aboutsummaryrefslogtreecommitdiff
path: root/drivers/xen/xen-pciback/conf_space.c
diff options
context:
space:
mode:
authorKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>2009-10-13 17:22:20 -0400
committerKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>2011-07-19 20:58:01 -0400
commit30edc14bf39afde24ef7db2de66c91805db80828 (patch)
tree1cf5b6f28a3ea4159a09bcef9d11be6d427e3558 /drivers/xen/xen-pciback/conf_space.c
parent56299378726d5f2ba8d3c8cbbd13cb280ba45e4f (diff)
xen/pciback: xen pci backend driver.
This is the host side counterpart to the frontend driver in drivers/pci/xen-pcifront.c. The PV protocol is also implemented by frontend drivers in other OSes too, such as the BSDs. The PV protocol is rather simple. There is page shared with the guest, which has the 'struct xen_pci_sharedinfo' embossed in it. The backend has a thread that is kicked every-time the structure is changed and based on the operation field it performs specific tasks: XEN_PCI_OP_conf_[read|write]: Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c) Based on which field is probed, we either enable/disable the PCI device, change power state, read VPD, etc. The major goal of this call is to provide a Physical IRQ (PIRQ) to the guest. The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ is tied in to the IO-APIC, or is a vector. For GSI type interrupts, the PIRQ==GSI holds. For MSI/MSI-X the PIRQ value != Linux IRQ number (thought PIRQ==vector). Please note, that with Xen, all interrupts (except those level shared ones) are injected directly to the guest - there is no host interaction. XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c) Enables/disables the MSI/MSI-X capability of the device. These operations setup the MSI/MSI-X vectors for the guest and pass them to the frontend. When the device is activated, the interrupts are directly injected in the guest without involving the host. XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure, perform the appropriate AER commands on the guest. Right now that is a cop-out - we just kill the guest. Besides implementing those commands, it can also - hide a PCI device from the host. When booting up, the user can specify xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the device. The driver was lifted from linux-2.6.18.hg tree and fixed up so that it could compile under v3.0. Per suggestion from Jesse Barnes moved the driver to drivers/xen/xen-pciback. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Diffstat (limited to 'drivers/xen/xen-pciback/conf_space.c')
-rw-r--r--drivers/xen/xen-pciback/conf_space.c435
1 files changed, 435 insertions, 0 deletions
diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
new file mode 100644
index 00000000000..370c18e58d7
--- /dev/null
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -0,0 +1,435 @@
+/*
+ * PCI Backend - Functions for creating a virtual configuration space for
+ * exported PCI Devices.
+ * It's dangerous to allow PCI Driver Domains to change their
+ * device's resources (memory, i/o ports, interrupts). We need to
+ * restrict changes to certain PCI Configuration registers:
+ * BARs, INTERRUPT_PIN, most registers in the header...
+ *
+ * Author: Ryan Wilson <hap9@epoch.ncsc.mil>
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include "pciback.h"
+#include "conf_space.h"
+#include "conf_space_quirks.h"
+
+static int permissive;
+module_param(permissive, bool, 0644);
+
+#define DEFINE_PCI_CONFIG(op, size, type) \
+int pciback_##op##_config_##size \
+(struct pci_dev *dev, int offset, type value, void *data) \
+{ \
+ return pci_##op##_config_##size(dev, offset, value); \
+}
+
+DEFINE_PCI_CONFIG(read, byte, u8 *)
+DEFINE_PCI_CONFIG(read, word, u16 *)
+DEFINE_PCI_CONFIG(read, dword, u32 *)
+
+DEFINE_PCI_CONFIG(write, byte, u8)
+DEFINE_PCI_CONFIG(write, word, u16)
+DEFINE_PCI_CONFIG(write, dword, u32)
+
+static int conf_space_read(struct pci_dev *dev,
+ const struct config_field_entry *entry,
+ int offset, u32 *value)
+{
+ int ret = 0;
+ const struct config_field *field = entry->field;
+
+ *value = 0;
+
+ switch (field->size) {
+ case 1:
+ if (field->u.b.read)
+ ret = field->u.b.read(dev, offset, (u8 *) value,
+ entry->data);
+ break;
+ case 2:
+ if (field->u.w.read)
+ ret = field->u.w.read(dev, offset, (u16 *) value,
+ entry->data);
+ break;
+ case 4:
+ if (field->u.dw.read)
+ ret = field->u.dw.read(dev, offset, value, entry->data);
+ break;
+ }
+ return ret;
+}
+
+static int conf_space_write(struct pci_dev *dev,
+ const struct config_field_entry *entry,
+ int offset, u32 value)
+{
+ int ret = 0;
+ const struct config_field *field = entry->field;
+
+ switch (field->size) {
+ case 1:
+ if (field->u.b.write)
+ ret = field->u.b.write(dev, offset, (u8) value,
+ entry->data);
+ break;
+ case 2:
+ if (field->u.w.write)
+ ret = field->u.w.write(dev, offset, (u16) value,
+ entry->data);
+ break;
+ case 4:
+ if (field->u.dw.write)
+ ret = field->u.dw.write(dev, offset, value,
+ entry->data);
+ break;
+ }
+ return ret;
+}
+
+static inline u32 get_mask(int size)
+{
+ if (size == 1)
+ return 0xff;
+ else if (size == 2)
+ return 0xffff;
+ else
+ return 0xffffffff;
+}
+
+static inline int valid_request(int offset, int size)
+{
+ /* Validate request (no un-aligned requests) */
+ if ((size == 1 || size == 2 || size == 4) && (offset % size) == 0)
+ return 1;
+ return 0;
+}
+
+static inline u32 merge_value(u32 val, u32 new_val, u32 new_val_mask,
+ int offset)
+{
+ if (offset >= 0) {
+ new_val_mask <<= (offset * 8);
+ new_val <<= (offset * 8);
+ } else {
+ new_val_mask >>= (offset * -8);
+ new_val >>= (offset * -8);
+ }
+ val = (val & ~new_val_mask) | (new_val & new_val_mask);
+
+ return val;
+}
+
+static int pcibios_err_to_errno(int err)
+{
+ switch (err) {
+ case PCIBIOS_SUCCESSFUL:
+ return XEN_PCI_ERR_success;
+ case PCIBIOS_DEVICE_NOT_FOUND:
+ return XEN_PCI_ERR_dev_not_found;
+ case PCIBIOS_BAD_REGISTER_NUMBER:
+ return XEN_PCI_ERR_invalid_offset;
+ case PCIBIOS_FUNC_NOT_SUPPORTED:
+ return XEN_PCI_ERR_not_implemented;
+ case PCIBIOS_SET_FAILED:
+ return XEN_PCI_ERR_access_denied;
+ }
+ return err;
+}
+
+int pciback_config_read(struct pci_dev *dev, int offset, int size,
+ u32 *ret_val)
+{
+ int err = 0;
+ struct pciback_dev_data *dev_data = pci_get_drvdata(dev);
+ const struct config_field_entry *cfg_entry;
+ const struct config_field *field;
+ int req_start, req_end, field_start, field_end;
+ /* if read fails for any reason, return 0
+ * (as if device didn't respond) */
+ u32 value = 0, tmp_val;
+
+ if (unlikely(verbose_request))
+ printk(KERN_DEBUG "pciback: %s: read %d bytes at 0x%x\n",
+ pci_name(dev), size, offset);
+
+ if (!valid_request(offset, size)) {
+ err = XEN_PCI_ERR_invalid_offset;
+ goto out;
+ }
+
+ /* Get the real value first, then modify as appropriate */
+ switch (size) {
+ case 1:
+ err = pci_read_config_byte(dev, offset, (u8 *) &value);
+ break;
+ case 2:
+ err = pci_read_config_word(dev, offset, (u16 *) &value);
+ break;
+ case 4:
+ err = pci_read_config_dword(dev, offset, &value);
+ break;
+ }
+
+ list_for_each_entry(cfg_entry, &dev_data->config_fields, list) {
+ field = cfg_entry->field;
+
+ req_start = offset;
+ req_end = offset + size;
+ field_start = OFFSET(cfg_entry);
+ field_end = OFFSET(cfg_entry) + field->size;
+
+ if ((req_start >= field_start && req_start < field_end)
+ || (req_end > field_start && req_end <= field_end)) {
+ err = conf_space_read(dev, cfg_entry, field_start,
+ &tmp_val);
+ if (err)
+ goto out;
+
+ value = merge_value(value, tmp_val,
+ get_mask(field->size),
+ field_start - req_start);
+ }
+ }
+
+out:
+ if (unlikely(verbose_request))
+ printk(KERN_DEBUG "pciback: %s: read %d bytes at 0x%x = %x\n",
+ pci_name(dev), size, offset, value);
+
+ *ret_val = value;
+ return pcibios_err_to_errno(err);
+}
+
+int pciback_config_write(struct pci_dev *dev, int offset, int size, u32 value)
+{
+ int err = 0, handled = 0;
+ struct pciback_dev_data *dev_data = pci_get_drvdata(dev);
+ const struct config_field_entry *cfg_entry;
+ const struct config_field *field;
+ u32 tmp_val;
+ int req_start, req_end, field_start, field_end;
+
+ if (unlikely(verbose_request))
+ printk(KERN_DEBUG
+ "pciback: %s: write request %d bytes at 0x%x = %x\n",
+ pci_name(dev), size, offset, value);
+
+ if (!valid_request(offset, size))
+ return XEN_PCI_ERR_invalid_offset;
+
+ list_for_each_entry(cfg_entry, &dev_data->config_fields, list) {
+ field = cfg_entry->field;
+
+ req_start = offset;
+ req_end = offset + size;
+ field_start = OFFSET(cfg_entry);
+ field_end = OFFSET(cfg_entry) + field->size;
+
+ if ((req_start >= field_start && req_start < field_end)
+ || (req_end > field_start && req_end <= field_end)) {
+ tmp_val = 0;
+
+ err = pciback_config_read(dev, field_start,
+ field->size, &tmp_val);
+ if (err)
+ break;
+
+ tmp_val = merge_value(tmp_val, value, get_mask(size),
+ req_start - field_start);
+
+ err = conf_space_write(dev, cfg_entry, field_start,
+ tmp_val);
+
+ /* handled is set true here, but not every byte
+ * may have been written! Properly detecting if
+ * every byte is handled is unnecessary as the
+ * flag is used to detect devices that need
+ * special helpers to work correctly.
+ */
+ handled = 1;
+ }
+ }
+
+ if (!handled && !err) {
+ /* By default, anything not specificially handled above is
+ * read-only. The permissive flag changes this behavior so
+ * that anything not specifically handled above is writable.
+ * This means that some fields may still be read-only because
+ * they have entries in the config_field list that intercept
+ * the write and do nothing. */
+ if (dev_data->permissive || permissive) {
+ switch (size) {
+ case 1:
+ err = pci_write_config_byte(dev, offset,
+ (u8) value);
+ break;
+ case 2:
+ err = pci_write_config_word(dev, offset,
+ (u16) value);
+ break;
+ case 4:
+ err = pci_write_config_dword(dev, offset,
+ (u32) value);
+ break;
+ }
+ } else if (!dev_data->warned_on_write) {
+ dev_data->warned_on_write = 1;
+ dev_warn(&dev->dev, "Driver tried to write to a "
+ "read-only configuration space field at offset"
+ " 0x%x, size %d. This may be harmless, but if "
+ "you have problems with your device:\n"
+ "1) see permissive attribute in sysfs\n"
+ "2) report problems to the xen-devel "
+ "mailing list along with details of your "
+ "device obtained from lspci.\n", offset, size);
+ }
+ }
+
+ return pcibios_err_to_errno(err);
+}
+
+void pciback_config_free_dyn_fields(struct pci_dev *dev)
+{
+ struct pciback_dev_data *dev_data = pci_get_drvdata(dev);
+ struct config_field_entry *cfg_entry, *t;
+ const struct config_field *field;
+
+ dev_dbg(&dev->dev, "free-ing dynamically allocated virtual "
+ "configuration space fields\n");
+ if (!dev_data)
+ return;
+
+ list_for_each_entry_safe(cfg_entry, t, &dev_data->config_fields, list) {
+ field = cfg_entry->field;
+
+ if (field->clean) {
+ field->clean((struct config_field *)field);
+
+ kfree(cfg_entry->data);
+
+ list_del(&cfg_entry->list);
+ kfree(cfg_entry);
+ }
+
+ }
+}
+
+void pciback_config_reset_dev(struct pci_dev *dev)
+{
+ struct pciback_dev_data *dev_data = pci_get_drvdata(dev);
+ const struct config_field_entry *cfg_entry;
+ const struct config_field *field;
+
+ dev_dbg(&dev->dev, "resetting virtual configuration space\n");
+ if (!dev_data)
+ return;
+
+ list_for_each_entry(cfg_entry, &dev_data->config_fields, list) {
+ field = cfg_entry->field;
+
+ if (field->reset)
+ field->reset(dev, OFFSET(cfg_entry), cfg_entry->data);
+ }
+}
+
+void pciback_config_free_dev(struct pci_dev *dev)
+{
+ struct pciback_dev_data *dev_data = pci_get_drvdata(dev);
+ struct config_field_entry *cfg_entry, *t;
+ const struct config_field *field;
+
+ dev_dbg(&dev->dev, "free-ing virtual configuration space fields\n");
+ if (!dev_data)
+ return;
+
+ list_for_each_entry_safe(cfg_entry, t, &dev_data->config_fields, list) {
+ list_del(&cfg_entry->list);
+
+ field = cfg_entry->field;
+
+ if (field->release)
+ field->release(dev, OFFSET(cfg_entry), cfg_entry->data);
+
+ kfree(cfg_entry);
+ }
+}
+
+int pciback_config_add_field_offset(struct pci_dev *dev,
+ const struct config_field *field,
+ unsigned int base_offset)
+{
+ int err = 0;
+ struct pciback_dev_data *dev_data = pci_get_drvdata(dev);
+ struct config_field_entry *cfg_entry;
+ void *tmp;
+
+ cfg_entry = kmalloc(sizeof(*cfg_entry), GFP_KERNEL);
+ if (!cfg_entry) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ cfg_entry->data = NULL;
+ cfg_entry->field = field;
+ cfg_entry->base_offset = base_offset;
+
+ /* silently ignore duplicate fields */
+ err = pciback_field_is_dup(dev, OFFSET(cfg_entry));
+ if (err)
+ goto out;
+
+ if (field->init) {
+ tmp = field->init(dev, OFFSET(cfg_entry));
+
+ if (IS_ERR(tmp)) {
+ err = PTR_ERR(tmp);
+ goto out;
+ }
+
+ cfg_entry->data = tmp;
+ }
+
+ dev_dbg(&dev->dev, "added config field at offset 0x%02x\n",
+ OFFSET(cfg_entry));
+ list_add_tail(&cfg_entry->list, &dev_data->config_fields);
+
+out:
+ if (err)
+ kfree(cfg_entry);
+
+ return err;
+}
+
+/* This sets up the device's virtual configuration space to keep track of
+ * certain registers (like the base address registers (BARs) so that we can
+ * keep the client from manipulating them directly.
+ */
+int pciback_config_init_dev(struct pci_dev *dev)
+{
+ int err = 0;
+ struct pciback_dev_data *dev_data = pci_get_drvdata(dev);
+
+ dev_dbg(&dev->dev, "initializing virtual configuration space\n");
+
+ INIT_LIST_HEAD(&dev_data->config_fields);
+
+ err = pciback_config_header_add_fields(dev);
+ if (err)
+ goto out;
+
+ err = pciback_config_capability_add_fields(dev);
+ if (err)
+ goto out;
+
+ err = pciback_config_quirks_init(dev);
+
+out:
+ return err;
+}
+
+int pciback_config_init(void)
+{
+ return pciback_config_capability_init();
+}