Merge tag 'drm-intel-next-2013-04-06' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
Since I expect Linus to open the merge window in about a week I guess this
is the last i915 feature pull for 3.10. Highlights:
Updated testing tree for -next. Highlights:
- Corner case fixes discovered with static analyzers (Damien).
- More fixes to combat unclaimed register errors on Haswell (Paulo).
- Some small fixes to the gpu turbo code (Rodrigo+Ben), Ben has more
  fixes for overclocking support pending.
- More prep work for fastboot from Chris.
- VT-switchless suspend/resume from Jesse.
- The prep work of Egbert Eich's hpd irq storm handling. Hopefully we can
  squeeze in the actual storm handling code for 3.10 ...
- More convenience helpers for Imre's sg iterator. Core parts acked by
  Andrew Morton.
- A bit of backlight code cleanup from Jani.
- Fixed ilk gpu reset (Jesse).
- Reduced color range handling fixes for VLV (Ville).

The big item here is though the introduction of pipe_config to properly
pre-compute the desired modeset state before touching the hw. Together
with some very basic support to read out the current config from the hw
and compare the state with the sw tracking. This is all prep work for more
reliable fastboot, atomic modesets and other cool features. Stuff
converted to the new world includes:
- Most simple pipe attributes (reduce color range, pixel multiplier).
- Pipe bpp/dither handling.
- Some convenience flags like ->has_pch_encoder to simplify the code flow.
- (Almost) DP clock handling, had to be reverted since part of a prep
  patch was lost in rebasing ...
Expect a lot of patches for this throughout 3.11, there's tons of work
till we have all state properly tracked for fastbooting to woExpect a lot
of patches for this throughout 3.11, there's tons of work till we have all
state properly tracked for fastbooting to work.

For 3.10 I have a bunch of fixes queued up and I plan to send them all out
at the end of this week. I need to shuffle patches in my -next queue a bit
so that we don't but feature-y stuff in there, too. The main thing I'd
like to sneak in is Egbert's hpd irq storm handling, which should be
pretty low-risk since all the infrastructure work has landed already. I
also have the oops fix pending, but that only mustered review before the
w/e and giving how hairy that part of our modeset code is, I want to give
it some more testing before forwarding.

Note: annarchy.fd.o seems to run out of disk space, so couldn't push the
usual for-airlied branch. Tag should work though.

Note 2: I've had to do a backmerge since conflicts grew too ugly, but the
upstream -rc I've backmerged is already in your drm-next.

* tag 'drm-intel-next-2013-04-06' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits)
  drm/i915: info level for simulated gpu hang dmesg notice
  drm/i915: revert eDP bpp clamping code changes
  Revert "drm/i915: fix DP get_hw_state return value"
  drm/i915: Don't use the HDMI port color range bit on Valleyview
  drm/i915: Set PIPECONF color range bit on Valleyview
  drm/i915: extract i9xx_set_pipeconf
  drm/i915: Add no-lvds quirk for Fujitsu Esprimo Q900
  drm/i915: create pipe_config->dpll for clock state
  drm/i915: hw readout support for ->has_pch_encoders
  drm/i915: add hw state readout/checking for pipe_config
  drm/i915: rip out superflous is_dp&is_cpu_edp tracking
  drm/i915: remove leaky eDP functions
  drm/i915: track dp target_clock in pipe_config
  drm/i915: move dp_m_n computation to dp_encoder->compute_config
  drm/i915: clear up the fdi/dp set_m_n confusion
  drm/i915: Fix sdvo connector get_hw_state function
  drm/i915: drop DPFLIPSTAT enables on VLV v3
  drm/i915: add Punit read/write routines for VLV v2
  drm/i915: panel power sequencing for VLV eDP v2
  drm/i915/dp: fix up VLV DP handling v2
  ...

25 files changed, 1820 insertions, 1078 deletions

diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c
index bc8edbeca3f..bb8f5801218 100644
--- a/drivers/gpu/drm/drm_cache.c
+++ b/drivers/gpu/drm/drm_cache.c
@@ -109,7 +109,7 @@ drm_clflush_sg(struct sg_table *st)
 
 		mb();
 		for_each_sg_page(st->sgl, &sg_iter, st->nents, 0)
-			drm_clflush_page(sg_iter.page);
+			drm_clflush_page(sg_page_iter_page(&sg_iter));
 		mb();
 
 		return;
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 59d6b9bf204..6764dce44e8 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -1398,7 +1398,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper)
 	struct drm_mode_set *modeset;
 	bool *enabled;
 	int width, height;
-	int i, ret;
+	int i;
 
 	DRM_DEBUG_KMS("\n");
 
@@ -1419,16 +1419,23 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper)
 
 	drm_enable_connectors(fb_helper, enabled);
 
-	ret = drm_target_cloned(fb_helper, modes, enabled, width, height);
-	if (!ret) {
-		ret = drm_target_preferred(fb_helper, modes, enabled, width, height);
-		if (!ret)
+	if (!(fb_helper->funcs->initial_config &&
+	      fb_helper->funcs->initial_config(fb_helper, crtcs, modes,
+					       enabled, width, height))) {
+		memset(modes, 0, dev->mode_config.num_connector*sizeof(modes[0]));
+		memset(crtcs, 0, dev->mode_config.num_connector*sizeof(crtcs[0]));
+
+		if (!drm_target_cloned(fb_helper,
+				       modes, enabled, width, height) &&
+		    !drm_target_preferred(fb_helper,
+					  modes, enabled, width, height))
 			DRM_ERROR("Unable to find initial modes\n");
-	}
 
-	DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n", width, height);
+		DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
+			      width, height);
 
-	drm_pick_crtcs(fb_helper, crtcs, modes, 0, width, height);
+		drm_pick_crtcs(fb_helper, crtcs, modes, 0, width, height);
+	}
 
 	/* need to set the modesets up here for use later */
 	/* fill out the connector<->crtc mappings into the modesets */
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index ebcfe2e9497..4be58e3b8e4 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1630,6 +1630,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	mutex_init(&dev_priv->rps.hw_lock);
 	mutex_init(&dev_priv->modeset_restore_lock);
 
+	dev_priv->num_plane = 1;
+	if (IS_VALLEYVIEW(dev))
+		dev_priv->num_plane = 2;
+
 	ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes);
 	if (ret)
 		goto out_gem_unload;
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 0614aff23e7..3b4b9c09a20 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -463,6 +463,7 @@ bool i915_semaphore_is_enabled(struct drm_device *dev)
 static int i915_drm_freeze(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
 
 	/* ignore lid events during suspend */
 	mutex_lock(&dev_priv->modeset_restore_lock);
@@ -486,10 +487,14 @@ static int i915_drm_freeze(struct drm_device *dev)
 
 		cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
 
-		intel_modeset_disable(dev);
-
 		drm_irq_uninstall(dev);
 		dev_priv->enable_hotplug_processing = false;
+		/*
+		 * Disable CRTCs directly since we want to preserve sw state
+		 * for _thaw.
+		 */
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+			dev_priv->display.crtc_disable(crtc);
 	}
 
 	i915_save_state(dev);
@@ -545,6 +550,24 @@ void intel_console_resume(struct work_struct *work)
 	console_unlock();
 }
 
+static void intel_resume_hotplug(struct drm_device *dev)
+{
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+
+	mutex_lock(&mode_config->mutex);
+	DRM_DEBUG_KMS("running encoder hotplug functions\n");
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+		if (encoder->hot_plug)
+			encoder->hot_plug(encoder);
+
+	mutex_unlock(&mode_config->mutex);
+
+	/* Just fire off a uevent and let userspace tell us what to do */
+	drm_helper_hpd_irq_event(dev);
+}
+
 static int __i915_drm_thaw(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -567,7 +590,10 @@ static int __i915_drm_thaw(struct drm_device *dev)
 		drm_irq_install(dev);
 
 		intel_modeset_init_hw(dev);
-		intel_modeset_setup_hw_state(dev, false);
+
+		drm_modeset_lock_all(dev);
+		intel_modeset_setup_hw_state(dev, true);
+		drm_modeset_unlock_all(dev);
 
 		/*
 		 * ... but also need to make sure that hotplug processing
@@ -577,6 +603,8 @@ static int __i915_drm_thaw(struct drm_device *dev)
 		 * */
 		intel_hpd_init(dev);
 		dev_priv->enable_hotplug_processing = true;
+		/* Config may have changed between suspend and resume */
+		intel_resume_hotplug(dev);
 	}
 
 	intel_opregion_init(dev);
@@ -721,6 +749,7 @@ static int ironlake_do_reset(struct drm_device *dev)
 	int ret;
 
 	gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
+	gdrst &= ~GRDOM_MASK;
 	I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
 		   gdrst | GRDOM_RENDER | GRDOM_RESET_ENABLE);
 	ret = wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
@@ -729,6 +758,7 @@ static int ironlake_do_reset(struct drm_device *dev)
 
 	/* We can't reset render&media without also resetting display ... */
 	gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
+	gdrst &= ~GRDOM_MASK;
 	I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
 		   gdrst | GRDOM_MEDIA | GRDOM_RESET_ENABLE);
 	return wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
@@ -792,7 +822,7 @@ int intel_gpu_reset(struct drm_device *dev)
 
 	/* Also reset the gpu hangman. */
 	if (dev_priv->gpu_error.stop_rings) {
-		DRM_DEBUG("Simulated gpu hang, resetting stop_rings\n");
+		DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
 		dev_priv->gpu_error.stop_rings = 0;
 		if (ret == -ENODEV) {
 			DRM_ERROR("Reset not implemented, but ignoring "
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 625cccf5a4d..44fca0b6947 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -86,6 +86,19 @@ enum port {
 };
 #define port_name(p) ((p) + 'A')
 
+enum hpd_pin {
+	HPD_NONE = 0,
+	HPD_PORT_A = HPD_NONE, /* PORT_A is internal */
+	HPD_TV = HPD_NONE,     /* TV is known to be unreliable */
+	HPD_CRT,
+	HPD_SDVO_B,
+	HPD_SDVO_C,
+	HPD_PORT_B,
+	HPD_PORT_C,
+	HPD_PORT_D,
+	HPD_NUM_PINS
+};
+
 #define I915_GEM_GPU_DOMAINS \
 	(I915_GEM_DOMAIN_RENDER | \
 	 I915_GEM_DOMAIN_SAMPLER | \
@@ -271,6 +284,9 @@ struct drm_i915_error_state {
 	struct intel_display_error_state *display;
 };
 
+struct intel_crtc_config;
+struct intel_crtc;
+
 struct drm_i915_display_funcs {
 	bool (*fbc_enabled)(struct drm_device *dev);
 	void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
@@ -283,9 +299,11 @@ struct drm_i915_display_funcs {
 	void (*update_linetime_wm)(struct drm_device *dev, int pipe,
 				 struct drm_display_mode *mode);
 	void (*modeset_global_resources)(struct drm_device *dev);
+	/* Returns the active state of the crtc, and if the crtc is active,
+	 * fills out the pipe-config with the hw state. */
+	bool (*get_pipe_config)(struct intel_crtc *,
+				struct intel_crtc_config *);
 	int (*crtc_mode_set)(struct drm_crtc *crtc,
-			     struct drm_display_mode *mode,
-			     struct drm_display_mode *adjusted_mode,
 			     int x, int y,
 			     struct drm_framebuffer *old_fb);
 	void (*crtc_enable)(struct drm_crtc *crtc);
@@ -909,11 +927,11 @@ typedef struct drm_i915_private {
 	u32 irq_mask;
 	u32 gt_irq_mask;
 
-	u32 hotplug_supported_mask;
 	struct work_struct hotplug_work;
 	bool enable_hotplug_processing;
 
 	int num_pch_pll;
+	int num_plane;
 
 	unsigned long cfb_size;
 	unsigned int cfb_fb;
@@ -927,9 +945,14 @@ typedef struct drm_i915_private {
 	struct intel_overlay *overlay;
 	unsigned int sprite_scaling_enabled;
 
+	/* backlight */
+	struct {
+		int level;
+		bool enabled;
+		struct backlight_device *device;
+	} backlight;
+
 	/* LVDS info */
-	int backlight_level;  /* restore backlight to this value */
-	bool backlight_enabled;
 	struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
 	struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
 
@@ -1031,8 +1054,6 @@ typedef struct drm_i915_private {
 	 */
 	struct work_struct console_resume_work;
 
-	struct backlight_device *backlight;
-
 	struct drm_property *broadcast_rgb_property;
 	struct drm_property *force_audio_property;
 
@@ -1532,7 +1553,7 @@ static inline struct page *i915_gem_object_get_page(struct drm_i915_gem_object *
 	struct sg_page_iter sg_iter;
 
 	for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, n)
-		return sg_iter.page;
+		return sg_page_iter_page(&sg_iter);
 
 	return NULL;
 }
@@ -1713,6 +1734,11 @@ void i915_gem_stolen_cleanup_compression(struct drm_device *dev);
 void i915_gem_cleanup_stolen(struct drm_device *dev);
 struct drm_i915_gem_object *
 i915_gem_object_create_stolen(struct drm_device *dev, u32 size);
+struct drm_i915_gem_object *
+i915_gem_object_create_stolen_for_preallocated(struct drm_device *dev,
+					       u32 stolen_offset,
+					       u32 gtt_offset,
+					       u32 size);
 void i915_gem_object_release_stolen(struct drm_i915_gem_object *obj);
 
 /* i915_gem_tiling.c */
@@ -1843,6 +1869,8 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
 
 int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val);
 int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val);
+int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val);
+int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val);
 
 #define __i915_read(x, y) \
 	u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 8a2cbee491a..911bd40ef51 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -442,7 +442,7 @@ i915_gem_shmem_pread(struct drm_device *dev,
 
 	for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents,
 			 offset >> PAGE_SHIFT) {
-		struct page *page = sg_iter.page;
+		struct page *page = sg_page_iter_page(&sg_iter);
 
 		if (remain <= 0)
 			break;
@@ -765,7 +765,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev,
 
 	for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents,
 			 offset >> PAGE_SHIFT) {
-		struct page *page = sg_iter.page;
+		struct page *page = sg_page_iter_page(&sg_iter);
 		int partial_cacheline_write;
 
 		if (remain <= 0)
@@ -1647,7 +1647,7 @@ i915_gem_object_put_pages_gtt(struct drm_i915_gem_object *obj)
 		obj->dirty = 0;
 
 	for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) {
-		struct page *page = sg_iter.page;
+		struct page *page = sg_page_iter_page(&sg_iter);
 
 		if (obj->dirty)
 			set_page_dirty(page);
@@ -1827,7 +1827,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj)
 err_pages:
 	sg_mark_end(sg);
 	for_each_sg_page(st->sgl, &sg_iter, st->nents, 0)
-		page_cache_release(sg_iter.page);
+		page_cache_release(sg_page_iter_page(&sg_iter));
 	sg_free_table(st);
 	kfree(st);
 	return PTR_ERR(page);
@@ -2128,11 +2128,11 @@ static void i915_gem_reset_fences(struct drm_device *dev)
 	for (i = 0; i < dev_priv->num_fence_regs; i++) {
 		struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i];
 
-		i915_gem_write_fence(dev, i, NULL);
-
 		if (reg->obj)
 			i915_gem_object_fence_lost(reg->obj);
 
+		i915_gem_write_fence(dev, i, NULL);
+
 		reg->pin_count = 0;
 		reg->obj = NULL;
 		INIT_LIST_HEAD(&reg->lru_list);
@@ -2722,6 +2722,7 @@ int
 i915_gem_object_put_fence(struct drm_i915_gem_object *obj)
 {
 	struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+	struct drm_i915_fence_reg *fence;
 	int ret;
 
 	ret = i915_gem_object_wait_fence(obj);
@@ -2731,10 +2732,10 @@ i915_gem_object_put_fence(struct drm_i915_gem_object *obj)
 	if (obj->fence_reg == I915_FENCE_REG_NONE)
 		return 0;
 
-	i915_gem_object_update_fence(obj,
-				     &dev_priv->fence_regs[obj->fence_reg],
-				     false);
+	fence = &dev_priv->fence_regs[obj->fence_reg];
+
 	i915_gem_object_fence_lost(obj);
+	i915_gem_object_update_fence(obj, fence, false);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
index 898615d2d5e..c6dfc1466e3 100644
--- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c
+++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
@@ -130,7 +130,7 @@ static void *i915_gem_dmabuf_vmap(struct dma_buf *dma_buf)
 
 	i = 0;
 	for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0);
-		pages[i++] = sg_iter.page;
+		pages[i++] = sg_page_iter_page(&sg_iter);
 
 	obj->dma_buf_vmapping = vmap(pages, i, 0, PAGE_KERNEL);
 	drm_free_large(pages);
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 4cbae7bbb83..24a23b31b55 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -123,8 +123,7 @@ static void gen6_ppgtt_insert_entries(struct i915_hw_ppgtt *ppgtt,
 	for_each_sg_page(pages->sgl, &sg_iter, pages->nents, 0) {
 		dma_addr_t page_addr;
 
-		page_addr = sg_dma_address(sg_iter.sg) +
-				(sg_iter.sg_pgoffset << PAGE_SHIFT);
+		page_addr = sg_page_iter_dma_address(&sg_iter);
 		pt_vaddr[act_pte] = gen6_pte_encode(ppgtt->dev, page_addr,
 						    cache_level);
 		if (++act_pte == I915_PPGTT_PT_ENTRIES) {
@@ -424,8 +423,7 @@ static void gen6_ggtt_insert_entries(struct drm_device *dev,
 	dma_addr_t addr;
 
 	for_each_sg_page(st->sgl, &sg_iter, st->nents, 0) {
-		addr = sg_dma_address(sg_iter.sg) +
-			(sg_iter.sg_pgoffset << PAGE_SHIFT);
+		addr = sg_page_iter_dma_address(&sg_iter);
 		iowrite32(gen6_pte_encode(dev, addr, level), &gtt_entries[i]);
 		i++;
 	}
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index efaaba5c419..130d1db27e2 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -222,8 +222,8 @@ i915_pages_create_for_stolen(struct drm_device *dev,
 	}
 
 	sg = st->sgl;
-	/* we set the dummy page here only to make for_each_sg_page work */
-	sg_set_page(sg, dev_priv->gtt.scratch_page, size, offset);
+	sg->offset = offset;
+	sg->length = size;
 
 	sg_dma_address(sg) = (dma_addr_t)dev_priv->mm.stolen_base + offset;
 	sg_dma_len(sg) = size;
@@ -312,6 +312,71 @@ i915_gem_object_create_stolen(struct drm_device *dev, u32 size)
 	return NULL;
 }
 
+struct drm_i915_gem_object *
+i915_gem_object_create_stolen_for_preallocated(struct drm_device *dev,
+					       u32 stolen_offset,
+					       u32 gtt_offset,
+					       u32 size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	struct drm_mm_node *stolen;
+
+	if (dev_priv->mm.stolen_base == 0)
+		return NULL;
+
+	DRM_DEBUG_KMS("creating preallocated stolen object: stolen_offset=%x, gtt_offset=%x, size=%x\n",
+			stolen_offset, gtt_offset, size);
+
+	/* KISS and expect everything to be page-aligned */
+	BUG_ON(stolen_offset & 4095);
+	BUG_ON(gtt_offset & 4095);
+	BUG_ON(size & 4095);
+
+	if (WARN_ON(size == 0))
+		return NULL;
+
+	stolen = drm_mm_create_block(&dev_priv->mm.stolen,
+				     stolen_offset, size,
+				     false);
+	if (stolen == NULL) {
+		DRM_DEBUG_KMS("failed to allocate stolen space\n");
+		return NULL;
+	}
+
+	obj = _i915_gem_object_create_stolen(dev, stolen);
+	if (obj == NULL) {
+		DRM_DEBUG_KMS("failed to allocate stolen object\n");
+		drm_mm_put_block(stolen);
+		return NULL;
+	}
+
+	/* To simplify the initialisation sequence between KMS and GTT,
+	 * we allow construction of the stolen object prior to
+	 * setting up the GTT space. The actual reservation will occur
+	 * later.
+	 */
+	if (drm_mm_initialized(&dev_priv->mm.gtt_space)) {
+		obj->gtt_space = drm_mm_create_block(&dev_priv->mm.gtt_space,
+						     gtt_offset, size,
+						     false);
+		if (obj->gtt_space == NULL) {
+			DRM_DEBUG_KMS("failed to allocate stolen GTT space\n");
+			drm_gem_object_unreference(&obj->base);
+			return NULL;
+		}
+	} else
+		obj->gtt_space = I915_GTT_RESERVED;
+
+	obj->gtt_offset = gtt_offset;
+	obj->has_global_gtt_mapping = 1;
+
+	list_add_tail(&obj->gtt_list, &dev_priv->mm.bound_list);
+	list_add_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
+
+	return obj;
+}
+
 void
 i915_gem_object_release_stolen(struct drm_i915_gem_object *obj)
 {
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index f799708bcb8..c807eb93755 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -481,7 +481,7 @@ i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj)
 
 	i = 0;
 	for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) {
-		struct page *page = sg_iter.page;
+		struct page *page = sg_page_iter_page(&sg_iter);
 		char new_bit_17 = page_to_phys(page) >> 17;
 		if ((new_bit_17 & 0x1) !=
 		    (test_bit(i, obj->bit_17) != 0)) {
@@ -511,7 +511,7 @@ i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj)
 
 	i = 0;
 	for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) {
-		if (page_to_phys(sg_iter.page) & (1 << 17))
+		if (page_to_phys(sg_page_iter_page(&sg_iter)) & (1 << 17))
 			__set_bit(i, obj->bit_17);
 		else
 			__clear_bit(i, obj->bit_17);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 5fc178e1e51..4c5bdd03738 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -36,6 +36,60 @@
 #include "i915_trace.h"
 #include "intel_drv.h"
 
+static const u32 hpd_ibx[] = {
+	[HPD_CRT] = SDE_CRT_HOTPLUG,
+	[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
+	[HPD_PORT_B] = SDE_PORTB_HOTPLUG,
+	[HPD_PORT_C] = SDE_PORTC_HOTPLUG,
+	[HPD_PORT_D] = SDE_PORTD_HOTPLUG
+};
+
+static const u32 hpd_cpt[] = {
+	[HPD_CRT] = SDE_CRT_HOTPLUG_CPT,
+	[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT,
+	[HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
+	[HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,
+	[HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT
+};
+
+static const u32 hpd_mask_i915[] = {
+	[HPD_CRT] = CRT_HOTPLUG_INT_EN,
+	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN,
+	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,
+	[HPD_PORT_B] = PORTB_HOTPLUG_INT_EN,
+	[HPD_PORT_C] = PORTC_HOTPLUG_INT_EN,
+	[HPD_PORT_D] = PORTD_HOTPLUG_INT_EN
+};
+
+static const u32 hpd_status_gen4[] = {
+	[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X,
+	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,
+	[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+	[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+	[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+static const u32 hpd_status_i965[] = {
+	 [HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+	 [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I965,
+	 [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I965,
+	 [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+	 [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+	 [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
+	[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915,
+	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,
+	[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+	[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+	[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+
+
 /* For display hotplug interrupt */
 static void
 ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -47,7 +101,7 @@ ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
 	}
 }
 
-static inline void
+static void
 ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
 {
 	if ((dev_priv->irq_mask & mask) != mask) {
@@ -599,7 +653,7 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 
 			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
 					 hotplug_status);
-			if (hotplug_status & dev_priv->hotplug_supported_mask)
+			if (hotplug_status & HOTPLUG_INT_STATUS_I915)
 				queue_work(dev_priv->wq,
 					   &dev_priv->hotplug_work);
 
@@ -1387,8 +1441,9 @@ static void i915_capture_error_state(struct drm_device *dev)
 	else if (INTEL_INFO(dev)->gen == 6)
 		error->forcewake = I915_READ(FORCEWAKE);
 
-	for_each_pipe(pipe)
-		error->pipestat[pipe] = I915_READ(PIPESTAT(pipe));
+	if (!HAS_PCH_SPLIT(dev))
+		for_each_pipe(pipe)
+			error->pipestat[pipe] = I915_READ(PIPESTAT(pipe));
 
 	if (INTEL_INFO(dev)->gen >= 6) {
 		error->error = I915_READ(ERROR_GEN6);
@@ -1974,7 +2029,13 @@ static void ironlake_irq_preinstall(struct drm_device *dev)
 
 	/* south display irq */
 	I915_WRITE(SDEIMR, 0xffffffff);
-	I915_WRITE(SDEIER, 0x0);
+	/*
+	 * SDEIER is also touched by the interrupt handler to work around missed
+	 * PCH interrupts. Hence we can't update it after the interrupt handler
+	 * is enabled - instead we unconditionally enable all PCH interrupt
+	 * sources here, but then only unmask them as needed with SDEIMR.
+	 */
+	I915_WRITE(SDEIER, 0xffffffff);
 	POSTING_READ(SDEIER);
 }
 
@@ -2010,18 +2071,30 @@ static void valleyview_irq_preinstall(struct drm_device *dev)
 	POSTING_READ(VLV_IER);
 }
 
-/*
- * Enable digital hotplug on the PCH, and configure the DP short pulse
- * duration to 2ms (which is the minimum in the Display Port spec)
- *
- * This register is the same on all known PCH chips.
- */
-
-static void ibx_enable_hotplug(struct drm_device *dev)
+static void ibx_hpd_irq_setup(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32	hotplug;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *intel_encoder;
+	u32 mask = ~I915_READ(SDEIMR);
+	u32 hotplug;
+
+	if (HAS_PCH_IBX(dev)) {
+		list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+			mask |= hpd_ibx[intel_encoder->hpd_pin];
+	} else {
+		list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+			mask |= hpd_cpt[intel_encoder->hpd_pin];
+	}
+
+	I915_WRITE(SDEIMR, ~mask);
 
+	/*
+	 * Enable digital hotplug on the PCH, and configure the DP short pulse
+	 * duration to 2ms (which is the minimum in the Display Port spec)
+	 *
+	 * This register is the same on all known PCH chips.
+	 */
 	hotplug = I915_READ(PCH_PORT_HOTPLUG);
 	hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK);
 	hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms;
@@ -2036,20 +2109,11 @@ static void ibx_irq_postinstall(struct drm_device *dev)
 	u32 mask;
 
 	if (HAS_PCH_IBX(dev))
-		mask = SDE_HOTPLUG_MASK |
-		       SDE_GMBUS |
-		       SDE_AUX_MASK;
+		mask = SDE_GMBUS | SDE_AUX_MASK;
 	else
-		mask = SDE_HOTPLUG_MASK_CPT |
-		       SDE_GMBUS_CPT |
-		       SDE_AUX_MASK_CPT;
-
+		mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;
 	I915_WRITE(SDEIIR, I915_READ(SDEIIR));
 	I915_WRITE(SDEIMR, ~mask);
-	I915_WRITE(SDEIER, mask);
-	POSTING_READ(SDEIER);
-
-	ibx_enable_hotplug(dev);
 }
 
 static int ironlake_irq_postinstall(struct drm_device *dev)
@@ -2203,30 +2267,6 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-static void valleyview_hpd_irq_setup(struct drm_device *dev)
-{
-	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
-	/* Note HDMI and DP share bits */
-	if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
-		hotplug_en |= PORTB_HOTPLUG_INT_EN;
-	if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
-		hotplug_en |= PORTC_HOTPLUG_INT_EN;
-	if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
-		hotplug_en |= PORTD_HOTPLUG_INT_EN;
-	if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
-		hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-	if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
-		hotplug_en |= SDVOB_HOTPLUG_INT_EN;
-	if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
-		hotplug_en |= CRT_HOTPLUG_INT_EN;
-		hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-	}
-
-	I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-}
-
 static void valleyview_irq_uninstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -2487,35 +2527,6 @@ static int i915_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-static void i915_hpd_irq_setup(struct drm_device *dev)
-{
-	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32 hotplug_en;
-
-	if (I915_HAS_HOTPLUG(dev)) {
-		hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
-		if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
-			hotplug_en |= PORTB_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
-			hotplug_en |= PORTC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
-			hotplug_en |= PORTD_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
-			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
-			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
-			hotplug_en |= CRT_HOTPLUG_INT_EN;
-			hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-		}
-
-		/* Ignore TV since it's buggy */
-
-		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-	}
-}
-
 /*
  * Returns true when a page flip has completed.
  */
@@ -2599,7 +2610,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
 
 			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
 				  hotplug_status);
-			if (hotplug_status & dev_priv->hotplug_supported_mask)
+			if (hotplug_status & HOTPLUG_INT_STATUS_I915)
 				queue_work(dev_priv->wq,
 					   &dev_priv->hotplug_work);
 
@@ -2745,45 +2756,32 @@ static int i965_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-static void i965_hpd_irq_setup(struct drm_device *dev)
+static void i915_hpd_irq_setup(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
 	u32 hotplug_en;
 
-	/* Note HDMI and DP share hotplug bits */
-	hotplug_en = 0;
-	if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
-		hotplug_en |= PORTB_HOTPLUG_INT_EN;
-	if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
-		hotplug_en |= PORTC_HOTPLUG_INT_EN;
-	if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
-		hotplug_en |= PORTD_HOTPLUG_INT_EN;
-	if (IS_G4X(dev)) {
-		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
-			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
-			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
-	} else {
-		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
-			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
-			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
-	}
-	if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
-		hotplug_en |= CRT_HOTPLUG_INT_EN;
-
+	if (I915_HAS_HOTPLUG(dev)) {
+		hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+		hotplug_en &= ~HOTPLUG_INT_EN_MASK;
+		/* Note HDMI and DP share hotplug bits */
+		/* enable bits are the same for all generations */
+		list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+			hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
 		/* Programming the CRT detection parameters tends
 		   to generate a spurious hotplug event about three
 		   seconds later.  So just do it once.
-		   */
+		*/
 		if (IS_G4X(dev))
 			hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+		hotplug_en &= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK;
 		hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-	}
 
-	/* Ignore TV since it's buggy */
-
-	I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+		/* Ignore TV since it's buggy */
+		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+	}
 }
 
 static irqreturn_t i965_irq_handler(int irq, void *arg)
@@ -2845,7 +2843,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 
 			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
 				  hotplug_status);
-			if (hotplug_status & dev_priv->hotplug_supported_mask)
+			if (hotplug_status & (IS_G4X(dev) ?
+					      HOTPLUG_INT_STATUS_G4X :
+					      HOTPLUG_INT_STATUS_I965))
 				queue_work(dev_priv->wq,
 					   &dev_priv->hotplug_work);
 
@@ -2958,7 +2958,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->irq_uninstall = valleyview_irq_uninstall;
 		dev->driver->enable_vblank = valleyview_enable_vblank;
 		dev->driver->disable_vblank = valleyview_disable_vblank;
-		dev_priv->display.hpd_irq_setup = valleyview_hpd_irq_setup;
+		dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
 	} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
 		/* Share pre & uninstall handlers with ILK/SNB */
 		dev->driver->irq_handler = ivybridge_irq_handler;
@@ -2967,6 +2967,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->irq_uninstall = ironlake_irq_uninstall;
 		dev->driver->enable_vblank = ivybridge_enable_vblank;
 		dev->driver->disable_vblank = ivybridge_disable_vblank;
+		dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
 	} else if (HAS_PCH_SPLIT(dev)) {
 		dev->driver->irq_handler = ironlake_irq_handler;
 		dev->driver->irq_preinstall = ironlake_irq_preinstall;
@@ -2974,6 +2975,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->irq_uninstall = ironlake_irq_uninstall;
 		dev->driver->enable_vblank = ironlake_enable_vblank;
 		dev->driver->disable_vblank = ironlake_disable_vblank;
+		dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
 	} else {
 		if (INTEL_INFO(dev)->gen == 2) {
 			dev->driver->irq_preinstall = i8xx_irq_preinstall;
@@ -2991,7 +2993,7 @@ void intel_irq_init(struct drm_device *dev)
 			dev->driver->irq_postinstall = i965_irq_postinstall;
 			dev->driver->irq_uninstall = i965_irq_uninstall;
 			dev->driver->irq_handler = i965_irq_handler;
-			dev_priv->display.hpd_irq_setup = i965_hpd_irq_setup;
+			dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
 		}
 		dev->driver->enable_vblank = i915_enable_vblank;
 		dev->driver->disable_vblank = i915_disable_vblank;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index bceca115913..058686c0dbb 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -91,6 +91,7 @@
 #define  GRDOM_FULL	(0<<2)
 #define  GRDOM_RENDER	(1<<2)
 #define  GRDOM_MEDIA	(3<<2)
+#define  GRDOM_MASK	(3<<2)
 #define  GRDOM_RESET_ENABLE (1<<0)
 
 #define GEN6_MBCUNIT_SNPCR	0x900c /* for LLC config */
@@ -1642,6 +1643,12 @@
 #define   SDVOC_HOTPLUG_INT_EN			(1 << 25)
 #define   TV_HOTPLUG_INT_EN			(1 << 18)
 #define   CRT_HOTPLUG_INT_EN			(1 << 9)
+#define HOTPLUG_INT_EN_MASK			(PORTB_HOTPLUG_INT_EN | \
+						 PORTC_HOTPLUG_INT_EN | \
+						 PORTD_HOTPLUG_INT_EN | \
+						 SDVOC_HOTPLUG_INT_EN | \
+						 SDVOB_HOTPLUG_INT_EN | \
+						 CRT_HOTPLUG_INT_EN)
 #define   CRT_HOTPLUG_FORCE_DETECT		(1 << 3)
 #define CRT_HOTPLUG_ACTIVATION_PERIOD_32	(0 << 8)
 /* must use period 64 on GM45 according to docs */
@@ -1680,6 +1687,26 @@
 #define   SDVOB_HOTPLUG_INT_STATUS_I965		(3 << 2)
 #define   SDVOC_HOTPLUG_INT_STATUS_I915		(1 << 7)
 #define   SDVOB_HOTPLUG_INT_STATUS_I915		(1 << 6)
+#define   HOTPLUG_INT_STATUS_G4X		(CRT_HOTPLUG_INT_STATUS | \
+						 SDVOB_HOTPLUG_INT_STATUS_G4X | \
+						 SDVOC_HOTPLUG_INT_STATUS_G4X | \
+						 PORTB_HOTPLUG_INT_STATUS | \
+						 PORTC_HOTPLUG_INT_STATUS | \
+						 PORTD_HOTPLUG_INT_STATUS)
+
+#define HOTPLUG_INT_STATUS_I965			(CRT_HOTPLUG_INT_STATUS | \
+						 SDVOB_HOTPLUG_INT_STATUS_I965 | \
+						 SDVOC_HOTPLUG_INT_STATUS_I965 | \
+						 PORTB_HOTPLUG_INT_STATUS | \
+						 PORTC_HOTPLUG_INT_STATUS | \
+						 PORTD_HOTPLUG_INT_STATUS)
+
+#define HOTPLUG_INT_STATUS_I915			(CRT_HOTPLUG_INT_STATUS | \
+						 SDVOB_HOTPLUG_INT_STATUS_I915 | \
+						 SDVOC_HOTPLUG_INT_STATUS_I915 | \
+						 PORTB_HOTPLUG_INT_STATUS | \
+						 PORTC_HOTPLUG_INT_STATUS | \
+						 PORTD_HOTPLUG_INT_STATUS)
 
 /* SDVO and HDMI port control.
  * The same register may be used for SDVO or HDMI */
@@ -3261,6 +3288,63 @@
 #define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC)
 #define SPRSURFLIVE(pipe) _PIPE(pipe, _SPRA_SURFLIVE, _SPRB_SURFLIVE)
 
+#define _SPACNTR		0x72180
+#define   SP_ENABLE			(1<<31)
+#define   SP_GEAMMA_ENABLE		(1<<30)
+#define   SP_PIXFORMAT_MASK		(0xf<<26)
+#define   SP_FORMAT_YUV422		(0<<26)
+#define   SP_FORMAT_BGR565		(5<<26)
+#define   SP_FORMAT_BGRX8888		(6<<26)
+#define   SP_FORMAT_BGRA8888		(7<<26)
+#define   SP_FORMAT_RGBX1010102		(8<<26)
+#define   SP_FORMAT_RGBA1010102		(9<<26)
+#define   SP_FORMAT_RGBX8888		(0xe<<26)
+#define   SP_FORMAT_RGBA8888		(0xf<<26)
+#define   SP_SOURCE_KEY			(1<<22)
+#define   SP_YUV_BYTE_ORDER_MASK	(3<<16)
+#define   SP_YUV_ORDER_YUYV		(0<<16)
+#define   SP_YUV_ORDER_UYVY		(1<<16)
+#define   SP_YUV_ORDER_YVYU		(2<<16)
+#define   SP_YUV_ORDER_VYUY		(3<<16)
+#define   SP_TILED			(1<<10)
+#define _SPALINOFF		0x72184
+#define _SPASTRIDE		0x72188
+#define _SPAPOS			0x7218c
+#define _SPASIZE		0x72190
+#define _SPAKEYMINVAL		0x72194
+#define _SPAKEYMSK		0x72198
+#define _SPASURF		0x7219c
+#define _SPAKEYMAXVAL		0x721a0
+#define _SPATILEOFF		0x721a4
+#define _SPACONSTALPHA		0x721a8
+#define _SPAGAMC		0x721f4
+
+#define _SPBCNTR		0x72280
+#define _SPBLINOFF		0x72284
+#define _SPBSTRIDE		0x72288
+#define _SPBPOS			0x7228c
+#define _SPBSIZE		0x72290
+#define _SPBKEYMINVAL		0x72294
+#define _SPBKEYMSK		0x72298
+#define _SPBSURF		0x7229c
+#define _SPBKEYMAXVAL		0x722a0
+#define _SPBTILEOFF		0x722a4
+#define _SPBCONSTALPHA		0x722a8
+#define _SPBGAMC		0x722f4
+
+#define SPCNTR(pipe, plane) _PIPE(pipe * 2 + plane, _SPACNTR, _SPBCNTR)
+#define SPLINOFF(pipe, plane) _PIPE(pipe * 2 + plane, _SPALINOFF, _SPBLINOFF)
+#define SPSTRIDE(pipe, plane) _PIPE(pipe * 2 + plane, _SPASTRIDE, _SPBSTRIDE)
+#define SPPOS(pipe, plane) _PIPE(pipe * 2 + plane, _SPAPOS, _SPBPOS)
+#define SPSIZE(pipe, plane) _PIPE(pipe * 2 + plane, _SPASIZE, _SPBSIZE)
+#define SPKEYMINVAL(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMINVAL, _SPBKEYMINVAL)
+#define SPKEYMSK(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMSK, _SPBKEYMSK)
+#define SPSURF(pipe, plane) _PIPE(pipe * 2 + plane, _SPASURF, _SPBSURF)
+#define SPKEYMAXVAL(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMAXVAL, _SPBKEYMAXVAL)
+#define SPTILEOFF(pipe, plane) _PIPE(pipe * 2 + plane, _SPATILEOFF, _SPBTILEOFF)
+#define SPCONSTALPHA(pipe, plane) _PIPE(pipe * 2 + plane, _SPACONSTALPHA, _SPBCONSTALPHA)
+#define SPGAMC(pipe, plane) _PIPE(pipe * 2 + plane, _SPAGAMC, _SPBGAMC)
+
 /* VBIOS regs */
 #define VGACNTRL		0x71400
 # define VGA_DISP_DISABLE			(1 << 31)
@@ -3536,7 +3620,11 @@
 #define SDE_PORTC_HOTPLUG       (1 << 9)
 #define SDE_PORTB_HOTPLUG       (1 << 8)
 #define SDE_SDVOB_HOTPLUG       (1 << 6)
-#define SDE_HOTPLUG_MASK	(0xf << 8)
+#define SDE_HOTPLUG_MASK        (SDE_CRT_HOTPLUG | \
+				 SDE_SDVOB_HOTPLUG |	\
+				 SDE_PORTB_HOTPLUG |	\
+				 SDE_PORTC_HOTPLUG |	\
+				 SDE_PORTD_HOTPLUG)
 #define SDE_TRANSB_CRC_DONE	(1 << 5)
 #define SDE_TRANSB_CRC_ERR	(1 << 4)
 #define SDE_TRANSB_FIFO_UNDER	(1 << 3)
@@ -3559,7 +3647,9 @@
 #define SDE_PORTC_HOTPLUG_CPT	(1 << 22)
 #define SDE_PORTB_HOTPLUG_CPT	(1 << 21)
 #define SDE_CRT_HOTPLUG_CPT	(1 << 19)
+#define SDE_SDVOB_HOTPLUG_CPT	(1 << 18)
 #define SDE_HOTPLUG_MASK_CPT	(SDE_CRT_HOTPLUG_CPT |		\
+				 SDE_SDVOB_HOTPLUG_CPT |	\
 				 SDE_PORTD_HOTPLUG_CPT |	\
 				 SDE_PORTC_HOTPLUG_CPT |	\
 				 SDE_PORTB_HOTPLUG_CPT)
@@ -4022,6 +4112,15 @@
 #define PIPEB_PP_OFF_DELAYS     (VLV_DISPLAY_BASE + 0x6130c)
 #define PIPEB_PP_DIVISOR        (VLV_DISPLAY_BASE + 0x61310)
 
+#define VLV_PIPE_PP_STATUS(pipe) _PIPE(pipe, PIPEA_PP_STATUS, PIPEB_PP_STATUS)
+#define VLV_PIPE_PP_CONTROL(pipe) _PIPE(pipe, PIPEA_PP_CONTROL, PIPEB_PP_CONTROL)
+#define VLV_PIPE_PP_ON_DELAYS(pipe) \
+		_PIPE(pipe, PIPEA_PP_ON_DELAYS, PIPEB_PP_ON_DELAYS)
+#define VLV_PIPE_PP_OFF_DELAYS(pipe) \
+		_PIPE(pipe, PIPEA_PP_OFF_DELAYS, PIPEB_PP_OFF_DELAYS)
+#define VLV_PIPE_PP_DIVISOR(pipe) \
+		_PIPE(pipe, PIPEA_PP_DIVISOR, PIPEB_PP_DIVISOR)
+
 #define PCH_PP_STATUS		0xc7200
 #define PCH_PP_CONTROL		0xc7204
 #define  PANEL_UNLOCK_REGS	(0xabcd << 16)
@@ -4190,6 +4289,7 @@
 #define GEN6_RPNSWREQ				0xA008
 #define   GEN6_TURBO_DISABLE			(1<<31)
 #define   GEN6_FREQUENCY(x)			((x)<<25)
+#define   HSW_FREQUENCY(x)			((x)<<24)
 #define   GEN6_OFFSET(x)			((x)<<19)
 #define   GEN6_AGGRESSIVE_TURBO			(0<<15)
 #define GEN6_RC_VIDEO_FREQ			0xA00C
@@ -4281,6 +4381,20 @@
 #define GEN6_PCODE_DATA				0x138128
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 
+#define VLV_IOSF_DOORBELL_REQ			0x182100
+#define   IOSF_DEVFN_SHIFT			24
+#define   IOSF_OPCODE_SHIFT			16
+#define   IOSF_PORT_SHIFT			8
+#define   IOSF_BYTE_ENABLES_SHIFT		4
+#define   IOSF_BAR_SHIFT			1
+#define   IOSF_SB_BUSY				(1<<0)
+#define   IOSF_PORT_PUNIT			0x4
+#define VLV_IOSF_DATA				0x182104
+#define VLV_IOSF_ADDR				0x182108
+
+#define PUNIT_OPCODE_REG_READ			6
+#define PUNIT_OPCODE_REG_WRITE			7
+
 #define GEN6_GT_CORE_STATUS		0x138060
 #define   GEN6_CORE_CPD_STATE_MASK	(7<<4)
 #define   GEN6_RCn_MASK			7
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 1ce45a0a2d3..1d8d63aff44 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -199,10 +199,14 @@ static int intel_crt_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
-				 const struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode)
+static bool intel_crt_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_config *pipe_config)
 {
+	struct drm_device *dev = encoder->base.dev;
+
+	if (HAS_PCH_SPLIT(dev))
+		pipe_config->has_pch_encoder = true;
+
 	return true;
 }
 
@@ -676,7 +680,6 @@ static void intel_crt_reset(struct drm_connector *connector)
  */
 
 static const struct drm_encoder_helper_funcs crt_encoder_funcs = {
-	.mode_fixup = intel_crt_mode_fixup,
 	.mode_set = intel_crt_mode_set,
 };
 
@@ -768,8 +771,11 @@ void intel_crt_init(struct drm_device *dev)
 	else
 		crt->adpa_reg = ADPA;
 
+	crt->base.compute_config = intel_crt_compute_config;
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
+	if (I915_HAS_HOTPLUG(dev))
+		crt->base.hpd_pin = HPD_CRT;
 	if (HAS_DDI(dev))
 		crt->base.get_hw_state = intel_ddi_get_hw_state;
 	else
@@ -791,8 +797,6 @@ void intel_crt_init(struct drm_device *dev)
 	 */
 	crt->force_hotplug_required = 0;
 
-	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
-
 	/*
 	 * TODO: find a proper way to discover whether we need to set the the
 	 * polarity and link reversal bits or not, instead of relying on the
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index bfcc58ffecb..22524cb6903 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -898,6 +898,9 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock)
 			plls->spll_refcount++;
 			reg = SPLL_CTL;
 			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_SPLL;
+		} else {
+			DRM_ERROR("SPLL already in use\n");
+			return false;
 		}
 
 		WARN(I915_READ(reg) & SPLL_PLL_ENABLE,
@@ -928,7 +931,7 @@ void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
 	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
 
 		temp = TRANS_MSA_SYNC_CLK;
-		switch (intel_crtc->bpp) {
+		switch (intel_crtc->config.pipe_bpp) {
 		case 18:
 			temp |= TRANS_MSA_6_BPC;
 			break;
@@ -942,15 +945,13 @@ void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
 			temp |= TRANS_MSA_12_BPC;
 			break;
 		default:
-			temp |= TRANS_MSA_8_BPC;
-			WARN(1, "%d bpp unsupported by DDI function\n",
-			     intel_crtc->bpp);
+			BUG();
 		}
 		I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
 	}
 }
 
-void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
+void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc)
 {
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
@@ -966,7 +967,7 @@ void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
 	temp = TRANS_DDI_FUNC_ENABLE;
 	temp |= TRANS_DDI_SELECT_PORT(port);
 
-	switch (intel_crtc->bpp) {
+	switch (intel_crtc->config.pipe_bpp) {
 	case 18:
 		temp |= TRANS_DDI_BPC_6;
 		break;
@@ -980,8 +981,7 @@ void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
 		temp |= TRANS_DDI_BPC_12;
 		break;
 	default:
-		WARN(1, "%d bpp unsupported by transcoder DDI function\n",
-		     intel_crtc->bpp);
+		BUG();
 	}
 
 	if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
@@ -1150,14 +1150,14 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
 
 	DRM_DEBUG_KMS("No pipe for ddi port %i found\n", port);
 
-	return true;
+	return false;
 }
 
 static uint32_t intel_ddi_get_crtc_pll(struct drm_i915_private *dev_priv,
 				       enum pipe pipe)
 {
 	uint32_t temp, ret;
-	enum port port;
+	enum port port = I915_MAX_PORTS;
 	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 								      pipe);
 	int i;
@@ -1173,10 +1173,16 @@ static uint32_t intel_ddi_get_crtc_pll(struct drm_i915_private *dev_priv,
 				port = i;
 	}
 
-	ret = I915_READ(PORT_CLK_SEL(port));
-
-	DRM_DEBUG_KMS("Pipe %c connected to port %c using clock 0x%08x\n",
-		      pipe_name(pipe), port_name(port), ret);
+	if (port == I915_MAX_PORTS) {
+		WARN(1, "Pipe %c enabled on an unknown port\n",
+		     pipe_name(pipe));
+		ret = PORT_CLK_SEL_NONE;
+	} else {
+		ret = I915_READ(PORT_CLK_SEL(port));
+		DRM_DEBUG_KMS("Pipe %c connected to port %c using clock "
+			      "0x%08x\n", pipe_name(pipe), port_name(port),
+			      ret);
+	}
 
 	return ret;
 }
@@ -1467,19 +1473,17 @@ static void intel_ddi_destroy(struct drm_encoder *encoder)
 	intel_dp_encoder_destroy(encoder);
 }
 
-static bool intel_ddi_mode_fixup(struct drm_encoder *encoder,
-				 const struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode)
+static bool intel_ddi_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_config *pipe_config)
 {
-	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
-	int type = intel_encoder->type;
+	int type = encoder->type;
 
-	WARN(type == INTEL_OUTPUT_UNKNOWN, "mode_fixup() on unknown output!\n");
+	WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n");
 
 	if (type == INTEL_OUTPUT_HDMI)
-		return intel_hdmi_mode_fixup(encoder, mode, adjusted_mode);
+		return intel_hdmi_compute_config(encoder, pipe_config);
 	else
-		return intel_dp_mode_fixup(encoder, mode, adjusted_mode);
+		return intel_dp_compute_config(encoder, pipe_config);
 }
 
 static const struct drm_encoder_funcs intel_ddi_funcs = {
@@ -1487,7 +1491,6 @@ static const struct drm_encoder_funcs intel_ddi_funcs = {
 };
 
 static const struct drm_encoder_helper_funcs intel_ddi_helper_funcs = {
-	.mode_fixup = intel_ddi_mode_fixup,
 	.mode_set = intel_ddi_mode_set,
 };
 
@@ -1527,6 +1530,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
 			 DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(encoder, &intel_ddi_helper_funcs);
 
+	intel_encoder->compute_config = intel_ddi_compute_config;
 	intel_encoder->enable = intel_enable_ddi;
 	intel_encoder->pre_enable = intel_ddi_pre_enable;
 	intel_encoder->disable = intel_disable_ddi;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 14bfbed81b4..b7005640144 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1288,6 +1288,25 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
 	}
 }
 
+static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
+				    enum pipe pipe)
+{
+	int reg, i;
+	u32 val;
+
+	if (!IS_VALLEYVIEW(dev_priv->dev))
+		return;
+
+	/* Need to check both planes against the pipe */
+	for (i = 0; i < dev_priv->num_plane; i++) {
+		reg = SPCNTR(pipe, i);
+		val = I915_READ(reg);
+		WARN((val & SP_ENABLE),
+		     "sprite %d assertion failure, should be off on pipe %c but is still active\n",
+		     pipe * 2 + i, pipe_name(pipe));
+	}
+}
+
 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
 {
 	u32 val;
@@ -1872,6 +1891,7 @@ static void intel_disable_pipe(struct drm_i915_private *dev_priv,
 	 * or we might hang the display.
 	 */
 	assert_planes_disabled(dev_priv, pipe);
+	assert_sprites_disabled(dev_priv, pipe);
 
 	/* Don't disable pipe A or pipe A PLLs if needed */
 	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
@@ -1950,6 +1970,15 @@ static void intel_disable_plane(struct drm_i915_private *dev_priv,
 	intel_wait_for_vblank(dev_priv->dev, pipe);
 }
 
+static bool need_vtd_wa(struct drm_device *dev)
+{
+#ifdef CONFIG_INTEL_IOMMU
+	if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
+		return true;
+#endif
+	return false;
+}
+
 int
 intel_pin_and_fence_fb_obj(struct drm_device *dev,
 			   struct drm_i915_gem_object *obj,
@@ -1980,6 +2009,14 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev,
 		BUG();
 	}
 
+	/* Note that the w/a also requires 64 PTE of padding following the
+	 * bo. We currently fill all unused PTE with the shadow page and so
+	 * we should always have valid PTE following the scanout preventing
+	 * the VT-d warning.
+	 */
+	if (need_vtd_wa(dev) && alignment < 256 * 1024)
+		alignment = 256 * 1024;
+
 	dev_priv->mm.interruptible = false;
 	ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
 	if (ret)
@@ -2096,8 +2133,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 		dspcntr |= DISPPLANE_RGBX101010;
 		break;
 	default:
-		DRM_ERROR("Unknown pixel format 0x%08x\n", fb->pixel_format);
-		return -EINVAL;
+		BUG();
 	}
 
 	if (INTEL_INFO(dev)->gen >= 4) {
@@ -2190,8 +2226,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 		dspcntr |= DISPPLANE_RGBX101010;
 		break;
 	default:
-		DRM_ERROR("Unknown pixel format 0x%08x\n", fb->pixel_format);
-		return -EINVAL;
+		BUG();
 	}
 
 	if (obj->tiling_mode != I915_TILING_NONE)
@@ -2960,32 +2995,6 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 	mutex_unlock(&dev->struct_mutex);
 }
 
-static bool ironlake_crtc_driving_pch(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct intel_encoder *intel_encoder;
-
-	/*
-	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
-	 * must be driven by its own crtc; no sharing is possible.
-	 */
-	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
-		switch (intel_encoder->type) {
-		case INTEL_OUTPUT_EDP:
-			if (!intel_encoder_is_pch_edp(&intel_encoder->base))
-				return false;
-			continue;
-		}
-	}
-
-	return true;
-}
-
-static bool haswell_crtc_driving_pch(struct drm_crtc *crtc)
-{
-	return intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG);
-}
-
 /* Program iCLKIP clock to the desired frequency */
 static void lpt_program_iclkip(struct drm_crtc *crtc)
 {
@@ -3321,7 +3330,6 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	u32 temp;
-	bool is_pch_port;
 
 	WARN_ON(!crtc->enabled);
 
@@ -3337,9 +3345,8 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 			I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
 	}
 
-	is_pch_port = ironlake_crtc_driving_pch(crtc);
 
-	if (is_pch_port) {
+	if (intel_crtc->config.has_pch_encoder) {
 		/* Note: FDI PLL enabling _must_ be done before we enable the
 		 * cpu pipes, hence this is separate from all the other fdi/pch
 		 * enabling. */
@@ -3376,10 +3383,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	 */
 	intel_crtc_load_lut(crtc);
 
-	intel_enable_pipe(dev_priv, pipe, is_pch_port);
+	intel_enable_pipe(dev_priv, pipe,
+			  intel_crtc->config.has_pch_encoder);
 	intel_enable_plane(dev_priv, plane, pipe);
 
-	if (is_pch_port)
+	if (intel_crtc->config.has_pch_encoder)
 		ironlake_pch_enable(crtc);
 
 	mutex_lock(&dev->struct_mutex);
@@ -3413,7 +3421,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
-	bool is_pch_port;
 
 	WARN_ON(!crtc->enabled);
 
@@ -3423,9 +3430,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_crtc->active = true;
 	intel_update_watermarks(dev);
 
-	is_pch_port = haswell_crtc_driving_pch(crtc);
-
-	if (is_pch_port)
+	if (intel_crtc->config.has_pch_encoder)
 		dev_priv->display.fdi_link_train(crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
@@ -3454,12 +3459,13 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_crtc_load_lut(crtc);
 
 	intel_ddi_set_pipe_settings(crtc);
-	intel_ddi_enable_pipe_func(crtc);
+	intel_ddi_enable_transcoder_func(crtc);
 
-	intel_enable_pipe(dev_priv, pipe, is_pch_port);
+	intel_enable_pipe(dev_priv, pipe,
+			  intel_crtc->config.has_pch_encoder);
 	intel_enable_plane(dev_priv, plane, pipe);
 
-	if (is_pch_port)
+	if (intel_crtc->config.has_pch_encoder)
 		lpt_pch_enable(crtc);
 
 	mutex_lock(&dev->struct_mutex);
@@ -3571,13 +3577,10 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
-	bool is_pch_port;
 
 	if (!intel_crtc->active)
 		return;
 
-	is_pch_port = haswell_crtc_driving_pch(crtc);
-
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->disable(encoder);
 
@@ -3604,7 +3607,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 		if (encoder->post_disable)
 			encoder->post_disable(encoder);
 
-	if (is_pch_port) {
+	if (intel_crtc->config.has_pch_encoder) {
 		lpt_disable_pch_transcoder(dev_priv);
 		intel_ddi_fdi_disable(crtc);
 	}
@@ -3954,22 +3957,23 @@ bool intel_connector_get_hw_state(struct intel_connector *connector)
 	return encoder->get_hw_state(encoder, &pipe);
 }
 
-static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
-				  const struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode)
+static bool intel_crtc_compute_config(struct drm_crtc *crtc,
+				      struct intel_crtc_config *pipe_config)
 {
 	struct drm_device *dev = crtc->dev;
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 
 	if (HAS_PCH_SPLIT(dev)) {
 		/* FDI link clock is fixed at 2.7G */
-		if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
+		if (pipe_config->requested_mode.clock * 3
+		    > IRONLAKE_FDI_FREQ * 4)
 			return false;
 	}
 
 	/* All interlaced capable intel hw wants timings in frames. Note though
 	 * that intel_lvds_mode_fixup does some funny tricks with the crtc
 	 * timings, so we need to be careful not to clobber these.*/
-	if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
+	if (!pipe_config->timings_set)
 		drm_mode_set_crtcinfo(adjusted_mode, 0);
 
 	/* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes
@@ -3979,6 +3983,14 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
 		adjusted_mode->hsync_start == adjusted_mode->hdisplay)
 		return false;
 
+	if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10) {
+		pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
+	} else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8) {
+		/* only a 8bpc pipe, with 6bpc dither through the panel fitter
+		 * for lvds. */
+		pipe_config->pipe_bpp = 8*3;
+	}
+
 	return true;
 }
 
@@ -4082,142 +4094,6 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
 }
 
-/**
- * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
- * @crtc: CRTC structure
- * @mode: requested mode
- *
- * A pipe may be connected to one or more outputs.  Based on the depth of the
- * attached framebuffer, choose a good color depth to use on the pipe.
- *
- * If possible, match the pipe depth to the fb depth.  In some cases, this
- * isn't ideal, because the connected output supports a lesser or restricted
- * set of depths.  Resolve that here:
- *    LVDS typically supports only 6bpc, so clamp down in that case
- *    HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
- *    Displays may support a restricted set as well, check EDID and clamp as
- *      appropriate.
- *    DP may want to dither down to 6bpc to fit larger modes
- *
- * RETURNS:
- * Dithering requirement (i.e. false if display bpc and pipe bpc match,
- * true if they don't match).
- */
-static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
-					 struct drm_framebuffer *fb,
-					 unsigned int *pipe_bpp,
-					 struct drm_display_mode *mode)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_connector *connector;
-	struct intel_encoder *intel_encoder;
-	unsigned int display_bpc = UINT_MAX, bpc;
-
-	/* Walk the encoders & connectors on this crtc, get min bpc */
-	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
-
-		if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
-			unsigned int lvds_bpc;
-
-			if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
-			    LVDS_A3_POWER_UP)
-				lvds_bpc = 8;
-			else
-				lvds_bpc = 6;
-
-			if (lvds_bpc < display_bpc) {
-				DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
-				display_bpc = lvds_bpc;
-			}
-			continue;
-		}
-
-		/* Not one of the known troublemakers, check the EDID */
-		list_for_each_entry(connector, &dev->mode_config.connector_list,
-				    head) {
-			if (connector->encoder != &intel_encoder->base)
-				continue;
-
-			/* Don't use an invalid EDID bpc value */
-			if (connector->display_info.bpc &&
-			    connector->display_info.bpc < display_bpc) {
-				DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
-				display_bpc = connector->display_info.bpc;
-			}
-		}
-
-		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
-			/* Use VBT settings if we have an eDP panel */
-			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
-
-			if (edp_bpc && edp_bpc < display_bpc) {
-				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
-				display_bpc = edp_bpc;
-			}
-			continue;
-		}
-
-		/*
-		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
-		 * through, clamp it down.  (Note: >12bpc will be caught below.)
-		 */
-		if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
-			if (display_bpc > 8 && display_bpc < 12) {
-				DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
-				display_bpc = 12;
-			} else {
-				DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
-				display_bpc = 8;
-			}
-		}
-	}
-
-	if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-		DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
-		display_bpc = 6;
-	}
-
-	/*
-	 * We could just drive the pipe at the highest bpc all the time and
-	 * enable dithering as needed, but that costs bandwidth.  So choose
-	 * the minimum value that expresses the full color range of the fb but
-	 * also stays within the max display bpc discovered above.
-	 */
-
-	switch (fb->depth) {
-	case 8:
-		bpc = 8; /* since we go through a colormap */
-		break;
-	case 15:
-	case 16:
-		bpc = 6; /* min is 18bpp */
-		break;
-	case 24:
-		bpc = 8;
-		break;
-	case 30:
-		bpc = 10;
-		break;
-	case 48:
-		bpc = 12;
-		break;
-	default:
-		DRM_DEBUG("unsupported depth, assuming 24 bits\n");
-		bpc = min((unsigned int)8, display_bpc);
-		break;
-	}
-
-	display_bpc = min(display_bpc, bpc);
-
-	DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
-		      bpc, display_bpc);
-
-	*pipe_bpp = display_bpc * 3;
-
-	return display_bpc != bpc;
-}
-
 static int vlv_get_refclk(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -4262,37 +4138,38 @@ static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
 	return refclk;
 }
 
-static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
-				      intel_clock_t *clock)
+static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc *crtc)
 {
+	unsigned dotclock = crtc->config.adjusted_mode.clock;
+	struct dpll *clock = &crtc->config.dpll;
+
 	/* SDVO TV has fixed PLL values depend on its clock range,
 	   this mirrors vbios setting. */
-	if (adjusted_mode->clock >= 100000
-	    && adjusted_mode->clock < 140500) {
+	if (dotclock >= 100000 && dotclock < 140500) {
 		clock->p1 = 2;
 		clock->p2 = 10;
 		clock->n = 3;
 		clock->m1 = 16;
 		clock->m2 = 8;
-	} else if (adjusted_mode->clock >= 140500
-		   && adjusted_mode->clock <= 200000) {
+	} else if (dotclock >= 140500 && dotclock <= 200000) {
 		clock->p1 = 1;
 		clock->p2 = 10;
 		clock->n = 6;
 		clock->m1 = 12;
 		clock->m2 = 8;
 	}
+
+	crtc->config.clock_set = true;
 }
 
-static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
-				     intel_clock_t *clock,
+static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
 				     intel_clock_t *reduced_clock)
 {
-	struct drm_device *dev = crtc->dev;
+	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
+	int pipe = crtc->pipe;
 	u32 fp, fp2 = 0;
+	struct dpll *clock = &crtc->config.dpll;
 
 	if (IS_PINEVIEW(dev)) {
 		fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
@@ -4308,26 +4185,29 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
 
 	I915_WRITE(FP0(pipe), fp);
 
-	intel_crtc->lowfreq_avail = false;
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	crtc->lowfreq_avail = false;
+	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
 	    reduced_clock && i915_powersave) {
 		I915_WRITE(FP1(pipe), fp2);
-		intel_crtc->lowfreq_avail = true;
+		crtc->lowfreq_avail = true;
 	} else {
 		I915_WRITE(FP1(pipe), fp);
 	}
 }
 
-static void vlv_update_pll(struct drm_crtc *crtc,
-			   struct drm_display_mode *mode,
-			   struct drm_display_mode *adjusted_mode,
-			   intel_clock_t *clock, intel_clock_t *reduced_clock,
-			   int num_connectors)
+static void intel_dp_set_m_n(struct intel_crtc *crtc)
 {
-	struct drm_device *dev = crtc->dev;
+	if (crtc->config.has_pch_encoder)
+		intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
+	else
+		intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
+}
+
+static void vlv_update_pll(struct intel_crtc *crtc)
+{
+	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
+	int pipe = crtc->pipe;
 	u32 dpll, mdiv, pdiv;
 	u32 bestn, bestm1, bestm2, bestp1, bestp2;
 	bool is_sdvo;
@@ -4335,8 +4215,8 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 
 	mutex_lock(&dev_priv->dpio_lock);
 
-	is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
-		intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
+	is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
+		intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
 
 	dpll = DPLL_VGA_MODE_DIS;
 	dpll |= DPLL_EXT_BUFFER_ENABLE_VLV;
@@ -4346,11 +4226,11 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 	I915_WRITE(DPLL(pipe), dpll);
 	POSTING_READ(DPLL(pipe));
 
-	bestn = clock->n;
-	bestm1 = clock->m1;
-	bestm2 = clock->m2;
-	bestp1 = clock->p1;
-	bestp2 = clock->p2;
+	bestn = crtc->config.dpll.n;
+	bestm1 = crtc->config.dpll.m1;
+	bestm2 = crtc->config.dpll.m2;
+	bestp1 = crtc->config.dpll.p1;
+	bestp2 = crtc->config.dpll.p2;
 
 	/*
 	 * In Valleyview PLL and program lane counter registers are exposed
@@ -4382,8 +4262,8 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 
 	intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620);
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
-		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	if (crtc->config.has_dp_encoder)
+		intel_dp_set_m_n(crtc);
 
 	I915_WRITE(DPLL(pipe), dpll);
 
@@ -4393,26 +4273,25 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 
 	temp = 0;
 	if (is_sdvo) {
-		temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-		if (temp > 1)
-			temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-		else
-			temp = 0;
+		temp = 0;
+		if (crtc->config.pixel_multiplier > 1) {
+			temp = (crtc->config.pixel_multiplier - 1)
+				<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
+		}
 	}
 	I915_WRITE(DPLL_MD(pipe), temp);
 	POSTING_READ(DPLL_MD(pipe));
 
 	/* Now program lane control registers */
-	if(intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)
-			|| intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
-	{
+	if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)
+	   || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) {
 		temp = 0x1000C4;
 		if(pipe == 1)
 			temp |= (1 << 21);
 		intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp);
 	}
-	if(intel_pipe_has_type(crtc,INTEL_OUTPUT_EDP))
-	{
+
+	if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP)) {
 		temp = 0x1000C4;
 		if(pipe == 1)
 			temp |= (1 << 21);
@@ -4422,40 +4301,39 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 	mutex_unlock(&dev_priv->dpio_lock);
 }
 
-static void i9xx_update_pll(struct drm_crtc *crtc,
-			    struct drm_display_mode *mode,
-			    struct drm_display_mode *adjusted_mode,
-			    intel_clock_t *clock, intel_clock_t *reduced_clock,
+static void i9xx_update_pll(struct intel_crtc *crtc,
+			    intel_clock_t *reduced_clock,
 			    int num_connectors)
 {
-	struct drm_device *dev = crtc->dev;
+	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *encoder;
-	int pipe = intel_crtc->pipe;
+	int pipe = crtc->pipe;
 	u32 dpll;
 	bool is_sdvo;
+	struct dpll *clock = &crtc->config.dpll;
 
-	i9xx_update_pll_dividers(crtc, clock, reduced_clock);
+	i9xx_update_pll_dividers(crtc, reduced_clock);
 
-	is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
-		intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
+	is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
+		intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
 
 	dpll = DPLL_VGA_MODE_DIS;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
 		dpll |= DPLLB_MODE_LVDS;
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
+
 	if (is_sdvo) {
-		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-		if (pixel_multiplier > 1) {
-			if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
-				dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+		if ((crtc->config.pixel_multiplier > 1) &&
+		    (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
+			dpll |= (crtc->config.pixel_multiplier - 1)
+				<< SDVO_MULTIPLIER_SHIFT_HIRES;
 		}
 		dpll |= DPLL_DVO_HIGH_SPEED;
 	}
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
 		dpll |= DPLL_DVO_HIGH_SPEED;
 
 	/* compute bitmask from p1 value */
@@ -4483,13 +4361,13 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	if (INTEL_INFO(dev)->gen >= 4)
 		dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
 
-	if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+	if (is_sdvo && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
 		dpll |= PLL_REF_INPUT_TVCLKINBC;
-	else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+	else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
 		/* XXX: just matching BIOS for now */
 		/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
 		dpll |= 3;
-	else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
 		 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
 		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
 	else
@@ -4500,12 +4378,12 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
-	for_each_encoder_on_crtc(dev, crtc, encoder)
+	for_each_encoder_on_crtc(dev, &crtc->base, encoder)
 		if (encoder->pre_pll_enable)
 			encoder->pre_pll_enable(encoder);
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
-		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	if (crtc->config.has_dp_encoder)
+		intel_dp_set_m_n(crtc);
 
 	I915_WRITE(DPLL(pipe), dpll);
 
@@ -4516,11 +4394,11 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	if (INTEL_INFO(dev)->gen >= 4) {
 		u32 temp = 0;
 		if (is_sdvo) {
-			temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-			if (temp > 1)
-				temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-			else
-				temp = 0;
+			temp = 0;
+			if (crtc->config.pixel_multiplier > 1) {
+				temp = (crtc->config.pixel_multiplier - 1)
+					<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
+			}
 		}
 		I915_WRITE(DPLL_MD(pipe), temp);
 	} else {
@@ -4533,23 +4411,23 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	}
 }
 
-static void i8xx_update_pll(struct drm_crtc *crtc,
+static void i8xx_update_pll(struct intel_crtc *crtc,
 			    struct drm_display_mode *adjusted_mode,
-			    intel_clock_t *clock, intel_clock_t *reduced_clock,
+			    intel_clock_t *reduced_clock,
 			    int num_connectors)
 {
-	struct drm_device *dev = crtc->dev;
+	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *encoder;
-	int pipe = intel_crtc->pipe;
+	int pipe = crtc->pipe;
 	u32 dpll;
+	struct dpll *clock = &crtc->config.dpll;
 
-	i9xx_update_pll_dividers(crtc, clock, reduced_clock);
+	i9xx_update_pll_dividers(crtc, reduced_clock);
 
 	dpll = DPLL_VGA_MODE_DIS;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
 		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
 	} else {
 		if (clock->p1 == 2)
@@ -4560,7 +4438,7 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 			dpll |= PLL_P2_DIVIDE_BY_4;
 	}
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
 		 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
 		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
 	else
@@ -4571,7 +4449,7 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
-	for_each_encoder_on_crtc(dev, crtc, encoder)
+	for_each_encoder_on_crtc(dev, &crtc->base, encoder)
 		if (encoder->pre_pll_enable)
 			encoder->pre_pll_enable(encoder);
 
@@ -4647,22 +4525,92 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
 		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
 }
 
+static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t pipeconf;
+
+	pipeconf = I915_READ(PIPECONF(intel_crtc->pipe));
+
+	if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
+		/* Enable pixel doubling when the dot clock is > 90% of the (display)
+		 * core speed.
+		 *
+		 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+		 * pipe == 0 check?
+		 */
+		if (intel_crtc->config.requested_mode.clock >
+		    dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
+			pipeconf |= PIPECONF_DOUBLE_WIDE;
+		else
+			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+	}
+
+	/* default to 8bpc */
+	pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
+	if (intel_crtc->config.has_dp_encoder) {
+		if (intel_crtc->config.dither) {
+			pipeconf |= PIPECONF_6BPC |
+				    PIPECONF_DITHER_EN |
+				    PIPECONF_DITHER_TYPE_SP;
+		}
+	}
+
+	if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(&intel_crtc->base,
+						      INTEL_OUTPUT_EDP)) {
+		if (intel_crtc->config.dither) {
+			pipeconf |= PIPECONF_6BPC |
+					PIPECONF_ENABLE |
+					I965_PIPECONF_ACTIVE;
+		}
+	}
+
+	if (HAS_PIPE_CXSR(dev)) {
+		if (intel_crtc->lowfreq_avail) {
+			DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+			pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+		} else {
+			DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+			pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+		}
+	}
+
+	pipeconf &= ~PIPECONF_INTERLACE_MASK;
+	if (!IS_GEN2(dev) &&
+	    intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
+		pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+	else
+		pipeconf |= PIPECONF_PROGRESSIVE;
+
+	if (IS_VALLEYVIEW(dev)) {
+		if (intel_crtc->config.limited_color_range)
+			pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
+		else
+			pipeconf &= ~PIPECONF_COLOR_RANGE_SELECT;
+	}
+
+	I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
+	POSTING_READ(PIPECONF(intel_crtc->pipe));
+}
+
 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
-			      struct drm_display_mode *mode,
-			      struct drm_display_mode *adjusted_mode,
 			      int x, int y,
 			      struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	int refclk, num_connectors = 0;
 	intel_clock_t clock, reduced_clock;
-	u32 dspcntr, pipeconf;
+	u32 dspcntr;
 	bool ok, has_reduced_clock = false, is_sdvo = false;
-	bool is_lvds = false, is_tv = false, is_dp = false;
+	bool is_lvds = false, is_tv = false;
 	struct intel_encoder *encoder;
 	const intel_limit_t *limit;
 	int ret;
@@ -4681,9 +4629,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 		case INTEL_OUTPUT_TVOUT:
 			is_tv = true;
 			break;
-		case INTEL_OUTPUT_DISPLAYPORT:
-			is_dp = true;
-			break;
 		}
 
 		num_connectors++;
@@ -4720,26 +4665,29 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 						    &clock,
 						    &reduced_clock);
 	}
+	/* Compat-code for transition, will disappear. */
+	if (!intel_crtc->config.clock_set) {
+		intel_crtc->config.dpll.n = clock.n;
+		intel_crtc->config.dpll.m1 = clock.m1;
+		intel_crtc->config.dpll.m2 = clock.m2;
+		intel_crtc->config.dpll.p1 = clock.p1;
+		intel_crtc->config.dpll.p2 = clock.p2;
+	}
 
 	if (is_sdvo && is_tv)
-		i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
+		i9xx_adjust_sdvo_tv_clock(intel_crtc);
 
 	if (IS_GEN2(dev))
-		i8xx_update_pll(crtc, adjusted_mode, &clock,
+		i8xx_update_pll(intel_crtc, adjusted_mode,
 				has_reduced_clock ? &reduced_clock : NULL,
 				num_connectors);
 	else if (IS_VALLEYVIEW(dev))
-		vlv_update_pll(crtc, mode, adjusted_mode, &clock,
-				has_reduced_clock ? &reduced_clock : NULL,
-				num_connectors);
+		vlv_update_pll(intel_crtc);
 	else
-		i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
+		i9xx_update_pll(intel_crtc,
 				has_reduced_clock ? &reduced_clock : NULL,
 				num_connectors);
 
-	/* setup pipeconf */
-	pipeconf = I915_READ(PIPECONF(pipe));
-
 	/* Set up the display plane register */
 	dspcntr = DISPPLANE_GAMMA_ENABLE;
 
@@ -4750,58 +4698,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 			dspcntr |= DISPPLANE_SEL_PIPE_B;
 	}
 
-	if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
-		/* Enable pixel doubling when the dot clock is > 90% of the (display)
-		 * core speed.
-		 *
-		 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
-		 * pipe == 0 check?
-		 */
-		if (mode->clock >
-		    dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
-			pipeconf |= PIPECONF_DOUBLE_WIDE;
-		else
-			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
-	}
-
-	/* default to 8bpc */
-	pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
-	if (is_dp) {
-		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-			pipeconf |= PIPECONF_6BPC |
-				    PIPECONF_DITHER_EN |
-				    PIPECONF_DITHER_TYPE_SP;
-		}
-	}
-
-	if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
-		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-			pipeconf |= PIPECONF_6BPC |
-					PIPECONF_ENABLE |
-					I965_PIPECONF_ACTIVE;
-		}
-	}
-
 	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
 	drm_mode_debug_printmodeline(mode);
 
-	if (HAS_PIPE_CXSR(dev)) {
-		if (intel_crtc->lowfreq_avail) {
-			DRM_DEBUG_KMS("enabling CxSR downclocking\n");
-			pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
-		} else {
-			DRM_DEBUG_KMS("disabling CxSR downclocking\n");
-			pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
-		}
-	}
-
-	pipeconf &= ~PIPECONF_INTERLACE_MASK;
-	if (!IS_GEN2(dev) &&
-	    adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
-		pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
-	else
-		pipeconf |= PIPECONF_PROGRESSIVE;
-
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
 	/* pipesrc and dspsize control the size that is scaled from,
@@ -4812,8 +4711,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 		   (mode->hdisplay - 1));
 	I915_WRITE(DSPPOS(plane), 0);
 
-	I915_WRITE(PIPECONF(pipe), pipeconf);
-	POSTING_READ(PIPECONF(pipe));
+	i9xx_set_pipeconf(intel_crtc);
+
 	intel_enable_pipe(dev_priv, pipe, false);
 
 	intel_wait_for_vblank(dev, pipe);
@@ -4828,12 +4727,26 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	return ret;
 }
 
+static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
+				 struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = I915_READ(PIPECONF(crtc->pipe));
+	if (!(tmp & PIPECONF_ENABLE))
+		return false;
+
+	return true;
+}
+
 static void ironlake_init_pch_refclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct intel_encoder *encoder;
-	u32 temp;
+	u32 val, final;
 	bool has_lvds = false;
 	bool has_cpu_edp = false;
 	bool has_pch_edp = false;
@@ -4876,70 +4789,109 @@ static void ironlake_init_pch_refclk(struct drm_device *dev)
 	 * PCH B stepping, previous chipset stepping should be
 	 * ignoring this setting.
 	 */
-	temp = I915_READ(PCH_DREF_CONTROL);
+	val = I915_READ(PCH_DREF_CONTROL);
+
+	/* As we must carefully and slowly disable/enable each source in turn,
+	 * compute the final state we want first and check if we need to
+	 * make any changes at all.
+	 */
+	final = val;
+	final &= ~DREF_NONSPREAD_SOURCE_MASK;
+	if (has_ck505)
+		final |= DREF_NONSPREAD_CK505_ENABLE;
+	else
+		final |= DREF_NONSPREAD_SOURCE_ENABLE;
+
+	final &= ~DREF_SSC_SOURCE_MASK;
+	final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+	final &= ~DREF_SSC1_ENABLE;
+
+	if (has_panel) {
+		final |= DREF_SSC_SOURCE_ENABLE;
+
+		if (intel_panel_use_ssc(dev_priv) && can_ssc)
+			final |= DREF_SSC1_ENABLE;
+
+		if (has_cpu_edp) {
+			if (intel_panel_use_ssc(dev_priv) && can_ssc)
+				final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+			else
+				final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+		} else
+			final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+	} else {
+		final |= DREF_SSC_SOURCE_DISABLE;
+		final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+	}
+
+	if (final == val)
+		return;
+
 	/* Always enable nonspread source */
-	temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+	val &= ~DREF_NONSPREAD_SOURCE_MASK;
 
 	if (has_ck505)
-		temp |= DREF_NONSPREAD_CK505_ENABLE;
+		val |= DREF_NONSPREAD_CK505_ENABLE;
 	else
-		temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+		val |= DREF_NONSPREAD_SOURCE_ENABLE;
 
 	if (has_panel) {
-		temp &= ~DREF_SSC_SOURCE_MASK;
-		temp |= DREF_SSC_SOURCE_ENABLE;
+		val &= ~DREF_SSC_SOURCE_MASK;
+		val |= DREF_SSC_SOURCE_ENABLE;
 
 		/* SSC must be turned on before enabling the CPU output  */
 		if (intel_panel_use_ssc(dev_priv) && can_ssc) {
 			DRM_DEBUG_KMS("Using SSC on panel\n");
-			temp |= DREF_SSC1_ENABLE;
+			val |= DREF_SSC1_ENABLE;
 		} else
-			temp &= ~DREF_SSC1_ENABLE;
+			val &= ~DREF_SSC1_ENABLE;
 
 		/* Get SSC going before enabling the outputs */
-		I915_WRITE(PCH_DREF_CONTROL, temp);
+		I915_WRITE(PCH_DREF_CONTROL, val);
 		POSTING_READ(PCH_DREF_CONTROL);
 		udelay(200);
 
-		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+		val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
 
 		/* Enable CPU source on CPU attached eDP */
 		if (has_cpu_edp) {
 			if (intel_panel_use_ssc(dev_priv) && can_ssc) {
 				DRM_DEBUG_KMS("Using SSC on eDP\n");
-				temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+				val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
 			}
 			else
-				temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+				val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
 		} else
-			temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+			val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
 
-		I915_WRITE(PCH_DREF_CONTROL, temp);
+		I915_WRITE(PCH_DREF_CONTROL, val);
 		POSTING_READ(PCH_DREF_CONTROL);
 		udelay(200);
 	} else {
 		DRM_DEBUG_KMS("Disabling SSC entirely\n");
 
-		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+		val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
 
 		/* Turn off CPU output */
-		temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+		val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
 
-		I915_WRITE(PCH_DREF_CONTROL, temp);
+		I915_WRITE(PCH_DREF_CONTROL, val);
 		POSTING_READ(PCH_DREF_CONTROL);
 		udelay(200);
 
 		/* Turn off the SSC source */
-		temp &= ~DREF_SSC_SOURCE_MASK;
-		temp |= DREF_SSC_SOURCE_DISABLE;
+		val &= ~DREF_SSC_SOURCE_MASK;
+		val |= DREF_SSC_SOURCE_DISABLE;
 
 		/* Turn off SSC1 */
-		temp &= ~ DREF_SSC1_ENABLE;
+		val &= ~DREF_SSC1_ENABLE;
 
-		I915_WRITE(PCH_DREF_CONTROL, temp);
+		I915_WRITE(PCH_DREF_CONTROL, val);
 		POSTING_READ(PCH_DREF_CONTROL);
 		udelay(200);
 	}
+
+	BUG_ON(val != final);
 }
 
 /* Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O. */
@@ -5164,7 +5116,7 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc,
 	val = I915_READ(PIPECONF(pipe));
 
 	val &= ~PIPECONF_BPC_MASK;
-	switch (intel_crtc->bpp) {
+	switch (intel_crtc->config.pipe_bpp) {
 	case 18:
 		val |= PIPECONF_6BPC;
 		break;
@@ -5192,7 +5144,7 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc,
 	else
 		val |= PIPECONF_PROGRESSIVE;
 
-	if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+	if (intel_crtc->config.limited_color_range)
 		val |= PIPECONF_COLOR_RANGE_SELECT;
 	else
 		val &= ~PIPECONF_COLOR_RANGE_SELECT;
@@ -5208,8 +5160,7 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc,
  * is supported, but eventually this should handle various
  * RGB<->YCbCr scenarios as well.
  */
-static void intel_set_pipe_csc(struct drm_crtc *crtc,
-			       const struct drm_display_mode *adjusted_mode)
+static void intel_set_pipe_csc(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5224,7 +5175,7 @@ static void intel_set_pipe_csc(struct drm_crtc *crtc,
 	 * consideration.
 	 */
 
-	if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+	if (intel_crtc->config.limited_color_range)
 		coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
 
 	/*
@@ -5248,7 +5199,7 @@ static void intel_set_pipe_csc(struct drm_crtc *crtc,
 	if (INTEL_INFO(dev)->gen > 6) {
 		uint16_t postoff = 0;
 
-		if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+		if (intel_crtc->config.limited_color_range)
 			postoff = (16 * (1 << 13) / 255) & 0x1fff;
 
 		I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
@@ -5259,7 +5210,7 @@ static void intel_set_pipe_csc(struct drm_crtc *crtc,
 	} else {
 		uint32_t mode = CSC_MODE_YUV_TO_RGB;
 
-		if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+		if (intel_crtc->config.limited_color_range)
 			mode |= CSC_BLACK_SCREEN_OFFSET;
 
 		I915_WRITE(PIPE_CSC_MODE(pipe), mode);
@@ -5349,7 +5300,7 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
 	}
 
 	if (is_sdvo && is_tv)
-		i9xx_adjust_sdvo_tv_clock(adjusted_mode, clock);
+		i9xx_adjust_sdvo_tv_clock(to_intel_crtc(crtc));
 
 	return true;
 }
@@ -5447,77 +5398,77 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
 	return bps / (link_bw * 8) + 1;
 }
 
-static void ironlake_set_m_n(struct drm_crtc *crtc,
-			     struct drm_display_mode *mode,
-			     struct drm_display_mode *adjusted_mode)
+void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
+				  struct intel_link_m_n *m_n)
 {
-	struct drm_device *dev = crtc->dev;
+	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
-	struct intel_encoder *intel_encoder, *edp_encoder = NULL;
-	struct intel_link_m_n m_n = {0};
-	int target_clock, pixel_multiplier, lane, link_bw;
-	bool is_dp = false, is_cpu_edp = false;
+	int pipe = crtc->pipe;
 
-	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
-		switch (intel_encoder->type) {
-		case INTEL_OUTPUT_DISPLAYPORT:
-			is_dp = true;
-			break;
-		case INTEL_OUTPUT_EDP:
-			is_dp = true;
-			if (!intel_encoder_is_pch_edp(&intel_encoder->base))
-				is_cpu_edp = true;
-			edp_encoder = intel_encoder;
-			break;
-		}
-	}
+	I915_WRITE(TRANSDATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
+	I915_WRITE(TRANSDATA_N1(pipe), m_n->gmch_n);
+	I915_WRITE(TRANSDPLINK_M1(pipe), m_n->link_m);
+	I915_WRITE(TRANSDPLINK_N1(pipe), m_n->link_n);
+}
 
-	/* FDI link */
-	pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-	lane = 0;
-	/* CPU eDP doesn't require FDI link, so just set DP M/N
-	   according to current link config */
-	if (is_cpu_edp) {
-		intel_edp_link_config(edp_encoder, &lane, &link_bw);
+void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
+				  struct intel_link_m_n *m_n)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe = crtc->pipe;
+	enum transcoder transcoder = crtc->cpu_transcoder;
+
+	if (INTEL_INFO(dev)->gen >= 5) {
+		I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
+		I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
+		I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
+		I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
 	} else {
-		/* FDI is a binary signal running at ~2.7GHz, encoding
-		 * each output octet as 10 bits. The actual frequency
-		 * is stored as a divider into a 100MHz clock, and the
-		 * mode pixel clock is stored in units of 1KHz.
-		 * Hence the bw of each lane in terms of the mode signal
-		 * is:
-		 */
-		link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+		I915_WRITE(PIPE_GMCH_DATA_M(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
+		I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n->gmch_n);
+		I915_WRITE(PIPE_DP_LINK_M(pipe), m_n->link_m);
+		I915_WRITE(PIPE_DP_LINK_N(pipe), m_n->link_n);
 	}
+}
+
+static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct intel_link_m_n m_n = {0};
+	int target_clock, lane, link_bw;
+
+	/* FDI is a binary signal running at ~2.7GHz, encoding
+	 * each output octet as 10 bits. The actual frequency
+	 * is stored as a divider into a 100MHz clock, and the
+	 * mode pixel clock is stored in units of 1KHz.
+	 * Hence the bw of each lane in terms of the mode signal
+	 * is:
+	 */
+	link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
 
-	/* [e]DP over FDI requires target mode clock instead of link clock. */
-	if (edp_encoder)
-		target_clock = intel_edp_target_clock(edp_encoder, mode);
-	else if (is_dp)
-		target_clock = mode->clock;
+	if (intel_crtc->config.pixel_target_clock)
+		target_clock = intel_crtc->config.pixel_target_clock;
 	else
 		target_clock = adjusted_mode->clock;
 
-	if (!lane)
-		lane = ironlake_get_lanes_required(target_clock, link_bw,
-						   intel_crtc->bpp);
+	lane = ironlake_get_lanes_required(target_clock, link_bw,
+					   intel_crtc->config.pipe_bpp);
 
 	intel_crtc->fdi_lanes = lane;
 
-	if (pixel_multiplier > 1)
-		link_bw *= pixel_multiplier;
-	intel_link_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n);
+	if (intel_crtc->config.pixel_multiplier > 1)
+		link_bw *= intel_crtc->config.pixel_multiplier;
+	intel_link_compute_m_n(intel_crtc->config.pipe_bpp, lane, target_clock,
+			       link_bw, &m_n);
 
-	I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
-	I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
-	I915_WRITE(PIPE_LINK_M1(cpu_transcoder), m_n.link_m);
-	I915_WRITE(PIPE_LINK_N1(cpu_transcoder), m_n.link_n);
+	intel_cpu_transcoder_set_m_n(intel_crtc, &m_n);
 }
 
 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
-				      struct drm_display_mode *adjusted_mode,
 				      intel_clock_t *clock, u32 fp)
 {
 	struct drm_crtc *crtc = &intel_crtc->base;
@@ -5525,9 +5476,8 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_encoder *intel_encoder;
 	uint32_t dpll;
-	int factor, pixel_multiplier, num_connectors = 0;
+	int factor, num_connectors = 0;
 	bool is_lvds = false, is_sdvo = false, is_tv = false;
-	bool is_dp = false, is_cpu_edp = false;
 
 	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
 		switch (intel_encoder->type) {
@@ -5543,14 +5493,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 		case INTEL_OUTPUT_TVOUT:
 			is_tv = true;
 			break;
-		case INTEL_OUTPUT_DISPLAYPORT:
-			is_dp = true;
-			break;
-		case INTEL_OUTPUT_EDP:
-			is_dp = true;
-			if (!intel_encoder_is_pch_edp(&intel_encoder->base))
-				is_cpu_edp = true;
-			break;
 		}
 
 		num_connectors++;
@@ -5576,13 +5518,14 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
 	if (is_sdvo) {
-		pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-		if (pixel_multiplier > 1) {
-			dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+		if (intel_crtc->config.pixel_multiplier > 1) {
+			dpll |= (intel_crtc->config.pixel_multiplier - 1)
+				<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
 		dpll |= DPLL_DVO_HIGH_SPEED;
 	}
-	if (is_dp && !is_cpu_edp)
+	if (intel_crtc->config.has_dp_encoder &&
+	    intel_crtc->config.has_pch_encoder)
 		dpll |= DPLL_DVO_HIGH_SPEED;
 
 	/* compute bitmask from p1 value */
@@ -5620,21 +5563,22 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 }
 
 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
-				  struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode,
 				  int x, int y,
 				  struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	int num_connectors = 0;
 	intel_clock_t clock, reduced_clock;
 	u32 dpll, fp = 0, fp2 = 0;
 	bool ok, has_reduced_clock = false;
-	bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+	bool is_lvds = false;
 	struct intel_encoder *encoder;
 	int ret;
 	bool dither, fdi_config_ok;
@@ -5644,14 +5588,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		case INTEL_OUTPUT_LVDS:
 			is_lvds = true;
 			break;
-		case INTEL_OUTPUT_DISPLAYPORT:
-			is_dp = true;
-			break;
-		case INTEL_OUTPUT_EDP:
-			is_dp = true;
-			if (!intel_encoder_is_pch_edp(&encoder->base))
-				is_cpu_edp = true;
-			break;
 		}
 
 		num_connectors++;
@@ -5660,19 +5596,28 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
 	     "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
 
+	intel_crtc->cpu_transcoder = pipe;
+
 	ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
 				     &has_reduced_clock, &reduced_clock);
 	if (!ok) {
 		DRM_ERROR("Couldn't find PLL settings for mode!\n");
 		return -EINVAL;
 	}
+	/* Compat-code for transition, will disappear. */
+	if (!intel_crtc->config.clock_set) {
+		intel_crtc->config.dpll.n = clock.n;
+		intel_crtc->config.dpll.m1 = clock.m1;
+		intel_crtc->config.dpll.m2 = clock.m2;
+		intel_crtc->config.dpll.p1 = clock.p1;
+		intel_crtc->config.dpll.p2 = clock.p2;
+	}
 
 	/* Ensure that the cursor is valid for the new mode before changing... */
 	intel_crtc_update_cursor(crtc, true);
 
 	/* determine panel color depth */
-	dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
-					      adjusted_mode);
+	dither = intel_crtc->config.dither;
 	if (is_lvds && dev_priv->lvds_dither)
 		dither = true;
 
@@ -5681,13 +5626,13 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
 			reduced_clock.m2;
 
-	dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
+	dpll = ironlake_compute_dpll(intel_crtc, &clock, fp);
 
 	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
 	drm_mode_debug_printmodeline(mode);
 
 	/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
-	if (!is_cpu_edp) {
+	if (intel_crtc->config.has_pch_encoder) {
 		struct intel_pch_pll *pll;
 
 		pll = intel_get_pch_pll(intel_crtc, dpll, fp);
@@ -5699,8 +5644,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	} else
 		intel_put_pch_pll(intel_crtc);
 
-	if (is_dp && !is_cpu_edp)
-		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	if (intel_crtc->config.has_dp_encoder)
+		intel_dp_set_m_n(intel_crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		if (encoder->pre_pll_enable)
@@ -5735,7 +5680,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Note, this also computes intel_crtc->fdi_lanes which is used below in
 	 * ironlake_check_fdi_lanes. */
-	ironlake_set_m_n(crtc, mode, adjusted_mode);
+	intel_crtc->fdi_lanes = 0;
+	if (intel_crtc->config.has_pch_encoder)
+		ironlake_fdi_set_m_n(crtc);
 
 	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
 
@@ -5756,6 +5703,23 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	return fdi_config_ok ? ret : -EINVAL;
 }
 
+static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
+				     struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = I915_READ(PIPECONF(crtc->pipe));
+	if (!(tmp & PIPECONF_ENABLE))
+		return false;
+
+	if (I915_READ(TRANSCONF(crtc->pipe)) & TRANS_ENABLE)
+		pipe_config->has_pch_encoder = true;
+
+	return true;
+}
+
 static void haswell_modeset_global_resources(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5786,29 +5750,26 @@ static void haswell_modeset_global_resources(struct drm_device *dev)
 }
 
 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
-				 struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode,
 				 int x, int y,
 				 struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	int num_connectors = 0;
-	bool is_dp = false, is_cpu_edp = false;
+	bool is_cpu_edp = false;
 	struct intel_encoder *encoder;
 	int ret;
 	bool dither;
 
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		switch (encoder->type) {
-		case INTEL_OUTPUT_DISPLAYPORT:
-			is_dp = true;
-			break;
 		case INTEL_OUTPUT_EDP:
-			is_dp = true;
 			if (!intel_encoder_is_pch_edp(&encoder->base))
 				is_cpu_edp = true;
 			break;
@@ -5841,25 +5802,24 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	intel_crtc_update_cursor(crtc, true);
 
 	/* determine panel color depth */
-	dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
-					      adjusted_mode);
+	dither = intel_crtc->config.dither;
 
 	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
 	drm_mode_debug_printmodeline(mode);
 
-	if (is_dp && !is_cpu_edp)
-		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	if (intel_crtc->config.has_dp_encoder)
+		intel_dp_set_m_n(intel_crtc);
 
 	intel_crtc->lowfreq_avail = false;
 
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
-	if (!is_dp || is_cpu_edp)
-		ironlake_set_m_n(crtc, mode, adjusted_mode);
+	if (intel_crtc->config.has_pch_encoder)
+		ironlake_fdi_set_m_n(crtc);
 
 	haswell_set_pipeconf(crtc, adjusted_mode, dither);
 
-	intel_set_pipe_csc(crtc, adjusted_mode);
+	intel_set_pipe_csc(crtc);
 
 	/* Set up the display plane register */
 	I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
@@ -5874,9 +5834,32 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	return ret;
 }
 
+static bool haswell_get_pipe_config(struct intel_crtc *crtc,
+				    struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = I915_READ(PIPECONF(crtc->cpu_transcoder));
+	if (!(tmp & PIPECONF_ENABLE))
+		return false;
+
+	/*
+	 * aswell has only FDI/PCH transcoder A. It is which is connected to
+	 * DDI E. So just check whether this pipe is wired to DDI E and whether
+	 * the PCH transcoder is on.
+	 */
+	tmp = I915_READ(TRANS_DDI_FUNC_CTL(crtc->pipe));
+	if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
+	    I915_READ(TRANSCONF(PIPE_A)) & TRANS_ENABLE)
+		pipe_config->has_pch_encoder = true;
+
+
+	return true;
+}
+
 static int intel_crtc_mode_set(struct drm_crtc *crtc,
-			       struct drm_display_mode *mode,
-			       struct drm_display_mode *adjusted_mode,
 			       int x, int y,
 			       struct drm_framebuffer *fb)
 {
@@ -5885,13 +5868,16 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	struct drm_encoder_helper_funcs *encoder_funcs;
 	struct intel_encoder *encoder;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	int pipe = intel_crtc->pipe;
 	int ret;
 
 	drm_vblank_pre_modeset(dev, pipe);
 
-	ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
-					      x, y, fb);
+	ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
+
 	drm_vblank_post_modeset(dev, pipe);
 
 	if (ret != 0)
@@ -5902,8 +5888,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			encoder->base.base.id,
 			drm_get_encoder_name(&encoder->base),
 			mode->base.id, mode->name);
-		encoder_funcs = encoder->base.helper_private;
-		encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+		if (encoder->mode_set) {
+			encoder->mode_set(encoder);
+		} else {
+			encoder_funcs = encoder->base.helper_private;
+			encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+		}
 	}
 
 	return 0;
@@ -6371,13 +6361,24 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	/* we only need to pin inside GTT if cursor is non-phy */
 	mutex_lock(&dev->struct_mutex);
 	if (!dev_priv->info->cursor_needs_physical) {
+		unsigned alignment;
+
 		if (obj->tiling_mode) {
 			DRM_ERROR("cursor cannot be tiled\n");
 			ret = -EINVAL;
 			goto fail_locked;
 		}
 
-		ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
+		/* Note that the w/a also requires 2 PTE of padding following
+		 * the bo. We currently fill all unused PTE with the shadow
+		 * page and so we should always have valid PTE following the
+		 * cursor preventing the VT-d warning.
+		 */
+		alignment = 0;
+		if (need_vtd_wa(dev))
+			alignment = 64*1024;
+
+		ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
 		if (ret) {
 			DRM_ERROR("failed to move cursor bo into the GTT\n");
 			goto fail_locked;
@@ -7502,19 +7503,93 @@ static void intel_modeset_commit_output_state(struct drm_device *dev)
 	}
 }
 
-static struct drm_display_mode *
-intel_modeset_adjusted_mode(struct drm_crtc *crtc,
-			    struct drm_display_mode *mode)
+static int
+pipe_config_set_bpp(struct drm_crtc *crtc,
+		    struct drm_framebuffer *fb,
+		    struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_connector *connector;
+	int bpp;
+
+	switch (fb->pixel_format) {
+	case DRM_FORMAT_C8:
+		bpp = 8*3; /* since we go through a colormap */
+		break;
+	case DRM_FORMAT_XRGB1555:
+	case DRM_FORMAT_ARGB1555:
+		/* checked in intel_framebuffer_init already */
+		if (WARN_ON(INTEL_INFO(dev)->gen > 3))
+			return -EINVAL;
+	case DRM_FORMAT_RGB565:
+		bpp = 6*3; /* min is 18bpp */
+		break;
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+		/* checked in intel_framebuffer_init already */
+		if (WARN_ON(INTEL_INFO(dev)->gen < 4))
+			return -EINVAL;
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+		bpp = 8*3;
+		break;
+	case DRM_FORMAT_XRGB2101010:
+	case DRM_FORMAT_ARGB2101010:
+	case DRM_FORMAT_XBGR2101010:
+	case DRM_FORMAT_ABGR2101010:
+		/* checked in intel_framebuffer_init already */
+		if (WARN_ON(INTEL_INFO(dev)->gen < 4))
+			return -EINVAL;
+		bpp = 10*3;
+		break;
+	/* TODO: gen4+ supports 16 bpc floating point, too. */
+	default:
+		DRM_DEBUG_KMS("unsupported depth\n");
+		return -EINVAL;
+	}
+
+	pipe_config->pipe_bpp = bpp;
+
+	/* Clamp display bpp to EDID value */
+	list_for_each_entry(connector, &dev->mode_config.connector_list,
+			    head) {
+		if (connector->encoder && connector->encoder->crtc != crtc)
+			continue;
+
+		/* Don't use an invalid EDID bpc value */
+		if (connector->display_info.bpc &&
+		    connector->display_info.bpc * 3 < bpp) {
+			DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
+				      bpp, connector->display_info.bpc*3);
+			pipe_config->pipe_bpp = connector->display_info.bpc*3;
+		}
+	}
+
+	return bpp;
+}
+
+static struct intel_crtc_config *
+intel_modeset_pipe_config(struct drm_crtc *crtc,
+			  struct drm_framebuffer *fb,
+			  struct drm_display_mode *mode)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_display_mode *adjusted_mode;
 	struct drm_encoder_helper_funcs *encoder_funcs;
 	struct intel_encoder *encoder;
+	struct intel_crtc_config *pipe_config;
+	int plane_bpp;
 
-	adjusted_mode = drm_mode_duplicate(dev, mode);
-	if (!adjusted_mode)
+	pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
+	if (!pipe_config)
 		return ERR_PTR(-ENOMEM);
 
+	drm_mode_copy(&pipe_config->adjusted_mode, mode);
+	drm_mode_copy(&pipe_config->requested_mode, mode);
+
+	plane_bpp = pipe_config_set_bpp(crtc, fb, pipe_config);
+	if (plane_bpp < 0)
+		goto fail;
+
 	/* Pass our mode to the connectors and the CRTC to give them a chance to
 	 * adjust it according to limitations or connector properties, and also
 	 * a chance to reject the mode entirely.
@@ -7524,23 +7599,38 @@ intel_modeset_adjusted_mode(struct drm_crtc *crtc,
 
 		if (&encoder->new_crtc->base != crtc)
 			continue;
+
+		if (encoder->compute_config) {
+			if (!(encoder->compute_config(encoder, pipe_config))) {
+				DRM_DEBUG_KMS("Encoder config failure\n");
+				goto fail;
+			}
+
+			continue;
+		}
+
 		encoder_funcs = encoder->base.helper_private;
-		if (!(encoder_funcs->mode_fixup(&encoder->base, mode,
-						adjusted_mode))) {
+		if (!(encoder_funcs->mode_fixup(&encoder->base,
+						&pipe_config->requested_mode,
+						&pipe_config->adjusted_mode))) {
 			DRM_DEBUG_KMS("Encoder fixup failed\n");
 			goto fail;
 		}
 	}
 
-	if (!(intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) {
+	if (!(intel_crtc_compute_config(crtc, pipe_config))) {
 		DRM_DEBUG_KMS("CRTC fixup failed\n");
 		goto fail;
 	}
 	DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
 
-	return adjusted_mode;
+	pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
+	DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
+		      plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
+
+	return pipe_config;
 fail:
-	drm_mode_destroy(dev, adjusted_mode);
+	kfree(pipe_config);
 	return ERR_PTR(-EINVAL);
 }
 
@@ -7702,12 +7792,29 @@ intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
 			    base.head) \
 		if (mask & (1 <<(intel_crtc)->pipe)) \
 
+static bool
+intel_pipe_config_compare(struct intel_crtc_config *current_config,
+			  struct intel_crtc_config *pipe_config)
+{
+	if (current_config->has_pch_encoder != pipe_config->has_pch_encoder) {
+		DRM_ERROR("mismatch in has_pch_encoder "
+			  "(expected %i, found %i)\n",
+			  current_config->has_pch_encoder,
+			  pipe_config->has_pch_encoder);
+		return false;
+	}
+
+	return true;
+}
+
 void
 intel_modeset_check_state(struct drm_device *dev)
 {
+	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_crtc *crtc;
 	struct intel_encoder *encoder;
 	struct intel_connector *connector;
+	struct intel_crtc_config pipe_config;
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list,
 			    base.head) {
@@ -7796,7 +7903,16 @@ intel_modeset_check_state(struct drm_device *dev)
 		     "crtc's computed enabled state doesn't match tracked enabled state "
 		     "(expected %i, found %i)\n", enabled, crtc->base.enabled);
 
-		assert_pipe(dev->dev_private, crtc->pipe, crtc->active);
+		memset(&pipe_config, 0, sizeof(pipe_config));
+		active = dev_priv->display.get_pipe_config(crtc,
+							   &pipe_config);
+		WARN(crtc->active != active,
+		     "crtc active state doesn't match with hw state "
+		     "(expected %i, found %i)\n", crtc->active, active);
+
+		WARN(active &&
+		     !intel_pipe_config_compare(&crtc->config, &pipe_config),
+		     "pipe state doesn't match!\n");
 	}
 }
 
@@ -7806,7 +7922,8 @@ int intel_set_mode(struct drm_crtc *crtc,
 {
 	struct drm_device *dev = crtc->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_display_mode *adjusted_mode, *saved_mode, *saved_hwmode;
+	struct drm_display_mode *saved_mode, *saved_hwmode;
+	struct intel_crtc_config *pipe_config = NULL;
 	struct intel_crtc *intel_crtc;
 	unsigned disable_pipes, prepare_pipes, modeset_pipes;
 	int ret = 0;
@@ -7819,12 +7936,6 @@ int intel_set_mode(struct drm_crtc *crtc,
 	intel_modeset_affected_pipes(crtc, &modeset_pipes,
 				     &prepare_pipes, &disable_pipes);
 
-	DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
-		      modeset_pipes, prepare_pipes, disable_pipes);
-
-	for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
-		intel_crtc_disable(&intel_crtc->base);
-
 	*saved_hwmode = crtc->hwmode;
 	*saved_mode = crtc->mode;
 
@@ -7833,15 +7944,22 @@ int intel_set_mode(struct drm_crtc *crtc,
 	 * Hence simply check whether any bit is set in modeset_pipes in all the
 	 * pieces of code that are not yet converted to deal with mutliple crtcs
 	 * changing their mode at the same time. */
-	adjusted_mode = NULL;
 	if (modeset_pipes) {
-		adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
-		if (IS_ERR(adjusted_mode)) {
-			ret = PTR_ERR(adjusted_mode);
+		pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
+		if (IS_ERR(pipe_config)) {
+			ret = PTR_ERR(pipe_config);
+			pipe_config = NULL;
+
 			goto out;
 		}
 	}
 
+	DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
+		      modeset_pipes, prepare_pipes, disable_pipes);
+
+	for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
+		intel_crtc_disable(&intel_crtc->base);
+
 	for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
 		if (intel_crtc->base.enabled)
 			dev_priv->display.crtc_disable(&intel_crtc->base);
@@ -7850,8 +7968,12 @@ int intel_set_mode(struct drm_crtc *crtc,
 	/* crtc->mode is already used by the ->mode_set callbacks, hence we need
 	 * to set it here already despite that we pass it down the callchain.
 	 */
-	if (modeset_pipes)
+	if (modeset_pipes) {
 		crtc->mode = *mode;
+		/* mode_set/enable/disable functions rely on a correct pipe
+		 * config. */
+		to_intel_crtc(crtc)->config = *pipe_config;
+	}
 
 	/* Only after disabling all output pipelines that will be changed can we
 	 * update the the output configuration. */
@@ -7865,7 +7987,6 @@ int intel_set_mode(struct drm_crtc *crtc,
 	 */
 	for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
 		ret = intel_crtc_mode_set(&intel_crtc->base,
-					  mode, adjusted_mode,
 					  x, y, fb);
 		if (ret)
 			goto done;
@@ -7877,7 +7998,7 @@ int intel_set_mode(struct drm_crtc *crtc,
 
 	if (modeset_pipes) {
 		/* Store real post-adjustment hardware mode. */
-		crtc->hwmode = *adjusted_mode;
+		crtc->hwmode = pipe_config->adjusted_mode;
 
 		/* Calculate and store various constants which
 		 * are later needed by vblank and swap-completion
@@ -7888,7 +8009,6 @@ int intel_set_mode(struct drm_crtc *crtc,
 
 	/* FIXME: add subpixel order */
 done:
-	drm_mode_destroy(dev, adjusted_mode);
 	if (ret && crtc->enabled) {
 		crtc->hwmode = *saved_hwmode;
 		crtc->mode = *saved_mode;
@@ -7897,6 +8017,7 @@ done:
 	}
 
 out:
+	kfree(pipe_config);
 	kfree(saved_mode);
 	return ret;
 }
@@ -7988,10 +8109,8 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
 			config->mode_changed = true;
 		} else if (set->fb == NULL) {
 			config->mode_changed = true;
-		} else if (set->fb->depth != set->crtc->fb->depth) {
-			config->mode_changed = true;
-		} else if (set->fb->bits_per_pixel !=
-			   set->crtc->fb->bits_per_pixel) {
+		} else if (set->fb->pixel_format !=
+			   set->crtc->fb->pixel_format) {
 			config->mode_changed = true;
 		} else
 			config->fb_changed = true;
@@ -8263,8 +8382,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
 	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
 
-	intel_crtc->bpp = 24; /* default for pre-Ironlake */
-
 	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
 }
 
@@ -8601,18 +8718,21 @@ static void intel_init_display(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	if (HAS_DDI(dev)) {
+		dev_priv->display.get_pipe_config = haswell_get_pipe_config;
 		dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
 		dev_priv->display.crtc_enable = haswell_crtc_enable;
 		dev_priv->display.crtc_disable = haswell_crtc_disable;
 		dev_priv->display.off = haswell_crtc_off;
 		dev_priv->display.update_plane = ironlake_update_plane;
 	} else if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
 		dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
 		dev_priv->display.crtc_enable = ironlake_crtc_enable;
 		dev_priv->display.crtc_disable = ironlake_crtc_disable;
 		dev_priv->display.off = ironlake_crtc_off;
 		dev_priv->display.update_plane = ironlake_update_plane;
 	} else {
+		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
 		dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
 		dev_priv->display.crtc_enable = i9xx_crtc_enable;
 		dev_priv->display.crtc_disable = i9xx_crtc_disable;
@@ -8855,7 +8975,7 @@ void intel_modeset_init_hw(struct drm_device *dev)
 void intel_modeset_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int i, ret;
+	int i, j, ret;
 
 	drm_mode_config_init(dev);
 
@@ -8891,9 +9011,12 @@ void intel_modeset_init(struct drm_device *dev)
 
 	for (i = 0; i < INTEL_INFO(dev)->num_pipes; i++) {
 		intel_crtc_init(dev, i);
-		ret = intel_plane_init(dev, i);
-		if (ret)
-			DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
+		for (j = 0; j < dev_priv->num_plane; j++) {
+			ret = intel_plane_init(dev, i, j);
+			if (ret)
+				DRM_DEBUG_KMS("pipe %d plane %d init failed: %d\n",
+					      i, j, ret);
+		}
 	}
 
 	intel_cpu_pll_init(dev);
@@ -9106,6 +9229,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum pipe pipe;
 	u32 tmp;
+	struct drm_plane *plane;
 	struct intel_crtc *crtc;
 	struct intel_encoder *encoder;
 	struct intel_connector *connector;
@@ -9125,6 +9249,13 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 			case TRANS_DDI_EDP_INPUT_C_ONOFF:
 				pipe = PIPE_C;
 				break;
+			default:
+				/* A bogus value has been programmed, disable
+				 * the transcoder */
+				WARN(1, "Bogus eDP source %08x\n", tmp);
+				intel_ddi_disable_transcoder_func(dev_priv,
+						TRANSCODER_EDP);
+				goto setup_pipes;
 			}
 
 			crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
@@ -9135,14 +9266,12 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 		}
 	}
 
-	for_each_pipe(pipe) {
-		crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
-
-		tmp = I915_READ(PIPECONF(crtc->cpu_transcoder));
-		if (tmp & PIPECONF_ENABLE)
-			crtc->active = true;
-		else
-			crtc->active = false;
+setup_pipes:
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+			    base.head) {
+		memset(&crtc->config, 0, sizeof(crtc->config));
+		crtc->active = dev_priv->display.get_pipe_config(crtc,
+								 &crtc->config);
 
 		crtc->base.enabled = crtc->active;
 
@@ -9202,8 +9331,12 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 
 	if (force_restore) {
 		for_each_pipe(pipe) {
-			intel_crtc_restore_mode(dev_priv->pipe_to_crtc_mapping[pipe]);
+			struct drm_crtc *crtc =
+				dev_priv->pipe_to_crtc_mapping[pipe];
+			intel_crtc_restore_mode(crtc);
 		}
+		list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+			intel_plane_restore(plane);
 
 		i915_redisable_vga(dev);
 	} else {
@@ -9364,9 +9497,10 @@ intel_display_capture_error_state(struct drm_device *dev)
 
 		error->plane[i].control = I915_READ(DSPCNTR(i));
 		error->plane[i].stride = I915_READ(DSPSTRIDE(i));
-		if (INTEL_INFO(dev)->gen <= 3)
+		if (INTEL_INFO(dev)->gen <= 3) {
 			error->plane[i].size = I915_READ(DSPSIZE(i));
-		error->plane[i].pos = I915_READ(DSPPOS(i));
+			error->plane[i].pos = I915_READ(DSPPOS(i));
+		}
 		if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
 			error->plane[i].addr = I915_READ(DSPADDR(i));
 		if (INTEL_INFO(dev)->gen >= 4) {
@@ -9409,10 +9543,11 @@ intel_display_print_error_state(struct seq_file *m,
 		seq_printf(m, "Plane [%d]:\n", i);
 		seq_printf(m, "  CNTR: %08x\n", error->plane[i].control);
 		seq_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
-		if (INTEL_INFO(dev)->gen <= 3)
+		if (INTEL_INFO(dev)->gen <= 3) {
 			seq_printf(m, "  SIZE: %08x\n", error->plane[i].size);
-		seq_printf(m, "  POS: %08x\n", error->plane[i].pos);
-		if (!IS_HASWELL(dev))
+			seq_printf(m, "  POS: %08x\n", error->plane[i].pos);
+		}
+		if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
 			seq_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
 		if (INTEL_INFO(dev)->gen >= 4) {
 			seq_printf(m, "  SURF: %08x\n", error->plane[i].surface);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index fe111f1aadb..b30e82b9843 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -109,29 +109,6 @@ bool intel_encoder_is_pch_edp(struct drm_encoder *encoder)
 
 static void intel_dp_link_down(struct intel_dp *intel_dp);
 
-void
-intel_edp_link_config(struct intel_encoder *intel_encoder,
-		       int *lane_num, int *link_bw)
-{
-	struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
-
-	*lane_num = intel_dp->lane_count;
-	*link_bw = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
-}
-
-int
-intel_edp_target_clock(struct intel_encoder *intel_encoder,
-		       struct drm_display_mode *mode)
-{
-	struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
-	struct intel_connector *intel_connector = intel_dp->attached_connector;
-
-	if (intel_connector->panel.fixed_mode)
-		return intel_connector->panel.fixed_mode->clock;
-	else
-		return mode->clock;
-}
-
 static int
 intel_dp_max_link_bw(struct intel_dp *intel_dp)
 {
@@ -177,34 +154,6 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
 	return (max_link_clock * max_lanes * 8) / 10;
 }
 
-static bool
-intel_dp_adjust_dithering(struct intel_dp *intel_dp,
-			  struct drm_display_mode *mode,
-			  bool adjust_mode)
-{
-	int max_link_clock =
-		drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
-	int max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
-	int max_rate, mode_rate;
-
-	mode_rate = intel_dp_link_required(mode->clock, 24);
-	max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
-
-	if (mode_rate > max_rate) {
-		mode_rate = intel_dp_link_required(mode->clock, 18);
-		if (mode_rate > max_rate)
-			return false;
-
-		if (adjust_mode)
-			mode->private_flags
-				|= INTEL_MODE_DP_FORCE_6BPC;
-
-		return true;
-	}
-
-	return true;
-}
-
 static int
 intel_dp_mode_valid(struct drm_connector *connector,
 		    struct drm_display_mode *mode)
@@ -212,6 +161,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
 	struct intel_connector *intel_connector = to_intel_connector(connector);
 	struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
+	int target_clock = mode->clock;
+	int max_rate, mode_rate, max_lanes, max_link_clock;
 
 	if (is_edp(intel_dp) && fixed_mode) {
 		if (mode->hdisplay > fixed_mode->hdisplay)
@@ -219,9 +170,17 @@ intel_dp_mode_valid(struct drm_connector *connector,
 
 		if (mode->vdisplay > fixed_mode->vdisplay)
 			return MODE_PANEL;
+
+		target_clock = fixed_mode->clock;
 	}
 
-	if (!intel_dp_adjust_dithering(intel_dp, mode, false))
+	max_link_clock = drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
+	max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
+
+	max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
+	mode_rate = intel_dp_link_required(target_clock, 18);
+
+	if (mode_rate > max_rate)
 		return MODE_CLOCK_HIGH;
 
 	if (mode->clock < 10000)
@@ -294,16 +253,20 @@ static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_stat_reg;
 
-	return (I915_READ(PCH_PP_STATUS) & PP_ON) != 0;
+	pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+	return (I915_READ(pp_stat_reg) & PP_ON) != 0;
 }
 
 static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_ctrl_reg;
 
-	return (I915_READ(PCH_PP_CONTROL) & EDP_FORCE_VDD) != 0;
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+	return (I915_READ(pp_ctrl_reg) & EDP_FORCE_VDD) != 0;
 }
 
 static void
@@ -311,14 +274,19 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_stat_reg, pp_ctrl_reg;
 
 	if (!is_edp(intel_dp))
 		return;
+
+	pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
 	if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) {
 		WARN(1, "eDP powered off while attempting aux channel communication.\n");
 		DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
-			      I915_READ(PCH_PP_STATUS),
-			      I915_READ(PCH_PP_CONTROL));
+				I915_READ(pp_stat_reg),
+				I915_READ(pp_ctrl_reg));
 	}
 }
 
@@ -689,18 +657,26 @@ intel_dp_i2c_init(struct intel_dp *intel_dp,
 }
 
 bool
-intel_dp_mode_fixup(struct drm_encoder *encoder,
-		    const struct drm_display_mode *mode,
-		    struct drm_display_mode *adjusted_mode)
+intel_dp_compute_config(struct intel_encoder *encoder,
+			struct intel_crtc_config *pipe_config)
 {
-	struct drm_device *dev = encoder->dev;
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+	struct drm_display_mode *mode = &pipe_config->requested_mode;
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	int lane_count, clock;
 	int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
 	int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
 	int bpp, mode_rate;
 	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+	int target_clock, link_avail, link_clock;
+
+	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && !is_cpu_edp(intel_dp))
+		pipe_config->has_pch_encoder = true;
+
+	pipe_config->has_dp_encoder = true;
 
 	if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
 		intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
@@ -709,6 +685,8 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
 					intel_connector->panel.fitting_mode,
 					mode, adjusted_mode);
 	}
+	/* We need to take the panel's fixed mode into account. */
+	target_clock = adjusted_mode->clock;
 
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
 		return false;
@@ -717,11 +695,28 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
 		      "max bw %02x pixel clock %iKHz\n",
 		      max_lane_count, bws[max_clock], adjusted_mode->clock);
 
-	if (!intel_dp_adjust_dithering(intel_dp, adjusted_mode, true))
-		return false;
+	/* Walk through all bpp values. Luckily they're all nicely spaced with 2
+	 * bpc in between. */
+	bpp = min_t(int, 8*3, pipe_config->pipe_bpp);
+	for (; bpp >= 6*3; bpp -= 2*3) {
+		mode_rate = intel_dp_link_required(target_clock, bpp);
+
+		for (clock = 0; clock <= max_clock; clock++) {
+			for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+				link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
+				link_avail = intel_dp_max_data_rate(link_clock,
+								    lane_count);
+
+				if (mode_rate <= link_avail) {
+					goto found;
+				}
+			}
+		}
+	}
 
-	bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+	return false;
 
+found:
 	if (intel_dp->color_range_auto) {
 		/*
 		 * See:
@@ -735,104 +730,38 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
 	}
 
 	if (intel_dp->color_range)
-		adjusted_mode->private_flags |= INTEL_MODE_LIMITED_COLOR_RANGE;
-
-	mode_rate = intel_dp_link_required(adjusted_mode->clock, bpp);
-
-	for (clock = 0; clock <= max_clock; clock++) {
-		for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
-			int link_bw_clock =
-				drm_dp_bw_code_to_link_rate(bws[clock]);
-			int link_avail = intel_dp_max_data_rate(link_bw_clock,
-								lane_count);
-
-			if (mode_rate <= link_avail) {
-				intel_dp->link_bw = bws[clock];
-				intel_dp->lane_count = lane_count;
-				adjusted_mode->clock = link_bw_clock;
-				DRM_DEBUG_KMS("DP link bw %02x lane "
-						"count %d clock %d bpp %d\n",
-				       intel_dp->link_bw, intel_dp->lane_count,
-				       adjusted_mode->clock, bpp);
-				DRM_DEBUG_KMS("DP link bw required %i available %i\n",
-					      mode_rate, link_avail);
-				return true;
-			}
-		}
-	}
+		pipe_config->limited_color_range = true;
 
-	return false;
-}
+	intel_dp->link_bw = bws[clock];
+	intel_dp->lane_count = lane_count;
+	adjusted_mode->clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
+	pipe_config->pixel_target_clock = target_clock;
 
-void
-intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
-		 struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = crtc->dev;
-	struct intel_encoder *intel_encoder;
-	struct intel_dp *intel_dp;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int lane_count = 4;
-	struct intel_link_m_n m_n;
-	int pipe = intel_crtc->pipe;
-	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
-	int target_clock;
-
-	/*
-	 * Find the lane count in the intel_encoder private
-	 */
-	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
-		intel_dp = enc_to_intel_dp(&intel_encoder->base);
+	DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
+		      intel_dp->link_bw, intel_dp->lane_count,
+		      adjusted_mode->clock, bpp);
+	DRM_DEBUG_KMS("DP link bw required %i available %i\n",
+		      mode_rate, link_avail);
 
-		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
-		    intel_encoder->type == INTEL_OUTPUT_EDP)
-		{
-			lane_count = intel_dp->lane_count;
-			break;
-		}
-	}
-
-	target_clock = mode->clock;
-	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
-		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
-			target_clock = intel_edp_target_clock(intel_encoder,
-							      mode);
-			break;
-		}
-	}
+	intel_link_compute_m_n(bpp, lane_count,
+			       target_clock, adjusted_mode->clock,
+			       &pipe_config->dp_m_n);
 
 	/*
-	 * Compute the GMCH and Link ratios. The '3' here is
-	 * the number of bytes_per_pixel post-LUT, which we always
-	 * set up for 8-bits of R/G/B, or 3 bytes total.
+	 * XXX: We have a strange regression where using the vbt edp bpp value
+	 * for the link bw computation results in black screens, the panel only
+	 * works when we do the computation at the usual 24bpp (but still
+	 * requires us to use 18bpp). Until that's fully debugged, stay
+	 * bug-for-bug compatible with the old code.
 	 */
-	intel_link_compute_m_n(intel_crtc->bpp, lane_count,
-			       target_clock, adjusted_mode->clock, &m_n);
-
-	if (HAS_DDI(dev)) {
-		I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
-			   TU_SIZE(m_n.tu) | m_n.gmch_m);
-		I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
-		I915_WRITE(PIPE_LINK_M1(cpu_transcoder), m_n.link_m);
-		I915_WRITE(PIPE_LINK_N1(cpu_transcoder), m_n.link_n);
-	} else if (HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(TRANSDATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
-		I915_WRITE(TRANSDATA_N1(pipe), m_n.gmch_n);
-		I915_WRITE(TRANSDPLINK_M1(pipe), m_n.link_m);
-		I915_WRITE(TRANSDPLINK_N1(pipe), m_n.link_n);
-	} else if (IS_VALLEYVIEW(dev)) {
-		I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
-		I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
-		I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
-		I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
-	} else {
-		I915_WRITE(PIPE_GMCH_DATA_M(pipe),
-			   TU_SIZE(m_n.tu) | m_n.gmch_m);
-		I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n.gmch_n);
-		I915_WRITE(PIPE_DP_LINK_M(pipe), m_n.link_m);
-		I915_WRITE(PIPE_DP_LINK_N(pipe), m_n.link_n);
+	if (is_edp(intel_dp) && dev_priv->edp.bpp) {
+		DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n",
+			      bpp, dev_priv->edp.bpp);
+		bpp = min_t(int, bpp, dev_priv->edp.bpp);
 	}
+	pipe_config->pipe_bpp = bpp;
+
+	return true;
 }
 
 void intel_dp_init_link_config(struct intel_dp *intel_dp)
@@ -951,7 +880,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		else
 			intel_dp->DP |= DP_PLL_FREQ_270MHZ;
 	} else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
-		if (!HAS_PCH_SPLIT(dev))
+		if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev))
 			intel_dp->DP |= intel_dp->color_range;
 
 		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
@@ -966,7 +895,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		if (intel_crtc->pipe == 1)
 			intel_dp->DP |= DP_PIPEB_SELECT;
 
-		if (is_cpu_edp(intel_dp)) {
+		if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
 			/* don't miss out required setting for eDP */
 			if (adjusted_mode->clock < 200000)
 				intel_dp->DP |= DP_PLL_FREQ_160MHZ;
@@ -996,16 +925,20 @@ static void ironlake_wait_panel_status(struct intel_dp *intel_dp,
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_stat_reg, pp_ctrl_reg;
+
+	pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
 
 	DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
-		      mask, value,
-		      I915_READ(PCH_PP_STATUS),
-		      I915_READ(PCH_PP_CONTROL));
+			mask, value,
+			I915_READ(pp_stat_reg),
+			I915_READ(pp_ctrl_reg));
 
-	if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) {
+	if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, 5000, 10)) {
 		DRM_ERROR("Panel status timeout: status %08x control %08x\n",
-			  I915_READ(PCH_PP_STATUS),
-			  I915_READ(PCH_PP_CONTROL));
+				I915_READ(pp_stat_reg),
+				I915_READ(pp_ctrl_reg));
 	}
 }
 
@@ -1032,9 +965,15 @@ static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
  * is locked
  */
 
-static  u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv)
+static  u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
 {
-	u32	control = I915_READ(PCH_PP_CONTROL);
+	struct drm_device *dev = intel_dp_to_dev(intel_dp);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 control;
+	u32 pp_ctrl_reg;
+
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+	control = I915_READ(pp_ctrl_reg);
 
 	control &= ~PANEL_UNLOCK_MASK;
 	control |= PANEL_UNLOCK_REGS;
@@ -1046,6 +985,7 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 pp;
+	u32 pp_stat_reg, pp_ctrl_reg;
 
 	if (!is_edp(intel_dp))
 		return;
@@ -1064,13 +1004,16 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
 	if (!ironlake_edp_have_panel_power(intel_dp))
 		ironlake_wait_panel_power_cycle(intel_dp);
 
-	pp = ironlake_get_pp_control(dev_priv);
+	pp = ironlake_get_pp_control(intel_dp);
 	pp |= EDP_FORCE_VDD;
-	I915_WRITE(PCH_PP_CONTROL, pp);
-	POSTING_READ(PCH_PP_CONTROL);
-	DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
-		      I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
 
+	pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+	I915_WRITE(pp_ctrl_reg, pp);
+	POSTING_READ(pp_ctrl_reg);
+	DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
+			I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
 	/*
 	 * If the panel wasn't on, delay before accessing aux channel
 	 */
@@ -1085,19 +1028,23 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 pp;
+	u32 pp_stat_reg, pp_ctrl_reg;
 
 	WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
 
 	if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) {
-		pp = ironlake_get_pp_control(dev_priv);
+		pp = ironlake_get_pp_control(intel_dp);
 		pp &= ~EDP_FORCE_VDD;
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
 
-		/* Make sure sequencer is idle before allowing subsequent activity */
-		DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
-			      I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
+		pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+		pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+		I915_WRITE(pp_ctrl_reg, pp);
+		POSTING_READ(pp_ctrl_reg);
 
+		/* Make sure sequencer is idle before allowing subsequent activity */
+		DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
+		I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
 		msleep(intel_dp->panel_power_down_delay);
 	}
 }
@@ -1141,6 +1088,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 pp;
+	u32 pp_ctrl_reg;
 
 	if (!is_edp(intel_dp))
 		return;
@@ -1154,7 +1102,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
 
 	ironlake_wait_panel_power_cycle(intel_dp);
 
-	pp = ironlake_get_pp_control(dev_priv);
+	pp = ironlake_get_pp_control(intel_dp);
 	if (IS_GEN5(dev)) {
 		/* ILK workaround: disable reset around power sequence */
 		pp &= ~PANEL_POWER_RESET;
@@ -1166,8 +1114,10 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
 	if (!IS_GEN5(dev))
 		pp |= PANEL_POWER_RESET;
 
-	I915_WRITE(PCH_PP_CONTROL, pp);
-	POSTING_READ(PCH_PP_CONTROL);
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+	I915_WRITE(pp_ctrl_reg, pp);
+	POSTING_READ(pp_ctrl_reg);
 
 	ironlake_wait_panel_on(intel_dp);
 
@@ -1183,6 +1133,7 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 pp;
+	u32 pp_ctrl_reg;
 
 	if (!is_edp(intel_dp))
 		return;
@@ -1191,12 +1142,15 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
 
 	WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
 
-	pp = ironlake_get_pp_control(dev_priv);
+	pp = ironlake_get_pp_control(intel_dp);
 	/* We need to switch off panel power _and_ force vdd, for otherwise some
 	 * panels get very unhappy and cease to work. */
 	pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE);
-	I915_WRITE(PCH_PP_CONTROL, pp);
-	POSTING_READ(PCH_PP_CONTROL);
+
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+	I915_WRITE(pp_ctrl_reg, pp);
+	POSTING_READ(pp_ctrl_reg);
 
 	intel_dp->want_panel_vdd = false;
 
@@ -1210,6 +1164,7 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int pipe = to_intel_crtc(intel_dig_port->base.base.crtc)->pipe;
 	u32 pp;
+	u32 pp_ctrl_reg;
 
 	if (!is_edp(intel_dp))
 		return;
@@ -1222,10 +1177,13 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
 	 * allowing it to appear.
 	 */
 	msleep(intel_dp->backlight_on_delay);
-	pp = ironlake_get_pp_control(dev_priv);
+	pp = ironlake_get_pp_control(intel_dp);
 	pp |= EDP_BLC_ENABLE;
-	I915_WRITE(PCH_PP_CONTROL, pp);
-	POSTING_READ(PCH_PP_CONTROL);
+
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+	I915_WRITE(pp_ctrl_reg, pp);
+	POSTING_READ(pp_ctrl_reg);
 
 	intel_panel_enable_backlight(dev, pipe);
 }
@@ -1235,6 +1193,7 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 pp;
+	u32 pp_ctrl_reg;
 
 	if (!is_edp(intel_dp))
 		return;
@@ -1242,10 +1201,13 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
 	intel_panel_disable_backlight(dev);
 
 	DRM_DEBUG_KMS("\n");
-	pp = ironlake_get_pp_control(dev_priv);
+	pp = ironlake_get_pp_control(intel_dp);
 	pp &= ~EDP_BLC_ENABLE;
-	I915_WRITE(PCH_PP_CONTROL, pp);
-	POSTING_READ(PCH_PP_CONTROL);
+
+	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+	I915_WRITE(pp_ctrl_reg, pp);
+	POSTING_READ(pp_ctrl_reg);
 	msleep(intel_dp->backlight_off_delay);
 }
 
@@ -1398,10 +1360,12 @@ static void intel_disable_dp(struct intel_encoder *encoder)
 static void intel_post_disable_dp(struct intel_encoder *encoder)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
 
 	if (is_cpu_edp(intel_dp)) {
 		intel_dp_link_down(intel_dp);
-		ironlake_edp_pll_off(intel_dp);
+		if (!IS_VALLEYVIEW(dev))
+			ironlake_edp_pll_off(intel_dp);
 	}
 }
 
@@ -1427,8 +1391,9 @@ static void intel_enable_dp(struct intel_encoder *encoder)
 static void intel_pre_enable_dp(struct intel_encoder *encoder)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
 
-	if (is_cpu_edp(intel_dp))
+	if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev))
 		ironlake_edp_pll_on(intel_dp);
 }
 
@@ -2540,7 +2505,6 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder)
 }
 
 static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
-	.mode_fixup = intel_dp_mode_fixup,
 	.mode_set = intel_dp_mode_set,
 };
 
@@ -2636,15 +2600,28 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct edp_power_seq cur, vbt, spec, final;
 	u32 pp_on, pp_off, pp_div, pp;
+	int pp_control_reg, pp_on_reg, pp_off_reg, pp_div_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		pp_control_reg = PCH_PP_CONTROL;
+		pp_on_reg = PCH_PP_ON_DELAYS;
+		pp_off_reg = PCH_PP_OFF_DELAYS;
+		pp_div_reg = PCH_PP_DIVISOR;
+	} else {
+		pp_control_reg = PIPEA_PP_CONTROL;
+		pp_on_reg = PIPEA_PP_ON_DELAYS;
+		pp_off_reg = PIPEA_PP_OFF_DELAYS;
+		pp_div_reg = PIPEA_PP_DIVISOR;
+	}
 
 	/* Workaround: Need to write PP_CONTROL with the unlock key as
 	 * the very first thing. */
-	pp = ironlake_get_pp_control(dev_priv);
-	I915_WRITE(PCH_PP_CONTROL, pp);
+	pp = ironlake_get_pp_control(intel_dp);
+	I915_WRITE(pp_control_reg, pp);
 
-	pp_on = I915_READ(PCH_PP_ON_DELAYS);
-	pp_off = I915_READ(PCH_PP_OFF_DELAYS);
-	pp_div = I915_READ(PCH_PP_DIVISOR);
+	pp_on = I915_READ(pp_on_reg);
+	pp_off = I915_READ(pp_off_reg);
+	pp_div = I915_READ(pp_div_reg);
 
 	/* Pull timing values out of registers */
 	cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
@@ -2719,7 +2696,22 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 					      struct edp_power_seq *seq)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 pp_on, pp_off, pp_div;
+	u32 pp_on, pp_off, pp_div, port_sel = 0;
+	int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
+	int pp_on_reg, pp_off_reg, pp_div_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		pp_on_reg = PCH_PP_ON_DELAYS;
+		pp_off_reg = PCH_PP_OFF_DELAYS;
+		pp_div_reg = PCH_PP_DIVISOR;
+	} else {
+		pp_on_reg = PIPEA_PP_ON_DELAYS;
+		pp_off_reg = PIPEA_PP_OFF_DELAYS;
+		pp_div_reg = PIPEA_PP_DIVISOR;
+	}
+
+	if (IS_VALLEYVIEW(dev))
+		port_sel = I915_READ(pp_on_reg) & 0xc0000000;
 
 	/* And finally store the new values in the power sequencer. */
 	pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
@@ -2728,8 +2720,7 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 		 (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
 	/* Compute the divisor for the pp clock, simply match the Bspec
 	 * formula. */
-	pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1)
-			<< PP_REFERENCE_DIVIDER_SHIFT;
+	pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
 	pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
 			<< PANEL_POWER_CYCLE_DELAY_SHIFT);
 
@@ -2737,19 +2728,21 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 	 * power sequencer any more. */
 	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
 		if (is_cpu_edp(intel_dp))
-			pp_on |= PANEL_POWER_PORT_DP_A;
+			port_sel = PANEL_POWER_PORT_DP_A;
 		else
-			pp_on |= PANEL_POWER_PORT_DP_D;
+			port_sel = PANEL_POWER_PORT_DP_D;
 	}
 
-	I915_WRITE(PCH_PP_ON_DELAYS, pp_on);
-	I915_WRITE(PCH_PP_OFF_DELAYS, pp_off);
-	I915_WRITE(PCH_PP_DIVISOR, pp_div);
+	pp_on |= port_sel;
+
+	I915_WRITE(pp_on_reg, pp_on);
+	I915_WRITE(pp_off_reg, pp_off);
+	I915_WRITE(pp_div_reg, pp_div);
 
 	DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
-		      I915_READ(PCH_PP_ON_DELAYS),
-		      I915_READ(PCH_PP_OFF_DELAYS),
-		      I915_READ(PCH_PP_DIVISOR));
+		      I915_READ(pp_on_reg),
+		      I915_READ(pp_off_reg),
+		      I915_READ(pp_div_reg));
 }
 
 void
@@ -2834,23 +2827,23 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	/* Set up the DDC bus. */
 	switch (port) {
 	case PORT_A:
+		intel_encoder->hpd_pin = HPD_PORT_A;
 		name = "DPDDC-A";
 		break;
 	case PORT_B:
-		dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_B;
 		name = "DPDDC-B";
 		break;
 	case PORT_C:
-		dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_C;
 		name = "DPDDC-C";
 		break;
 	case PORT_D:
-		dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_D;
 		name = "DPDDC-D";
 		break;
 	default:
-		WARN(1, "Invalid port %c\n", port_name(port));
-		break;
+		BUG();
 	}
 
 	if (is_edp(intel_dp))
@@ -2960,6 +2953,7 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 			 DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(&intel_encoder->base, &intel_dp_helper_funcs);
 
+	intel_encoder->compute_config = intel_dp_compute_config;
 	intel_encoder->enable = intel_enable_dp;
 	intel_encoder->pre_enable = intel_pre_enable_dp;
 	intel_encoder->disable = intel_disable_dp;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index e6f84d0db03..d7bd031dd64 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -33,12 +33,21 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_dp_helper.h>
 
+/**
+ * _wait_for - magic (register) wait macro
+ *
+ * Does the right thing for modeset paths when run under kdgb or similar atomic
+ * contexts. Note that it's important that we check the condition again after
+ * having timed out, since the timeout could be due to preemption or similar and
+ * we've never had a chance to check the condition before the timeout.
+ */
 #define _wait_for(COND, MS, W) ({ \
-	unsigned long timeout__ = jiffies + msecs_to_jiffies(MS);	\
+	unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1;	\
 	int ret__ = 0;							\
 	while (!(COND)) {						\
 		if (time_after(jiffies, timeout__)) {			\
-			ret__ = -ETIMEDOUT;				\
+			if (!(COND))					\
+				ret__ = -ETIMEDOUT;			\
 			break;						\
 		}							\
 		if (W && drm_can_sleep())  {				\
@@ -50,21 +59,10 @@
 	ret__;								\
 })
 
-#define wait_for_atomic_us(COND, US) ({ \
-	unsigned long timeout__ = jiffies + usecs_to_jiffies(US);	\
-	int ret__ = 0;							\
-	while (!(COND)) {						\
-		if (time_after(jiffies, timeout__)) {			\
-			ret__ = -ETIMEDOUT;				\
-			break;						\
-		}							\
-		cpu_relax();						\
-	}								\
-	ret__;								\
-})
-
 #define wait_for(COND, MS) _wait_for(COND, MS, 1)
 #define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
+#define wait_for_atomic_us(COND, US) _wait_for((COND), \
+					       DIV_ROUND_UP((US), 1000), 0)
 
 #define KHz(x) (1000*x)
 #define MHz(x) KHz(1000*x)
@@ -101,34 +99,6 @@
 #define INTEL_DVO_CHIP_TMDS 2
 #define INTEL_DVO_CHIP_TVOUT 4
 
-/* drm_display_mode->private_flags */
-#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
-#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
-#define INTEL_MODE_DP_FORCE_6BPC (0x10)
-/* This flag must be set by the encoder's mode_fixup if it changes the crtc
- * timings in the mode to prevent the crtc fixup from overwriting them.
- * Currently only lvds needs that. */
-#define INTEL_MODE_CRTC_TIMINGS_SET (0x20)
-/*
- * Set when limited 16-235 (as opposed to full 0-255) RGB color range is
- * to be used.
- */
-#define INTEL_MODE_LIMITED_COLOR_RANGE (0x40)
-
-static inline void
-intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
-				int multiplier)
-{
-	mode->clock *= multiplier;
-	mode->private_flags |= multiplier;
-}
-
-static inline int
-intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
-{
-	return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
-}
-
 struct intel_framebuffer {
 	struct drm_framebuffer base;
 	struct drm_i915_gem_object *obj;
@@ -158,9 +128,12 @@ struct intel_encoder {
 	bool cloneable;
 	bool connectors_active;
 	void (*hot_plug)(struct intel_encoder *);
+	bool (*compute_config)(struct intel_encoder *,
+			       struct intel_crtc_config *);
 	void (*pre_pll_enable)(struct intel_encoder *);
 	void (*pre_enable)(struct intel_encoder *);
 	void (*enable)(struct intel_encoder *);
+	void (*mode_set)(struct intel_encoder *intel_encoder);
 	void (*disable)(struct intel_encoder *);
 	void (*post_disable)(struct intel_encoder *);
 	/* Read out the current hw state of this connector, returning true if
@@ -168,6 +141,7 @@ struct intel_encoder {
 	 * it is connected to in the pipe parameter. */
 	bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
 	int crtc_mask;
+	enum hpd_pin hpd_pin;
 };
 
 struct intel_panel {
@@ -199,6 +173,51 @@ struct intel_connector {
 	struct edid *edid;
 };
 
+struct intel_crtc_config {
+	struct drm_display_mode requested_mode;
+	struct drm_display_mode adjusted_mode;
+	/* This flag must be set by the encoder's compute_config callback if it
+	 * changes the crtc timings in the mode to prevent the crtc fixup from
+	 * overwriting them.  Currently only lvds needs that. */
+	bool timings_set;
+	/* Whether to set up the PCH/FDI. Note that we never allow sharing
+	 * between pch encoders and cpu encoders. */
+	bool has_pch_encoder;
+
+	/*
+	 * Use reduced/limited/broadcast rbg range, compressing from the full
+	 * range fed into the crtcs.
+	 */
+	bool limited_color_range;
+
+	/* DP has a bunch of special case unfortunately, so mark the pipe
+	 * accordingly. */
+	bool has_dp_encoder;
+	bool dither;
+
+	/* Controls for the clock computation, to override various stages. */
+	bool clock_set;
+
+	/* Settings for the intel dpll used on pretty much everything but
+	 * haswell. */
+	struct dpll {
+		unsigned n;
+		unsigned m1, m2;
+		unsigned p1, p2;
+	} dpll;
+
+	int pipe_bpp;
+	struct intel_link_m_n dp_m_n;
+	/**
+	 * This is currently used by DP and HDMI encoders since those can have a
+	 * target pixel clock != the port link clock (which is currently stored
+	 * in adjusted_mode->clock).
+	 */
+	int pixel_target_clock;
+	/* Used by SDVO (and if we ever fix it, HDMI). */
+	unsigned pixel_multiplier;
+};
+
 struct intel_crtc {
 	struct drm_crtc base;
 	enum pipe pipe;
@@ -230,7 +249,8 @@ struct intel_crtc {
 	int16_t cursor_x, cursor_y;
 	int16_t cursor_width, cursor_height;
 	bool cursor_visible;
-	unsigned int bpp;
+
+	struct intel_crtc_config config;
 
 	/* We can share PLLs across outputs if the timings match */
 	struct intel_pch_pll *pch_pll;
@@ -242,11 +262,16 @@ struct intel_crtc {
 
 struct intel_plane {
 	struct drm_plane base;
+	int plane;
 	enum pipe pipe;
 	struct drm_i915_gem_object *obj;
 	bool can_scale;
 	int max_downscale;
 	u32 lut_r[1024], lut_g[1024], lut_b[1024];
+	int crtc_x, crtc_y;
+	unsigned int crtc_w, crtc_h;
+	uint32_t src_x, src_y;
+	uint32_t src_w, src_h;
 	void (*update_plane)(struct drm_plane *plane,
 			     struct drm_framebuffer *fb,
 			     struct drm_i915_gem_object *obj,
@@ -448,9 +473,8 @@ extern void intel_hdmi_init(struct drm_device *dev,
 extern void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 				      struct intel_connector *intel_connector);
 extern struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
-extern bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
-				  const struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode);
+extern bool intel_hdmi_compute_config(struct intel_encoder *encoder,
+				      struct intel_crtc_config *pipe_config);
 extern void intel_dip_infoframe_csum(struct dip_infoframe *avi_if);
 extern bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg,
 			    bool is_sdvob);
@@ -465,18 +489,14 @@ extern void intel_dp_init(struct drm_device *dev, int output_reg,
 			  enum port port);
 extern void intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 				    struct intel_connector *intel_connector);
-void
-intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
-		 struct drm_display_mode *adjusted_mode);
 extern void intel_dp_init_link_config(struct intel_dp *intel_dp);
 extern void intel_dp_start_link_train(struct intel_dp *intel_dp);
 extern void intel_dp_complete_link_train(struct intel_dp *intel_dp);
 extern void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
 extern void intel_dp_encoder_destroy(struct drm_encoder *encoder);
 extern void intel_dp_check_link_status(struct intel_dp *intel_dp);
-extern bool intel_dp_mode_fixup(struct drm_encoder *encoder,
-				const struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode);
+extern bool intel_dp_compute_config(struct intel_encoder *encoder,
+				    struct intel_crtc_config *pipe_config);
 extern bool intel_dpd_is_edp(struct drm_device *dev);
 extern void ironlake_edp_backlight_on(struct intel_dp *intel_dp);
 extern void ironlake_edp_backlight_off(struct intel_dp *intel_dp);
@@ -484,11 +504,8 @@ extern void ironlake_edp_panel_on(struct intel_dp *intel_dp);
 extern void ironlake_edp_panel_off(struct intel_dp *intel_dp);
 extern void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp);
 extern void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
-extern void intel_edp_link_config(struct intel_encoder *, int *, int *);
-extern int intel_edp_target_clock(struct intel_encoder *,
-				  struct drm_display_mode *mode);
 extern bool intel_encoder_is_pch_edp(struct drm_encoder *encoder);
-extern int intel_plane_init(struct drm_device *dev, enum pipe pipe);
+extern int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
 extern void intel_flush_display_plane(struct drm_i915_private *dev_priv,
 				      enum plane plane);
 
@@ -532,6 +549,7 @@ extern bool intel_encoder_check_is_cloned(struct intel_encoder *encoder);
 extern void intel_connector_dpms(struct drm_connector *, int mode);
 extern bool intel_connector_get_hw_state(struct intel_connector *connector);
 extern void intel_modeset_check_state(struct drm_device *dev);
+extern void intel_plane_restore(struct drm_plane *plane);
 
 
 static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector)
@@ -637,6 +655,10 @@ extern void intel_init_clock_gating(struct drm_device *dev);
 extern void intel_write_eld(struct drm_encoder *encoder,
 			    struct drm_display_mode *mode);
 extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe);
+extern void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
+					 struct intel_link_m_n *m_n);
+extern void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
+					 struct intel_link_m_n *m_n);
 extern void intel_prepare_ddi(struct drm_device *dev);
 extern void hsw_fdi_link_train(struct drm_crtc *crtc);
 extern void intel_ddi_init(struct drm_device *dev, enum port port);
@@ -682,7 +704,7 @@ extern bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
 				   enum pipe *pipe);
 extern int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv);
 extern void intel_ddi_pll_init(struct drm_device *dev);
-extern void intel_ddi_enable_pipe_func(struct drm_crtc *crtc);
+extern void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc);
 extern void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
 					      enum transcoder cpu_transcoder);
 extern void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index f203418b6f0..8d81c929b7b 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -150,6 +150,9 @@ static int intelfb_create(struct drm_fb_helper *helper,
 	}
 	info->screen_size = size;
 
+	/* This driver doesn't need a VT switch to restore the mode on resume */
+	info->skip_vt_switch = true;
+
 	drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
 	drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
 
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 2474b1b6de6..ee4a8da8311 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -333,6 +333,7 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
 					 struct drm_display_mode *adjusted_mode)
 {
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
 	struct dip_infoframe avi_if = {
 		.type = DIP_TYPE_AVI,
 		.ver = DIP_VERSION_AVI,
@@ -343,7 +344,7 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
 		avi_if.body.avi.YQ_CN_PR |= DIP_AVI_PR_2;
 
 	if (intel_hdmi->rgb_quant_range_selectable) {
-		if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+		if (intel_crtc->config.limited_color_range)
 			avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_LIMITED;
 		else
 			avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_FULL;
@@ -601,14 +602,14 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder,
 	u32 hdmi_val;
 
 	hdmi_val = SDVO_ENCODING_HDMI;
-	if (!HAS_PCH_SPLIT(dev))
+	if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev))
 		hdmi_val |= intel_hdmi->color_range;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 		hdmi_val |= SDVO_VSYNC_ACTIVE_HIGH;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 		hdmi_val |= SDVO_HSYNC_ACTIVE_HIGH;
 
-	if (intel_crtc->bpp > 24)
+	if (intel_crtc->config.pipe_bpp > 24)
 		hdmi_val |= HDMI_COLOR_FORMAT_12bpc;
 	else
 		hdmi_val |= SDVO_COLOR_FORMAT_8bpc;
@@ -768,11 +769,12 @@ static int intel_hdmi_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
-			   const struct drm_display_mode *mode,
-			   struct drm_display_mode *adjusted_mode)
+bool intel_hdmi_compute_config(struct intel_encoder *encoder,
+			       struct intel_crtc_config *pipe_config)
 {
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 
 	if (intel_hdmi->color_range_auto) {
 		/* See CEA-861-E - 5.1 Default Encoding Parameters */
@@ -784,7 +786,23 @@ bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
 	}
 
 	if (intel_hdmi->color_range)
-		adjusted_mode->private_flags |= INTEL_MODE_LIMITED_COLOR_RANGE;
+		pipe_config->limited_color_range = true;
+
+	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev))
+		pipe_config->has_pch_encoder = true;
+
+	/*
+	 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
+	 * through, clamp it down. Note that g4x/vlv don't support 12bpc hdmi
+	 * outputs.
+	 */
+	if (pipe_config->pipe_bpp > 8*3 && HAS_PCH_SPLIT(dev)) {
+		DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
+		pipe_config->pipe_bpp = 12*3;
+	} else {
+		DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
+		pipe_config->pipe_bpp = 8*3;
+	}
 
 	return true;
 }
@@ -937,7 +955,6 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
 }
 
 static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = {
-	.mode_fixup = intel_hdmi_mode_fixup,
 	.mode_set = intel_hdmi_mode_set,
 };
 
@@ -988,17 +1005,18 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 	switch (port) {
 	case PORT_B:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
-		dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_B;
 		break;
 	case PORT_C:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
-		dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_C;
 		break;
 	case PORT_D:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
-		dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_D;
 		break;
 	case PORT_A:
+		intel_encoder->hpd_pin = HPD_PORT_A;
 		/* Internal port only for eDP. */
 	default:
 		BUG();
@@ -1065,6 +1083,7 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
 			 DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs);
 
+	intel_encoder->compute_config = intel_hdmi_compute_config;
 	intel_encoder->enable = intel_enable_hdmi;
 	intel_encoder->disable = intel_disable_hdmi;
 	intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6ff145f97e9..ca2d903c19b 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -261,8 +261,6 @@ centre_horizontally(struct drm_display_mode *mode,
 
 	mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
 	mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
-
-	mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
 }
 
 static void
@@ -284,8 +282,6 @@ centre_vertically(struct drm_display_mode *mode,
 
 	mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
 	mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
-
-	mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
 }
 
 static inline u32 panel_fitter_scaling(u32 source, u32 target)
@@ -301,17 +297,20 @@ static inline u32 panel_fitter_scaling(u32 source, u32 target)
 	return (FACTOR * ratio + FACTOR/2) / FACTOR;
 }
 
-static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
-				  const struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode)
+static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
+				      struct intel_crtc_config *pipe_config)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = intel_encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(encoder);
+	struct intel_lvds_encoder *lvds_encoder =
+		to_lvds_encoder(&intel_encoder->base);
 	struct intel_connector *intel_connector =
 		&lvds_encoder->attached_connector->base;
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+	struct drm_display_mode *mode = &pipe_config->requested_mode;
 	struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
 	u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
+	unsigned int lvds_bpp;
 	int pipe;
 
 	/* Should never happen!! */
@@ -323,6 +322,17 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 	if (intel_encoder_check_is_cloned(&lvds_encoder->base))
 		return false;
 
+	if ((I915_READ(lvds_encoder->reg) & LVDS_A3_POWER_MASK) ==
+	    LVDS_A3_POWER_UP)
+		lvds_bpp = 8*3;
+	else
+		lvds_bpp = 6*3;
+
+	if (lvds_bpp != pipe_config->pipe_bpp) {
+		DRM_DEBUG_KMS("forcing display bpp (was %d) to LVDS (%d)\n",
+			      pipe_config->pipe_bpp, lvds_bpp);
+		pipe_config->pipe_bpp = lvds_bpp;
+	}
 	/*
 	 * We have timings from the BIOS for the panel, put them in
 	 * to the adjusted mode.  The CRTC will be set up for this mode,
@@ -333,6 +343,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 			       adjusted_mode);
 
 	if (HAS_PCH_SPLIT(dev)) {
+		pipe_config->has_pch_encoder = true;
+
 		intel_pch_panel_fitting(dev,
 					intel_connector->panel.fitting_mode,
 					mode, adjusted_mode);
@@ -359,6 +371,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 		I915_WRITE(BCLRPAT(pipe), 0);
 
 	drm_mode_set_crtcinfo(adjusted_mode, 0);
+	pipe_config->timings_set = true;
 
 	switch (intel_connector->panel.fitting_mode) {
 	case DRM_MODE_SCALE_CENTER:
@@ -661,7 +674,6 @@ static int intel_lvds_set_property(struct drm_connector *connector,
 }
 
 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
-	.mode_fixup = intel_lvds_mode_fixup,
 	.mode_set = intel_lvds_mode_set,
 };
 
@@ -850,6 +862,14 @@ static const struct dmi_system_id intel_no_lvds[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"),
 		},
 	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Fujitsu Esprimo Q900",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Q900"),
+		},
+	},
 
 	{ }	/* terminating entry */
 };
@@ -1105,6 +1125,7 @@ bool intel_lvds_init(struct drm_device *dev)
 	intel_encoder->enable = intel_enable_lvds;
 	intel_encoder->pre_enable = intel_pre_enable_lvds;
 	intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
+	intel_encoder->compute_config = intel_lvds_compute_config;
 	intel_encoder->disable = intel_disable_lvds;
 	intel_encoder->get_hw_state = intel_lvds_get_hw_state;
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 888fe29537b..7874cecc286 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -286,8 +286,11 @@ void intel_panel_set_backlight(struct drm_device *dev, u32 level)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	dev_priv->backlight_level = level;
-	if (dev_priv->backlight_enabled)
+	dev_priv->backlight.level = level;
+	if (dev_priv->backlight.device)
+		dev_priv->backlight.device->props.brightness = level;
+
+	if (dev_priv->backlight.enabled)
 		intel_panel_actually_set_backlight(dev, level);
 }
 
@@ -295,7 +298,7 @@ void intel_panel_disable_backlight(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	dev_priv->backlight_enabled = false;
+	dev_priv->backlight.enabled = false;
 	intel_panel_actually_set_backlight(dev, 0);
 
 	if (INTEL_INFO(dev)->gen >= 4) {
@@ -318,8 +321,12 @@ void intel_panel_enable_backlight(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (dev_priv->backlight_level == 0)
-		dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
+	if (dev_priv->backlight.level == 0) {
+		dev_priv->backlight.level = intel_panel_get_max_backlight(dev);
+		if (dev_priv->backlight.device)
+			dev_priv->backlight.device->props.brightness =
+				dev_priv->backlight.level;
+	}
 
 	if (INTEL_INFO(dev)->gen >= 4) {
 		uint32_t reg, tmp;
@@ -360,16 +367,16 @@ set_level:
 	 * BLC_PWM_CPU_CTL may be cleared to zero automatically when these
 	 * registers are set.
 	 */
-	dev_priv->backlight_enabled = true;
-	intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
+	dev_priv->backlight.enabled = true;
+	intel_panel_actually_set_backlight(dev, dev_priv->backlight.level);
 }
 
 static void intel_panel_init_backlight(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	dev_priv->backlight_level = intel_panel_get_backlight(dev);
-	dev_priv->backlight_enabled = dev_priv->backlight_level != 0;
+	dev_priv->backlight.level = intel_panel_get_backlight(dev);
+	dev_priv->backlight.enabled = dev_priv->backlight.level != 0;
 }
 
 enum drm_connector_status
@@ -405,8 +412,7 @@ static int intel_panel_update_status(struct backlight_device *bd)
 static int intel_panel_get_brightness(struct backlight_device *bd)
 {
 	struct drm_device *dev = bl_get_data(bd);
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	return dev_priv->backlight_level;
+	return intel_panel_get_backlight(dev);
 }
 
 static const struct backlight_ops intel_panel_bl_ops = {
@@ -424,31 +430,31 @@ int intel_panel_setup_backlight(struct drm_connector *connector)
 
 	memset(&props, 0, sizeof(props));
 	props.type = BACKLIGHT_RAW;
+	props.brightness = dev_priv->backlight.level;
 	props.max_brightness = _intel_panel_get_max_backlight(dev);
 	if (props.max_brightness == 0) {
 		DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n");
 		return -ENODEV;
 	}
-	dev_priv->backlight =
+	dev_priv->backlight.device =
 		backlight_device_register("intel_backlight",
 					  &connector->kdev, dev,
 					  &intel_panel_bl_ops, &props);
 
-	if (IS_ERR(dev_priv->backlight)) {
+	if (IS_ERR(dev_priv->backlight.device)) {
 		DRM_ERROR("Failed to register backlight: %ld\n",
-			  PTR_ERR(dev_priv->backlight));
-		dev_priv->backlight = NULL;
+			  PTR_ERR(dev_priv->backlight.device));
+		dev_priv->backlight.device = NULL;
 		return -ENODEV;
 	}
-	dev_priv->backlight->props.brightness = intel_panel_get_backlight(dev);
 	return 0;
 }
 
 void intel_panel_destroy_backlight(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	if (dev_priv->backlight)
-		backlight_device_unregister(dev_priv->backlight);
+	if (dev_priv->backlight.device)
+		backlight_device_unregister(dev_priv->backlight.device);
 }
 #else
 int intel_panel_setup_backlight(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 2de6da683de..13a0666a53b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2460,10 +2460,14 @@ void gen6_set_rps(struct drm_device *dev, u8 val)
 	if (val == dev_priv->rps.cur_delay)
 		return;
 
-	I915_WRITE(GEN6_RPNSWREQ,
-		   GEN6_FREQUENCY(val) |
-		   GEN6_OFFSET(0) |
-		   GEN6_AGGRESSIVE_TURBO);
+	if (IS_HASWELL(dev))
+		I915_WRITE(GEN6_RPNSWREQ,
+			   HSW_FREQUENCY(val));
+	else
+		I915_WRITE(GEN6_RPNSWREQ,
+			   GEN6_FREQUENCY(val) |
+			   GEN6_OFFSET(0) |
+			   GEN6_AGGRESSIVE_TURBO);
 
 	/* Make sure we continue to get interrupts
 	 * until we hit the minimum or maximum frequencies.
@@ -2601,12 +2605,19 @@ static void gen6_enable_rps(struct drm_device *dev)
 		   GEN6_RC_CTL_EI_MODE(1) |
 		   GEN6_RC_CTL_HW_ENABLE);
 
-	I915_WRITE(GEN6_RPNSWREQ,
-		   GEN6_FREQUENCY(10) |
-		   GEN6_OFFSET(0) |
-		   GEN6_AGGRESSIVE_TURBO);
-	I915_WRITE(GEN6_RC_VIDEO_FREQ,
-		   GEN6_FREQUENCY(12));
+	if (IS_HASWELL(dev)) {
+		I915_WRITE(GEN6_RPNSWREQ,
+			   HSW_FREQUENCY(10));
+		I915_WRITE(GEN6_RC_VIDEO_FREQ,
+			   HSW_FREQUENCY(12));
+	} else {
+		I915_WRITE(GEN6_RPNSWREQ,
+			   GEN6_FREQUENCY(10) |
+			   GEN6_OFFSET(0) |
+			   GEN6_AGGRESSIVE_TURBO);
+		I915_WRITE(GEN6_RC_VIDEO_FREQ,
+			   GEN6_FREQUENCY(12));
+	}
 
 	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
 	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
@@ -2628,7 +2639,7 @@ static void gen6_enable_rps(struct drm_device *dev)
 		   (IS_HASWELL(dev) ? GEN7_RP_DOWN_IDLE_AVG : GEN6_RP_DOWN_IDLE_CONT));
 
 	ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_MIN_FREQ_TABLE, 0);
-	if (!ret) {
+	if (!ret && (IS_GEN6(dev) || IS_IVYBRIDGE(dev))) {
 		pcu_mbox = 0;
 		ret = sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &pcu_mbox);
 		if (!ret && (pcu_mbox & (1<<31))) { /* OC supported */
@@ -3975,19 +3986,6 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
 		   _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
 
 	/*
-	 * On ValleyView, the GUnit needs to signal the GT
-	 * when flip and other events complete.  So enable
-	 * all the GUnit->GT interrupts here
-	 */
-	I915_WRITE(VLV_DPFLIPSTAT, PIPEB_LINE_COMPARE_INT_EN |
-		   PIPEB_HLINE_INT_EN | PIPEB_VBLANK_INT_EN |
-		   SPRITED_FLIPDONE_INT_EN | SPRITEC_FLIPDONE_INT_EN |
-		   PLANEB_FLIPDONE_INT_EN | PIPEA_LINE_COMPARE_INT_EN |
-		   PIPEA_HLINE_INT_EN | PIPEA_VBLANK_INT_EN |
-		   SPRITEB_FLIPDONE_INT_EN | SPRITEA_FLIPDONE_INT_EN |
-		   PLANEA_FLIPDONE_INT_EN);
-
-	/*
 	 * WaDisableVLVClockGating_VBIIssue
 	 * Disable clock gating on th GCFG unit to prevent a delay
 	 * in the reporting of vblank events.
@@ -4528,3 +4526,56 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val)
 
 	return 0;
 }
+
+static int vlv_punit_rw(struct drm_i915_private *dev_priv, u8 opcode,
+			u8 addr, u32 *val)
+{
+	u32 cmd, devfn, port, be, bar;
+
+	bar = 0;
+	be = 0xf;
+	port = IOSF_PORT_PUNIT;
+	devfn = PCI_DEVFN(2, 0);
+
+	cmd = (devfn << IOSF_DEVFN_SHIFT) | (opcode << IOSF_OPCODE_SHIFT) |
+		(port << IOSF_PORT_SHIFT) | (be << IOSF_BYTE_ENABLES_SHIFT) |
+		(bar << IOSF_BAR_SHIFT);
+
+	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+	if (I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) {
+		DRM_DEBUG_DRIVER("warning: pcode (%s) mailbox access failed\n",
+				 opcode == PUNIT_OPCODE_REG_READ ?
+				 "read" : "write");
+		return -EAGAIN;
+	}
+
+	I915_WRITE(VLV_IOSF_ADDR, addr);
+	if (opcode == PUNIT_OPCODE_REG_WRITE)
+		I915_WRITE(VLV_IOSF_DATA, *val);
+	I915_WRITE(VLV_IOSF_DOORBELL_REQ, cmd);
+
+	if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0,
+		     500)) {
+		DRM_ERROR("timeout waiting for pcode %s (%d) to finish\n",
+			  opcode == PUNIT_OPCODE_REG_READ ? "read" : "write",
+			  addr);
+		return -ETIMEDOUT;
+	}
+
+	if (opcode == PUNIT_OPCODE_REG_READ)
+		*val = I915_READ(VLV_IOSF_DATA);
+	I915_WRITE(VLV_IOSF_DATA, 0);
+
+	return 0;
+}
+
+int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
+{
+	return vlv_punit_rw(dev_priv, PUNIT_OPCODE_REG_READ, addr, val);
+}
+
+int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val)
+{
+	return vlv_punit_rw(dev_priv, PUNIT_OPCODE_REG_WRITE, addr, &val);
+}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 678c47cac72..298dc85ec32 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -788,7 +788,6 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
 	v_sync_offset = mode->vsync_start - mode->vdisplay;
 
 	mode_clock = mode->clock;
-	mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1;
 	mode_clock /= 10;
 	dtd->part1.clock = mode_clock;
 
@@ -957,9 +956,10 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo,
 		.len = DIP_LEN_AVI,
 	};
 	uint8_t sdvo_data[4 + sizeof(avi_if.body.avi)];
+	struct intel_crtc *intel_crtc = to_intel_crtc(intel_sdvo->base.base.crtc);
 
 	if (intel_sdvo->rgb_quant_range_selectable) {
-		if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+		if (intel_crtc->config.limited_color_range)
 			avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_LIMITED;
 		else
 			avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_FULL;
@@ -1041,12 +1041,18 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo,
 	return true;
 }
 
-static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
-				  const struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode)
+static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
+				      struct intel_crtc_config *pipe_config)
 {
-	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
-	int multiplier;
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+	struct drm_display_mode *mode = &pipe_config->requested_mode;
+
+	DRM_DEBUG_KMS("forcing bpc to 8 for SDVO\n");
+	pipe_config->pipe_bpp = 8*3;
+
+	if (HAS_PCH_SPLIT(encoder->base.dev))
+		pipe_config->has_pch_encoder = true;
 
 	/* We need to construct preferred input timings based on our
 	 * output timings.  To do that, we have to set the output
@@ -1073,8 +1079,9 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 	/* Make the CRTC code factor in the SDVO pixel multiplier.  The
 	 * SDVO device will factor out the multiplier during mode_set.
 	 */
-	multiplier = intel_sdvo_get_pixel_multiplier(adjusted_mode);
-	intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
+	pipe_config->pixel_multiplier =
+		intel_sdvo_get_pixel_multiplier(adjusted_mode);
+	adjusted_mode->clock *= pipe_config->pixel_multiplier;
 
 	if (intel_sdvo->color_range_auto) {
 		/* See CEA-861-E - 5.1 Default Encoding Parameters */
@@ -1088,24 +1095,24 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 	}
 
 	if (intel_sdvo->color_range)
-		adjusted_mode->private_flags |= INTEL_MODE_LIMITED_COLOR_RANGE;
+		pipe_config->limited_color_range = true;
 
 	return true;
 }
 
-static void intel_sdvo_mode_set(struct drm_encoder *encoder,
-				struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode)
+static void intel_sdvo_mode_set(struct intel_encoder *intel_encoder)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = intel_encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_crtc *crtc = intel_encoder->base.crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&intel_encoder->base);
 	u32 sdvox;
 	struct intel_sdvo_in_out_map in_out;
 	struct intel_sdvo_dtd input_dtd, output_dtd;
-	int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
 	int rate;
 
 	if (!mode)
@@ -1165,7 +1172,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 		DRM_INFO("Setting input timings on %s failed\n",
 			 SDVO_NAME(intel_sdvo));
 
-	switch (pixel_multiplier) {
+	switch (intel_crtc->config.pixel_multiplier) {
 	default:
 	case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
 	case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
@@ -1209,7 +1216,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 	} else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
 		/* done in crtc_mode_set as it lives inside the dpll register */
 	} else {
-		sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT;
+		sdvox |= (intel_crtc->config.pixel_multiplier - 1)
+			<< SDVO_PORT_MULTIPLY_SHIFT;
 	}
 
 	if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL &&
@@ -1223,8 +1231,12 @@ static bool intel_sdvo_connector_get_hw_state(struct intel_connector *connector)
 	struct intel_sdvo_connector *intel_sdvo_connector =
 		to_intel_sdvo_connector(&connector->base);
 	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(&connector->base);
+	struct drm_i915_private *dev_priv = intel_sdvo->base.base.dev->dev_private;
 	u16 active_outputs;
 
+	if (!(I915_READ(intel_sdvo->sdvo_reg) & SDVO_ENABLE))
+		return false;
+
 	intel_sdvo_get_active_outputs(intel_sdvo, &active_outputs);
 
 	if (active_outputs & intel_sdvo_connector->output_flag)
@@ -2040,11 +2052,6 @@ done:
 #undef CHECK_PROPERTY
 }
 
-static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
-	.mode_fixup = intel_sdvo_mode_fixup,
-	.mode_set = intel_sdvo_mode_set,
-};
-
 static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
 	.dpms = intel_sdvo_dpms,
 	.detect = intel_sdvo_detect,
@@ -2779,9 +2786,15 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 			SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
 	}
 
-	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
+	/* Only enable the hotplug irq if we need it, to work around noisy
+	 * hotplug lines.
+	 */
+	if (intel_sdvo->hotplug_active)
+		intel_encoder->hpd_pin = HPD_SDVO_B ? HPD_SDVO_B : HPD_SDVO_C;
 
+	intel_encoder->compute_config = intel_sdvo_compute_config;
 	intel_encoder->disable = intel_disable_sdvo;
+	intel_encoder->mode_set = intel_sdvo_mode_set;
 	intel_encoder->enable = intel_enable_sdvo;
 	intel_encoder->get_hw_state = intel_sdvo_get_hw_state;
 
@@ -2807,12 +2820,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 	 */
 	intel_sdvo->base.cloneable = false;
 
-	/* Only enable the hotplug irq if we need it, to work around noisy
-	 * hotplug lines.
-	 */
-	if (intel_sdvo->hotplug_active)
-		dev_priv->hotplug_supported_mask |= hotplug_mask;
-
 	intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
 
 	/* Set the input timing to the screen. Assume always input 0. */
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 1b6eb76beb7..c7d25c5dd4e 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -37,6 +37,174 @@
 #include "i915_drv.h"
 
 static void
+vlv_update_plane(struct drm_plane *dplane, struct drm_framebuffer *fb,
+		 struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
+		 unsigned int crtc_w, unsigned int crtc_h,
+		 uint32_t x, uint32_t y,
+		 uint32_t src_w, uint32_t src_h)
+{
+	struct drm_device *dev = dplane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(dplane);
+	int pipe = intel_plane->pipe;
+	int plane = intel_plane->plane;
+	u32 sprctl;
+	unsigned long sprsurf_offset, linear_offset;
+	int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
+
+	sprctl = I915_READ(SPCNTR(pipe, plane));
+
+	/* Mask out pixel format bits in case we change it */
+	sprctl &= ~SP_PIXFORMAT_MASK;
+	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
+	sprctl &= ~SP_TILED;
+
+	switch (fb->pixel_format) {
+	case DRM_FORMAT_YUYV:
+		sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YUYV;
+		break;
+	case DRM_FORMAT_YVYU:
+		sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YVYU;
+		break;
+	case DRM_FORMAT_UYVY:
+		sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_UYVY;
+		break;
+	case DRM_FORMAT_VYUY:
+		sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_VYUY;
+		break;
+	case DRM_FORMAT_RGB565:
+		sprctl |= SP_FORMAT_BGR565;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		sprctl |= SP_FORMAT_BGRX8888;
+		break;
+	case DRM_FORMAT_ARGB8888:
+		sprctl |= SP_FORMAT_BGRA8888;
+		break;
+	case DRM_FORMAT_XBGR2101010:
+		sprctl |= SP_FORMAT_RGBX1010102;
+		break;
+	case DRM_FORMAT_ABGR2101010:
+		sprctl |= SP_FORMAT_RGBA1010102;
+		break;
+	case DRM_FORMAT_XBGR8888:
+		sprctl |= SP_FORMAT_RGBX8888;
+		break;
+	case DRM_FORMAT_ABGR8888:
+		sprctl |= SP_FORMAT_RGBA8888;
+		break;
+	default:
+		/*
+		 * If we get here one of the upper layers failed to filter
+		 * out the unsupported plane formats
+		 */
+		BUG();
+		break;
+	}
+
+	if (obj->tiling_mode != I915_TILING_NONE)
+		sprctl |= SP_TILED;
+
+	sprctl |= SP_ENABLE;
+
+	/* Sizes are 0 based */
+	src_w--;
+	src_h--;
+	crtc_w--;
+	crtc_h--;
+
+	intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size);
+
+	I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
+	I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
+
+	linear_offset = y * fb->pitches[0] + x * pixel_size;
+	sprsurf_offset = intel_gen4_compute_page_offset(&x, &y,
+							obj->tiling_mode,
+							pixel_size,
+							fb->pitches[0]);
+	linear_offset -= sprsurf_offset;
+
+	if (obj->tiling_mode != I915_TILING_NONE)
+		I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x);
+	else
+		I915_WRITE(SPLINOFF(pipe, plane), linear_offset);
+
+	I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w);
+	I915_WRITE(SPCNTR(pipe, plane), sprctl);
+	I915_MODIFY_DISPBASE(SPSURF(pipe, plane), obj->gtt_offset +
+			     sprsurf_offset);
+	POSTING_READ(SPSURF(pipe, plane));
+}
+
+static void
+vlv_disable_plane(struct drm_plane *dplane)
+{
+	struct drm_device *dev = dplane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(dplane);
+	int pipe = intel_plane->pipe;
+	int plane = intel_plane->plane;
+
+	I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) &
+		   ~SP_ENABLE);
+	/* Activate double buffered register update */
+	I915_MODIFY_DISPBASE(SPSURF(pipe, plane), 0);
+	POSTING_READ(SPSURF(pipe, plane));
+}
+
+static int
+vlv_update_colorkey(struct drm_plane *dplane,
+		    struct drm_intel_sprite_colorkey *key)
+{
+	struct drm_device *dev = dplane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(dplane);
+	int pipe = intel_plane->pipe;
+	int plane = intel_plane->plane;
+	u32 sprctl;
+
+	if (key->flags & I915_SET_COLORKEY_DESTINATION)
+		return -EINVAL;
+
+	I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value);
+	I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value);
+	I915_WRITE(SPKEYMSK(pipe, plane), key->channel_mask);
+
+	sprctl = I915_READ(SPCNTR(pipe, plane));
+	sprctl &= ~SP_SOURCE_KEY;
+	if (key->flags & I915_SET_COLORKEY_SOURCE)
+		sprctl |= SP_SOURCE_KEY;
+	I915_WRITE(SPCNTR(pipe, plane), sprctl);
+
+	POSTING_READ(SPKEYMSK(pipe, plane));
+
+	return 0;
+}
+
+static void
+vlv_get_colorkey(struct drm_plane *dplane,
+		 struct drm_intel_sprite_colorkey *key)
+{
+	struct drm_device *dev = dplane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(dplane);
+	int pipe = intel_plane->pipe;
+	int plane = intel_plane->plane;
+	u32 sprctl;
+
+	key->min_value = I915_READ(SPKEYMINVAL(pipe, plane));
+	key->max_value = I915_READ(SPKEYMAXVAL(pipe, plane));
+	key->channel_mask = I915_READ(SPKEYMSK(pipe, plane));
+
+	sprctl = I915_READ(SPCNTR(pipe, plane));
+	if (sprctl & SP_SOURCE_KEY)
+		key->flags = I915_SET_COLORKEY_SOURCE;
+	else
+		key->flags = I915_SET_COLORKEY_NONE;
+}
+
+static void
 ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
 		 struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
 		 unsigned int crtc_w, unsigned int crtc_h,
@@ -441,6 +609,15 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 
 	old_obj = intel_plane->obj;
 
+	intel_plane->crtc_x = crtc_x;
+	intel_plane->crtc_y = crtc_y;
+	intel_plane->crtc_w = crtc_w;
+	intel_plane->crtc_h = crtc_h;
+	intel_plane->src_x = src_x;
+	intel_plane->src_y = src_y;
+	intel_plane->src_w = src_w;
+	intel_plane->src_h = src_h;
+
 	src_w = src_w >> 16;
 	src_h = src_h >> 16;
 
@@ -513,6 +690,11 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 
 	mutex_lock(&dev->struct_mutex);
 
+	/* Note that this will apply the VT-d workaround for scanouts,
+	 * which is more restrictive than required for sprites. (The
+	 * primary plane requires 256KiB alignment with 64 PTE padding,
+	 * the sprite planes only require 128KiB alignment and 32 PTE padding.
+	 */
 	ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
 	if (ret)
 		goto out_unlock;
@@ -568,6 +750,8 @@ intel_disable_plane(struct drm_plane *plane)
 	if (!intel_plane->obj)
 		goto out;
 
+	intel_wait_for_vblank(dev, intel_plane->pipe);
+
 	mutex_lock(&dev->struct_mutex);
 	intel_unpin_fb_obj(intel_plane->obj);
 	intel_plane->obj = NULL;
@@ -647,6 +831,20 @@ out_unlock:
 	return ret;
 }
 
+void intel_plane_restore(struct drm_plane *plane)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+
+	if (!plane->crtc || !plane->fb)
+		return;
+
+	intel_update_plane(plane, plane->crtc, plane->fb,
+			   intel_plane->crtc_x, intel_plane->crtc_y,
+			   intel_plane->crtc_w, intel_plane->crtc_h,
+			   intel_plane->src_x, intel_plane->src_y,
+			   intel_plane->src_w, intel_plane->src_h);
+}
+
 static const struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = intel_update_plane,
 	.disable_plane = intel_disable_plane,
@@ -670,8 +868,22 @@ static uint32_t snb_plane_formats[] = {
 	DRM_FORMAT_VYUY,
 };
 
+static uint32_t vlv_plane_formats[] = {
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_XBGR2101010,
+	DRM_FORMAT_ABGR2101010,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+};
+
 int
-intel_plane_init(struct drm_device *dev, enum pipe pipe)
+intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 {
 	struct intel_plane *intel_plane;
 	unsigned long possible_crtcs;
@@ -710,14 +922,26 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe)
 			intel_plane->can_scale = false;
 		else
 			intel_plane->can_scale = true;
-		intel_plane->max_downscale = 2;
-		intel_plane->update_plane = ivb_update_plane;
-		intel_plane->disable_plane = ivb_disable_plane;
-		intel_plane->update_colorkey = ivb_update_colorkey;
-		intel_plane->get_colorkey = ivb_get_colorkey;
-
-		plane_formats = snb_plane_formats;
-		num_plane_formats = ARRAY_SIZE(snb_plane_formats);
+
+		if (IS_VALLEYVIEW(dev)) {
+			intel_plane->max_downscale = 1;
+			intel_plane->update_plane = vlv_update_plane;
+			intel_plane->disable_plane = vlv_disable_plane;
+			intel_plane->update_colorkey = vlv_update_colorkey;
+			intel_plane->get_colorkey = vlv_get_colorkey;
+
+			plane_formats = vlv_plane_formats;
+			num_plane_formats = ARRAY_SIZE(vlv_plane_formats);
+		} else {
+			intel_plane->max_downscale = 2;
+			intel_plane->update_plane = ivb_update_plane;
+			intel_plane->disable_plane = ivb_disable_plane;
+			intel_plane->update_colorkey = ivb_update_colorkey;
+			intel_plane->get_colorkey = ivb_get_colorkey;
+
+			plane_formats = snb_plane_formats;
+			num_plane_formats = ARRAY_SIZE(snb_plane_formats);
+		}
 		break;
 
 	default:
@@ -726,6 +950,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe)
 	}
 
 	intel_plane->pipe = pipe;
+	intel_plane->plane = plane;
 	possible_crtcs = (1 << pipe);
 	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
 			     &intel_plane_funcs,
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index d808421c1c8..66737265200 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -905,11 +905,10 @@ intel_tv_mode_valid(struct drm_connector *connector,
 
 
 static bool
-intel_tv_mode_fixup(struct drm_encoder *encoder,
-		    const struct drm_display_mode *mode,
-		    struct drm_display_mode *adjusted_mode)
+intel_tv_compute_config(struct intel_encoder *encoder,
+			struct intel_crtc_config *pipe_config)
 {
-	struct intel_tv *intel_tv = enc_to_intel_tv(encoder);
+	struct intel_tv *intel_tv = enc_to_intel_tv(&encoder->base);
 	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
 
 	if (!tv_mode)
@@ -918,7 +917,10 @@ intel_tv_mode_fixup(struct drm_encoder *encoder,
 	if (intel_encoder_check_is_cloned(&intel_tv->base))
 		return false;
 
-	adjusted_mode->clock = tv_mode->clock;
+	pipe_config->adjusted_mode.clock = tv_mode->clock;
+	DRM_DEBUG_KMS("forcing bpc to 8 for TV\n");
+	pipe_config->pipe_bpp = 8*3;
+
 	return true;
 }
 
@@ -1485,7 +1487,6 @@ out:
 }
 
 static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = {
-	.mode_fixup = intel_tv_mode_fixup,
 	.mode_set = intel_tv_mode_set,
 };
 
@@ -1620,6 +1621,7 @@ intel_tv_init(struct drm_device *dev)
 	drm_encoder_init(dev, &intel_encoder->base, &intel_tv_enc_funcs,
 			 DRM_MODE_ENCODER_TVDAC);
 
+	intel_encoder->compute_config = intel_tv_compute_config;
 	intel_encoder->enable = intel_enable_tv;
 	intel_encoder->disable = intel_disable_tv;
 	intel_encoder->get_hw_state = intel_tv_get_hw_state;