aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
authorDavid Howells <dhowells@redhat.com>2013-04-10 13:23:50 +0100
committerAl Viro <viro@zeniv.linux.org.uk>2013-04-29 15:41:53 -0400
commit77cd02c151cb6b7d81aad4802ee8b98a033863d6 (patch)
tree6b9c93bad1beff92f78a9f36bd3cff9fc7185aa9 /drivers/usb
parent96c7a22ebd2c919ed8fb93bb7c02b60aac099768 (diff)
fsl_udc: Don't use create_proc_read_entry()
Don't use create_proc_read_entry() as that is deprecated, but rather use proc_create_data() and seq_file instead. Signed-off-by: David Howells <dhowells@redhat.com> cc: Li Yang <leoli@freescale.com> cc: Felipe Balbi <balbi@ti.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-usb@vger.kernel.org cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/gadget/fsl_udc_core.c124
1 files changed, 43 insertions, 81 deletions
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 04d5fef1440..ede70ffe1ab 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -2038,47 +2038,37 @@ static int fsl_udc_stop(struct usb_gadget *g,
static const char proc_filename[] = "driver/fsl_usb2_udc";
-static int fsl_proc_read(char *page, char **start, off_t off, int count,
- int *eof, void *_dev)
+static int fsl_proc_read(struct seq_file *m, void *v)
{
- char *buf = page;
- char *next = buf;
- unsigned size = count;
unsigned long flags;
- int t, i;
+ int i;
u32 tmp_reg;
struct fsl_ep *ep = NULL;
struct fsl_req *req;
struct fsl_udc *udc = udc_controller;
- if (off != 0)
- return 0;
spin_lock_irqsave(&udc->lock, flags);
/* ------basic driver information ---- */
- t = scnprintf(next, size,
+ seq_printf(m,
DRIVER_DESC "\n"
"%s version: %s\n"
"Gadget driver: %s\n\n",
driver_name, DRIVER_VERSION,
udc->driver ? udc->driver->driver.name : "(none)");
- size -= t;
- next += t;
/* ------ DR Registers ----- */
tmp_reg = fsl_readl(&dr_regs->usbcmd);
- t = scnprintf(next, size,
+ seq_printf(m,
"USBCMD reg:\n"
"SetupTW: %d\n"
"Run/Stop: %s\n\n",
(tmp_reg & USB_CMD_SUTW) ? 1 : 0,
(tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop");
- size -= t;
- next += t;
tmp_reg = fsl_readl(&dr_regs->usbsts);
- t = scnprintf(next, size,
+ seq_printf(m,
"USB Status Reg:\n"
"Dr Suspend: %d Reset Received: %d System Error: %s "
"USB Error Interrupt: %s\n\n",
@@ -2086,11 +2076,9 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
(tmp_reg & USB_STS_RESET) ? 1 : 0,
(tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal",
(tmp_reg & USB_STS_ERR) ? "Err detected" : "No err");
- size -= t;
- next += t;
tmp_reg = fsl_readl(&dr_regs->usbintr);
- t = scnprintf(next, size,
+ seq_printf(m,
"USB Interrupt Enable Reg:\n"
"Sleep Enable: %d SOF Received Enable: %d "
"Reset Enable: %d\n"
@@ -2104,33 +2092,25 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
(tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0,
(tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0,
(tmp_reg & USB_INTR_INT_EN) ? 1 : 0);
- size -= t;
- next += t;
tmp_reg = fsl_readl(&dr_regs->frindex);
- t = scnprintf(next, size,
+ seq_printf(m,
"USB Frame Index Reg: Frame Number is 0x%x\n\n",
(tmp_reg & USB_FRINDEX_MASKS));
- size -= t;
- next += t;
tmp_reg = fsl_readl(&dr_regs->deviceaddr);
- t = scnprintf(next, size,
+ seq_printf(m,
"USB Device Address Reg: Device Addr is 0x%x\n\n",
(tmp_reg & USB_DEVICE_ADDRESS_MASK));
- size -= t;
- next += t;
tmp_reg = fsl_readl(&dr_regs->endpointlistaddr);
- t = scnprintf(next, size,
+ seq_printf(m,
"USB Endpoint List Address Reg: "
"Device Addr is 0x%x\n\n",
(tmp_reg & USB_EP_LIST_ADDRESS_MASK));
- size -= t;
- next += t;
tmp_reg = fsl_readl(&dr_regs->portsc1);
- t = scnprintf(next, size,
+ seq_printf(m,
"USB Port Status&Control Reg:\n"
"Port Transceiver Type : %s Port Speed: %s\n"
"PHY Low Power Suspend: %s Port Reset: %s "
@@ -2139,7 +2119,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
"Port Enable/Disable Change: %s\n"
"Port Enabled/Disabled: %s "
"Current Connect Status: %s\n\n", ( {
- char *s;
+ const char *s;
switch (tmp_reg & PORTSCX_PTS_FSLS) {
case PORTSCX_PTS_UTMI:
s = "UTMI"; break;
@@ -2165,13 +2145,11 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
"Not correct",
(tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ?
"Attached" : "Not-Att");
- size -= t;
- next += t;
tmp_reg = fsl_readl(&dr_regs->usbmode);
- t = scnprintf(next, size,
+ seq_printf(m,
"USB Mode Reg: Controller Mode is: %s\n\n", ( {
- char *s;
+ const char *s;
switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) {
case USB_MODE_CTRL_MODE_IDLE:
s = "Idle"; break;
@@ -2184,103 +2162,87 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
}
s;
} ));
- size -= t;
- next += t;
tmp_reg = fsl_readl(&dr_regs->endptsetupstat);
- t = scnprintf(next, size,
+ seq_printf(m,
"Endpoint Setup Status Reg: SETUP on ep 0x%x\n\n",
(tmp_reg & EP_SETUP_STATUS_MASK));
- size -= t;
- next += t;
for (i = 0; i < udc->max_ep / 2; i++) {
tmp_reg = fsl_readl(&dr_regs->endptctrl[i]);
- t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n",
- i, tmp_reg);
- size -= t;
- next += t;
+ seq_printf(m, "EP Ctrl Reg [0x%x]: = [0x%x]\n", i, tmp_reg);
}
tmp_reg = fsl_readl(&dr_regs->endpointprime);
- t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n\n", tmp_reg);
- size -= t;
- next += t;
+ seq_printf(m, "EP Prime Reg = [0x%x]\n\n", tmp_reg);
#ifndef CONFIG_ARCH_MXC
if (udc->pdata->have_sysif_regs) {
tmp_reg = usb_sys_regs->snoop1;
- t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
- size -= t;
- next += t;
+ seq_printf(m, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
tmp_reg = usb_sys_regs->control;
- t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n",
- tmp_reg);
- size -= t;
- next += t;
+ seq_printf(m, "General Control Reg : = [0x%x]\n\n", tmp_reg);
}
#endif
/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
ep = &udc->eps[0];
- t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n",
+ seq_printf(m, "For %s Maxpkt is 0x%x index is 0x%x\n",
ep->ep.name, ep_maxpacket(ep), ep_index(ep));
- size -= t;
- next += t;
if (list_empty(&ep->queue)) {
- t = scnprintf(next, size, "its req queue is empty\n\n");
- size -= t;
- next += t;
+ seq_puts(m, "its req queue is empty\n\n");
} else {
list_for_each_entry(req, &ep->queue, queue) {
- t = scnprintf(next, size,
+ seq_printf(m,
"req %p actual 0x%x length 0x%x buf %p\n",
&req->req, req->req.actual,
req->req.length, req->req.buf);
- size -= t;
- next += t;
}
}
/* other gadget->eplist ep */
list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
if (ep->ep.desc) {
- t = scnprintf(next, size,
+ seq_printf(m,
"\nFor %s Maxpkt is 0x%x "
"index is 0x%x\n",
ep->ep.name, ep_maxpacket(ep),
ep_index(ep));
- size -= t;
- next += t;
if (list_empty(&ep->queue)) {
- t = scnprintf(next, size,
- "its req queue is empty\n\n");
- size -= t;
- next += t;
+ seq_puts(m, "its req queue is empty\n\n");
} else {
list_for_each_entry(req, &ep->queue, queue) {
- t = scnprintf(next, size,
+ seq_printf(m,
"req %p actual 0x%x length "
"0x%x buf %p\n",
&req->req, req->req.actual,
req->req.length, req->req.buf);
- size -= t;
- next += t;
- } /* end for each_entry of ep req */
- } /* end for else */
- } /* end for if(ep->queue) */
- } /* end (ep->desc) */
+ } /* end for each_entry of ep req */
+ } /* end for else */
+ } /* end for if(ep->queue) */
+ } /* end (ep->desc) */
spin_unlock_irqrestore(&udc->lock, flags);
+ return 0;
+}
- *eof = 1;
- return count - size;
+/*
+ * seq_file wrappers for procfile show routines.
+ */
+static int fsl_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fsl_proc_read, NULL);
}
-#define create_proc_file() create_proc_read_entry(proc_filename, \
- 0, NULL, fsl_proc_read, NULL)
+static const struct file_operations fsl_proc_fops = {
+ .open = fsl_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+#define create_proc_file() proc_create(proc_filename, 0, NULL, &fsl_proc_fops)
#define remove_proc_file() remove_proc_entry(proc_filename, NULL)
#else /* !CONFIG_USB_GADGET_DEBUG_FILES */