Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: usbtouchscreen - support bigger iNexio touchscreens
  Input: ads7846 - return error on regulator_get() failure
  Input: twl4030-vibra - correct the power down sequence
  Input: enable onkey driver of max8925
  Input: use ABS_CNT rather than (ABS_MAX + 1)

9 files changed, 176 insertions, 12 deletions

diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 56f314fbd4f..c9402676857 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -811,7 +811,7 @@ static const char *relatives[REL_MAX + 1] = {
 	[REL_WHEEL] = "Wheel",		[REL_MISC] = "Misc",
 };
 
-static const char *absolutes[ABS_MAX + 1] = {
+static const char *absolutes[ABS_CNT] = {
 	[ABS_X] = "X",			[ABS_Y] = "Y",
 	[ABS_Z] = "Z",			[ABS_RX] = "Rx",
 	[ABS_RY] = "Ry",		[ABS_RZ] = "Rz",
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 423e0e6031a..34157bb97ed 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -47,15 +47,15 @@ struct joydev {
 	struct mutex mutex;
 	struct device dev;
 
-	struct js_corr corr[ABS_MAX + 1];
+	struct js_corr corr[ABS_CNT];
 	struct JS_DATA_SAVE_TYPE glue;
 	int nabs;
 	int nkey;
 	__u16 keymap[KEY_MAX - BTN_MISC + 1];
 	__u16 keypam[KEY_MAX - BTN_MISC + 1];
-	__u8 absmap[ABS_MAX + 1];
-	__u8 abspam[ABS_MAX + 1];
-	__s16 abs[ABS_MAX + 1];
+	__u8 absmap[ABS_CNT];
+	__u8 abspam[ABS_CNT];
+	__s16 abs[ABS_CNT];
 };
 
 struct joydev_client {
@@ -826,7 +826,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 	joydev->handle.handler = handler;
 	joydev->handle.private = joydev;
 
-	for (i = 0; i < ABS_MAX + 1; i++)
+	for (i = 0; i < ABS_CNT; i++)
 		if (test_bit(i, dev->absbit)) {
 			joydev->absmap[i] = joydev->nabs;
 			joydev->abspam[joydev->nabs] = i;
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 48cdabec372..c44b9eafc55 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -80,6 +80,16 @@ config INPUT_M68K_BEEP
 	tristate "M68k Beeper support"
 	depends on M68K
 
+config INPUT_MAX8925_ONKEY
+	tristate "MAX8925 ONKEY support"
+	depends on MFD_MAX8925
+	help
+	  Support the ONKEY of MAX8925 PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called max8925_onkey.
+
 config INPUT_APANEL
 	tristate "Fujitsu Lifebook Application Panel buttons"
 	depends on X86 && I2C && LEDS_CLASS
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index f9f577031e0..71fe57d8023 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
+obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c
new file mode 100644
index 00000000000..80af4460801
--- /dev/null
+++ b/drivers/input/misc/max8925_onkey.c
@@ -0,0 +1,148 @@
+/**
+ * max8925_onkey.c - MAX8925 ONKEY driver
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *      Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max8925.h>
+#include <linux/slab.h>
+
+#define HARDRESET_EN		(1 << 7)
+#define PWREN_EN		(1 << 7)
+
+struct max8925_onkey_info {
+	struct input_dev	*idev;
+	struct i2c_client	*i2c;
+	int			irq;
+};
+
+/*
+ * MAX8925 gives us an interrupt when ONKEY is held for 3 seconds.
+ * max8925_set_bits() operates I2C bus and may sleep. So implement
+ * it in thread IRQ handler.
+ */
+static irqreturn_t max8925_onkey_handler(int irq, void *data)
+{
+	struct max8925_onkey_info *info = data;
+
+	input_report_key(info->idev, KEY_POWER, 1);
+	input_sync(info->idev);
+
+	/* Enable hardreset to halt if system isn't shutdown on time */
+	max8925_set_bits(info->i2c, MAX8925_SYSENSEL,
+			 HARDRESET_EN, HARDRESET_EN);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit max8925_onkey_probe(struct platform_device *pdev)
+{
+	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct max8925_onkey_info *info;
+	int error;
+
+	info = kzalloc(sizeof(struct max8925_onkey_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->i2c = chip->i2c;
+	info->irq = chip->irq_base + MAX8925_IRQ_GPM_SW_3SEC;
+
+	info->idev = input_allocate_device();
+	if (!info->idev) {
+		dev_err(chip->dev, "Failed to allocate input dev\n");
+		error = -ENOMEM;
+		goto out_input;
+	}
+
+	info->idev->name = "max8925_on";
+	info->idev->phys = "max8925_on/input0";
+	info->idev->id.bustype = BUS_I2C;
+	info->idev->dev.parent = &pdev->dev;
+	info->idev->evbit[0] = BIT_MASK(EV_KEY);
+	info->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+
+	error = request_threaded_irq(info->irq, NULL, max8925_onkey_handler,
+				     IRQF_ONESHOT, "onkey", info);
+	if (error < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq, error);
+		goto out_irq;
+	}
+
+	error = input_register_device(info->idev);
+	if (error) {
+		dev_err(chip->dev, "Can't register input device: %d\n", error);
+		goto out;
+	}
+
+	platform_set_drvdata(pdev, info);
+
+	return 0;
+
+out:
+	free_irq(info->irq, info);
+out_irq:
+	input_free_device(info->idev);
+out_input:
+	kfree(info);
+	return error;
+}
+
+static int __devexit max8925_onkey_remove(struct platform_device *pdev)
+{
+	struct max8925_onkey_info *info = platform_get_drvdata(pdev);
+
+	free_irq(info->irq, info);
+	input_unregister_device(info->idev);
+	kfree(info);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver max8925_onkey_driver = {
+	.driver		= {
+		.name	= "max8925-onkey",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= max8925_onkey_probe,
+	.remove		= __devexit_p(max8925_onkey_remove),
+};
+
+static int __init max8925_onkey_init(void)
+{
+	return platform_driver_register(&max8925_onkey_driver);
+}
+module_init(max8925_onkey_init);
+
+static void __exit max8925_onkey_exit(void)
+{
+	platform_driver_unregister(&max8925_onkey_driver);
+}
+module_exit(max8925_onkey_exit);
+
+MODULE_DESCRIPTION("Maxim MAX8925 ONKEY driver");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index fee9eac8e04..4f9b2afc24e 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -90,8 +90,8 @@ static void vibra_disable(struct vibra_info *info)
 	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
 			 (reg & ~TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL);
 
-	twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER);
 	twl4030_codec_disable_resource(TWL4030_CODEC_RES_APLL);
+	twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER);
 
 	info->enabled = false;
 }
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 1477466076a..b71eb55f2db 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -300,7 +300,7 @@ static int uinput_validate_absbits(struct input_dev *dev)
 	unsigned int cnt;
 	int retval = 0;
 
-	for (cnt = 0; cnt < ABS_MAX + 1; cnt++) {
+	for (cnt = 0; cnt < ABS_CNT; cnt++) {
 		if (!test_bit(cnt, dev->absbit))
 			continue;
 
@@ -387,7 +387,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 	dev->id.product	= user_dev->id.product;
 	dev->id.version	= user_dev->id.version;
 
-	size = sizeof(int) * (ABS_MAX + 1);
+	size = sizeof(int) * ABS_CNT;
 	memcpy(dev->absmax, user_dev->absmax, size);
 	memcpy(dev->absmin, user_dev->absmin, size);
 	memcpy(dev->absfuzz, user_dev->absfuzz, size);
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 532279cda0e..634f6f6b9b1 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1163,8 +1163,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	ts->reg = regulator_get(&spi->dev, "vcc");
 	if (IS_ERR(ts->reg)) {
-		dev_err(&spi->dev, "unable to get regulator: %ld\n",
-			PTR_ERR(ts->reg));
+		err = PTR_ERR(ts->reg);
+		dev_err(&spi->dev, "unable to get regulator: %ld\n", err);
 		goto err_free_gpio;
 	}
 
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 29a8bbf3f08..567d57215c2 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -857,6 +857,11 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
 	if ((pkt[0] & 0xe0) != 0xe0)
 		return 0;
 
+	if (be16_to_cpu(packet->data_len) > 0xff)
+		packet->data_len = cpu_to_be16(be16_to_cpu(packet->data_len) - 0x100);
+	if (be16_to_cpu(packet->x_len) > 0xff)
+		packet->x_len = cpu_to_be16(be16_to_cpu(packet->x_len) - 0x80);
+
 	/* send ACK */
 	ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
 
@@ -1112,7 +1117,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 
 #ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
 	[DEVTYPE_NEXIO] = {
-		.rept_size	= 128,
+		.rept_size	= 1024,
 		.irq_always	= true,
 		.read_data	= nexio_read_data,
 		.init		= nexio_init,