Merge tag 'usb-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg KH:
 "Here's the big USB driver pull request for 3.12-rc1

  Lots of USB driver fixes and updates.  Nothing major, just the normal
  xhci, gadget, and other driver changes.  Full details in the shortlog"

* tag 'usb-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (352 commits)
  usbcore: fix incorrect type in assignment in descriptors_changed()
  usbcore: compare and release one bos descriptor in usb_reset_and_verify_device()
  ehci: remove debugging statement with ehci statistics in ehci_stop()
  ehci: remove duplicate debug_async_open() prototype in ehci-dbg.c
  ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set
  ehci: remove ehci_vdbg() verbose debugging statements
  Documentation sysfs-bus-usb: Document which files are used by libusb
  Documentation sysfs-bus-usb: Document the speed file used by libusb
  Documentation sysfs-bus-usb: Move files with known users to stable
  USB: fix build error when CONFIG_PM_SLEEP isn't enabled
  usb: r8a66597-hcd: use platform_{get,set}_drvdata()
  usb: phy-tegra-usb: use platform_{get,set}_drvdata()
  usb: acm gadget: Null termintate strings table
  dma: cppi41: off by one in desc_to_chan()
  xhci: Fix warning introduced by disabling runtime PM.
  dev-core: fix build break when DEBUG is enabled
  USB: OHCI: Allow runtime PM without system sleep
  usb: ohci-at91: remove unnecessary dev_set_drvdata()
  usb: renesas_usbhs: use platform_{get,set}_drvdata()
  usb: fotg210-udc: use platform_{get,set}_drvdata()
  ...

24 files changed, 811 insertions, 332 deletions

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 3622fff8b79..d5589f9c60a 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -1,22 +1,10 @@
 #
 # Physical Layer USB driver configuration
 #
-menuconfig USB_PHY
-	bool "USB Physical Layer drivers"
-	help
-	  Most USB controllers have the physical layer signalling part
-	  (commonly called a PHY) built in.  However, dual-role devices
-	  (a.k.a. USB on-the-go) which support being USB master or slave
-	  with the same connector often use an external PHY.
-
-	  The drivers in this submenu add support for such PHY devices.
-	  They are not needed for standard master-only (or the vast
-	  majority of slave-only) USB interfaces.
+menu "USB Physical Layer drivers"
 
-	  If you're not sure if this applies to you, it probably doesn't;
-	  say N here.
-
-if USB_PHY
+config USB_PHY
+	def_bool n
 
 #
 # USB Transceiver Drivers
@@ -24,6 +12,7 @@ if USB_PHY
 config AB8500_USB
 	tristate "AB8500 USB Transceiver Driver"
 	depends on AB8500_CORE
+	select USB_PHY
 	help
 	  Enable this to support the USB OTG transceiver in AB8500 chip.
 	  This transceiver supports high and full speed devices plus,
@@ -33,12 +22,14 @@ config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
 	depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
 	select USB_OTG
+	select USB_PHY
 	help
 	  Enable this to support Freescale USB OTG transceiver.
 
 config ISP1301_OMAP
 	tristate "Philips ISP1301 with OMAP OTG"
 	depends on I2C && ARCH_OMAP_OTG
+	select USB_PHY
 	help
 	  If you say yes here you get support for the Philips ISP1301
 	  USB-On-The-Go transceiver working with the OMAP OTG controller.
@@ -52,12 +43,14 @@ config ISP1301_OMAP
 config MV_U3D_PHY
 	bool "Marvell USB 3.0 PHY controller Driver"
 	depends on CPU_MMP3
+	select USB_PHY
 	help
 	  Enable this to support Marvell USB 3.0 phy controller for Marvell
 	  SoC.
 
 config NOP_USB_XCEIV
 	tristate "NOP USB Transceiver Driver"
+	select USB_PHY
 	help
 	  This driver is to be used by all the usb transceiver which are either
 	  built-in with usb ip or which are autonomous and doesn't require any
@@ -65,6 +58,7 @@ config NOP_USB_XCEIV
 
 config OMAP_CONTROL_USB
 	tristate "OMAP CONTROL USB Driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	help
 	  Enable this to add support for the USB part present in the control
 	  module. This driver has API to power on the USB2 PHY and to write to
@@ -76,6 +70,7 @@ config OMAP_USB2
 	tristate "OMAP USB2 PHY Driver"
 	depends on ARCH_OMAP2PLUS
 	select OMAP_CONTROL_USB
+	select USB_PHY
 	help
 	  Enable this to support the transceiver that is part of SOC. This
 	  driver takes care of all the PHY functionality apart from comparator.
@@ -84,13 +79,27 @@ config OMAP_USB2
 
 config OMAP_USB3
 	tristate "OMAP USB3 PHY Driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	select OMAP_CONTROL_USB
+	select USB_PHY
 	help
 	  Enable this to support the USB3 PHY that is part of SOC. This
 	  driver takes care of all the PHY functionality apart from comparator.
 	  This driver interacts with the "OMAP Control USB Driver" to power
 	  on/off the PHY.
 
+config AM335X_CONTROL_USB
+	tristate
+
+config AM335X_PHY_USB
+	tristate "AM335x USB PHY Driver"
+	select USB_PHY
+	select AM335X_CONTROL_USB
+	select NOP_USB_XCEIV
+	help
+	  This driver provides PHY support for that phy which part for the
+	  AM335x SoC.
+
 config SAMSUNG_USBPHY
 	tristate
 	help
@@ -101,6 +110,7 @@ config SAMSUNG_USBPHY
 config SAMSUNG_USB2PHY
 	tristate "Samsung USB 2.0 PHY controller Driver"
 	select SAMSUNG_USBPHY
+	select USB_PHY
 	help
 	  Enable this to support Samsung USB 2.0 (High Speed) PHY controller
 	  driver for Samsung SoCs.
@@ -108,6 +118,7 @@ config SAMSUNG_USB2PHY
 config SAMSUNG_USB3PHY
 	tristate "Samsung USB 3.0 PHY controller Driver"
 	select SAMSUNG_USBPHY
+	select USB_PHY
 	help
 	  Enable this to support Samsung USB 3.0 (Super Speed) phy controller
 	  for samsung SoCs.
@@ -115,6 +126,7 @@ config SAMSUNG_USB3PHY
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
 	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+	select USB_PHY
 	help
 	  Enable this to support the USB OTG transceiver on TWL4030
 	  family chips (including the TWL5030 and TPS659x0 devices).
@@ -135,6 +147,7 @@ config TWL6030_USB
 config USB_GPIO_VBUS
 	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
 	depends on GPIOLIB
+	select USB_PHY
 	help
 	  Provides simple GPIO VBUS sensing for controllers with an
 	  internal transceiver via the usb_phy interface, and
@@ -145,6 +158,7 @@ config USB_ISP1301
 	tristate "NXP ISP1301 USB transceiver support"
 	depends on USB || USB_GADGET
 	depends on I2C
+	select USB_PHY
 	help
 	  Say Y here to add support for the NXP ISP1301 USB transceiver driver.
 	  This chip is typically used as USB transceiver for USB host, gadget
@@ -156,6 +170,7 @@ config USB_ISP1301
 config USB_MSM_OTG
 	tristate "OTG support for Qualcomm on-chip USB controller"
 	depends on (USB || USB_GADGET) && ARCH_MSM
+	select USB_PHY
 	help
 	  Enable this to support the USB OTG transceiver on MSM chips. It
 	  handles PHY initialization, clock management, and workarounds
@@ -169,6 +184,7 @@ config USB_MV_OTG
 	tristate "Marvell USB OTG support"
 	depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
 	select USB_OTG
+	select USB_PHY
 	help
 	  Say Y here if you want to build Marvell USB OTG transciever
 	  driver in kernel (including PXA and MMP series). This driver
@@ -180,6 +196,7 @@ config USB_MXS_PHY
 	tristate "Freescale MXS USB PHY support"
 	depends on ARCH_MXC || ARCH_MXS
 	select STMP_DEVICE
+	select USB_PHY
 	help
 	  Enable this to support the Freescale MXS USB PHY.
 
@@ -188,6 +205,7 @@ config USB_MXS_PHY
 config USB_RCAR_PHY
 	tristate "Renesas R-Car USB PHY support"
 	depends on USB || USB_GADGET
+	select USB_PHY
 	help
 	  Say Y here to add support for the Renesas R-Car USB common PHY driver.
 	  This chip is typically used as USB PHY for USB host, gadget.
@@ -210,4 +228,4 @@ config USB_ULPI_VIEWPORT
 	  Provides read/write operations to the ULPI phy register set for
 	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
 
-endif # USB_PHY
+endmenu
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 070eca3af18..2135e85f46e 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -1,9 +1,6 @@
 #
 # Makefile for physical layer USB drivers
 #
-
-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
-
 obj-$(CONFIG_USB_PHY)			+= phy.o
 obj-$(CONFIG_OF)			+= of.o
 
@@ -14,8 +11,10 @@ phy-fsl-usb2-objs			:= phy-fsl-usb.o phy-fsm-usb.o
 obj-$(CONFIG_FSL_USB2_OTG)		+= phy-fsl-usb2.o
 obj-$(CONFIG_ISP1301_OMAP)		+= phy-isp1301-omap.o
 obj-$(CONFIG_MV_U3D_PHY)		+= phy-mv-u3d-usb.o
-obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-nop.o
+obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-generic.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= phy-omap-control.o
+obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
+obj-$(CONFIG_AM335X_PHY_USB)		+= phy-am335x.o
 obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= phy-omap-usb3.o
 obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
diff --git a/drivers/usb/phy/am35x-phy-control.h b/drivers/usb/phy/am35x-phy-control.h
new file mode 100644
index 00000000000..b96594d1962
--- /dev/null
+++ b/drivers/usb/phy/am35x-phy-control.h
@@ -0,0 +1,21 @@
+#ifndef _AM335x_PHY_CONTROL_H_
+#define _AM335x_PHY_CONTROL_H_
+
+struct phy_control {
+	void (*phy_power)(struct phy_control *phy_ctrl, u32 id, bool on);
+	void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on);
+};
+
+static inline void phy_ctrl_power(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+	phy_ctrl->phy_power(phy_ctrl, id, on);
+}
+
+static inline void phy_ctrl_wkup(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+	phy_ctrl->phy_wkup(phy_ctrl, id, on);
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev);
+
+#endif
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
new file mode 100644
index 00000000000..22cf07d62e4
--- /dev/null
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -0,0 +1,137 @@
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+struct phy_control {
+	void (*phy_power)(struct phy_control *phy_ctrl, u32 id, bool on);
+	void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on);
+};
+
+struct am335x_control_usb {
+	struct device *dev;
+	void __iomem *phy_reg;
+	void __iomem *wkup;
+	spinlock_t lock;
+	struct phy_control phy_ctrl;
+};
+
+#define AM335X_USB0_CTRL		0x0
+#define AM335X_USB1_CTRL		0x8
+#define AM335x_USB_WKUP			0x0
+
+#define USBPHY_CM_PWRDN		(1 << 0)
+#define USBPHY_OTG_PWRDN	(1 << 1)
+#define USBPHY_OTGVDET_EN	(1 << 19)
+#define USBPHY_OTGSESSEND_EN	(1 << 20)
+
+static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+	struct am335x_control_usb *usb_ctrl;
+	u32 val;
+	u32 reg;
+
+	usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl);
+
+	switch (id) {
+	case 0:
+		reg = AM335X_USB0_CTRL;
+		break;
+	case 1:
+		reg = AM335X_USB1_CTRL;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	val = readl(usb_ctrl->phy_reg + reg);
+	if (on) {
+		val &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
+		val |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+	} else {
+		val |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
+	}
+
+	writel(val, usb_ctrl->phy_reg + reg);
+}
+
+static const struct phy_control ctrl_am335x = {
+	.phy_power = am335x_phy_power,
+};
+
+static const struct of_device_id omap_control_usb_id_table[] = {
+	{ .compatible = "ti,am335x-usb-ctrl-module", .data = &ctrl_am335x },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+
+static struct platform_driver am335x_control_driver;
+static int match(struct device *dev, void *data)
+{
+	struct device_node *node = (struct device_node *)data;
+	return dev->of_node == node &&
+		dev->driver == &am335x_control_driver.driver;
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev)
+{
+	struct device_node *node;
+	struct am335x_control_usb *ctrl_usb;
+
+	node = of_parse_phandle(dev->of_node, "ti,ctrl_mod", 0);
+	if (!node)
+		return NULL;
+
+	dev = bus_find_device(&platform_bus_type, NULL, node, match);
+	ctrl_usb = dev_get_drvdata(dev);
+	if (!ctrl_usb)
+		return NULL;
+	return &ctrl_usb->phy_ctrl;
+}
+EXPORT_SYMBOL_GPL(am335x_get_phy_control);
+
+static int am335x_control_usb_probe(struct platform_device *pdev)
+{
+	struct resource	*res;
+	struct am335x_control_usb *ctrl_usb;
+	const struct of_device_id *of_id;
+	const struct phy_control *phy_ctrl;
+
+	of_id = of_match_node(omap_control_usb_id_table, pdev->dev.of_node);
+	if (!of_id)
+		return -EINVAL;
+
+	phy_ctrl = of_id->data;
+
+	ctrl_usb = devm_kzalloc(&pdev->dev, sizeof(*ctrl_usb), GFP_KERNEL);
+	if (!ctrl_usb) {
+		dev_err(&pdev->dev, "unable to alloc memory for control usb\n");
+		return -ENOMEM;
+	}
+
+	ctrl_usb->dev = &pdev->dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
+	ctrl_usb->phy_reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ctrl_usb->phy_reg))
+		return PTR_ERR(ctrl_usb->phy_reg);
+	spin_lock_init(&ctrl_usb->lock);
+	ctrl_usb->phy_ctrl = *phy_ctrl;
+
+	dev_set_drvdata(ctrl_usb->dev, ctrl_usb);
+	return 0;
+}
+
+static struct platform_driver am335x_control_driver = {
+	.probe		= am335x_control_usb_probe,
+	.driver		= {
+		.name	= "am335x-control-usb",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(omap_control_usb_id_table),
+	},
+};
+
+module_platform_driver(am335x_control_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
new file mode 100644
index 00000000000..c4d614d1f17
--- /dev/null
+++ b/drivers/usb/phy/phy-am335x.c
@@ -0,0 +1,99 @@
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "am35x-phy-control.h"
+#include "phy-generic.h"
+
+struct am335x_phy {
+	struct usb_phy_gen_xceiv usb_phy_gen;
+	struct phy_control *phy_ctrl;
+	int id;
+};
+
+static int am335x_init(struct usb_phy *phy)
+{
+	struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
+
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+	return 0;
+}
+
+static void am335x_shutdown(struct usb_phy *phy)
+{
+	struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
+
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+}
+
+static int am335x_phy_probe(struct platform_device *pdev)
+{
+	struct am335x_phy *am_phy;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	am_phy = devm_kzalloc(dev, sizeof(*am_phy), GFP_KERNEL);
+	if (!am_phy)
+		return -ENOMEM;
+
+	am_phy->phy_ctrl = am335x_get_phy_control(dev);
+	if (!am_phy->phy_ctrl)
+		return -EPROBE_DEFER;
+	am_phy->id = of_alias_get_id(pdev->dev.of_node, "phy");
+	if (am_phy->id < 0) {
+		dev_err(&pdev->dev, "Missing PHY id: %d\n", am_phy->id);
+		return am_phy->id;
+	}
+
+	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
+			USB_PHY_TYPE_USB2, 0, false, false);
+	if (ret)
+		return ret;
+
+	ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
+	if (ret)
+		goto err_add;
+	am_phy->usb_phy_gen.phy.init = am335x_init;
+	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
+
+	platform_set_drvdata(pdev, am_phy);
+	return 0;
+
+err_add:
+	usb_phy_gen_cleanup_phy(&am_phy->usb_phy_gen);
+	return ret;
+}
+
+static int am335x_phy_remove(struct platform_device *pdev)
+{
+	struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&am_phy->usb_phy_gen.phy);
+	return 0;
+}
+
+static const struct of_device_id am335x_phy_ids[] = {
+	{ .compatible = "ti,am335x-usb-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, am335x_phy_ids);
+
+static struct platform_driver am335x_phy_driver = {
+	.probe          = am335x_phy_probe,
+	.remove         = am335x_phy_remove,
+	.driver         = {
+		.name   = "am335x-phy-driver",
+		.owner  = THIS_MODULE,
+		.of_match_table = of_match_ptr(am335x_phy_ids),
+	},
+};
+
+module_platform_driver(am335x_phy_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index e771bafb9f1..fa7c9f9628b 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -611,7 +611,7 @@ static int fsl_otg_set_peripheral(struct usb_otg *otg,
 	otg_dev->fsm.b_bus_req = 1;
 
 	/* start the gadget right away if the ID pin says Mini-B */
-	DBG("ID pin=%d\n", otg_dev->fsm.id);
+	pr_debug("ID pin=%d\n", otg_dev->fsm.id);
 	if (otg_dev->fsm.id == 1) {
 		fsl_otg_start_host(&otg_dev->fsm, 0);
 		otg_drv_vbus(&otg_dev->fsm, 0);
@@ -684,7 +684,7 @@ static int fsl_otg_start_hnp(struct usb_otg *otg)
 	if (otg_dev != fsl_otg_dev)
 		return -ENODEV;
 
-	DBG("start_hnp...n");
+	pr_debug("start_hnp...\n");
 
 	/* clear a_bus_req to enter a_suspend state */
 	otg_dev->fsm.a_bus_req = 0;
@@ -834,7 +834,7 @@ int usb_otg_start(struct platform_device *pdev)
 	int status;
 	struct resource *res;
 	u32 temp;
-	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 
 	p_otg = container_of(otg_trans, struct fsl_otg, phy);
 	fsm = &p_otg->fsm;
@@ -941,7 +941,7 @@ int usb_otg_start(struct platform_device *pdev)
 		p_otg->fsm.id = 0;
 	}
 
-	DBG("initial ID pin=%d\n", p_otg->fsm.id);
+	pr_debug("initial ID pin=%d\n", p_otg->fsm.id);
 
 	/* enable OTG ID pin interrupt */
 	temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
@@ -1105,7 +1105,7 @@ static int fsl_otg_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	if (!pdev->dev.platform_data)
+	if (!dev_get_platdata(&pdev->dev))
 		return -ENODEV;
 
 	/* configure the OTG */
@@ -1137,7 +1137,7 @@ static int fsl_otg_probe(struct platform_device *pdev)
 
 static int fsl_otg_remove(struct platform_device *pdev)
 {
-	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 
 	usb_remove_phy(&fsl_otg_dev->phy);
 	free_irq(fsl_otg_dev->irq, fsl_otg_dev);
diff --git a/drivers/usb/phy/phy-fsm-usb.h b/drivers/usb/phy/phy-fsm-usb.h
index c30a2e1d9e4..fbe586206f3 100644
--- a/drivers/usb/phy/phy-fsm-usb.h
+++ b/drivers/usb/phy/phy-fsm-usb.h
@@ -15,18 +15,11 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#undef DEBUG
 #undef VERBOSE
 
-#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_DEBUG "[%s]  " fmt , \
-				 __func__, ## args)
-#else
-#define DBG(fmt, args...)	do {} while (0)
-#endif
-
 #ifdef VERBOSE
-#define VDBG		DBG
+#define VDBG(fmt, args...) pr_debug("[%s]  " fmt , \
+				 __func__, ## args)
 #else
 #define VDBG(stuff...)	do {} while (0)
 #endif
diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-generic.c
index 55445e5d72e..efe59f3f7fd 100644
--- a/drivers/usb/phy/phy-nop.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -30,19 +30,13 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/otg.h>
-#include <linux/usb/nop-usb-xceiv.h>
+#include <linux/usb/usb_phy_gen_xceiv.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
 
-struct nop_usb_xceiv {
-	struct usb_phy phy;
-	struct device *dev;
-	struct clk *clk;
-	struct regulator *vcc;
-	struct regulator *reset;
-};
+#include "phy-generic.h"
 
 static struct platform_device *pd;
 
@@ -50,9 +44,9 @@ void usb_nop_xceiv_register(void)
 {
 	if (pd)
 		return;
-	pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0);
+	pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0);
 	if (!pd) {
-		printk(KERN_ERR "Unable to register usb nop transceiver\n");
+		pr_err("Unable to register generic usb transceiver\n");
 		return;
 	}
 }
@@ -70,9 +64,9 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
-static int nop_init(struct usb_phy *phy)
+int usb_gen_phy_init(struct usb_phy *phy)
 {
-	struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev);
+	struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
 
 	if (!IS_ERR(nop->vcc)) {
 		if (regulator_enable(nop->vcc))
@@ -90,10 +84,11 @@ static int nop_init(struct usb_phy *phy)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_gen_phy_init);
 
-static void nop_shutdown(struct usb_phy *phy)
+void usb_gen_phy_shutdown(struct usb_phy *phy)
 {
-	struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev);
+	struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
 
 	if (!IS_ERR(nop->reset)) {
 		/* Assert RESET */
@@ -109,6 +104,7 @@ static void nop_shutdown(struct usb_phy *phy)
 			dev_err(phy->dev, "Failed to disable power\n");
 	}
 }
+EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
 
 static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
 {
@@ -139,52 +135,27 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
 	return 0;
 }
 
-static int nop_usb_xceiv_probe(struct platform_device *pdev)
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
+		enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
+		bool needs_reset)
 {
-	struct device *dev = &pdev->dev;
-	struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data;
-	struct nop_usb_xceiv	*nop;
-	enum usb_phy_type	type = USB_PHY_TYPE_USB2;
 	int err;
-	u32 clk_rate = 0;
-	bool needs_vcc = false;
-	bool needs_reset = false;
-
-	nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL);
-	if (!nop)
-		return -ENOMEM;
 
-	nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg),
-							GFP_KERNEL);
+	nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
+			GFP_KERNEL);
 	if (!nop->phy.otg)
 		return -ENOMEM;
 
-	if (dev->of_node) {
-		struct device_node *node = dev->of_node;
-
-		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
-			clk_rate = 0;
-
-		needs_vcc = of_property_read_bool(node, "vcc-supply");
-		needs_reset = of_property_read_bool(node, "reset-supply");
-
-	} else if (pdata) {
-		type = pdata->type;
-		clk_rate = pdata->clk_rate;
-		needs_vcc = pdata->needs_vcc;
-		needs_reset = pdata->needs_reset;
-	}
-
-	nop->clk = devm_clk_get(&pdev->dev, "main_clk");
+	nop->clk = devm_clk_get(dev, "main_clk");
 	if (IS_ERR(nop->clk)) {
-		dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n",
+		dev_dbg(dev, "Can't get phy clock: %ld\n",
 					PTR_ERR(nop->clk));
 	}
 
 	if (!IS_ERR(nop->clk) && clk_rate) {
 		err = clk_set_rate(nop->clk, clk_rate);
 		if (err) {
-			dev_err(&pdev->dev, "Error setting clock rate\n");
+			dev_err(dev, "Error setting clock rate\n");
 			return err;
 		}
 	}
@@ -192,33 +163,31 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
 	if (!IS_ERR(nop->clk)) {
 		err = clk_prepare(nop->clk);
 		if (err) {
-			dev_err(&pdev->dev, "Error preparing clock\n");
+			dev_err(dev, "Error preparing clock\n");
 			return err;
 		}
 	}
 
-	nop->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	nop->vcc = devm_regulator_get(dev, "vcc");
 	if (IS_ERR(nop->vcc)) {
-		dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n",
+		dev_dbg(dev, "Error getting vcc regulator: %ld\n",
 					PTR_ERR(nop->vcc));
 		if (needs_vcc)
 			return -EPROBE_DEFER;
 	}
 
-	nop->reset = devm_regulator_get(&pdev->dev, "reset");
+	nop->reset = devm_regulator_get(dev, "reset");
 	if (IS_ERR(nop->reset)) {
-		dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n",
+		dev_dbg(dev, "Error getting reset regulator: %ld\n",
 					PTR_ERR(nop->reset));
 		if (needs_reset)
 			return -EPROBE_DEFER;
 	}
 
-	nop->dev		= &pdev->dev;
+	nop->dev		= dev;
 	nop->phy.dev		= nop->dev;
 	nop->phy.label		= "nop-xceiv";
 	nop->phy.set_suspend	= nop_set_suspend;
-	nop->phy.init		= nop_init;
-	nop->phy.shutdown	= nop_shutdown;
 	nop->phy.state		= OTG_STATE_UNDEFINED;
 	nop->phy.type		= type;
 
@@ -226,6 +195,59 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
 	nop->phy.otg->set_host		= nop_set_host;
 	nop->phy.otg->set_peripheral	= nop_set_peripheral;
 
+	ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
+
+void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop)
+{
+	if (!IS_ERR(nop->clk))
+		clk_unprepare(nop->clk);
+}
+EXPORT_SYMBOL_GPL(usb_phy_gen_cleanup_phy);
+
+static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_phy_gen_xceiv_platform_data *pdata =
+			dev_get_platdata(&pdev->dev);
+	struct usb_phy_gen_xceiv	*nop;
+	enum usb_phy_type	type = USB_PHY_TYPE_USB2;
+	int err;
+	u32 clk_rate = 0;
+	bool needs_vcc = false;
+	bool needs_reset = false;
+
+	if (dev->of_node) {
+		struct device_node *node = dev->of_node;
+
+		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
+			clk_rate = 0;
+
+		needs_vcc = of_property_read_bool(node, "vcc-supply");
+		needs_reset = of_property_read_bool(node, "reset-supply");
+
+	} else if (pdata) {
+		type = pdata->type;
+		clk_rate = pdata->clk_rate;
+		needs_vcc = pdata->needs_vcc;
+		needs_reset = pdata->needs_reset;
+	}
+
+	nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
+	if (!nop)
+		return -ENOMEM;
+
+
+	err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc,
+			needs_reset);
+	if (err)
+		return err;
+
+	nop->phy.init		= usb_gen_phy_init;
+	nop->phy.shutdown	= usb_gen_phy_shutdown;
+
 	err = usb_add_phy_dev(&nop->phy);
 	if (err) {
 		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
@@ -235,23 +257,18 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, nop);
 
-	ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier);
-
 	return 0;
 
 err_add:
-	if (!IS_ERR(nop->clk))
-		clk_unprepare(nop->clk);
+	usb_phy_gen_cleanup_phy(nop);
 	return err;
 }
 
-static int nop_usb_xceiv_remove(struct platform_device *pdev)
+static int usb_phy_gen_xceiv_remove(struct platform_device *pdev)
 {
-	struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
-
-	if (!IS_ERR(nop->clk))
-		clk_unprepare(nop->clk);
+	struct usb_phy_gen_xceiv *nop = platform_get_drvdata(pdev);
 
+	usb_phy_gen_cleanup_phy(nop);
 	usb_remove_phy(&nop->phy);
 
 	return 0;
@@ -264,29 +281,29 @@ static const struct of_device_id nop_xceiv_dt_ids[] = {
 
 MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
 
-static struct platform_driver nop_usb_xceiv_driver = {
-	.probe		= nop_usb_xceiv_probe,
-	.remove		= nop_usb_xceiv_remove,
+static struct platform_driver usb_phy_gen_xceiv_driver = {
+	.probe		= usb_phy_gen_xceiv_probe,
+	.remove		= usb_phy_gen_xceiv_remove,
 	.driver		= {
-		.name	= "nop_usb_xceiv",
+		.name	= "usb_phy_gen_xceiv",
 		.owner	= THIS_MODULE,
 		.of_match_table = nop_xceiv_dt_ids,
 	},
 };
 
-static int __init nop_usb_xceiv_init(void)
+static int __init usb_phy_gen_xceiv_init(void)
 {
-	return platform_driver_register(&nop_usb_xceiv_driver);
+	return platform_driver_register(&usb_phy_gen_xceiv_driver);
 }
-subsys_initcall(nop_usb_xceiv_init);
+subsys_initcall(usb_phy_gen_xceiv_init);
 
-static void __exit nop_usb_xceiv_exit(void)
+static void __exit usb_phy_gen_xceiv_exit(void)
 {
-	platform_driver_unregister(&nop_usb_xceiv_driver);
+	platform_driver_unregister(&usb_phy_gen_xceiv_driver);
 }
-module_exit(nop_usb_xceiv_exit);
+module_exit(usb_phy_gen_xceiv_exit);
 
-MODULE_ALIAS("platform:nop_usb_xceiv");
+MODULE_ALIAS("platform:usb_phy_gen_xceiv");
 MODULE_AUTHOR("Texas Instruments Inc");
 MODULE_DESCRIPTION("NOP USB Transceiver driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
new file mode 100644
index 00000000000..61687d5a965
--- /dev/null
+++ b/drivers/usb/phy/phy-generic.h
@@ -0,0 +1,20 @@
+#ifndef _PHY_GENERIC_H_
+#define _PHY_GENERIC_H_
+
+struct usb_phy_gen_xceiv {
+	struct usb_phy phy;
+	struct device *dev;
+	struct clk *clk;
+	struct regulator *vcc;
+	struct regulator *reset;
+};
+
+int usb_gen_phy_init(struct usb_phy *phy);
+void usb_gen_phy_shutdown(struct usb_phy *phy);
+
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
+		enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
+		bool needs_reset);
+void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop);
+
+#endif
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index 8443335c2ea..b2f29c9aebb 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -101,7 +101,7 @@ static void gpio_vbus_work(struct work_struct *work)
 {
 	struct gpio_vbus_data *gpio_vbus =
 		container_of(work, struct gpio_vbus_data, work.work);
-	struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
+	struct gpio_vbus_mach_info *pdata = dev_get_platdata(gpio_vbus->dev);
 	int gpio, status, vbus;
 
 	if (!gpio_vbus->phy.otg->gadget)
@@ -155,7 +155,7 @@ static void gpio_vbus_work(struct work_struct *work)
 static irqreturn_t gpio_vbus_irq(int irq, void *data)
 {
 	struct platform_device *pdev = data;
-	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
+	struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
 	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
 	struct usb_otg *otg = gpio_vbus->phy.otg;
 
@@ -182,7 +182,7 @@ static int gpio_vbus_set_peripheral(struct usb_otg *otg,
 
 	gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy);
 	pdev = to_platform_device(gpio_vbus->dev);
-	pdata = gpio_vbus->dev->platform_data;
+	pdata = dev_get_platdata(gpio_vbus->dev);
 	gpio = pdata->gpio_pullup;
 
 	if (!gadget) {
@@ -243,7 +243,7 @@ static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
 
 static int __init gpio_vbus_probe(struct platform_device *pdev)
 {
-	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
+	struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
 	struct gpio_vbus_data *gpio_vbus;
 	struct resource *res;
 	int err, gpio, irq;
@@ -352,7 +352,7 @@ err_gpio:
 static int __exit gpio_vbus_remove(struct platform_device *pdev)
 {
 	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
-	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
+	struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
 	int gpio = pdata->gpio_vbus;
 
 	device_init_wakeup(&pdev->dev, 0);
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index ae481afcb3e..d3a5160e4cc 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -40,9 +40,7 @@
 
 #include <mach/usb.h>
 
-#ifndef	DEBUG
-#undef	VERBOSE
-#endif
+#undef VERBOSE
 
 
 #define	DRIVER_VERSION	"24 August 2004"
@@ -387,7 +385,6 @@ static void b_idle(struct isp1301 *isp, const char *tag)
 static void
 dump_regs(struct isp1301 *isp, const char *label)
 {
-#ifdef	DEBUG
 	u8	ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1);
 	u8	status = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
 	u8	src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
@@ -396,7 +393,6 @@ dump_regs(struct isp1301 *isp, const char *label)
 		omap_readl(OTG_CTRL), label, state_name(isp),
 		ctrl, status, src);
 	/* mode control and irq enables don't change much */
-#endif
 }
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index d08f33435e9..e9d4cd960ec 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -1419,7 +1419,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
 	struct usb_phy *phy;
 
 	dev_info(&pdev->dev, "msm_otg probe\n");
-	if (!pdev->dev.platform_data) {
+	if (!dev_get_platdata(&pdev->dev)) {
 		dev_err(&pdev->dev, "No platform data given. Bailing out\n");
 		return -ENODEV;
 	}
@@ -1436,7 +1436,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	motg->pdata = pdev->dev.platform_data;
+	motg->pdata = dev_get_platdata(&pdev->dev);
 	phy = &motg->phy;
 	phy->dev = &pdev->dev;
 
diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c
index 1568ea63e33..d317903022b 100644
--- a/drivers/usb/phy/phy-mv-u3d-usb.c
+++ b/drivers/usb/phy/phy-mv-u3d-usb.c
@@ -82,7 +82,7 @@ static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value)
 	writel_relaxed(value, data);
 }
 
-void mv_u3d_phy_shutdown(struct usb_phy *phy)
+static void mv_u3d_phy_shutdown(struct usb_phy *phy)
 {
 	struct mv_u3d_phy *mv_u3d_phy;
 	void __iomem *base;
@@ -271,7 +271,7 @@ static int mv_u3d_phy_probe(struct platform_device *pdev)
 	void __iomem	*phy_base;
 	int	ret;
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata) {
 		dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
 		return -EINVAL;
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index 4a6b03c7387..98f6ac6a78e 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -653,7 +653,7 @@ static struct attribute_group inputs_attr_group = {
 	.attrs = inputs_attrs,
 };
 
-int mv_otg_remove(struct platform_device *pdev)
+static int mv_otg_remove(struct platform_device *pdev)
 {
 	struct mv_otg *mvotg = platform_get_drvdata(pdev);
 
@@ -673,7 +673,7 @@ int mv_otg_remove(struct platform_device *pdev)
 
 static int mv_otg_probe(struct platform_device *pdev)
 {
-	struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
+	struct mv_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct mv_otg *mvotg;
 	struct usb_otg *otg;
 	struct resource *r;
@@ -893,7 +893,7 @@ static int mv_otg_resume(struct platform_device *pdev)
 
 static struct platform_driver mv_otg_driver = {
 	.probe = mv_otg_probe,
-	.remove = __exit_p(mv_otg_remove),
+	.remove = mv_otg_remove,
 	.driver = {
 		   .owner = THIS_MODULE,
 		   .name = driver_name,
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index bd601c537c8..fdd33b44dbd 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -41,11 +41,14 @@ struct mxs_phy {
 
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
-static void mxs_phy_hw_init(struct mxs_phy *mxs_phy)
+static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
+	int ret;
 	void __iomem *base = mxs_phy->phy.io_priv;
 
-	stmp_reset_block(base + HW_USBPHY_CTRL);
+	ret = stmp_reset_block(base + HW_USBPHY_CTRL);
+	if (ret)
+		return ret;
 
 	/* Power up the PHY */
 	writel(0, base + HW_USBPHY_PWD);
@@ -54,6 +57,8 @@ static void mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	writel(BM_USBPHY_CTRL_ENUTMILEVEL2 |
 	       BM_USBPHY_CTRL_ENUTMILEVEL3,
 	       base + HW_USBPHY_CTRL_SET);
+
+	return 0;
 }
 
 static int mxs_phy_init(struct usb_phy *phy)
@@ -61,9 +66,7 @@ static int mxs_phy_init(struct usb_phy *phy)
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 
 	clk_prepare_enable(mxs_phy->clk);
-	mxs_phy_hw_init(mxs_phy);
-
-	return 0;
+	return mxs_phy_hw_init(mxs_phy);
 }
 
 static void mxs_phy_shutdown(struct usb_phy *phy)
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index 1419ceda975..a4dda8e1256 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -197,7 +197,8 @@ static int omap_control_usb_probe(struct platform_device *pdev)
 {
 	struct resource	*res;
 	struct device_node *np = pdev->dev.of_node;
-	struct omap_control_usb_platform_data *pdata = pdev->dev.platform_data;
+	struct omap_control_usb_platform_data *pdata =
+			dev_get_platdata(&pdev->dev);
 
 	control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
 		GFP_KERNEL);
diff --git a/drivers/usb/phy/phy-omap-usb2.c b/drivers/usb/phy/phy-omap-usb2.c
index 844ab68f08d..d266861d24f 100644
--- a/drivers/usb/phy/phy-omap-usb2.c
+++ b/drivers/usb/phy/phy-omap-usb2.c
@@ -98,8 +98,8 @@ static int omap_usb_set_peripheral(struct usb_otg *otg,
 
 static int omap_usb2_suspend(struct usb_phy *x, int suspend)
 {
-	u32 ret;
 	struct omap_usb *phy = phy_to_omapusb(x);
+	int ret;
 
 	if (suspend && !phy->is_suspended) {
 		omap_control_usb_phy_power(phy->control_dev, 0);
@@ -108,8 +108,7 @@ static int omap_usb2_suspend(struct usb_phy *x, int suspend)
 	} else if (!suspend && phy->is_suspended) {
 		ret = pm_runtime_get_sync(phy->dev);
 		if (ret < 0) {
-			dev_err(phy->dev, "get_sync failed with err %d\n",
-									ret);
+			dev_err(phy->dev, "get_sync failed with err %d\n", ret);
 			return ret;
 		}
 		omap_control_usb_phy_power(phy->control_dev, 1);
@@ -209,9 +208,9 @@ static int omap_usb2_runtime_suspend(struct device *dev)
 
 static int omap_usb2_runtime_resume(struct device *dev)
 {
-	u32 ret = 0;
 	struct platform_device	*pdev = to_platform_device(dev);
 	struct omap_usb	*phy = platform_get_drvdata(pdev);
+	int ret;
 
 	ret = clk_enable(phy->wkupclk);
 	if (ret < 0) {
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index a2fb30bbb97..fc15694d303 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -27,7 +27,6 @@
 #include <linux/delay.h>
 #include <linux/usb/omap_control_usb.h>
 
-#define	NUM_SYS_CLKS		6
 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
 #define	PLL_CONFIGURATION1	0x0000000C
@@ -57,26 +56,32 @@
  */
 # define PLL_IDLE_TIME  100;
 
-enum sys_clk_rate {
-	CLK_RATE_UNDEFINED = -1,
-	CLK_RATE_12MHZ,
-	CLK_RATE_16MHZ,
-	CLK_RATE_19MHZ,
-	CLK_RATE_20MHZ,
-	CLK_RATE_26MHZ,
-	CLK_RATE_38MHZ
+struct usb_dpll_map {
+	unsigned long rate;
+	struct usb_dpll_params params;
 };
 
-static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = {
-	{1250, 5, 4, 20, 0},		/* 12 MHz */
-	{3125, 20, 4, 20, 0},		/* 16.8 MHz */
-	{1172, 8, 4, 20, 65537},	/* 19.2 MHz */
-	{1000, 7, 4, 10, 0},            /* 20 MHz */
-	{1250, 12, 4, 20, 0},		/* 26 MHz */
-	{3125, 47, 4, 20, 92843},	/* 38.4 MHz */
-
+static struct usb_dpll_map dpll_map[] = {
+	{12000000, {1250, 5, 4, 20, 0} },	/* 12 MHz */
+	{16800000, {3125, 20, 4, 20, 0} },	/* 16.8 MHz */
+	{19200000, {1172, 8, 4, 20, 65537} },	/* 19.2 MHz */
+	{20000000, {1000, 7, 4, 10, 0} },	/* 20 MHz */
+	{26000000, {1250, 12, 4, 20, 0} },	/* 26 MHz */
+	{38400000, {3125, 47, 4, 20, 92843} },	/* 38.4 MHz */
 };
 
+static struct usb_dpll_params *omap_usb3_get_dpll_params(unsigned long rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dpll_map); i++) {
+		if (rate == dpll_map[i].rate)
+			return &dpll_map[i].params;
+	}
+
+	return 0;
+}
+
 static int omap_usb3_suspend(struct usb_phy *x, int suspend)
 {
 	struct omap_usb *phy = phy_to_omapusb(x);
@@ -116,26 +121,6 @@ static int omap_usb3_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
-static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate)
-{
-	switch (rate) {
-	case 12000000:
-		return CLK_RATE_12MHZ;
-	case 16800000:
-		return CLK_RATE_16MHZ;
-	case 19200000:
-		return CLK_RATE_19MHZ;
-	case 20000000:
-		return CLK_RATE_20MHZ;
-	case 26000000:
-		return CLK_RATE_26MHZ;
-	case 38400000:
-		return CLK_RATE_38MHZ;
-	default:
-		return CLK_RATE_UNDEFINED;
-	}
-}
-
 static void omap_usb_dpll_relock(struct omap_usb *phy)
 {
 	u32		val;
@@ -155,39 +140,39 @@ static int omap_usb_dpll_lock(struct omap_usb *phy)
 {
 	u32			val;
 	unsigned long		rate;
-	enum sys_clk_rate	clk_index;
-
-	rate		= clk_get_rate(phy->sys_clk);
-	clk_index	= __get_sys_clk_index(rate);
+	struct usb_dpll_params *dpll_params;
 
-	if (clk_index == CLK_RATE_UNDEFINED) {
-		pr_err("dpll cannot be locked for sys clk freq:%luHz\n", rate);
+	rate = clk_get_rate(phy->sys_clk);
+	dpll_params = omap_usb3_get_dpll_params(rate);
+	if (!dpll_params) {
+		dev_err(phy->dev,
+			  "No DPLL configuration for %lu Hz SYS CLK\n", rate);
 		return -EINVAL;
 	}
 
 	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
 	val &= ~PLL_REGN_MASK;
-	val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT;
+	val |= dpll_params->n << PLL_REGN_SHIFT;
 	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
 
 	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
 	val &= ~PLL_SELFREQDCO_MASK;
-	val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT;
+	val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
 	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
 
 	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
 	val &= ~PLL_REGM_MASK;
-	val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT;
+	val |= dpll_params->m << PLL_REGM_SHIFT;
 	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
 
 	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
 	val &= ~PLL_REGM_F_MASK;
-	val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT;
+	val |= dpll_params->mf << PLL_REGM_F_SHIFT;
 	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
 
 	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
 	val &= ~PLL_SD_MASK;
-	val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT;
+	val |= dpll_params->sd << PLL_SD_SHIFT;
 	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
 
 	omap_usb_dpll_relock(phy);
@@ -198,8 +183,12 @@ static int omap_usb_dpll_lock(struct omap_usb *phy)
 static int omap_usb3_init(struct usb_phy *x)
 {
 	struct omap_usb	*phy = phy_to_omapusb(x);
+	int ret;
+
+	ret = omap_usb_dpll_lock(phy);
+	if (ret)
+		return ret;
 
-	omap_usb_dpll_lock(phy);
 	omap_control_usb3_phy_power(phy->control_dev, 1);
 
 	return 0;
diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c
index ae909408958..33265a5b2cd 100644
--- a/drivers/usb/phy/phy-rcar-usb.c
+++ b/drivers/usb/phy/phy-rcar-usb.c
@@ -83,7 +83,7 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
 {
 	struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
 	struct device *dev = phy->dev;
-	struct rcar_phy_platform_data *pdata = dev->platform_data;
+	struct rcar_phy_platform_data *pdata = dev_get_platdata(dev);
 	void __iomem *reg0 = priv->reg0;
 	void __iomem *reg1 = priv->reg1;
 	static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT };
@@ -184,17 +184,12 @@ static int rcar_usb_phy_probe(struct platform_device *pdev)
 	void __iomem *reg0, *reg1 = NULL;
 	int ret;
 
-	if (!pdev->dev.platform_data) {
+	if (!dev_get_platdata(&pdev->dev)) {
 		dev_err(dev, "No platform data\n");
 		return -EINVAL;
 	}
 
 	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res0) {
-		dev_err(dev, "Not enough platform resources\n");
-		return -EINVAL;
-	}
-
 	reg0 = devm_ioremap_resource(dev, res0);
 	if (IS_ERR(reg0))
 		return PTR_ERR(reg0);
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 758b86d0fcb..ff70e4b19b9 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -359,7 +359,7 @@ static int samsung_usb2phy_probe(struct platform_device *pdev)
 {
 	struct samsung_usbphy *sphy;
 	struct usb_otg *otg;
-	struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
+	struct samsung_usbphy_data *pdata = dev_get_platdata(&pdev->dev);
 	const struct samsung_usbphy_drvdata *drv_data;
 	struct device *dev = &pdev->dev;
 	struct resource *phy_mem;
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
index 300e0cf5e31..c6eb22213de 100644
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -231,7 +231,7 @@ static void samsung_usb3phy_shutdown(struct usb_phy *phy)
 static int samsung_usb3phy_probe(struct platform_device *pdev)
 {
 	struct samsung_usbphy *sphy;
-	struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
+	struct samsung_usbphy_data *pdata = dev_get_platdata(&pdev->dev);
 	struct device *dev = &pdev->dev;
 	struct resource *phy_mem;
 	void __iomem	*phy_base;
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index cec0855ed24..e9cb1cb8abc 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -28,20 +28,28 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
+#include <linux/usb/of.h>
 #include <asm/mach-types.h>
 #include <linux/usb/ehci_def.h>
 #include <linux/usb/tegra_usb_phy.h>
+#include <linux/regulator/consumer.h>
 
 #define ULPI_VIEWPORT		0x170
 
-/* PORTSC registers */
+/* PORTSC PTS/PHCD bits, Tegra20 only */
 #define TEGRA_USB_PORTSC1				0x184
 #define TEGRA_USB_PORTSC1_PTS(x)			(((x) & 0x3) << 30)
 #define TEGRA_USB_PORTSC1_PHCD				(1 << 23)
 
+/* HOSTPC1 PTS/PHCD bits, Tegra30 and above */
+#define TEGRA_USB_HOSTPC1_DEVLC		0x1b4
+#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x)	(((x) & 0x7) << 29)
+#define TEGRA_USB_HOSTPC1_DEVLC_PHCD	(1 << 22)
+
 /* Bits of PORTSC1, which will get cleared by writing 1 into them */
 #define TEGRA_PORTSC1_RWC_BITS	(PORT_CSC | PORT_PEC | PORT_OCC)
 
@@ -84,16 +92,22 @@
 
 #define UTMIP_XCVR_CFG0		0x808
 #define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
+#define   UTMIP_XCVR_SETUP_MSB(x)		((((x) & 0x70) >> 4) << 22)
 #define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
 #define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
 #define   UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
 #define   UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
 #define   UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
-#define   UTMIP_XCVR_HSSLEW_MSB(x)		(((x) & 0x7f) << 25)
+#define   UTMIP_XCVR_LSBIAS_SEL			(1 << 21)
+#define   UTMIP_XCVR_HSSLEW(x)			(((x) & 0x3) << 4)
+#define   UTMIP_XCVR_HSSLEW_MSB(x)		((((x) & 0x1fc) >> 2) << 25)
 
 #define UTMIP_BIAS_CFG0		0x80c
 #define   UTMIP_OTGPD			(1 << 11)
 #define   UTMIP_BIASPD			(1 << 10)
+#define   UTMIP_HSSQUELCH_LEVEL(x)	(((x) & 0x3) << 0)
+#define   UTMIP_HSDISCON_LEVEL(x)	(((x) & 0x3) << 2)
+#define   UTMIP_HSDISCON_LEVEL_MSB(x)	((((x) & 0x4) >> 2) << 24)
 
 #define UTMIP_HSRX_CFG0		0x810
 #define   UTMIP_ELASTIC_LIMIT(x)	(((x) & 0x1f) << 10)
@@ -137,6 +151,12 @@
 #define UTMIP_BIAS_CFG1		0x83c
 #define   UTMIP_BIAS_PDTRK_COUNT(x)	(((x) & 0x1f) << 3)
 
+/* For Tegra30 and above only, the address is different in Tegra20 */
+#define USB_USBMODE		0x1f8
+#define   USB_USBMODE_MASK		(3 << 0)
+#define   USB_USBMODE_HOST		(3 << 0)
+#define   USB_USBMODE_DEVICE		(2 << 0)
+
 static DEFINE_SPINLOCK(utmip_pad_lock);
 static int utmip_pad_count;
 
@@ -184,36 +204,22 @@ static const struct tegra_xtal_freq tegra_freq_table[] = {
 	},
 };
 
-static struct tegra_utmip_config utmip_default[] = {
-	[0] = {
-		.hssync_start_delay = 9,
-		.idle_wait_delay = 17,
-		.elastic_limit = 16,
-		.term_range_adj = 6,
-		.xcvr_setup = 9,
-		.xcvr_lsfslew = 1,
-		.xcvr_lsrslew = 1,
-	},
-	[2] = {
-		.hssync_start_delay = 9,
-		.idle_wait_delay = 17,
-		.elastic_limit = 16,
-		.term_range_adj = 6,
-		.xcvr_setup = 9,
-		.xcvr_lsfslew = 2,
-		.xcvr_lsrslew = 2,
-	},
-};
-
 static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
 {
 	void __iomem *base = phy->regs;
 	unsigned long val;
 
-	val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
-	val &= ~TEGRA_USB_PORTSC1_PTS(3);
-	val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3);
-	writel(val, base + TEGRA_USB_PORTSC1);
+	if (phy->soc_config->has_hostpc) {
+		val = readl(base + TEGRA_USB_HOSTPC1_DEVLC);
+		val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0);
+		val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val);
+		writel(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+	} else {
+		val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+		val &= ~TEGRA_USB_PORTSC1_PTS(~0);
+		val |= TEGRA_USB_PORTSC1_PTS(pts_val);
+		writel(val, base + TEGRA_USB_PORTSC1);
+	}
 }
 
 static void set_phcd(struct tegra_usb_phy *phy, bool enable)
@@ -221,17 +227,26 @@ static void set_phcd(struct tegra_usb_phy *phy, bool enable)
 	void __iomem *base = phy->regs;
 	unsigned long val;
 
-	val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
-	if (enable)
-		val |= TEGRA_USB_PORTSC1_PHCD;
-	else
-		val &= ~TEGRA_USB_PORTSC1_PHCD;
-	writel(val, base + TEGRA_USB_PORTSC1);
+	if (phy->soc_config->has_hostpc) {
+		val = readl(base + TEGRA_USB_HOSTPC1_DEVLC);
+		if (enable)
+			val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD;
+		else
+			val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD;
+		writel(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+	} else {
+		val = readl(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS;
+		if (enable)
+			val |= TEGRA_USB_PORTSC1_PHCD;
+		else
+			val &= ~TEGRA_USB_PORTSC1_PHCD;
+		writel(val, base + TEGRA_USB_PORTSC1);
+	}
 }
 
 static int utmip_pad_open(struct tegra_usb_phy *phy)
 {
-	phy->pad_clk = devm_clk_get(phy->dev, "utmi-pads");
+	phy->pad_clk = devm_clk_get(phy->u_phy.dev, "utmi-pads");
 	if (IS_ERR(phy->pad_clk)) {
 		pr_err("%s: can't get utmip pad clock\n", __func__);
 		return PTR_ERR(phy->pad_clk);
@@ -244,6 +259,7 @@ static void utmip_pad_power_on(struct tegra_usb_phy *phy)
 {
 	unsigned long val, flags;
 	void __iomem *base = phy->pad_regs;
+	struct tegra_utmip_config *config = phy->config;
 
 	clk_prepare_enable(phy->pad_clk);
 
@@ -252,6 +268,16 @@ static void utmip_pad_power_on(struct tegra_usb_phy *phy)
 	if (utmip_pad_count++ == 0) {
 		val = readl(base + UTMIP_BIAS_CFG0);
 		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
+
+		if (phy->soc_config->requires_extra_tuning_parameters) {
+			val &= ~(UTMIP_HSSQUELCH_LEVEL(~0) |
+				UTMIP_HSDISCON_LEVEL(~0) |
+				UTMIP_HSDISCON_LEVEL_MSB(~0));
+
+			val |= UTMIP_HSSQUELCH_LEVEL(config->hssquelch_level);
+			val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level);
+			val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level);
+		}
 		writel(val, base + UTMIP_BIAS_CFG0);
 	}
 
@@ -361,7 +387,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 	}
 
 	val = readl(base + UTMIP_TX_CFG0);
-	val &= ~UTMIP_FS_PREABMLE_J;
+	val |= UTMIP_FS_PREABMLE_J;
 	writel(val, base + UTMIP_TX_CFG0);
 
 	val = readl(base + UTMIP_HSRX_CFG0);
@@ -384,34 +410,56 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
 	writel(val, base + UTMIP_MISC_CFG0);
 
-	val = readl(base + UTMIP_MISC_CFG1);
-	val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0));
-	val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
-		UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
-	writel(val, base + UTMIP_MISC_CFG1);
-
-	val = readl(base + UTMIP_PLL_CFG1);
-	val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
-	val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
-		UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
-	writel(val, base + UTMIP_PLL_CFG1);
+	if (!phy->soc_config->utmi_pll_config_in_car_module) {
+		val = readl(base + UTMIP_MISC_CFG1);
+		val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) |
+			UTMIP_PLLU_STABLE_COUNT(~0));
+		val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
+			UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
+		writel(val, base + UTMIP_MISC_CFG1);
+
+		val = readl(base + UTMIP_PLL_CFG1);
+		val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) |
+			UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
+		val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
+			UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
+		writel(val, base + UTMIP_PLL_CFG1);
+	}
 
-	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+	if (phy->mode == USB_DR_MODE_PERIPHERAL) {
 		val = readl(base + USB_SUSP_CTRL);
 		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
 		writel(val, base + USB_SUSP_CTRL);
+
+		val = readl(base + UTMIP_BAT_CHRG_CFG0);
+		val &= ~UTMIP_PD_CHRG;
+		writel(val, base + UTMIP_BAT_CHRG_CFG0);
+	} else {
+		val = readl(base + UTMIP_BAT_CHRG_CFG0);
+		val |= UTMIP_PD_CHRG;
+		writel(val, base + UTMIP_BAT_CHRG_CFG0);
 	}
 
 	utmip_pad_power_on(phy);
 
 	val = readl(base + UTMIP_XCVR_CFG0);
 	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
-		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
-		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
-		 UTMIP_XCVR_HSSLEW_MSB(~0));
-	val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL |
+		 UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) |
+		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0));
+
+	if (!config->xcvr_setup_use_fuses) {
+		val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+		val |= UTMIP_XCVR_SETUP_MSB(config->xcvr_setup);
+	}
 	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
 	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
+
+	if (phy->soc_config->requires_extra_tuning_parameters) {
+		val &= ~(UTMIP_XCVR_HSSLEW(~0) | UTMIP_XCVR_HSSLEW_MSB(~0));
+		val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew);
+		val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew);
+	}
 	writel(val, base + UTMIP_XCVR_CFG0);
 
 	val = readl(base + UTMIP_XCVR_CFG1);
@@ -420,23 +468,19 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
 	writel(val, base + UTMIP_XCVR_CFG1);
 
-	val = readl(base + UTMIP_BAT_CHRG_CFG0);
-	val &= ~UTMIP_PD_CHRG;
-	writel(val, base + UTMIP_BAT_CHRG_CFG0);
-
 	val = readl(base + UTMIP_BIAS_CFG1);
 	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
 	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
 	writel(val, base + UTMIP_BIAS_CFG1);
 
-	if (phy->is_legacy_phy) {
-		val = readl(base + UTMIP_SPARE_CFG0);
-		if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE)
-			val &= ~FUSE_SETUP_SEL;
-		else
-			val |= FUSE_SETUP_SEL;
-		writel(val, base + UTMIP_SPARE_CFG0);
-	} else {
+	val = readl(base + UTMIP_SPARE_CFG0);
+	if (config->xcvr_setup_use_fuses)
+		val |= FUSE_SETUP_SEL;
+	else
+		val &= ~FUSE_SETUP_SEL;
+	writel(val, base + UTMIP_SPARE_CFG0);
+
+	if (!phy->is_legacy_phy) {
 		val = readl(base + USB_SUSP_CTRL);
 		val |= UTMIP_PHY_ENABLE;
 		writel(val, base + USB_SUSP_CTRL);
@@ -459,6 +503,16 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 
 	utmi_phy_clk_enable(phy);
 
+	if (phy->soc_config->requires_usbmode_setup) {
+		val = readl(base + USB_USBMODE);
+		val &= ~USB_USBMODE_MASK;
+		if (phy->mode == USB_DR_MODE_HOST)
+			val |= USB_USBMODE_HOST;
+		else
+			val |= USB_USBMODE_DEVICE;
+		writel(val, base + USB_USBMODE);
+	}
+
 	if (!phy->is_legacy_phy)
 		set_pts(phy, 0);
 
@@ -472,7 +526,7 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy)
 
 	utmi_phy_clk_disable(phy);
 
-	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+	if (phy->mode == USB_DR_MODE_PERIPHERAL) {
 		val = readl(base + USB_SUSP_CTRL);
 		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
 		val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
@@ -560,13 +614,15 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
 
 	ret = gpio_direction_output(phy->reset_gpio, 0);
 	if (ret < 0) {
-		dev_err(phy->dev, "gpio %d not set to 0\n", phy->reset_gpio);
+		dev_err(phy->u_phy.dev, "gpio %d not set to 0\n",
+			phy->reset_gpio);
 		return ret;
 	}
 	msleep(5);
 	ret = gpio_direction_output(phy->reset_gpio, 1);
 	if (ret < 0) {
-		dev_err(phy->dev, "gpio %d not set to 1\n", phy->reset_gpio);
+		dev_err(phy->u_phy.dev, "gpio %d not set to 1\n",
+			phy->reset_gpio);
 		return ret;
 	}
 
@@ -634,6 +690,9 @@ static void tegra_usb_phy_close(struct usb_phy *x)
 {
 	struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
 
+	if (!IS_ERR(phy->vbus))
+		regulator_disable(phy->vbus);
+
 	clk_disable_unprepare(phy->pll_u);
 }
 
@@ -666,29 +725,30 @@ static int ulpi_open(struct tegra_usb_phy *phy)
 {
 	int err;
 
-	phy->clk = devm_clk_get(phy->dev, "ulpi-link");
+	phy->clk = devm_clk_get(phy->u_phy.dev, "ulpi-link");
 	if (IS_ERR(phy->clk)) {
 		pr_err("%s: can't get ulpi clock\n", __func__);
 		return PTR_ERR(phy->clk);
 	}
 
-	err = devm_gpio_request(phy->dev, phy->reset_gpio, "ulpi_phy_reset_b");
+	err = devm_gpio_request(phy->u_phy.dev, phy->reset_gpio,
+		"ulpi_phy_reset_b");
 	if (err < 0) {
-		dev_err(phy->dev, "request failed for gpio: %d\n",
+		dev_err(phy->u_phy.dev, "request failed for gpio: %d\n",
 		       phy->reset_gpio);
 		return err;
 	}
 
 	err = gpio_direction_output(phy->reset_gpio, 0);
 	if (err < 0) {
-		dev_err(phy->dev, "gpio %d direction not set to output\n",
+		dev_err(phy->u_phy.dev, "gpio %d direction not set to output\n",
 		       phy->reset_gpio);
 		return err;
 	}
 
 	phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
 	if (!phy->ulpi) {
-		dev_err(phy->dev, "otg_ulpi_create returned NULL\n");
+		dev_err(phy->u_phy.dev, "otg_ulpi_create returned NULL\n");
 		err = -ENOMEM;
 		return err;
 	}
@@ -703,14 +763,7 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy)
 	int i;
 	int err;
 
-	if (!phy->is_ulpi_phy) {
-		if (phy->is_legacy_phy)
-			phy->config = &utmip_default[0];
-		else
-			phy->config = &utmip_default[2];
-	}
-
-	phy->pll_u = devm_clk_get(phy->dev, "pll_u");
+	phy->pll_u = devm_clk_get(phy->u_phy.dev, "pll_u");
 	if (IS_ERR(phy->pll_u)) {
 		pr_err("Can't get pll_u clock\n");
 		return PTR_ERR(phy->pll_u);
@@ -733,6 +786,16 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy)
 		goto fail;
 	}
 
+	if (!IS_ERR(phy->vbus)) {
+		err = regulator_enable(phy->vbus);
+		if (err) {
+			dev_err(phy->u_phy.dev,
+				"failed to enable usb vbus regulator: %d\n",
+				err);
+			goto fail;
+		}
+	}
+
 	if (phy->is_ulpi_phy)
 		err = ulpi_open(phy);
 	else
@@ -784,11 +847,138 @@ void tegra_ehci_phy_restore_end(struct usb_phy *x)
 }
 EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
 
+static int read_utmi_param(struct platform_device *pdev, const char *param,
+			   u8 *dest)
+{
+	u32 value;
+	int err = of_property_read_u32(pdev->dev.of_node, param, &value);
+	*dest = (u8)value;
+	if (err < 0)
+		dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n",
+			param, err);
+	return err;
+}
+
+static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
+			  struct platform_device *pdev)
+{
+	struct resource *res;
+	int err;
+	struct tegra_utmip_config *config;
+
+	tegra_phy->is_ulpi_phy = false;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n");
+		return  -ENXIO;
+	}
+
+	tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
+		resource_size(res));
+	if (!tegra_phy->regs) {
+		dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n");
+		return -ENOMEM;
+	}
+
+	tegra_phy->config = devm_kzalloc(&pdev->dev,
+		sizeof(*tegra_phy->config), GFP_KERNEL);
+	if (!tegra_phy->config) {
+		dev_err(&pdev->dev,
+			"unable to allocate memory for USB UTMIP config\n");
+		return -ENOMEM;
+	}
+
+	config = tegra_phy->config;
+
+	err = read_utmi_param(pdev, "nvidia,hssync-start-delay",
+		&config->hssync_start_delay);
+	if (err < 0)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,elastic-limit",
+		&config->elastic_limit);
+	if (err < 0)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,idle-wait-delay",
+		&config->idle_wait_delay);
+	if (err < 0)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,term-range-adj",
+		&config->term_range_adj);
+	if (err < 0)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew",
+		&config->xcvr_lsfslew);
+	if (err < 0)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew",
+		&config->xcvr_lsrslew);
+	if (err < 0)
+		return err;
+
+	if (tegra_phy->soc_config->requires_extra_tuning_parameters) {
+		err = read_utmi_param(pdev, "nvidia,xcvr-hsslew",
+			&config->xcvr_hsslew);
+		if (err < 0)
+			return err;
+
+		err = read_utmi_param(pdev, "nvidia,hssquelch-level",
+			&config->hssquelch_level);
+		if (err < 0)
+			return err;
+
+		err = read_utmi_param(pdev, "nvidia,hsdiscon-level",
+			&config->hsdiscon_level);
+		if (err < 0)
+			return err;
+	}
+
+	config->xcvr_setup_use_fuses = of_property_read_bool(
+		pdev->dev.of_node, "nvidia,xcvr-setup-use-fuses");
+
+	if (!config->xcvr_setup_use_fuses) {
+		err = read_utmi_param(pdev, "nvidia,xcvr-setup",
+			&config->xcvr_setup);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static const struct tegra_phy_soc_config tegra20_soc_config = {
+	.utmi_pll_config_in_car_module = false,
+	.has_hostpc = false,
+	.requires_usbmode_setup = false,
+	.requires_extra_tuning_parameters = false,
+};
+
+static const struct tegra_phy_soc_config tegra30_soc_config = {
+	.utmi_pll_config_in_car_module = true,
+	.has_hostpc = true,
+	.requires_usbmode_setup = true,
+	.requires_extra_tuning_parameters = true,
+};
+
+static struct of_device_id tegra_usb_phy_id_table[] = {
+	{ .compatible = "nvidia,tegra30-usb-phy", .data = &tegra30_soc_config },
+	{ .compatible = "nvidia,tegra20-usb-phy", .data = &tegra20_soc_config },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table);
+
 static int tegra_usb_phy_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *match;
 	struct resource *res;
 	struct tegra_usb_phy *tegra_phy = NULL;
 	struct device_node *np = pdev->dev.of_node;
+	enum usb_phy_interface phy_type;
 	int err;
 
 	tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL);
@@ -797,6 +987,13 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	match = of_match_device(tegra_usb_phy_id_table, &pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "Error: No device match found\n");
+		return -ENODEV;
+	}
+	tegra_phy->soc_config = match->data;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "Failed to get I/O memory\n");
@@ -813,23 +1010,15 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 	tegra_phy->is_legacy_phy =
 		of_property_read_bool(np, "nvidia,has-legacy-mode");
 
-	err = of_property_match_string(np, "phy_type", "ulpi");
-	if (err < 0) {
-		tegra_phy->is_ulpi_phy = false;
-
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (!res) {
-			dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n");
-			return  -ENXIO;
-		}
+	phy_type = of_usb_get_phy_mode(np);
+	switch (phy_type) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		err = utmi_phy_probe(tegra_phy, pdev);
+		if (err < 0)
+			return err;
+		break;
 
-		tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
-			resource_size(res));
-		if (!tegra_phy->regs) {
-			dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n");
-			return -ENOMEM;
-		}
-	} else {
+	case USBPHY_INTERFACE_MODE_ULPI:
 		tegra_phy->is_ulpi_phy = true;
 
 		tegra_phy->reset_gpio =
@@ -839,19 +1028,35 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 				tegra_phy->reset_gpio);
 			return tegra_phy->reset_gpio;
 		}
+		tegra_phy->config = NULL;
+		break;
+
+	default:
+		dev_err(&pdev->dev, "phy_type is invalid or unsupported\n");
+		return -EINVAL;
 	}
 
-	err = of_property_match_string(np, "dr_mode", "otg");
-	if (err < 0) {
-		err = of_property_match_string(np, "dr_mode", "peripheral");
-		if (err < 0)
-			tegra_phy->mode = TEGRA_USB_PHY_MODE_HOST;
-		else
-			tegra_phy->mode = TEGRA_USB_PHY_MODE_DEVICE;
-	} else
-		tegra_phy->mode = TEGRA_USB_PHY_MODE_OTG;
+	if (of_find_property(np, "dr_mode", NULL))
+		tegra_phy->mode = of_usb_get_dr_mode(np);
+	else
+		tegra_phy->mode = USB_DR_MODE_HOST;
 
-	tegra_phy->dev = &pdev->dev;
+	if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) {
+		dev_err(&pdev->dev, "dr_mode is invalid\n");
+		return -EINVAL;
+	}
+
+	/* On some boards, the VBUS regulator doesn't need to be controlled */
+	if (of_find_property(np, "vbus-supply", NULL)) {
+		tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus");
+		if (IS_ERR(tegra_phy->vbus))
+			return PTR_ERR(tegra_phy->vbus);
+	} else {
+		dev_notice(&pdev->dev, "no vbus regulator");
+		tegra_phy->vbus = ERR_PTR(-ENODEV);
+	}
+
+	tegra_phy->u_phy.dev = &pdev->dev;
 	err = tegra_usb_phy_init(tegra_phy);
 	if (err < 0)
 		return err;
@@ -859,18 +1064,29 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 	tegra_phy->u_phy.shutdown = tegra_usb_phy_close;
 	tegra_phy->u_phy.set_suspend = tegra_usb_phy_suspend;
 
-	dev_set_drvdata(&pdev->dev, tegra_phy);
+	platform_set_drvdata(pdev, tegra_phy);
+
+	err = usb_add_phy_dev(&tegra_phy->u_phy);
+	if (err < 0) {
+		tegra_usb_phy_close(&tegra_phy->u_phy);
+		return err;
+	}
+
 	return 0;
 }
 
-static struct of_device_id tegra_usb_phy_id_table[] = {
-	{ .compatible = "nvidia,tegra20-usb-phy", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table);
+static int tegra_usb_phy_remove(struct platform_device *pdev)
+{
+	struct tegra_usb_phy *tegra_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&tegra_phy->u_phy);
+
+	return 0;
+}
 
 static struct platform_driver tegra_usb_phy_driver = {
 	.probe		= tegra_usb_phy_probe,
+	.remove		= tegra_usb_phy_remove,
 	.driver		= {
 		.name	= "tegra-phy",
 		.owner	= THIS_MODULE,
@@ -879,29 +1095,5 @@ static struct platform_driver tegra_usb_phy_driver = {
 };
 module_platform_driver(tegra_usb_phy_driver);
 
-static int tegra_usb_phy_match(struct device *dev, void *data)
-{
-	struct tegra_usb_phy *tegra_phy = dev_get_drvdata(dev);
-	struct device_node *dn = data;
-
-	return (tegra_phy->dev->of_node == dn) ? 1 : 0;
-}
-
-struct usb_phy *tegra_usb_get_phy(struct device_node *dn)
-{
-	struct device *dev;
-	struct tegra_usb_phy *tegra_phy;
-
-	dev = driver_find_device(&tegra_usb_phy_driver.driver, NULL, dn,
-				 tegra_usb_phy_match);
-	if (!dev)
-		return ERR_PTR(-EPROBE_DEFER);
-
-	tegra_phy = dev_get_drvdata(dev);
-
-	return &tegra_phy->u_phy;
-}
-EXPORT_SYMBOL_GPL(tegra_usb_get_phy);
-
 MODULE_DESCRIPTION("Tegra USB PHY driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c
index 8f78d2d4072..90730c8762b 100644
--- a/drivers/usb/phy/phy-twl4030-usb.c
+++ b/drivers/usb/phy/phy-twl4030-usb.c
@@ -648,7 +648,7 @@ static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
 
 static int twl4030_usb_probe(struct platform_device *pdev)
 {
-	struct twl4030_usb_data *pdata = pdev->dev.platform_data;
+	struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
 	struct twl4030_usb	*twl;
 	int			status, err;
 	struct usb_otg		*otg;
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 1753bd367e0..16dbc938267 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -324,7 +324,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	int			status, err;
 	struct device_node	*np = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
-	struct twl4030_usb_data	*pdata = dev->platform_data;
+	struct twl4030_usb_data	*pdata = dev_get_platdata(dev);
 
 	twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
 	if (!twl)