diff options
| author | Thomas Petazzoni <thomas.petazzoni@free-electrons.com> | 2011-07-13 11:29:16 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2011-09-10 23:03:13 +0200 |
| commit | e7da859e424ccc30d2ef87dbabf655ad3d59f291 (patch) | |
| tree | e59f994cbaa45322bef762014190160b28f23e77 /drivers/usb/host | |
| parent | 0af4316babb64c6703c113a89462ff7843767f24 (diff) | |
at91: ohci-at91: add vbus_pin_inverted platform attribute
The existing OHCI AT91 driver made the assumption that the enable
input of the USB power switch was active low. However, some USB power
switches such as the Micrel MIC2026-1 [1] have an active high input to
enable the power. A new vbus_pin_inverted attribute is added to the
at91_usbh_data structure so that board files can tell the OHCI driver
if the vbus pin logic is active low or active high.
[1] http://www.micrel.com/page.do?page=product-info/products/mic2026.shtml
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/ohci-at91.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index e08cb10d1ac..5dd381fc2dd 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -279,7 +279,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (pdata->vbus_pin[i] <= 0) continue; gpio_request(pdata->vbus_pin[i], "ohci_vbus"); - gpio_direction_output(pdata->vbus_pin[i], 0); + gpio_direction_output(pdata->vbus_pin[i], pdata->vbus_pin_inverted); } } @@ -296,7 +296,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (pdata->vbus_pin[i] <= 0) continue; - gpio_direction_output(pdata->vbus_pin[i], 1); + gpio_direction_output(pdata->vbus_pin[i], !pdata->vbus_pin_inverted); gpio_free(pdata->vbus_pin[i]); } } |