aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorMichael Chan <mchan@broadcom.com>2005-09-27 12:13:10 -0700
committerDavid S. Miller <davem@davemloft.net>2005-09-27 12:13:10 -0700
commitf9804ddbeec2ea709255830a8822bfb4e7584f6a (patch)
tree09aad8dd07b795540a718bb48f6f1c1a7f1c496d /drivers
parentc94e39418ab6eccf863581f4e0d847da0080b2d3 (diff)
[TG3]: misc. fixes
Fix interrupt test handler by adding check for IRQ assertion in PCI_STATE register in addition to the status block updated bit. Add test for valid ethernet address in tg3_set_mac_addr(). Add tg3_bus_string() to setup the PCI bus speed/width string for all PCI/PCIX/PCI Express devices. This is used to print the bus type during init_one(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/tg3.c53
1 files changed, 46 insertions, 7 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ef2f1fdd6f6..0ac8db25a65 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3389,7 +3389,8 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id,
struct tg3 *tp = netdev_priv(dev);
struct tg3_hw_status *sblk = tp->hw_status;
- if (sblk->status & SD_STATUS_UPDATED) {
+ if ((sblk->status & SD_STATUS_UPDATED) ||
+ !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
0x00000001);
return IRQ_RETVAL(1);
@@ -5395,6 +5396,9 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
struct tg3 *tp = netdev_priv(dev);
struct sockaddr *addr = p;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
spin_lock_bh(&tp->lock);
@@ -10349,6 +10353,44 @@ static char * __devinit tg3_phy_string(struct tg3 *tp)
};
}
+static char * __devinit tg3_bus_string(struct tg3 *tp, char *str)
+{
+ if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+ strcpy(str, "PCI Express");
+ return str;
+ } else if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+ u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL) & 0x1f;
+
+ strcpy(str, "PCIX:");
+
+ if ((clock_ctrl == 7) ||
+ ((tr32(GRC_MISC_CFG) & GRC_MISC_CFG_BOARD_ID_MASK) ==
+ GRC_MISC_CFG_BOARD_ID_5704CIOBE))
+ strcat(str, "133MHz");
+ else if (clock_ctrl == 0)
+ strcat(str, "33MHz");
+ else if (clock_ctrl == 2)
+ strcat(str, "50MHz");
+ else if (clock_ctrl == 4)
+ strcat(str, "66MHz");
+ else if (clock_ctrl == 6)
+ strcat(str, "100MHz");
+ else if (clock_ctrl == 7)
+ strcat(str, "133MHz");
+ } else {
+ strcpy(str, "PCI:");
+ if (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED)
+ strcat(str, "66MHz");
+ else
+ strcat(str, "33MHz");
+ }
+ if (tp->tg3_flags & TG3_FLAG_PCI_32BIT)
+ strcat(str, ":32-bit");
+ else
+ strcat(str, ":64-bit");
+ return str;
+}
+
static struct pci_dev * __devinit tg3_find_5704_peer(struct tg3 *tp)
{
struct pci_dev *peer;
@@ -10411,6 +10453,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
struct net_device *dev;
struct tg3 *tp;
int i, err, pci_using_dac, pm_cap;
+ char str[40];
if (tg3_version_printed++ == 0)
printk(KERN_INFO "%s", version);
@@ -10656,16 +10699,12 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
pci_set_drvdata(pdev, dev);
- printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (PCI%s:%s:%s) %sBaseT Ethernet ",
+ printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (%s) %sBaseT Ethernet ",
dev->name,
tp->board_part_number,
tp->pci_chip_rev_id,
tg3_phy_string(tp),
- ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "X" : ""),
- ((tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED) ?
- ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "133MHz" : "66MHz") :
- ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "100MHz" : "33MHz")),
- ((tp->tg3_flags & TG3_FLAG_PCI_32BIT) ? "32-bit" : "64-bit"),
+ tg3_bus_string(tp, str),
(tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100" : "10/100/1000");
for (i = 0; i < 6; i++)