Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

5 files changed, 71 insertions, 62 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 9b1cbcf8fb7..81f59e8b752 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1529,6 +1529,8 @@ static int acm_reset_resume(struct usb_interface *intf)
 
 static const struct usb_device_id acm_ids[] = {
 	/* quirky and broken devices */
+	{ USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
+	.driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
 	{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aa3aed5458a..92549cc4665 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2131,6 +2131,20 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		termios->c_cflag |= CRTSCTS;
 	}
 
+	/*
+	 * All FTDI UART chips are limited to CS7/8. We won't pretend to
+	 * support CS5/6 and revert the CSIZE setting instead.
+	 */
+	if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
+		dev_warn(ddev, "requested CSIZE setting not supported\n");
+
+		termios->c_cflag &= ~CSIZE;
+		if (old_termios)
+			termios->c_cflag |= old_termios->c_cflag & CSIZE;
+		else
+			termios->c_cflag |= CS8;
+	}
+
 	cflag = termios->c_cflag;
 
 	if (!old_termios)
@@ -2167,19 +2181,16 @@ no_skip:
 	} else {
 		urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
 	}
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS7:
-			urb_value |= 7;
-			dev_dbg(ddev, "Setting CS7\n");
-			break;
-		case CS8:
-			urb_value |= 8;
-			dev_dbg(ddev, "Setting CS8\n");
-			break;
-		default:
-			dev_err(ddev, "CSIZE was set but not CS7-CS8\n");
-		}
+	switch (cflag & CSIZE) {
+	case CS7:
+		urb_value |= 7;
+		dev_dbg(ddev, "Setting CS7\n");
+		break;
+	default:
+	case CS8:
+		urb_value |= 8;
+		dev_dbg(ddev, "Setting CS8\n");
+		break;
 	}
 
 	/* This is needed by the break command since it uses the same command
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 8b3d0abe7e1..d06013033de 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1875,25 +1875,25 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	iflag = tty->termios.c_iflag;
 
 	/* Change the number of bits */
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			lData = LCR_BITS_5;
-			break;
+	switch (cflag & CSIZE) {
+	case CS5:
+		lData = LCR_BITS_5;
+		break;
 
-		case CS6:
-			lData = LCR_BITS_6;
-			break;
+	case CS6:
+		lData = LCR_BITS_6;
+		break;
 
-		case CS7:
-			lData = LCR_BITS_7;
-			break;
-		default:
-		case CS8:
-			lData = LCR_BITS_8;
-			break;
-		}
+	case CS7:
+		lData = LCR_BITS_7;
+		break;
+
+	default:
+	case CS8:
+		lData = LCR_BITS_8;
+		break;
 	}
+
 	/* Change the Parity bit */
 	if (cflag & PARENB) {
 		if (cflag & PARODD) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 048cd44d51b..5e39f5c4941 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -304,24 +304,22 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x\n", i,
 	    buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			buf[6] = 5;
-			break;
-		case CS6:
-			buf[6] = 6;
-			break;
-		case CS7:
-			buf[6] = 7;
-			break;
-		default:
-		case CS8:
-			buf[6] = 8;
-			break;
-		}
-		dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
+	switch (cflag & CSIZE) {
+	case CS5:
+		buf[6] = 5;
+		break;
+	case CS6:
+		buf[6] = 6;
+		break;
+	case CS7:
+		buf[6] = 7;
+		break;
+	default:
+	case CS8:
+		buf[6] = 8;
+		break;
 	}
+	dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
 
 	/* For reference buf[0]:buf[3] baud rate value */
 	/* NOTE: Only the values defined in baud_sup are supported !
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index ddf6c47137d..1694d4ff163 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -346,22 +346,20 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	}
 
 	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			buf[1] |= SET_UART_FORMAT_SIZE_5;
-			break;
-		case CS6:
-			buf[1] |= SET_UART_FORMAT_SIZE_6;
-			break;
-		case CS7:
-			buf[1] |= SET_UART_FORMAT_SIZE_7;
-			break;
-		default:
-		case CS8:
-			buf[1] |= SET_UART_FORMAT_SIZE_8;
-			break;
-		}
+	switch (cflag & CSIZE) {
+	case CS5:
+		buf[1] |= SET_UART_FORMAT_SIZE_5;
+		break;
+	case CS6:
+		buf[1] |= SET_UART_FORMAT_SIZE_6;
+		break;
+	case CS7:
+		buf[1] |= SET_UART_FORMAT_SIZE_7;
+		break;
+	default:
+	case CS8:
+		buf[1] |= SET_UART_FORMAT_SIZE_8;
+		break;
 	}
 
 	/* Set Stop bit2 : 0:1bit 1:2bit */