Merge tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6

Pull battery subsystem updates from Anton Vorontsov:
 "Highlights:

   - Two new drivers from Pali Rohár and N900 hackers: rx51_battery and
     bq2415x_charger.  The drivers are a part of a solution to replace
     the proprietary Nokia BME stack

   - Power supply core now registers devices with a thermal cooling
     subsystem, so we can now automatically throttle charging.  Thanks
     to Ramakrishna Pallala!

   - Device tree support for ab8500 and max8925_power drivers

   - Random fixups and enhancements for a bunch of drivers."

* tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6: (22 commits)
  max8925_power: Add support for device-tree initialization
  ab8500: Add devicetree support for chargalg
  ab8500: Add devicetree support for charger
  ab8500: Add devicetree support for btemp
  ab8500: Add devicetree support for fuelgauge
  twl4030_charger: Change TWL4030_MODULE_* ids to TWL_MODULE_*
  jz4740-battery: Use devm_request_and_ioremap
  jz4740-battery: Use devm_kzalloc
  bq27x00_battery: Fixup nominal available capacity reporting
  bq2415x_charger: Fix style issues
  bq2415x_charger: Add Kconfig/Makefile entries
  power_supply: Add bq2415x charger driver
  power_supply: Add new Nokia RX-51 (N900) power supply battery driver
  max17042_battery: Fix missing verify_model_lock() return value check
  ds2782_battery: Fix signedness bug in ds278x_read_reg16()
  lp8788-charger: Fix ADC channel names
  lp8788-charger: Fix wrong ADC conversion
  lp8788-charger: Use consumer device name on setting IIO channels
  power_supply: Register power supply for thermal cooling device
  power_supply: Add support for CHARGE_CONTROL_* attributes
  ...

1 files changed, 95 insertions, 0 deletions

diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h
new file mode 100644
index 00000000000..97a1665eaea
--- /dev/null
+++ b/include/linux/power/bq2415x_charger.h
@@ -0,0 +1,95 @@
+/*
+ * bq2415x charger driver
+ *
+ * Copyright (C) 2011-2012  Pali Rohár <pali.rohar@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef BQ2415X_CHARGER_H
+#define BQ2415X_CHARGER_H
+
+/*
+ * This is platform data for bq2415x chip. It contains default board
+ * voltages and currents which can be also later configured via sysfs. If
+ * value is -1 then default chip value (specified in datasheet) will be
+ * used.
+ *
+ * Value resistor_sense is needed for for configuring charge and
+ * termination current. It it is less or equal to zero, configuring charge
+ * and termination current will not be possible.
+ *
+ * Function set_mode_hook is needed for automode (setting correct current
+ * limit when charger is connected/disconnected or setting boost mode).
+ * When is NULL, automode function is disabled. When is not NULL, it must
+ * have this prototype:
+ *
+ *    int (*set_mode_hook)(
+ *      void (*hook)(enum bq2415x_mode mode, void *data),
+ *      void *data)
+ *
+ * hook is hook function (see below) and data is pointer to driver private
+ * data
+ *
+ * bq2415x driver will call it as:
+ *
+ *    platform_data->set_mode_hook(bq2415x_hook_function, bq2415x_device);
+ *
+ * Board/platform function set_mode_hook return non zero value when hook
+ * function was successful registered. Platform code should call that hook
+ * function (which get from pointer, with data) every time when charger
+ * was connected/disconnected or require to enable boost mode. bq2415x
+ * driver then will set correct current limit, enable/disable charger or
+ * boost mode.
+ *
+ * Hook function has this prototype:
+ *
+ *    void hook(enum bq2415x_mode mode, void *data);
+ *
+ * mode is bq2415x mode (charger or boost)
+ * data is pointer to driver private data (which get from
+ * set_charger_type_hook)
+ *
+ * When bq driver is being unloaded, it call function:
+ *
+ *    platform_data->set_mode_hook(NULL, NULL);
+ *
+ * (hook function and driver private data are NULL)
+ *
+ * After that board/platform code must not call driver hook function! It
+ * is possible that pointer to hook function will not be valid and calling
+ * will cause undefined result.
+ */
+
+/* Supported modes with maximal current limit */
+enum bq2415x_mode {
+	BQ2415X_MODE_NONE,		/* unknown or no charger (100mA) */
+	BQ2415X_MODE_HOST_CHARGER,	/* usb host/hub charger (500mA) */
+	BQ2415X_MODE_DEDICATED_CHARGER, /* dedicated charger (unlimited) */
+	BQ2415X_MODE_BOOST,		/* boost mode (charging disabled) */
+};
+
+struct bq2415x_platform_data {
+	int current_limit;		/* mA */
+	int weak_battery_voltage;	/* mV */
+	int battery_regulation_voltage;	/* mV */
+	int charge_current;		/* mA */
+	int termination_current;	/* mA */
+	int resistor_sense;		/* m ohm */
+	int (*set_mode_hook)(void (*hook)(enum bq2415x_mode mode, void *data),
+			     void *data);
+};
+
+#endif