aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-10-29 16:15:57 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-10-29 16:15:57 -0700
commit44234d0c465d996145e9c821fa28a981f2e8309d (patch)
tree0ffdc6949e885e2234933610296ad1f0e14b0515 /drivers
parent91ab9bf7c5322128d3b29c04393268658631e26a (diff)
parent9cc11dee3ddf140e39b0088688bfe5ee45d63b41 (diff)
Merge branch 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux
* 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux: i2c-intel-mid: Driver depends on PCI i2c-intel-mid: support for Moorestown and Medfield platform i2c-nomadik: fixup bus delays i2c-nomadik: support smbus emulation i2c-nomadik: dynamic clocking i2c-nomadik: documentation fixes i2c-s3c2410: Enable i2c clock only when doing some transfert
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-intel-mid.c1135
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c36
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c10
5 files changed, 1176 insertions, 16 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index fd455a2fdd1..c950be3cce2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -396,6 +396,16 @@ config I2C_IMX
This driver can also be built as a module. If so, the module
will be called i2c-imx.
+config I2C_INTEL_MID
+ tristate "Intel Moorestown/Medfield Platform I2C controller"
+ depends on PCI
+ help
+ Say Y here if you have an Intel Moorestown/Medfield platform I2C
+ controller.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-intel-mid.
+
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 033ad413f32..84cb16ae6f9 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
+obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
new file mode 100644
index 00000000000..80f70d3a744
--- /dev/null
+++ b/drivers/i2c/busses/i2c-intel-mid.c
@@ -0,0 +1,1135 @@
+/*
+ * Support for Moorestown/Medfield I2C chip
+ *
+ * Copyright (c) 2009 Intel Corporation.
+ * Copyright (c) 2009 Synopsys. Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License, version
+ * 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT ANY
+ * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/io.h>
+
+#define DRIVER_NAME "i2c-intel-mid"
+#define VERSION "Version 0.5ac2"
+#define PLATFORM "Moorestown/Medfield"
+
+/* Tables use: 0 Moorestown, 1 Medfield */
+#define NUM_PLATFORMS 2
+enum platform_enum {
+ MOORESTOWN = 0,
+ MEDFIELD = 1,
+};
+
+enum mid_i2c_status {
+ STATUS_IDLE = 0,
+ STATUS_READ_START,
+ STATUS_READ_IN_PROGRESS,
+ STATUS_READ_SUCCESS,
+ STATUS_WRITE_START,
+ STATUS_WRITE_SUCCESS,
+ STATUS_XFER_ABORT,
+ STATUS_STANDBY
+};
+
+/**
+ * struct intel_mid_i2c_private - per device I²C context
+ * @adap: core i2c layer adapter information
+ * @dev: device reference for power management
+ * @base: register base
+ * @speed: speed mode for this port
+ * @complete: completion object for transaction wait
+ * @abort: reason for last abort
+ * @rx_buf: pointer into working receive buffer
+ * @rx_buf_len: receive buffer length
+ * @status: adapter state machine
+ * @msg: the message we are currently processing
+ * @platform: the MID device type we are part of
+ * @lock: transaction serialization
+ *
+ * We allocate one of these per device we discover, it holds the core
+ * i2c layer objects and the data we need to track privately.
+ */
+struct intel_mid_i2c_private {
+ struct i2c_adapter adap;
+ struct device *dev;
+ void __iomem *base;
+ int speed;
+ struct completion complete;
+ int abort;
+ u8 *rx_buf;
+ int rx_buf_len;
+ enum mid_i2c_status status;
+ struct i2c_msg *msg;
+ enum platform_enum platform;
+ struct mutex lock;
+};
+
+#define NUM_SPEEDS 3
+
+#define ACTIVE 0
+#define STANDBY 1
+
+
+/* Control register */
+#define IC_CON 0x00
+#define SLV_DIS (1 << 6) /* Disable slave mode */
+#define RESTART (1 << 5) /* Send a Restart condition */
+#define ADDR_10BIT (1 << 4) /* 10-bit addressing */
+#define STANDARD_MODE (1 << 1) /* standard mode */
+#define FAST_MODE (2 << 1) /* fast mode */
+#define HIGH_MODE (3 << 1) /* high speed mode */
+#define MASTER_EN (1 << 0) /* Master mode */
+
+/* Target address register */
+#define IC_TAR 0x04
+#define IC_TAR_10BIT_ADDR (1 << 12) /* 10-bit addressing */
+#define IC_TAR_SPECIAL (1 << 11) /* Perform special I2C cmd */
+#define IC_TAR_GC_OR_START (1 << 10) /* 0: Gerneral Call Address */
+ /* 1: START BYTE */
+/* Slave Address Register */
+#define IC_SAR 0x08 /* Not used in Master mode */
+
+/* High Speed Master Mode Code Address Register */
+#define IC_HS_MADDR 0x0c
+
+/* Rx/Tx Data Buffer and Command Register */
+#define IC_DATA_CMD 0x10
+#define IC_RD (1 << 8) /* 1: Read 0: Write */
+
+/* Standard Speed Clock SCL High Count Register */
+#define IC_SS_SCL_HCNT 0x14
+
+/* Standard Speed Clock SCL Low Count Register */
+#define IC_SS_SCL_LCNT 0x18
+
+/* Fast Speed Clock SCL High Count Register */
+#define IC_FS_SCL_HCNT 0x1c
+
+/* Fast Spedd Clock SCL Low Count Register */
+#define IC_FS_SCL_LCNT 0x20
+
+/* High Speed Clock SCL High Count Register */
+#define IC_HS_SCL_HCNT 0x24
+
+/* High Speed Clock SCL Low Count Register */
+#define IC_HS_SCL_LCNT 0x28
+
+/* Interrupt Status Register */
+#define IC_INTR_STAT 0x2c /* Read only */
+#define R_GEN_CALL (1 << 11)
+#define R_START_DET (1 << 10)
+#define R_STOP_DET (1 << 9)
+#define R_ACTIVITY (1 << 8)
+#define R_RX_DONE (1 << 7)
+#define R_TX_ABRT (1 << 6)
+#define R_RD_REQ (1 << 5)
+#define R_TX_EMPTY (1 << 4)
+#define R_TX_OVER (1 << 3)
+#define R_RX_FULL (1 << 2)
+#define R_RX_OVER (1 << 1)
+#define R_RX_UNDER (1 << 0)
+
+/* Interrupt Mask Register */
+#define IC_INTR_MASK 0x30 /* Read and Write */
+#define M_GEN_CALL (1 << 11)
+#define M_START_DET (1 << 10)
+#define M_STOP_DET (1 << 9)
+#define M_ACTIVITY (1 << 8)
+#define M_RX_DONE (1 << 7)
+#define M_TX_ABRT (1 << 6)
+#define M_RD_REQ (1 << 5)
+#define M_TX_EMPTY (1 << 4)
+#define M_TX_OVER (1 << 3)
+#define M_RX_FULL (1 << 2)
+#define M_RX_OVER (1 << 1)
+#define M_RX_UNDER (1 << 0)
+
+/* Raw Interrupt Status Register */
+#define IC_RAW_INTR_STAT 0x34 /* Read Only */
+#define GEN_CALL (1 << 11) /* General call */
+#define START_DET (1 << 10) /* (RE)START occured */
+#define STOP_DET (1 << 9) /* STOP occured */
+#define ACTIVITY (1 << 8) /* Bus busy */
+#define RX_DONE (1 << 7) /* Not used in Master mode */
+#define TX_ABRT (1 << 6) /* Transmit Abort */
+#define RD_REQ (1 << 5) /* Not used in Master mode */
+#define TX_EMPTY (1 << 4) /* TX FIFO <= threshold */
+#define TX_OVER (1 << 3) /* TX FIFO overflow */
+#define RX_FULL (1 << 2) /* RX FIFO >= threshold */
+#define RX_OVER (1 << 1) /* RX FIFO overflow */
+#define RX_UNDER (1 << 0) /* RX FIFO empty */
+
+/* Receive FIFO Threshold Register */
+#define IC_RX_TL 0x38
+
+/* Transmit FIFO Treshold Register */
+#define IC_TX_TL 0x3c
+
+/* Clear Combined and Individual Interrupt Register */
+#define IC_CLR_INTR 0x40
+#define CLR_INTR (1 << 0)
+
+/* Clear RX_UNDER Interrupt Register */
+#define IC_CLR_RX_UNDER 0x44
+#define CLR_RX_UNDER (1 << 0)
+
+/* Clear RX_OVER Interrupt Register */
+#define IC_CLR_RX_OVER 0x48
+#define CLR_RX_OVER (1 << 0)
+
+/* Clear TX_OVER Interrupt Register */
+#define IC_CLR_TX_OVER 0x4c
+#define CLR_TX_OVER (1 << 0)
+
+#define IC_CLR_RD_REQ 0x50
+
+/* Clear TX_ABRT Interrupt Register */
+#define IC_CLR_TX_ABRT 0x54
+#define CLR_TX_ABRT (1 << 0)
+#define IC_CLR_RX_DONE 0x58
+
+/* Clear ACTIVITY Interrupt Register */
+#define IC_CLR_ACTIVITY 0x5c
+#define CLR_ACTIVITY (1 << 0)
+
+/* Clear STOP_DET Interrupt Register */
+#define IC_CLR_STOP_DET 0x60
+#define CLR_STOP_DET (1 << 0)
+
+/* Clear START_DET Interrupt Register */
+#define IC_CLR_START_DET 0x64
+#define CLR_START_DET (1 << 0)
+
+/* Clear GEN_CALL Interrupt Register */
+#define IC_CLR_GEN_CALL 0x68
+#define CLR_GEN_CALL (1 << 0)
+
+/* Enable Register */
+#define IC_ENABLE 0x6c
+#define ENABLE (1 << 0)
+
+/* Status Register */
+#define IC_STATUS 0x70 /* Read Only */
+#define STAT_SLV_ACTIVITY (1 << 6) /* Slave not in idle */
+#define STAT_MST_ACTIVITY (1 << 5) /* Master not in idle */
+#define STAT_RFF (1 << 4) /* RX FIFO Full */
+#define STAT_RFNE (1 << 3) /* RX FIFO Not Empty */
+#define STAT_TFE (1 << 2) /* TX FIFO Empty */
+#define STAT_TFNF (1 << 1) /* TX FIFO Not Full */
+#define STAT_ACTIVITY (1 << 0) /* Activity Status */
+
+/* Transmit FIFO Level Register */
+#define IC_TXFLR 0x74 /* Read Only */
+#define TXFLR (1 << 0) /* TX FIFO level */
+
+/* Receive FIFO Level Register */
+#define IC_RXFLR 0x78 /* Read Only */
+#define RXFLR (1 << 0) /* RX FIFO level */
+
+/* Transmit Abort Source Register */
+#define IC_TX_ABRT_SOURCE 0x80
+#define ABRT_SLVRD_INTX (1 << 15)
+#define ABRT_SLV_ARBLOST (1 << 14)
+#define ABRT_SLVFLUSH_TXFIFO (1 << 13)
+#define ARB_LOST (1 << 12)
+#define ABRT_MASTER_DIS (1 << 11)
+#define ABRT_10B_RD_NORSTRT (1 << 10)
+#define ABRT_SBYTE_NORSTRT (1 << 9)
+#define ABRT_HS_NORSTRT (1 << 8)
+#define ABRT_SBYTE_ACKDET (1 << 7)
+#define ABRT_HS_ACKDET (1 << 6)
+#define ABRT_GCALL_READ (1 << 5)
+#define ABRT_GCALL_NOACK (1 << 4)
+#define ABRT_TXDATA_NOACK (1 << 3)
+#define ABRT_10ADDR2_NOACK (1 << 2)
+#define ABRT_10ADDR1_NOACK (1 << 1)
+#define ABRT_7B_ADDR_NOACK (1 << 0)
+
+/* Enable Status Register */
+#define IC_ENABLE_STATUS 0x9c
+#define IC_EN (1 << 0) /* I2C in an enabled state */
+
+/* Component Parameter Register 1*/
+#define IC_COMP_PARAM_1 0xf4
+#define APB_DATA_WIDTH (0x3 << 0)
+
+/* added by xiaolin --begin */
+#define SS_MIN_SCL_HIGH 4000
+#define SS_MIN_SCL_LOW 4700
+#define FS_MIN_SCL_HIGH 600
+#define FS_MIN_SCL_LOW 1300
+#define HS_MIN_SCL_HIGH_100PF 60
+#define HS_MIN_SCL_LOW_100PF 120
+
+#define STANDARD 0
+#define FAST 1
+#define HIGH 2
+
+#define NUM_SPEEDS 3
+
+static int speed_mode[6] = {
+ FAST,
+ FAST,
+ FAST,
+ STANDARD,
+ FAST,
+ FAST
+};
+
+static int ctl_num = 6;
+module_param_array(speed_mode, int, &ctl_num, S_IRUGO);
+MODULE_PARM_DESC(speed_mode, "Set the speed of the i2c interface (0-2)");
+
+/**
+ * intel_mid_i2c_disable - Disable I2C controller
+ * @adap: struct pointer to i2c_adapter
+ *
+ * Return Value:
+ * 0 success
+ * -EBUSY if device is busy
+ * -ETIMEDOUT if i2c cannot be disabled within the given time
+ *
+ * I2C bus state should be checked prior to disabling the hardware. If bus is
+ * not in idle state, an errno is returned. Write "0" to IC_ENABLE to disable
+ * I2C controller.
+ */
+static int intel_mid_i2c_disable(struct i2c_adapter *adap)
+{
+ struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
+ int err = 0;
+ int count = 0;
+ int ret1, ret2;
+ static const u16 delay[NUM_SPEEDS] = {100, 25, 3};
+
+ /* Set IC_ENABLE to 0 */
+ writel(0, i2c->base + IC_ENABLE);
+
+ /* Check if device is busy */
+ dev_dbg(&adap->dev, "mrst i2c disable\n");
+ while ((ret1 = readl(i2c->base + IC_ENABLE_STATUS) & 0x1)
+ || (ret2 = readl(i2c->base + IC_STATUS) & 0x1)) {
+ udelay(delay[i2c->speed]);
+ writel(0, i2c->base + IC_ENABLE);
+ dev_dbg(&adap->dev, "i2c is busy, count is %d speed %d\n",
+ count, i2c->speed);
+ if (count++ > 10) {
+ err = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ /* Clear all interrupts */
+ readl(i2c->base + IC_CLR_INTR);
+ readl(i2c->base + IC_CLR_STOP_DET);
+ readl(i2c->base + IC_CLR_START_DET);
+ readl(i2c->base + IC_CLR_ACTIVITY);
+ readl(i2c->base + IC_CLR_TX_ABRT);
+ readl(i2c->base + IC_CLR_RX_OVER);
+ readl(i2c->base + IC_CLR_RX_UNDER);
+ readl(i2c->base + IC_CLR_TX_OVER);
+ readl(i2c->base + IC_CLR_RX_DONE);
+ readl(i2c->base + IC_CLR_GEN_CALL);
+
+ /* Disable all interupts */
+ writel(0x0000, i2c->base + IC_INTR_MASK);
+
+ return err;
+}
+
+/**
+ * intel_mid_i2c_hwinit - Initialize the I2C hardware registers
+ * @dev: pci device struct pointer
+ *
+ * This function will be called in intel_mid_i2c_probe() before device
+ * registration.
+ *
+ * Return Values:
+ * 0 success
+ * -EBUSY i2c cannot be disabled
+ * -ETIMEDOUT i2c cannot be disabled
+ * -EFAULT If APB data width is not 32-bit wide
+ *
+ * I2C should be disabled prior to other register operation. If failed, an
+ * errno is returned. Mask and Clear all interrpts, this should be done at
+ * first. Set common registers which will not be modified during normal
+ * transfers, including: controll register, FIFO threshold and clock freq.
+ * Check APB data width at last.
+ */
+static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c)
+{
+ int err;
+
+ static const u16 hcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
+ { 0x75, 0x15, 0x07 },
+ { 0x04c, 0x10, 0x06 }
+ };
+ static const u16 lcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
+ { 0x7C, 0x21, 0x0E },
+ { 0x053, 0x19, 0x0F }
+ };
+
+ /* Disable i2c first */
+ err = intel_mid_i2c_disable(&i2c->adap);
+ if (err)
+ return err;
+
+ /*
+ * Setup clock frequency and speed mode
+ * Enable restart condition,
+ * enable master FSM, disable slave FSM,
+ * use target address when initiating transfer
+ */
+
+ writel((i2c->speed + 1) << 1 | SLV_DIS | RESTART | MASTER_EN,
+ i2c->base + IC_CON);
+ writel(hcnt[i2c->platform][i2c->speed],
+ i2c->base + (IC_SS_SCL_HCNT + (i2c->speed << 3)));
+ writel(lcnt[i2c->platform][i2c->speed],
+ i2c->base + (IC_SS_SCL_LCNT + (i2c->speed << 3)));
+
+ /* Set tranmit & receive FIFO threshold to zero */
+ writel(0x0, i2c->base + IC_RX_TL);
+ writel(0x0, i2c->base + IC_TX_TL);
+
+ return 0;
+}
+
+/**
+ * intel_mid_i2c_func - Return the supported three I2C operations.
+ * @adapter: i2c_adapter struct pointer
+ */
+static u32 intel_mid_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+/**
+ * intel_mid_i2c_address_neq - To check if the addresses for different i2c messages
+ * are equal.
+ * @p1: first i2c_msg
+ * @p2: second i2c_msg
+ *
+ * Return Values:
+ * 0 if addresses are equal
+ * 1 if not equal
+ *
+ * Within a single transfer, the I2C client may need to send its address more
+ * than once. So a check if the addresses match is needed.
+ */
+static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
+ const struct i2c_msg *p2)
+{
+ if (p1->addr != p2->addr)
+ return 1;
+ if ((p1->flags ^ p2->flags) & I2C_M_TEN)
+ return 1;
+ return 0;
+}
+
+/**
+ * intel_mid_i2c_abort - To handle transfer abortions and print error messages.
+ * @adap: i2c_adapter struct pointer
+ *
+ * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
+ * distingushed. At present, no circumstances have been found out that
+ * multiple errors would be occured simutaneously, so we simply use the
+ * register value directly.
+ *
+ * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
+ * a few extra steps)
+ */
+static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)
+{
+ /* Read about source register */
+ int abort = i2c->abort;
+ struct i2c_adapter *adap = &i2c->adap;
+
+ /* Single transfer error check:
+ * According to databook, TX/RX FIFOs would be flushed when
+ * the abort interrupt occured.
+ */
+ if (abort & ABRT_MASTER_DIS)
+ dev_err(&adap->dev,
+ "initiate master operation with master mode disabled.\n");
+ if (abort & ABRT_10B_RD_NORSTRT)
+ dev_err(&adap->dev,
+ "RESTART disabled and master sent READ cmd in 10-bit addressing.\n");
+
+ if (abort & ABRT_SBYTE_NORSTRT) {
+ dev_err(&adap->dev,
+ "RESTART disabled and user is trying to send START byte.\n");
+ writel(~ABRT_SBYTE_NORSTRT, i2c->base + IC_TX_ABRT_SOURCE);
+ writel(RESTART, i2c->base + IC_CON);
+ writel(~IC_TAR_SPECIAL, i2c->base + IC_TAR);
+ }
+
+ if (abort & ABRT_SBYTE_ACKDET)
+ dev_err(&adap->dev,
+ "START byte was not acknowledged.\n");
+ if (abort & ABRT_TXDATA_NOACK)
+ dev_dbg(&adap->dev,
+ "No acknowledgement received from slave.\n");
+ if (abort & ABRT_10ADDR2_NOACK)
+ dev_dbg(&adap->dev,
+ "The 2nd address byte of the 10-bit address was not acknowledged.\n");
+ if (abort & ABRT_10ADDR1_NOACK)
+ dev_dbg(&adap->dev,
+ "The 1st address byte of 10-bit address was not acknowledged.\n");
+ if (abort & ABRT_7B_ADDR_NOACK)
+ dev_dbg(&adap->dev,
+ "I2C slave device not acknowledged.\n");
+
+ /* Clear TX_ABRT bit */
+ readl(i2c->base + IC_CLR_TX_ABRT);
+ i2c->status = STATUS_XFER_ABORT;
+}
+
+/**
+ * xfer_read - Internal function to implement master read transfer.
+ * @adap: i2c_adapter struct pointer
+ * @buf: buffer in i2c_msg
+ * @length: number of bytes to be read
+ *
+ * Return Values:
+ * 0 if the read transfer succeeds
+ * -ETIMEDOUT if cannot read the "raw" interrupt register
+ * -EINVAL if a transfer abort occurred
+ *
+ * For every byte, a "READ" command will be loaded into IC_DATA_CMD prior to
+ * data transfer. The actual "read" operation will be performed if an RX_FULL
+ * interrupt occurred.
+ *
+ * Note there may be two interrupt signals captured, one should read
+ * IC_RAW_INTR_STAT to separate between errors and actual data.
+ */
+static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
+ int i = length;
+ int err;
+
+ if (length >= 256) {
+ dev_err(&adap->dev,
+ "I2C FIFO cannot support larger than 256 bytes\n");
+ return -EMSGSIZE;
+ }
+
+ INIT_COMPLETION(i2c->complete);
+
+ readl(i2c->base + IC_CLR_INTR);
+ writel(0x0044, i2c->base + IC_INTR_MASK);
+
+ i2c->status = STATUS_READ_START;
+
+ while (i--)
+ writel(IC_RD, i2c->base + IC_DATA_CMD);
+
+ i2c->status = STATUS_READ_START;
+ err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
+ if (!err) {
+ dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
+ intel_mid_i2c_hwinit(i2c);
+ return -ETIMEDOUT;
+ }
+ if (i2c->status == STATUS_READ_SUCCESS)
+ return 0;
+ else
+ return -EIO;
+}
+
+/**
+ * xfer_write - Internal function to implement master write transfer.
+ * @adap: i2c_adapter struct pointer
+ * @buf: buffer in i2c_msg
+ * @length: number of bytes to be read
+ *
+ * Return Values:
+ * 0 if the read transfer succeeds
+ * -ETIMEDOUT if we cannot read the "raw" interrupt register
+ * -EINVAL if a transfer abort occured
+ *
+ * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
+ * data transfer. The actual "write" operation will be performed when the
+ * RX_FULL interrupt signal occurs.
+ *
+ * Note there may be two interrupt signals captured, one should read
+ * IC_RAW_INTR_STAT to separate between errors and actual data.
+ */
+static int xfer_write(struct i2c_adapter *adap,
+ unsigned char *buf, int length)
+{
+ struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
+ int i, err;
+
+ if (length >= 256) {
+ dev_err(&adap->dev,
+ "I2C FIFO cannot support larger than 256 bytes\n");
+ return -EMSGSIZE;
+ }
+
+ INIT_COMPLETION(i2c->complete);
+
+ readl(i2c->base + IC_CLR_INTR);
+ writel(0x0050, i2c->base + IC_INTR_MASK);
+
+ i2c->status = STATUS_WRITE_START;
+ for (i = 0; i < length; i++)
+ writel((u16)(*(buf + i)), i2c->base + IC_DATA_CMD);
+
+ i2c->status = STATUS_WRITE_START;
+ err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
+ if (!err) {
+ dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
+ intel_mid_i2c_hwinit(i2c);
+ return -ETIMEDOUT;
+ } else {
+ if (i2c->status == STATUS_WRITE_SUCCESS)
+ return 0;
+ else
+ return -EIO;
+ }
+}
+
+static int intel_mid_i2c_setup(struct i2c_adapter *adap, struct i2c_msg *pmsg)
+{
+ struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
+ int err;
+ u32 reg;
+ u32 bit_mask;
+ u32 mode;
+
+ /* Disable device first */
+ err = intel_mid_i2c_disable(adap);
+ if (err) {
+ dev_err(&adap->dev,
+ "Cannot disable i2c controller, timeout\n");
+ return err;
+ }
+
+ mode = (1 + i2c->speed) << 1;
+ /* set the speed mode */
+ reg = readl(i2c->base + IC_CON);
+ if ((reg & 0x06) != mode) {
+ dev_dbg(&adap->dev, "set mode %d\n", i2c->speed);
+ writel((reg & ~0x6) | mode, i2c->base + IC_CON);
+ }
+
+ reg = readl(i2c->base + IC_CON);
+ /* use 7-bit addressing */
+ if (pmsg->flags & I2C_M_TEN) {
+ if ((reg & ADDR_10BIT) != ADDR_10BIT) {
+ dev_dbg(&adap->dev, "set i2c 10 bit address mode\n");
+ writel(reg | ADDR_10BIT, i2c->base + IC_CON);
+ }
+ } else {
+ if ((reg & ADDR_10BIT) != 0x0) {
+ dev_dbg(&adap->dev, "set i2c 7 bit address mode\n");
+ writel(reg & ~ADDR_10BIT, i2c->base + IC_CON);
+ }
+ }
+ /* enable restart conditions */
+ reg = readl(i2c->base + IC_CON);
+ if ((reg & RESTART) != RESTART) {
+ dev_dbg(&adap->dev, "enable restart conditions\n");
+ writel(reg | RESTART, i2c->base + IC_CON);
+ }
+
+ /* enable master FSM */
+ reg = readl(i2c->base + IC_CON);
+ dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
+ writel(reg | MASTER_EN, i2c->base + IC_CON);
+ if ((reg & SLV_DIS) != SLV_DIS) {
+ dev_dbg(&adap->dev, "enable master FSM\n");
+ writel(reg | SLV_DIS, i2c->base + IC_CON);
+ dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
+ }
+
+ /* use target address when initiating transfer */
+ reg = readl(i2c->base + IC_TAR);
+ bit_mask = IC_TAR_SPECIAL | IC_TAR_GC_OR_START;
+
+ if ((reg & bit_mask) != 0x0) {
+ dev_dbg(&adap->dev,
+ "WR: use target address when intiating transfer, i2c_tx_target\n");
+ writel(reg & ~bit_mask, i2c->base + IC_TAR);
+ }
+
+ /* set target address to the I2C slave address */
+ dev_dbg(&adap->dev,
+ "set target address to the I2C slave address, addr is %x\n",
+ pmsg->addr);
+ writel(pmsg->addr | (pmsg->flags & I2C_M_TEN ? IC_TAR_10BIT_ADDR : 0),
+ i2c->base + IC_TAR);
+
+ /* Enable I2C controller */
+ writel(ENABLE, i2c->base + IC_ENABLE);
+
+ return 0;
+}
+
+/**
+ * intel_mid_i2c_xfer - Main master transfer routine.
+ * @adap: i2c_adapter struct pointer
+ * @pmsg: i2c_msg struct pointer
+ * @num: number of i2c_msg
+ *
+ * Return Values:
+ * + number of messages transfered
+ * -ETIMEDOUT If cannot disable I2C controller or read IC_STATUS
+ * -EINVAL If the address in i2c_msg is invalid
+ *
+ * This function will be registered in i2c-core and exposed to external
+ * I2C clients.
+ * 1. Disable I2C controller
+ * 2. Unmask three interrupts: RX_FULL, TX_EMPTY, TX_ABRT
+ * 3. Check if address in i2c_msg is valid
+ * 4. Enable I2C controller
+ * 5. Perform real transfer (call xfer_read or xfer_write)
+ * 6. Wait until the current transfer is finished (check bus state)
+ * 7. Mask and clear all interrupts
+ */
+static int intel_mid_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *pmsg,
+ int num)
+{
+ struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
+ int i, err = 0;
+
+ /* if number of messages equal 0*/
+ if (num == 0)
+ return 0;
+
+ pm_runtime_get(i2c->dev);
+
+ mutex_lock(&i2c->lock);
+ dev_dbg(&adap->dev, "intel_mid_i2c_xfer, process %d msg(s)\n", num);
+ dev_dbg(&adap->dev, "slave address is %x\n", pmsg->addr);
+
+
+ if (i2c->status != STATUS_IDLE) {
+ dev_err(&adap->dev, "Adapter %d in transfer/standby\n",
+ adap->nr);
+ mutex_unlock(&i2c->lock);
+ pm_runtime_put(i2c->dev);
+ return -1;
+ }
+
+
+ for (i = 1; i < num; i++) {
+ /* Message address equal? */
+ if (unlikely(intel_mid_i2c_address_neq(&pmsg[0], &pmsg[i]))) {
+ dev_err(&adap->dev, "Invalid address in msg[%d]\n", i);
+ mutex_unlock(&i2c->lock);
+ pm_runtime_put(i2c->dev);
+ return -EINVAL;
+ }
+ }
+
+ if (intel_mid_i2c_setup(adap, pmsg)) {
+ mutex_unlock(&i2c->lock);
+ pm_runtime_put(i2c->dev);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < num; i++) {
+ i2c->msg = pmsg;
+ i2c->status = STATUS_IDLE;
+ /* Read or Write */
+ if (pmsg->flags & I2C_M_RD) {
+ dev_dbg(&adap->dev, "I2C_M_RD\n");
+ err = xfer_read(adap, pmsg->buf, pmsg->len);
+ } else {
+ dev_dbg(&adap->dev, "I2C_M_WR\n");
+ err = xfer_write(adap, pmsg->buf, pmsg->len);
+ }
+ if (err < 0)
+ break;
+ dev_dbg(&adap->dev, "msg[%d] transfer complete\n", i);
+ pmsg++; /* next message */
+ }
+
+ /* Mask interrupts */
+ writel(0x0000, i2c->base + IC_INTR_MASK);
+ /* Clear all interrupts */
+ readl(i2c->base + IC_CLR_INTR);
+
+ i2c->status = STATUS_IDLE;
+ mutex_unlock(&i2c->lock);
+ pm_runtime_put(i2c->dev);
+
+ return err;
+}
+
+static int intel_mid_i2c_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
+ struct i2c_adapter *adap = to_i2c_adapter(dev);
+ int err;
+
+ if (i2c->status != STATUS_IDLE)
+ return -1;
+
+ intel_mid_i2c_disable(adap);
+
+ err = pci_save_state(pdev);
+ if (err) {
+ dev_err(dev, "pci_save_state failed\n");
+ return err;
+ }
+
+ err = pci_set_power_state(pdev, PCI_D3hot);
+ if (err) {
+ dev_err(dev, "pci_set_power_state failed\n");
+ return err;
+ }
+ i2c->status = STATUS_STANDBY;
+
+ return 0;
+}
+
+static int intel_mid_i2c_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
+ int err;
+
+ if (i2c->status != STATUS_STANDBY)
+ return 0;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(dev, "pci_enable_device failed\n");
+ return err;
+ }
+
+ i2c->status = STATUS_IDLE;
+
+ intel_mid_i2c_hwinit(i2c);
+ return err;
+}
+
+static void i2c_isr_read(struct intel_mid_i2c_private *i2c)
+{
+ struct i2c_msg *msg = i2c->msg;
+ int rx_num;
+ u32 len;
+ u8 *buf;
+
+ if (!(msg->flags & I2C_M_RD))
+ return;
+
+ if (i2c->status != STATUS_READ_IN_PROGRESS) {
+ len = msg->len;
+ buf = msg->buf;
+ } else {
+ len = i2c->rx_buf_len;
+ buf = i2c->rx_buf;
+ }
+
+ rx_num = readl(i2c->base + IC_RXFLR);
+
+ for (; len > 0 && rx_num > 0; len--, rx_num--)
+ *buf++ = readl(i2c->base + IC_DATA_CMD);
+
+ if (len > 0) {
+ i2c->status = STATUS_READ_IN_PROGRESS;
+ i2c->rx_buf_len = len;
+ i2c->rx_buf = buf;
+ } else
+ i2c->status = STATUS_READ_SUCCESS;
+
+ return;
+}
+
+static irqreturn_t intel_mid_i2c_isr(int this_irq, void *dev)
+{
+ struct intel_mid_i2c_private *i2c = dev;
+ u32 stat = readl(i2c->base + IC_INTR_STAT);
+
+ if (!stat)
+ return IRQ_NONE;
+
+ dev_dbg(&i2c->adap.dev, "%s, stat = 0x%x\n", __func__, stat);
+ stat &= 0x54;
+
+ if (i2c->status != STATUS_WRITE_START &&
+ i2c->status != STATUS_READ_START &&
+ i2c->status != STATUS_READ_IN_PROGRESS)
+ goto err;
+
+ if (stat & TX_ABRT)
+ i2c->abort = readl(i2c->base + IC_TX_ABRT_SOURCE);
+
+ readl(i2c->base + IC_CLR_INTR);
+
+ if (stat & TX_ABRT) {
+ intel_mid_i2c_abort(i2c);
+ goto exit;
+ }
+
+ if (stat & RX_FULL) {
+ i2c_isr_read(i2c);
+ goto exit;
+ }
+
+ if (stat & TX_EMPTY) {
+ if (readl(i2c->base + IC_STATUS) & 0x4)
+ i2c->status = STATUS_WRITE_SUCCESS;
+ }
+
+exit:
+ if (i2c->status == STATUS_READ_SUCCESS ||
+ i2c->status == STATUS_WRITE_SUCCESS ||
+ i2c->status == STATUS_XFER_ABORT) {
+ /* Clear all interrupts */
+ readl(i2c->base + IC_CLR_INTR);
+ /* Mask interrupts */
+ writel(0, i2c->base + IC_INTR_MASK);
+ complete(&i2c->complete);
+ }
+err:
+ return IRQ_HANDLED;
+}
+
+static struct i2c_algorithm intel_mid_i2c_algorithm = {
+ .master_xfer = intel_mid_i2c_xfer,
+ .functionality = intel_mid_i2c_func,
+};
+
+
+static const struct dev_pm_ops intel_mid_i2c_pm_ops = {
+ .runtime_suspend = intel_mid_i2c_runtime_suspend,
+ .runtime_resume = intel_mid_i2c_runtime_resume,
+};
+
+/**
+ * intel_mid_i2c_probe - I2C controller initialization routine
+ * @dev: pci device
+ * @id: device id
+ *
+ * Return Values:
+ * 0 success
+ * -ENODEV If cannot allocate pci resource
+ * -ENOMEM If the register base remapping failed, or
+ * if kzalloc failed
+ *
+ * Initialization steps:
+ * 1. Request for PCI resource
+ * 2. Remap the start address of PCI resource to register base
+ * 3. Request for device memory region
+ * 4. Fill in the struct members of intel_mid_i2c_private
+ * 5. Call intel_mid_i2c_hwinit() for hardware initialization
+ * 6. Register I2C adapter in i2c-core
+ */
+static int __devinit intel_mid_i2c_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct intel_mid_i2c_private *mrst;
+ unsigned long start, len;
+ int err, busnum;
+ void __iomem *base = NULL;
+
+ dev_dbg(&dev->dev, "Get into probe function for I2C\n");
+ err = pci_enable_device(dev);
+ if (err) {
+ dev_err(&dev->dev, "Failed to enable I2C PCI device (%d)\n",
+ err);
+ goto exit;
+ }
+
+ /* Determine the address of the I2C area */
+ start = pci_resource_start(dev, 0);
+ len = pci_resource_len(dev, 0);
+ if (!start || len == 0) {
+ dev_err(&dev->dev, "base address not set\n");
+ err = -ENODEV;
+ goto exit;
+ }
+ dev_dbg(&dev->dev, "%s i2c resource start 0x%lx, len=%ld\n",
+ PLATFORM, start, len);
+
+ err = pci_request_region(dev, 0, DRIVER_NAME);
+ if (err) {
+ dev_err(&dev->dev, "failed to request I2C region "
+ "0x%lx-0x%lx\n", start,
+ (unsigned long)pci_resource_end(dev, 0));
+ goto exit;
+ }
+
+ base = ioremap_nocache(start, len);
+ if (!base) {
+ dev_err(&dev->dev, "I/O memory remapping failed\n");
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ /* Allocate the per-device data structure, intel_mid_i2c_private */
+ mrst = kzalloc(sizeof(struct intel_mid_i2c_private), GFP_KERNEL);
+ if (mrst == NULL) {
+ dev_err(&dev->dev, "can't allocate interface\n");
+ err = -ENOMEM;
+ goto fail1;
+ }
+
+ /* Initialize struct members */
+ snprintf(mrst->adap.name, sizeof(mrst->adap.name),
+ "MRST/Medfield I2C at %lx", start);
+ mrst->adap.owner = THIS_MODULE;
+ mrst->adap.algo = &intel_mid_i2c_algorithm;
+ mrst->adap.dev.parent = &dev->dev;
+ mrst->dev = &dev->dev;
+ mrst->base = base;
+ mrst->speed = STANDARD;
+ mrst->abort = 0;
+ mrst->rx_buf_len = 0;
+ mrst->status = STATUS_IDLE;
+
+ pci_set_drvdata(dev, mrst);
+ i2c_set_adapdata(&mrst->adap, mrst);
+
+ mrst->adap.nr = busnum = id->driver_data;
+ if (dev->device <= 0x0804)
+ mrst->platform = MOORESTOWN;
+ else
+ mrst->platform = MEDFIELD;
+
+ dev_dbg(&dev->dev, "I2C%d\n", busnum);
+
+ if (ctl_num > busnum) {
+ if (speed_mode[busnum] < 0 || speed_mode[busnum] >= NUM_SPEEDS)
+ dev_warn(&dev->dev, "invalid speed %d ignored.\n",
+ speed_mode[busnum]);
+ else
+ mrst->speed = speed_mode[busnum];
+ }
+
+ /* Initialize i2c controller */
+ err = intel_mid_i2c_hwinit(mrst);
+ if (err < 0) {
+ dev_err(&dev->dev, "I2C interface initialization failed\n");
+ goto fail2;
+ }
+
+ mutex_init(&mrst->lock);
+ init_completion(&mrst->complete);
+
+ /* Clear all interrupts */
+ readl(mrst->base + IC_CLR_INTR);
+ writel(0x0000, mrst->base + IC_INTR_MASK);
+
+ err = request_irq(dev->irq, intel_mid_i2c_isr, IRQF_SHARED,
+ mrst->adap.name, mrst);
+ if (err) {
+ dev_err(&dev->dev, "Failed to request IRQ for I2C controller: "
+ "%s", mrst->adap.name);
+ goto fail2;
+ }
+
+ /* Adapter registration */
+ err = i2c_add_numbered_adapter(&mrst->adap);
+ if (err) {
+ dev_err(&dev->dev, "Adapter %s registration failed\n",
+ mrst->adap.name);
+ goto fail3;
+ }
+
+ dev_dbg(&dev->dev, "%s I2C bus %d driver bind success.\n",
+ (mrst->platform == MOORESTOWN) ? "Moorestown" : "Medfield",
+ busnum);
+
+ pm_runtime_enable(&dev->dev);
+ return 0;
+
+fail3:
+ free_irq(dev->irq, mrst);
+fail2:
+ pci_set_drvdata(dev, NULL);
+ kfree(mrst);
+fail1:
+ iounmap(base);
+fail0:
+ pci_release_region(dev, 0);
+exit:
+ return err;
+}
+
+static void __devexit intel_mid_i2c_remove(struct pci_dev *dev)
+{
+ struct intel_mid_i2c_private *mrst = pci_get_drvdata(dev);
+ intel_mid_i2c_disable(&mrst->adap);
+ if (i2c_del_adapter(&mrst->adap))
+ dev_err(&dev->dev, "Failed to delete i2c adapter");
+
+ free_irq(dev->irq, mrst);
+ pci_set_drvdata(dev, NULL);
+ iounmap(mrst->base);
+ kfree(mrst);
+ pci_release_region(dev, 0);
+}
+
+static struct pci_device_id intel_mid_i2c_ids[] = {
+ /* Moorestown */
+ { PCI_VDEVICE(INTEL, 0x0802), 0 },
+ { PCI_VDEVICE(INTEL, 0x0803), 1 },
+ { PCI_VDEVICE(INTEL, 0x0804), 2 },
+ /* Medfield */
+ { PCI_VDEVICE(INTEL, 0x0817), 3,},
+ { PCI_VDEVICE(INTEL, 0x0818), 4 },
+ { PCI_VDEVICE(INTEL, 0x0819), 5 },
+ { PCI_VDEVICE(INTEL, 0x082C), 0 },
+ { PCI_VDEVICE(INTEL, 0x082D), 1 },
+ { PCI_VDEVICE(INTEL, 0x082E), 2 },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, intel_mid_i2c_ids);
+
+static struct pci_driver intel_mid_i2c_driver = {
+ .name = DRIVER_NAME,
+ .id_table = intel_mid_i2c_ids,
+ .probe = intel_mid_i2c_probe,
+ .remove = __devexit_p(intel_mid_i2c_remove),
+};
+
+static int __init intel_mid_i2c_init(void)
+{
+ return pci_register_driver(&intel_mid_i2c_driver);
+}
+
+static void __exit intel_mid_i2c_exit(void)
+{
+ pci_unregister_driver(&intel_mid_i2c_driver);
+}
+
+module_init(intel_mid_i2c_init);
+module_exit(intel_mid_i2c_exit);
+
+MODULE_AUTHOR("Ba Zheng <zheng.ba@intel.com>");
+MODULE_DESCRIPTION("I2C driver for Moorestown Platform");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(VERSION);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 73de8ade10b..c9fffd0389f 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2009 ST-Ericsson
+ * Copyright (C) 2009 ST-Ericsson SA
* Copyright (C) 2009 STMicroelectronics
*
* I2C master mode controller driver, used in Nomadik 8815
@@ -103,6 +103,9 @@
/* maximum threshold value */
#define MAX_I2C_FIFO_THRESHOLD 15
+/* per-transfer delay, required for the hardware to stabilize */
+#define I2C_DELAY 150
+
enum i2c_status {
I2C_NOP,
I2C_ON_GOING,
@@ -118,7 +121,7 @@ enum i2c_operation {
};
/* controller response timeout in ms */
-#define I2C_TIMEOUT_MS 500
+#define I2C_TIMEOUT_MS 2000
/**
* struct i2c_nmk_client - client specific data
@@ -250,6 +253,8 @@ static int init_hw(struct nmk_i2c_dev *dev)
{
int stat;
+ clk_enable(dev->clk);
+
stat = flush_i2c_fifo(dev);
if (stat)
return stat;
@@ -263,6 +268,9 @@ static int init_hw(struct nmk_i2c_dev *dev)
dev->cli.operation = I2C_NO_OPERATION;
+ clk_disable(dev->clk);
+
+ udelay(I2C_DELAY);
return 0;
}
@@ -431,7 +439,6 @@ static int read_i2c(struct nmk_i2c_dev *dev)
(void) init_hw(dev);
status = -ETIMEDOUT;
}
-
return status;
}
@@ -502,9 +509,9 @@ static int write_i2c(struct nmk_i2c_dev *dev)
/**
* nmk_i2c_xfer() - I2C transfer function used by kernel framework
- * @i2c_adap - Adapter pointer to the controller
- * @msgs[] - Pointer to data to be written.
- * @num_msgs - Number of messages to be executed
+ * @i2c_adap: Adapter pointer to the controller
+ * @msgs: Pointer to data to be written.
+ * @num_msgs: Number of messages to be executed
*
* This is the function called by the generic kernel i2c_transfer()
* or i2c_smbus...() API calls. Note that this code is protected by the
@@ -559,6 +566,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
if (status)
return status;
+ clk_enable(dev->clk);
+
/* setup the i2c controller */
setup_i2c_controller(dev);
@@ -591,10 +600,13 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
dev_err(&dev->pdev->dev, "%s\n",
cause >= ARRAY_SIZE(abort_causes)
? "unknown reason" : abort_causes[cause]);
+ clk_disable(dev->clk);
return status;
}
- mdelay(1);
+ udelay(I2C_DELAY);
}
+ clk_disable(dev->clk);
+
/* return the no. messages processed */
if (status)
return status;
@@ -605,6 +617,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
/**
* disable_interrupts() - disable the interrupts
* @dev: private data of controller
+ * @irq: interrupt number
*/
static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
{
@@ -794,10 +807,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C
- | I2C_FUNC_SMBUS_BYTE_DATA
- | I2C_FUNC_SMBUS_WORD_DATA
- | I2C_FUNC_SMBUS_I2C_BLOCK;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm nmk_i2c_algo = {
@@ -857,8 +867,6 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
goto err_no_clk;
}
- clk_enable(dev->clk);
-
adap = &dev->adap;
adap->dev.parent = &pdev->dev;
adap->owner = THIS_MODULE;
@@ -895,7 +903,6 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
return 0;
err_init_hw:
- clk_disable(dev->clk);
err_add_adap:
clk_put(dev->clk);
err_no_clk:
@@ -928,7 +935,6 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
iounmap(dev->virtbase);
if (res)
release_mem_region(res->start, resource_size(res));
- clk_disable(dev->clk);
clk_put(dev->clk);
platform_set_drvdata(pdev, NULL);
kfree(dev);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 6a292ea5e35..6c00c107ebf 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -554,18 +554,23 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
int retry;
int ret;
+ clk_enable(i2c->clk);
+
for (retry = 0; retry < adap->retries; retry++) {
ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
- if (ret != -EAGAIN)
+ if (ret != -EAGAIN) {
+ clk_disable(i2c->clk);
return ret;
+ }
dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
udelay(100);
}
+ clk_disable(i2c->clk);
return -EREMOTEIO;
}
@@ -910,6 +915,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
+ clk_disable(i2c->clk);
return 0;
err_cpufreq:
@@ -977,7 +983,9 @@ static int s3c24xx_i2c_resume(struct device *dev)
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
i2c->suspended = 0;
+ clk_enable(i2c->clk);
s3c24xx_i2c_init(i2c);
+ clk_disable(i2c->clk);
return 0;
}