aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJames Bottomley <JBottomley@Parallels.com>2013-05-07 14:44:06 -0700
committerJames Bottomley <JBottomley@Parallels.com>2013-05-10 07:47:52 -0700
commitaa9f8328fc51460e15da129caf622b6560fa8c99 (patch)
tree3ca4c2a29e94538acff4aae04214d5645eaeac02 /drivers
parenta6cb3d012b983b350ae3892cff2e692665df0e1e (diff)
[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/aic94xx/aic94xx_dev.c24
-rw-r--r--drivers/scsi/aic94xx/aic94xx_hwi.c2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_tmf.c2
-rw-r--r--drivers/scsi/isci/remote_device.c4
-rw-r--r--drivers/scsi/isci/remote_device.h2
-rw-r--r--drivers/scsi/isci/request.c6
-rw-r--r--drivers/scsi/isci/task.c2
-rw-r--r--drivers/scsi/libsas/sas_ata.c18
-rw-r--r--drivers/scsi/libsas/sas_discover.c34
-rw-r--r--drivers/scsi/libsas/sas_expander.c110
-rw-r--r--drivers/scsi/libsas/sas_internal.h10
-rw-r--r--drivers/scsi/libsas/sas_port.c2
-rw-r--r--drivers/scsi/mvsas/mv_init.c2
-rw-r--r--drivers/scsi/mvsas/mv_sas.c16
-rw-r--r--drivers/scsi/mvsas/mv_sas.h4
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c18
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c2
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.c14
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.h4
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.c12
20 files changed, 144 insertions, 144 deletions
diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c
index 64136c56e70..33072388ea1 100644
--- a/drivers/scsi/aic94xx/aic94xx_dev.c
+++ b/drivers/scsi/aic94xx/aic94xx_dev.c
@@ -84,7 +84,7 @@ static void asd_set_ddb_type(struct domain_device *dev)
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
int ddb = (int) (unsigned long) dev->lldd_dev;
- if (dev->dev_type == SATA_PM_PORT)
+ if (dev->dev_type == SAS_SATA_PM_PORT)
asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_PM_PORT);
else if (dev->tproto)
asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_TARGET);
@@ -116,7 +116,7 @@ void asd_set_dmamode(struct domain_device *dev)
int ddb = (int) (unsigned long) dev->lldd_dev;
u32 qdepth = 0;
- if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) {
+ if (dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM_PORT) {
if (ata_id_has_ncq(ata_dev->id))
qdepth = ata_id_queue_depth(ata_dev->id);
asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK,
@@ -140,8 +140,8 @@ static int asd_init_sata(struct domain_device *dev)
int ddb = (int) (unsigned long) dev->lldd_dev;
asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
- if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
- dev->dev_type == SATA_PM_PORT) {
+ if (dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM ||
+ dev->dev_type == SAS_SATA_PM_PORT) {
struct dev_to_host_fis *fis = (struct dev_to_host_fis *)
dev->frame_rcvd;
asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status);
@@ -174,7 +174,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
asd_ddbsite_write_byte(asd_ha, ddb, CONN_MASK, dev->port->phy_mask);
if (dev->port->oob_mode != SATA_OOB_MODE) {
flags |= OPEN_REQUIRED;
- if ((dev->dev_type == SATA_DEV) ||
+ if ((dev->dev_type == SAS_SATA_DEV) ||
(dev->tproto & SAS_PROTOCOL_STP)) {
struct smp_resp *rps_resp = &dev->sata_dev.rps_resp;
if (rps_resp->frame_type == SMP_RESPONSE &&
@@ -188,8 +188,8 @@ static int asd_init_target_ddb(struct domain_device *dev)
} else {
flags |= CONCURRENT_CONN_SUPP;
if (!dev->parent &&
- (dev->dev_type == EDGE_DEV ||
- dev->dev_type == FANOUT_DEV))
+ (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE))
asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
4);
else
@@ -198,7 +198,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
asd_ddbsite_write_byte(asd_ha, ddb, NUM_CTX, 1);
}
}
- if (dev->dev_type == SATA_PM)
+ if (dev->dev_type == SAS_SATA_PM)
flags |= SATA_MULTIPORT;
asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags);
@@ -211,7 +211,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF);
asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
- if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+ if (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
i = asd_init_sata(dev);
if (i < 0) {
asd_free_ddb(asd_ha, ddb);
@@ -219,7 +219,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
}
}
- if (dev->dev_type == SAS_END_DEV) {
+ if (dev->dev_type == SAS_END_DEVICE) {
struct sas_end_device *rdev = rphy_to_end_device(dev->rphy);
if (rdev->I_T_nexus_loss_timeout > 0)
asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT,
@@ -328,10 +328,10 @@ int asd_dev_found(struct domain_device *dev)
spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
switch (dev->dev_type) {
- case SATA_PM:
+ case SAS_SATA_PM:
res = asd_init_sata_pm_ddb(dev);
break;
- case SATA_PM_PORT:
+ case SAS_SATA_PM_PORT:
res = asd_init_sata_pm_port_ddb(dev);
break;
default:
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
index 81b736c76ff..4df867e07b2 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -74,7 +74,7 @@ static void asd_init_phy_identify(struct asd_phy *phy)
memset(phy->identify_frame, 0, sizeof(*phy->identify_frame));
- phy->identify_frame->dev_type = SAS_END_DEV;
+ phy->identify_frame->dev_type = SAS_END_DEVICE;
if (phy->sas_phy.role & PHY_ROLE_INITIATOR)
phy->identify_frame->initiator_bits = phy->sas_phy.iproto;
if (phy->sas_phy.role & PHY_ROLE_TARGET)
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
index cf9040933da..d4c35df3d4a 100644
--- a/drivers/scsi/aic94xx/aic94xx_tmf.c
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -184,7 +184,7 @@ int asd_I_T_nexus_reset(struct domain_device *dev)
struct sas_phy *phy = sas_get_local_phy(dev);
/* Standard mandates link reset for ATA (type 0) and
* hard reset for SSP (type 1) */
- int reset_type = (dev->dev_type == SATA_DEV ||
+ int reset_type = (dev->dev_type == SAS_SATA_DEV ||
(dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
asd_clear_nexus_I_T(dev, NEXUS_PHASE_PRE);
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index c3aa6c5457b..96a26f45467 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1085,7 +1085,7 @@ static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *s
struct isci_host *ihost = idev->owning_port->owning_controller;
struct domain_device *dev = idev->domain_dev;
- if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) {
+ if (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) {
sci_change_state(&idev->sm, SCI_STP_DEV_IDLE);
} else if (dev_is_expander(dev)) {
sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE);
@@ -1098,7 +1098,7 @@ static void sci_remote_device_ready_state_exit(struct sci_base_state_machine *sm
struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
struct domain_device *dev = idev->domain_dev;
- if (dev->dev_type == SAS_END_DEV) {
+ if (dev->dev_type == SAS_END_DEVICE) {
struct isci_host *ihost = idev->owning_port->owning_controller;
isci_remote_device_not_ready(ihost, idev,
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 7674caae1d8..47a013fffae 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -297,7 +297,7 @@ static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_conte
static inline bool dev_is_expander(struct domain_device *dev)
{
- return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV;
+ return dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE;
}
static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev)
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 9594ab62702..e3e3bcbd5a9 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -2978,7 +2978,7 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
/* all unaccelerated request types (non ssp or ncq) handled with
* substates
*/
- if (!task && dev->dev_type == SAS_END_DEV) {
+ if (!task && dev->dev_type == SAS_END_DEVICE) {
state = SCI_REQ_TASK_WAIT_TC_COMP;
} else if (task && task->task_proto == SAS_PROTOCOL_SMP) {
state = SCI_REQ_SMP_WAIT_RESP;
@@ -3101,7 +3101,7 @@ sci_io_request_construct(struct isci_host *ihost,
if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
return SCI_FAILURE_INVALID_REMOTE_DEVICE;
- if (dev->dev_type == SAS_END_DEV)
+ if (dev->dev_type == SAS_END_DEVICE)
/* pass */;
else if (dev_is_sata(dev))
memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd));
@@ -3125,7 +3125,7 @@ enum sci_status sci_task_request_construct(struct isci_host *ihost,
/* Build the common part of the request */
sci_general_request_construct(ihost, idev, ireq);
- if (dev->dev_type == SAS_END_DEV || dev_is_sata(dev)) {
+ if (dev->dev_type == SAS_END_DEVICE || dev_is_sata(dev)) {
set_bit(IREQ_TMF, &ireq->flags);
memset(ireq->tc, 0, sizeof(struct scu_task_context));
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index b6f19a1db78..9bb020ac089 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -250,7 +250,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost,
}
/* XXX convert to get this from task->tproto like other drivers */
- if (dev->dev_type == SAS_END_DEV) {
+ if (dev->dev_type == SAS_END_DEVICE) {
isci_tmf->proto = SAS_PROTOCOL_SSP;
status = sci_task_request_construct_ssp(ireq);
if (status != SCI_SUCCESS)
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index bdb81cda840..161c98efade 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -285,14 +285,14 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
if (phy->attached_tproto & SAS_PROTOCOL_STP)
dev->tproto = phy->attached_tproto;
if (phy->attached_sata_dev)
- dev->tproto |= SATA_DEV;
+ dev->tproto |= SAS_SATA_DEV;
- if (phy->attached_dev_type == SATA_PENDING)
- dev->dev_type = SATA_PENDING;
+ if (phy->attached_dev_type == SAS_SATA_PENDING)
+ dev->dev_type = SAS_SATA_PENDING;
else {
int res;
- dev->dev_type = SATA_DEV;
+ dev->dev_type = SAS_SATA_DEV;
res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
&dev->sata_dev.rps_resp);
if (res) {
@@ -314,7 +314,7 @@ static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
int res;
/* we weren't pending, so successfully end the reset sequence now */
- if (dev->dev_type != SATA_PENDING)
+ if (dev->dev_type != SAS_SATA_PENDING)
return 1;
/* hmmm, if this succeeds do we need to repost the domain_device to the
@@ -348,9 +348,9 @@ static int smp_ata_check_ready(struct ata_link *link)
return 0;
switch (ex_phy->attached_dev_type) {
- case SATA_PENDING:
+ case SAS_SATA_PENDING:
return 0;
- case SAS_END_DEV:
+ case SAS_END_DEVICE:
if (ex_phy->attached_sata_dev)
return sas_ata_clear_pending(dev, ex_phy);
default:
@@ -631,7 +631,7 @@ static void sas_get_ata_command_set(struct domain_device *dev)
struct dev_to_host_fis *fis =
(struct dev_to_host_fis *) dev->frame_rcvd;
- if (dev->dev_type == SATA_PENDING)
+ if (dev->dev_type == SAS_SATA_PENDING)
return;
if ((fis->sector_count == 1 && /* ATA */
@@ -797,7 +797,7 @@ int sas_discover_sata(struct domain_device *dev)
{
int res;
- if (dev->dev_type == SATA_PM)
+ if (dev->dev_type == SAS_SATA_PM)
return -ENODEV;
sas_get_ata_command_set(dev);
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index a0c3003e0c7..62b58d38ce2 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -39,11 +39,11 @@
void sas_init_dev(struct domain_device *dev)
{
switch (dev->dev_type) {
- case SAS_END_DEV:
+ case SAS_END_DEVICE:
INIT_LIST_HEAD(&dev->ssp_dev.eh_list_node);
break;
- case EDGE_DEV:
- case FANOUT_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
INIT_LIST_HEAD(&dev->ex_dev.children);
mutex_init(&dev->ex_dev.cmd_mutex);
break;
@@ -93,9 +93,9 @@ static int sas_get_port_device(struct asd_sas_port *port)
if (fis->interrupt_reason == 1 && fis->lbal == 1 &&
fis->byte_count_low==0x69 && fis->byte_count_high == 0x96
&& (fis->device & ~0x10) == 0)
- dev->dev_type = SATA_PM;
+ dev->dev_type = SAS_SATA_PM;
else
- dev->dev_type = SATA_DEV;
+ dev->dev_type = SAS_SATA_DEV;
dev->tproto = SAS_PROTOCOL_SATA;
} else {
struct sas_identify_frame *id =
@@ -109,21 +109,21 @@ static int sas_get_port_device(struct asd_sas_port *port)
dev->port = port;
switch (dev->dev_type) {
- case SATA_DEV:
+ case SAS_SATA_DEV:
rc = sas_ata_init(dev);
if (rc) {
rphy = NULL;
break;
}
/* fall through */
- case SAS_END_DEV:
+ case SAS_END_DEVICE:
rphy = sas_end_device_alloc(port->port);
break;
- case EDGE_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
rphy = sas_expander_alloc(port->port,
SAS_EDGE_EXPANDER_DEVICE);
break;
- case FANOUT_DEV:
+ case SAS_FANOUT_EXPANDER_DEVICE:
rphy = sas_expander_alloc(port->port,
SAS_FANOUT_EXPANDER_DEVICE);
break;
@@ -156,7 +156,7 @@ static int sas_get_port_device(struct asd_sas_port *port)
dev->rphy = rphy;
get_device(&dev->rphy->dev);
- if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEV)
+ if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEVICE)
list_add_tail(&dev->disco_list_node, &port->disco_list);
else {
spin_lock_irq(&port->dev_list_lock);
@@ -315,7 +315,7 @@ void sas_free_device(struct kref *kref)
dev->phy = NULL;
/* remove the phys and ports, everything else should be gone */
- if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV)
+ if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
kfree(dev->ex_dev.ex_phy);
if (dev_is_sata(dev) && dev->sata_dev.ap) {
@@ -343,7 +343,7 @@ static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_d
spin_unlock_irq(&port->dev_list_lock);
spin_lock_irq(&ha->lock);
- if (dev->dev_type == SAS_END_DEV &&
+ if (dev->dev_type == SAS_END_DEVICE &&
!list_empty(&dev->ssp_dev.eh_list_node)) {
list_del_init(&dev->ssp_dev.eh_list_node);
ha->eh_active--;
@@ -457,15 +457,15 @@ static void sas_discover_domain(struct work_struct *work)
task_pid_nr(current));
switch (dev->dev_type) {
- case SAS_END_DEV:
+ case SAS_END_DEVICE:
error = sas_discover_end_dev(dev);
break;
- case EDGE_DEV:
- case FANOUT_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
error = sas_discover_root_expander(dev);
break;
- case SATA_DEV:
- case SATA_PM:
+ case SAS_SATA_DEV:
+ case SAS_SATA_PM:
#ifdef CONFIG_SCSI_SAS_ATA
error = sas_discover_sata(dev);
break;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 55cbd018015..74cc4a02092 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -183,21 +183,21 @@ static char sas_route_char(struct domain_device *dev, struct ex_phy *phy)
}
}
-static enum sas_dev_type to_dev_type(struct discover_resp *dr)
+static enum sas_device_type to_dev_type(struct discover_resp *dr)
{
/* This is detecting a failure to transmit initial dev to host
* FIS as described in section J.5 of sas-2 r16
*/
- if (dr->attached_dev_type == NO_DEVICE && dr->attached_sata_dev &&
+ if (dr->attached_dev_type == SAS_PHY_UNUSED && dr->attached_sata_dev &&
dr->linkrate >= SAS_LINK_RATE_1_5_GBPS)
- return SATA_PENDING;
+ return SAS_SATA_PENDING;
else
return dr->attached_dev_type;
}
static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
{
- enum sas_dev_type dev_type;
+ enum sas_device_type dev_type;
enum sas_linkrate linkrate;
u8 sas_addr[SAS_ADDR_SIZE];
struct smp_resp *resp = rsp;
@@ -238,7 +238,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
/* Handle vacant phy - rest of dr data is not valid so skip it */
if (phy->phy_state == PHY_VACANT) {
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
- phy->attached_dev_type = NO_DEVICE;
+ phy->attached_dev_type = SAS_PHY_UNUSED;
if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
phy->phy_id = phy_id;
goto skip;
@@ -259,7 +259,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
/* help some expanders that fail to zero sas_address in the 'no
* device' case
*/
- if (phy->attached_dev_type == NO_DEVICE ||
+ if (phy->attached_dev_type == SAS_PHY_UNUSED ||
phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
else
@@ -292,13 +292,13 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
out:
switch (phy->attached_dev_type) {
- case SATA_PENDING:
+ case SAS_SATA_PENDING:
type = "stp pending";
break;
- case NO_DEVICE:
+ case SAS_PHY_UNUSED:
type = "no device";
break;
- case SAS_END_DEV:
+ case SAS_END_DEVICE:
if (phy->attached_iproto) {
if (phy->attached_tproto)
type = "host+target";
@@ -311,8 +311,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
type = "ssp";
}
break;
- case EDGE_DEV:
- case FANOUT_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
type = "smp";
break;
default:
@@ -833,7 +833,7 @@ static struct domain_device *sas_ex_discover_end_dev(
} else
#endif
if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
- child->dev_type = SAS_END_DEV;
+ child->dev_type = SAS_END_DEVICE;
rphy = sas_end_device_alloc(phy->port);
/* FIXME: error handling */
if (unlikely(!rphy))
@@ -932,11 +932,11 @@ static struct domain_device *sas_ex_discover_expander(
switch (phy->attached_dev_type) {
- case EDGE_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
rphy = sas_expander_alloc(phy->port,
SAS_EDGE_EXPANDER_DEVICE);
break;
- case FANOUT_DEV:
+ case SAS_FANOUT_EXPANDER_DEVICE:
rphy = sas_expander_alloc(phy->port,
SAS_FANOUT_EXPANDER_DEVICE);
break;
@@ -1013,7 +1013,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
- if (ex_phy->attached_dev_type == NO_DEVICE) {
+ if (ex_phy->attached_dev_type == SAS_PHY_UNUSED) {
if (ex_phy->routing_attr == DIRECT_ROUTING) {
memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
sas_configure_routing(dev, ex_phy->attached_sas_addr);
@@ -1022,10 +1022,10 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
} else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
return 0;
- if (ex_phy->attached_dev_type != SAS_END_DEV &&
- ex_phy->attached_dev_type != FANOUT_DEV &&
- ex_phy->attached_dev_type != EDGE_DEV &&
- ex_phy->attached_dev_type != SATA_PENDING) {
+ if (ex_phy->attached_dev_type != SAS_END_DEVICE &&
+ ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE &&
+ ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ ex_phy->attached_dev_type != SAS_SATA_PENDING) {
SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
"phy 0x%x\n", ex_phy->attached_dev_type,
SAS_ADDR(dev->sas_addr),
@@ -1049,11 +1049,11 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
}
switch (ex_phy->attached_dev_type) {
- case SAS_END_DEV:
- case SATA_PENDING:
+ case SAS_END_DEVICE:
+ case SAS_SATA_PENDING:
child = sas_ex_discover_end_dev(dev, phy_id);
break;
- case FANOUT_DEV:
+ case SAS_FANOUT_EXPANDER_DEVICE:
if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
"attached to ex %016llx phy 0x%x\n",
@@ -1067,7 +1067,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
memcpy(dev->port->disc.fanout_sas_addr,
ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
/* fallthrough */
- case EDGE_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
child = sas_ex_discover_expander(dev, phy_id);
break;
default:
@@ -1111,8 +1111,8 @@ static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
phy->phy_state == PHY_NOT_PRESENT)
continue;
- if ((phy->attached_dev_type == EDGE_DEV ||
- phy->attached_dev_type == FANOUT_DEV) &&
+ if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) &&
phy->routing_attr == SUBTRACTIVE_ROUTING) {
memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
@@ -1130,8 +1130,8 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev)
u8 sub_addr[8] = {0, };
list_for_each_entry(child, &ex->children, siblings) {
- if (child->dev_type != EDGE_DEV &&
- child->dev_type != FANOUT_DEV)
+ if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ child->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
continue;
if (sub_addr[0] == 0) {
sas_find_sub_addr(child, sub_addr);
@@ -1208,7 +1208,7 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
int i;
u8 *sub_sas_addr = NULL;
- if (dev->dev_type != EDGE_DEV)
+ if (dev->dev_type != SAS_EDGE_EXPANDER_DEVICE)
return 0;
for (i = 0; i < ex->num_phys; i++) {
@@ -1218,8 +1218,8 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
phy->phy_state == PHY_NOT_PRESENT)
continue;
- if ((phy->attached_dev_type == FANOUT_DEV ||
- phy->attached_dev_type == EDGE_DEV) &&
+ if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+ phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) &&
phy->routing_attr == SUBTRACTIVE_ROUTING) {
if (!sub_sas_addr)
@@ -1245,8 +1245,8 @@ static void sas_print_parent_topology_bug(struct domain_device *child,
struct ex_phy *child_phy)
{
static const char *ex_type[] = {
- [EDGE_DEV] = "edge",
- [FANOUT_DEV] = "fanout",
+ [SAS_EDGE_EXPANDER_DEVICE] = "edge",
+ [SAS_FANOUT_EXPANDER_DEVICE] = "fanout",
};
struct domain_device *parent = child->parent;
@@ -1321,8 +1321,8 @@ static int sas_check_parent_topology(struct domain_device *child)
if (!child->parent)
return 0;
- if (child->parent->dev_type != EDGE_DEV &&
- child->parent->dev_type != FANOUT_DEV)
+ if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
return 0;
parent_ex = &child->parent->ex_dev;
@@ -1341,8 +1341,8 @@ static int sas_check_parent_topology(struct domain_device *child)
child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
switch (child->parent->dev_type) {
- case EDGE_DEV:
- if (child->dev_type == FANOUT_DEV) {
+ case SAS_EDGE_EXPANDER_DEVICE:
+ if (child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
child_phy->routing_attr != TABLE_ROUTING) {
sas_print_parent_topology_bug(child, parent_phy, child_phy);
@@ -1366,7 +1366,7 @@ static int sas_check_parent_topology(struct domain_device *child)
}
}
break;
- case FANOUT_DEV:
+ case SAS_FANOUT_EXPANDER_DEVICE:
if (parent_phy->routing_attr != TABLE_ROUTING ||
child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
sas_print_parent_topology_bug(child, parent_phy, child_phy);
@@ -1619,8 +1619,8 @@ static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
struct domain_device *dev;
list_for_each_entry(dev, &port->dev_list, dev_list_node) {
- if (dev->dev_type == EDGE_DEV ||
- dev->dev_type == FANOUT_DEV) {
+ if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
struct sas_expander_device *ex =
rphy_to_expander_device(dev->rphy);
@@ -1720,7 +1720,7 @@ static int sas_get_phy_change_count(struct domain_device *dev,
}
static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id,
- u8 *sas_addr, enum sas_dev_type *type)
+ u8 *sas_addr, enum sas_device_type *type)
{
int res;
struct smp_resp *disc_resp;
@@ -1849,7 +1849,7 @@ static int sas_find_bcast_dev(struct domain_device *dev,
SAS_DPRINTK("Expander phys DID NOT change\n");
}
list_for_each_entry(ch, &ex->children, siblings) {
- if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
+ if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
res = sas_find_bcast_dev(ch, src_dev);
if (*src_dev)
return res;
@@ -1866,8 +1866,8 @@ static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_devi
list_for_each_entry_safe(child, n, &ex->children, siblings) {
set_bit(SAS_DEV_GONE, &child->state);
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
sas_unregister_ex_tree(port, child);
else
sas_unregister_dev(port, child);
@@ -1887,8 +1887,8 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
if (SAS_ADDR(child->sas_addr) ==
SAS_ADDR(phy->attached_sas_addr)) {
set_bit(SAS_DEV_GONE, &child->state);
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
sas_unregister_ex_tree(parent->port, child);
else
sas_unregister_dev(parent->port, child);
@@ -1916,8 +1916,8 @@ static int sas_discover_bfs_by_root_level(struct domain_device *root,
int res = 0;
list_for_each_entry(child, &ex_root->children, siblings) {
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV) {
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
struct sas_expander_device *ex =
rphy_to_expander_device(child->rphy);
@@ -1970,8 +1970,8 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
list_for_each_entry(child, &dev->ex_dev.children, siblings) {
if (SAS_ADDR(child->sas_addr) ==
SAS_ADDR(ex_phy->attached_sas_addr)) {
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
res = sas_discover_bfs_by_root(child);
break;
}
@@ -1979,16 +1979,16 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
return res;
}
-static bool dev_type_flutter(enum sas_dev_type new, enum sas_dev_type old)
+static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old)
{
if (old == new)
return true;
/* treat device directed resets as flutter, if we went
- * SAS_END_DEV to SATA_PENDING the link needs recovery
+ * SAS_END_DEVICE to SAS_SATA_PENDING the link needs recovery
*/
- if ((old == SATA_PENDING && new == SAS_END_DEV) ||
- (old == SAS_END_DEV && new == SATA_PENDING))
+ if ((old == SAS_SATA_PENDING && new == SAS_END_DEVICE) ||
+ (old == SAS_END_DEVICE && new == SAS_SATA_PENDING))
return true;
return false;
@@ -1998,7 +1998,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
- enum sas_dev_type type = NO_DEVICE;
+ enum sas_device_type type = SAS_PHY_UNUSED;
u8 sas_addr[8];
int res;
@@ -2032,7 +2032,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
sas_ex_phy_discover(dev, phy_id);
- if (ata_dev && phy->attached_dev_type == SATA_PENDING)
+ if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
action = ", needs recovery";
SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n",
SAS_ADDR(dev->sas_addr), phy_id, action);
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 1de67964e5a..7e7ba83f0a2 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -131,16 +131,16 @@ static inline void sas_fill_in_rphy(struct domain_device *dev,
rphy->identify.initiator_port_protocols = dev->iproto;
rphy->identify.target_port_protocols = dev->tproto;
switch (dev->dev_type) {
- case SATA_DEV:
+ case SAS_SATA_DEV:
/* FIXME: need sata device type */
- case SAS_END_DEV:
- case SATA_PENDING:
+ case SAS_END_DEVICE:
+ case SAS_SATA_PENDING:
rphy->identify.device_type = SAS_END_DEVICE;
break;
- case EDGE_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
break;
- case FANOUT_DEV:
+ case SAS_FANOUT_EXPANDER_DEVICE:
rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
break;
default:
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index 1398b714c01..d3c5297c6c8 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -69,7 +69,7 @@ static void sas_resume_port(struct asd_sas_phy *phy)
continue;
}
- if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) {
+ if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
dev->ex_dev.ex_change_count = -1;
for (i = 0; i < dev->ex_dev.num_phys; i++) {
struct ex_phy *phy = &dev->ex_dev.ex_phy[i];
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 74550922ad5..7b7381d7671 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -254,7 +254,7 @@ static int mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
}
for (i = 0; i < MVS_MAX_DEVICES; i++) {
mvi->devices[i].taskfileset = MVS_ID_NOT_MAPPED;
- mvi->devices[i].dev_type = NO_DEVICE;
+ mvi->devices[i].dev_type = SAS_PHY_UNUSED;
mvi->devices[i].device_id = i;
mvi->devices[i].dev_status = MVS_DEV_NORMAL;
init_timer(&mvi->devices[i].timer);
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index 532110f4562..c9e244984e3 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -706,7 +706,7 @@ static int mvs_task_prep_ssp(struct mvs_info *mvi,
return 0;
}
-#define DEV_IS_GONE(mvi_dev) ((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE)))
+#define DEV_IS_GONE(mvi_dev) ((!mvi_dev || (mvi_dev->dev_type == SAS_PHY_UNUSED)))
static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf,
struct mvs_tmf_task *tmf, int *pass)
{
@@ -726,7 +726,7 @@ static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf
* libsas will use dev->port, should
* not call task_done for sata
*/
- if (dev->dev_type != SATA_DEV)
+ if (dev->dev_type != SAS_SATA_DEV)
task->task_done(task);
return rc;
}
@@ -1159,10 +1159,10 @@ void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st)
phy->identify.device_type =
phy->att_dev_info & PORT_DEV_TYPE_MASK;
- if (phy->identify.device_type == SAS_END_DEV)
+ if (phy->identify.device_type == SAS_END_DEVICE)
phy->identify.target_port_protocols =
SAS_PROTOCOL_SSP;
- else if (phy->identify.device_type != NO_DEVICE)
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
phy->identify.target_port_protocols =
SAS_PROTOCOL_SMP;
if (oob_done)
@@ -1260,7 +1260,7 @@ struct mvs_device *mvs_alloc_dev(struct mvs_info *mvi)
{
u32 dev;
for (dev = 0; dev < MVS_MAX_DEVICES; dev++) {
- if (mvi->devices[dev].dev_type == NO_DEVICE) {
+ if (mvi->devices[dev].dev_type == SAS_PHY_UNUSED) {
mvi->devices[dev].device_id = dev;
return &mvi->devices[dev];
}
@@ -1278,7 +1278,7 @@ void mvs_free_dev(struct mvs_device *mvi_dev)
u32 id = mvi_dev->device_id;
memset(mvi_dev, 0, sizeof(*mvi_dev));
mvi_dev->device_id = id;
- mvi_dev->dev_type = NO_DEVICE;
+ mvi_dev->dev_type = SAS_PHY_UNUSED;
mvi_dev->dev_status = MVS_DEV_NORMAL;
mvi_dev->taskfileset = MVS_ID_NOT_MAPPED;
}
@@ -1480,7 +1480,7 @@ static int mvs_debug_I_T_nexus_reset(struct domain_device *dev)
{
int rc;
struct sas_phy *phy = sas_get_local_phy(dev);
- int reset_type = (dev->dev_type == SATA_DEV ||
+ int reset_type = (dev->dev_type == SAS_SATA_DEV ||
(dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
rc = sas_phy_reset(phy, reset_type);
sas_put_local_phy(phy);
@@ -1629,7 +1629,7 @@ int mvs_abort_task(struct sas_task *task)
} else if (task->task_proto & SAS_PROTOCOL_SATA ||
task->task_proto & SAS_PROTOCOL_STP) {
- if (SATA_DEV == dev->dev_type) {
+ if (SAS_SATA_DEV == dev->dev_type) {
struct mvs_slot_info *slot = task->lldd_task;
u32 slot_idx = (u32)(slot - mvi->slot_info);
mv_dprintk("mvs_abort_task() mvi=%p task=%p "
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 9f3cc13a5ce..60e2fb7f2dc 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -67,7 +67,7 @@ extern const struct mvs_dispatch mvs_94xx_dispatch;
extern struct kmem_cache *mvs_task_list_cache;
#define DEV_IS_EXPANDER(type) \
- ((type == EDGE_DEV) || (type == FANOUT_DEV))
+ ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
#define bit(n) ((u64)1 << n)
@@ -241,7 +241,7 @@ struct mvs_phy {
struct mvs_device {
struct list_head dev_entry;
- enum sas_dev_type dev_type;
+ enum sas_device_type dev_type;
struct mvs_info *mvi_info;
struct domain_device *sas_device;
struct timer_list timer;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 95d04cc78c0..69dd49c05f1 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1505,7 +1505,7 @@ void pm8001_work_fn(struct work_struct *work)
pm8001_dev = pw->data; /* Most stash device structure */
if ((pm8001_dev == NULL)
|| ((pw->handler != IO_XFER_ERROR_BREAK)
- && (pm8001_dev->dev_type == NO_DEVICE))) {
+ && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) {
kfree(pw);
return;
}
@@ -3443,7 +3443,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
sizeof(struct dev_to_host_fis));
phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
- phy->identify.device_type = SATA_DEV;
+ phy->identify.device_type = SAS_SATA_DEV;
pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
pm8001_bytes_dmaed(pm8001_ha, phy_id);
@@ -4465,7 +4465,7 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
LINKMODE_AUTO | LINKRATE_15 |
LINKRATE_30 | LINKRATE_60 | phy_id);
- payload.sas_identify.dev_type = SAS_END_DEV;
+ payload.sas_identify.dev_type = SAS_END_DEVICE;
payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
memcpy(payload.sas_identify.sas_addr,
pm8001_ha->sas_addr, SAS_ADDR_SIZE);
@@ -4527,11 +4527,11 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
if (flag == 1)
stp_sspsmp_sata = 0x02; /*direct attached sata */
else {
- if (pm8001_dev->dev_type == SATA_DEV)
+ if (pm8001_dev->dev_type == SAS_SATA_DEV)
stp_sspsmp_sata = 0x00; /* stp*/
- else if (pm8001_dev->dev_type == SAS_END_DEV ||
- pm8001_dev->dev_type == EDGE_DEV ||
- pm8001_dev->dev_type == FANOUT_DEV)
+ else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+ pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
stp_sspsmp_sata = 0x01; /*ssp or smp*/
}
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
@@ -4662,9 +4662,9 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
PM8001_EH_DBG(pm8001_ha,
pm8001_printk("cmd_tag = %x, abort task tag = 0x%x",
cmd_tag, task_tag));
- if (pm8001_dev->dev_type == SAS_END_DEV)
+ if (pm8001_dev->dev_type == SAS_END_DEVICE)
opc = OPC_INB_SSP_ABORT;
- else if (pm8001_dev->dev_type == SATA_DEV)
+ else if (pm8001_dev->dev_type == SAS_SATA_DEV)
opc = OPC_INB_SATA_ABORT;
else
opc = OPC_INB_SMP_ABORT;/* SMP */
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 1c718520036..e4b9bc7f541 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -361,7 +361,7 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
for (i = 0; i < PM8001_MAX_DEVICES; i++) {
- pm8001_ha->devices[i].dev_type = NO_DEVICE;
+ pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
pm8001_ha->devices[i].id = i;
pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
pm8001_ha->devices[i].running_req = 0;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 9af95853f84..a85d73de7c8 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -357,7 +357,7 @@ static int sas_find_local_port_id(struct domain_device *dev)
* @tmf: the task management IU
*/
#define DEV_IS_GONE(pm8001_dev) \
- ((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
+ ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
static int pm8001_task_exec(struct sas_task *task, const int num,
gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
{
@@ -375,7 +375,7 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
struct task_status_struct *tsm = &t->task_status;
tsm->resp = SAS_TASK_UNDELIVERED;
tsm->stat = SAS_PHY_DOWN;
- if (dev->dev_type != SATA_DEV)
+ if (dev->dev_type != SAS_SATA_DEV)
t->task_done(t);
return 0;
}
@@ -553,7 +553,7 @@ struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
{
u32 dev;
for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
- if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
+ if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
pm8001_ha->devices[dev].id = dev;
return &pm8001_ha->devices[dev];
}
@@ -589,7 +589,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
u32 id = pm8001_dev->id;
memset(pm8001_dev, 0, sizeof(*pm8001_dev));
pm8001_dev->id = id;
- pm8001_dev->dev_type = NO_DEVICE;
+ pm8001_dev->dev_type = SAS_PHY_UNUSED;
pm8001_dev->device_id = PM8001_MAX_DEVICES;
pm8001_dev->sas_device = NULL;
}
@@ -647,7 +647,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
res = -1;
}
} else {
- if (dev->dev_type == SATA_DEV) {
+ if (dev->dev_type == SAS_SATA_DEV) {
pm8001_device->attached_phy =
dev->rphy->identify.phy_identifier;
flag = 1; /* directly sata*/
@@ -657,7 +657,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
wait_for_completion(&completion);
- if (dev->dev_type == SAS_END_DEV)
+ if (dev->dev_type == SAS_END_DEVICE)
msleep(50);
pm8001_ha->flags = PM8001F_RUN_TIME;
return 0;
@@ -927,7 +927,7 @@ void pm8001_open_reject_retry(
struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
pm8001_dev = ccb->device;
- if (!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE))
+ if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
continue;
if (!device_to_close) {
uintptr_t d = (uintptr_t)pm8001_dev
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 72d46ea398d..570819464d9 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -103,7 +103,7 @@ do { \
#define PM8001_READ_VPD
-#define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV))
+#define DEV_IS_EXPANDER(type) ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
#define PM8001_NAME_LENGTH 32/* generic length of strings */
extern struct list_head hba_list;
@@ -206,7 +206,7 @@ struct pm8001_phy {
};
struct pm8001_device {
- enum sas_dev_type dev_type;
+ enum sas_device_type dev_type;
struct domain_device *sas_device;
u32 attached_phy;
u32 id;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 670998a8ca7..302514d8157 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2684,7 +2684,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
sizeof(struct dev_to_host_fis));
phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
- phy->identify.device_type = SATA_DEV;
+ phy->identify.device_type = SAS_SATA_DEV;
pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
pm8001_bytes_dmaed(pm8001_ha, phy_id);
@@ -3952,7 +3952,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
**/
- payload.sas_identify.dev_type = SAS_END_DEV;
+ payload.sas_identify.dev_type = SAS_END_DEVICE;
payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
memcpy(payload.sas_identify.sas_addr,
pm8001_ha->sas_addr, SAS_ADDR_SIZE);
@@ -4015,11 +4015,11 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
if (flag == 1) {
stp_sspsmp_sata = 0x02; /*direct attached sata */
} else {
- if (pm8001_dev->dev_type == SATA_DEV)
+ if (pm8001_dev->dev_type == SAS_SATA_DEV)
stp_sspsmp_sata = 0x00; /* stp*/
- else if (pm8001_dev->dev_type == SAS_END_DEV ||
- pm8001_dev->dev_type == EDGE_DEV ||
- pm8001_dev->dev_type == FANOUT_DEV)
+ else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+ pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
stp_sspsmp_sata = 0x01; /*ssp or smp*/
}
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))