aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/ohci-hub.c
diff options
context:
space:
mode:
authorAlan Stern <stern@rowland.harvard.edu>2008-09-03 16:38:32 -0400
committerGreg Kroah-Hartman <gregkh@suse.de>2008-10-17 14:40:54 -0700
commit4a511bc3f5829bc18428bcf11c25417a79d09396 (patch)
treed2512a4e4cdf680f297e0af8be6566f9f95fdfb7 /drivers/usb/host/ohci-hub.c
parent8bfa24727087d7252f9ecfb5fea2dfc92d797fbd (diff)
OHCI: Allow broken controllers to auto-stop
This patch (as1134) attempts to improve the way we handle OHCI controllers with broken Root Hub Status Change interrupt support. In these controllers the RHSC interrupt bit essentially never turns off, making RHSC interrupts useless -- they have to remain permanently disabled. Such controllers should still be allowed to turn off their root hubs when no devices are attached. Polling for new connections can continue while the root hub is suspended. The patch implements this feature. (It won't have much effect unless CONFIG_PM is enabled and CONFIG_USB_SUSPEND is disabled, but since the overhead is very small we may as well do it.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/host/ohci-hub.c')
-rw-r--r--drivers/usb/host/ohci-hub.c60
1 files changed, 32 insertions, 28 deletions
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 7ea9a7b3115..a150e85c901 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -362,18 +362,23 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
int poll_rh = 1;
- int rhsc;
+ int rhsc_status, rhsc_enable;
- rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
- switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+ /* Some broken controllers never turn off RHCS in the interrupt
+ * status register. For their sake we won't re-enable RHSC
+ * interrupts if the interrupt bit is already active.
+ */
+ rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
+ OHCI_INTR_RHSC;
+ rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) &
+ OHCI_INTR_RHSC;
+ switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- /* If no status changes are pending, enable status-change
- * interrupts.
- */
- if (!rhsc && !changed) {
- rhsc = OHCI_INTR_RHSC;
- ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
+ /* If no status changes are pending, enable RHSC interrupts. */
+ if (!rhsc_enable && !rhsc_status && !changed) {
+ rhsc_enable = OHCI_INTR_RHSC;
+ ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable);
}
/* Keep on polling until we know a device is connected
@@ -383,7 +388,7 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
if (any_connected ||
!device_may_wakeup(&ohci_to_hcd(ohci)
->self.root_hub->dev)) {
- if (rhsc)
+ if (rhsc_enable)
poll_rh = 0;
} else {
ohci->autostop = 1;
@@ -396,34 +401,36 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
ohci->autostop = 0;
ohci->next_statechange = jiffies +
STATECHANGE_DELAY;
- } else if (rhsc && time_after_eq(jiffies,
+ } else if (time_after_eq(jiffies,
ohci->next_statechange)
&& !ohci->ed_rm_list
&& !(ohci->hc_control &
OHCI_SCHED_ENABLES)) {
ohci_rh_suspend(ohci, 1);
- poll_rh = 0;
+ if (rhsc_enable)
+ poll_rh = 0;
}
}
break;
- /* if there is a port change, autostart or ask to be resumed */
case OHCI_USB_SUSPEND:
case OHCI_USB_RESUME:
+ /* if there is a port change, autostart or ask to be resumed */
if (changed) {
if (ohci->autostop)
ohci_rh_resume(ohci);
else
usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
} else {
- if (!rhsc && (ohci->autostop ||
+ if (!rhsc_enable && !rhsc_status && (ohci->autostop ||
ohci_to_hcd(ohci)->self.root_hub->
- do_remote_wakeup))
- ohci_writel(ohci, OHCI_INTR_RHSC,
+ do_remote_wakeup)) {
+ rhsc_enable = OHCI_INTR_RHSC;
+ ohci_writel(ohci, rhsc_enable,
&ohci->regs->intrenable);
-
- /* everything is idle, no need for polling */
- poll_rh = 0;
+ }
+ if (rhsc_enable)
+ poll_rh = 0;
}
break;
}
@@ -443,12 +450,16 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci)
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
+ int rhsc_status;
+
/* If RHSC is enabled, don't poll */
if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
return 0;
- /* If no status changes are pending, enable status-change interrupts */
- if (!changed) {
+ /* If no status changes are pending, enable RHSC interrupts */
+ rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
+ OHCI_INTR_RHSC;
+ if (!changed && !rhsc_status) {
ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
return 0;
}
@@ -492,13 +503,6 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
length++;
}
- /* Some broken controllers never turn off RHCS in the interrupt
- * status register. For their sake we won't re-enable RHSC
- * interrupts if the flag is already set.
- */
- if (ohci_readl(ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC)
- changed = 1;
-
/* look at each port */
for (i = 0; i < ohci->num_ports; i++) {
u32 status = roothub_portstatus (ohci, i);