHERAL,
-	},
-	{  },	/* Terminating Entry */
-};
-MODULE_DEVICE_TABLE(platform, dwc3_id_table);
-
 static struct platform_driver dwc3_driver = {
 	.probe		= dwc3_probe,
 	.remove		= __devexit_p(dwc3_remove),
 	.driver		= {
 		.name	= "dwc3",
 	},
-	.id_table	= dwc3_id_table,
 };
 
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 4b6c673ed60..a3ef8f34bf7 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -536,6 +536,15 @@ struct dwc3_hwparams {
 	u32	hwparams8;
 };
 
+/* HWPARAMS0 */
+#define DWC3_MODE(n)		((n) & 0x7)
+
+#define DWC3_MODE_DEVICE	0
+#define DWC3_MODE_HOST		1
+#define DWC3_MODE_DRD		2
+#define DWC3_MODE_HUB		3
+
+/* HWPARAMS1 */
 #define DWC3_NUM_INT(n)	(((n) & (0x3f << 15)) >> 15)
 
 /**
@@ -560,6 +569,7 @@ struct dwc3_hwparams {
  * @num_event_buffers: calculated number of event buffers
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
  * @revision: revision register contents
+ * @mode: mode of operation
  * @is_selfpowered: true when we are selfpowered
  * @three_stage_setup: set if we perform a three phase setup
  * @ep0_status_pending: ep0 status response without a req is pending
@@ -602,6 +612,7 @@ struct dwc3 {
 	u32			num_event_buffers;
 	u32			maximum_speed;
 	u32			revision;
+	u32			mode;
 
 #define DWC3_REVISION_173A	0x5533173a
 #define DWC3_REVISION_175A	0x5533175a
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 062552b5fc8..7bcf6775a1a 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -236,7 +236,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	dwc3 = platform_device_alloc("dwc3-omap", -1);
+	dwc3 = platform_device_alloc("dwc3", -1);
 	if (!dwc3) {
 		dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
 		goto err2;
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index f77c0004268..193f1bd90d5 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -118,7 +118,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
 	if (devid < 0)
 		goto err2;
 
-	dwc3 = platform_device_alloc("dwc3-pci", devid);
+	dwc3 = platform_device_alloc("dwc3", devid);
 	if (!dwc3) {
 		dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
 		goto err3;
@@ -196,7 +196,7 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
 MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
 
 static struct pci_driver dwc3_pci_driver = {
-	.name		= "pci-dwc3",
+	.name		= "dwc3-pci",
 	.id_table	= dwc3_pci_id_table,
 	.probe		= dwc3_pci_probe,
 	.remove		= __devexit_p(dwc3_pci_remove),