OMAP2, 3: DSS2: RFBI: create platform_driver, move init, exit to driver

Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So a platform_driver for RFBI is created and init exit methods are moved from core.c
to its driver probe,remove. pdev member has to be maintained by its own drivers.

RFBI platform driver is registered from inside omap_dss_probe, in the order desired.

Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

1 files changed, 66 insertions, 44 deletions

diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 10a2ffe0288..153f963e8e8 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -100,6 +100,7 @@ static int rfbi_convert_timings(struct rfbi_timings *t);
 static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
 
 static struct {
+	struct platform_device *pdev;
 	void __iomem	*base;
 
 	unsigned long	l4_khz;
@@ -957,50 +958,6 @@ void rfbi_dump_regs(struct seq_file *s)
 #undef DUMPREG
 }
 
-int rfbi_init(void)
-{
-	u32 rev;
-	u32 l;
-
-	spin_lock_init(&rfbi.cmd_lock);
-
-	init_completion(&rfbi.cmd_done);
-	atomic_set(&rfbi.cmd_fifo_full, 0);
-	atomic_set(&rfbi.cmd_pending, 0);
-
-	rfbi.base = ioremap(RFBI_BASE, SZ_256);
-	if (!rfbi.base) {
-		DSSERR("can't ioremap RFBI\n");
-		return -ENOMEM;
-	}
-
-	rfbi_enable_clocks(1);
-
-	msleep(10);
-
-	rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
-
-	/* Enable autoidle and smart-idle */
-	l = rfbi_read_reg(RFBI_SYSCONFIG);
-	l |= (1 << 0) | (2 << 3);
-	rfbi_write_reg(RFBI_SYSCONFIG, l);
-
-	rev = rfbi_read_reg(RFBI_REVISION);
-	printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
-	       FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
-
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-void rfbi_exit(void)
-{
-	DSSDBG("rfbi_exit\n");
-
-	iounmap(rfbi.base);
-}
-
 int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 {
 	int r;
@@ -1056,3 +1013,68 @@ int rfbi_init_display(struct omap_dss_device *dssdev)
 	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
 	return 0;
 }
+
+/* RFBI HW IP initialisation */
+static int omap_rfbihw_probe(struct platform_device *pdev)
+{
+	u32 rev;
+	u32 l;
+
+	rfbi.pdev = pdev;
+
+	spin_lock_init(&rfbi.cmd_lock);
+
+	init_completion(&rfbi.cmd_done);
+	atomic_set(&rfbi.cmd_fifo_full, 0);
+	atomic_set(&rfbi.cmd_pending, 0);
+
+	rfbi.base = ioremap(RFBI_BASE, SZ_256);
+	if (!rfbi.base) {
+		DSSERR("can't ioremap RFBI\n");
+		return -ENOMEM;
+	}
+
+	rfbi_enable_clocks(1);
+
+	msleep(10);
+
+	rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
+
+	/* Enable autoidle and smart-idle */
+	l = rfbi_read_reg(RFBI_SYSCONFIG);
+	l |= (1 << 0) | (2 << 3);
+	rfbi_write_reg(RFBI_SYSCONFIG, l);
+
+	rev = rfbi_read_reg(RFBI_REVISION);
+	printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
+	       FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+
+static int omap_rfbihw_remove(struct platform_device *pdev)
+{
+	iounmap(rfbi.base);
+	return 0;
+}
+
+static struct platform_driver omap_rfbihw_driver = {
+	.probe          = omap_rfbihw_probe,
+	.remove         = omap_rfbihw_remove,
+	.driver         = {
+		.name   = "omapdss_rfbi",
+		.owner  = THIS_MODULE,
+	},
+};
+
+int rfbi_init_platform_driver(void)
+{
+	return platform_driver_register(&omap_rfbihw_driver);
+}
+
+void rfbi_uninit_platform_driver(void)
+{
+	return platform_driver_unregister(&omap_rfbihw_driver);
+}