Merge master.kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6

9 files changed, 214 insertions, 53 deletions

diff --git a/include/linux/jffs2_fs_sb.h b/include/linux/jffs2_fs_sb.h
index 4afc8d8c2e9..1e21546622d 100644
--- a/include/linux/jffs2_fs_sb.h
+++ b/include/linux/jffs2_fs_sb.h
@@ -1,4 +1,4 @@
-/* $Id: jffs2_fs_sb.h,v 1.48 2004/11/20 10:41:12 dwmw2 Exp $ */
+/* $Id: jffs2_fs_sb.h,v 1.52 2005/05/19 16:12:17 gleixner Exp $ */
 
 #ifndef _JFFS2_FS_SB
 #define _JFFS2_FS_SB
@@ -14,7 +14,8 @@
 #include <linux/rwsem.h>
 
 #define JFFS2_SB_FLAG_RO 1
-#define JFFS2_SB_FLAG_MOUNTING 2
+#define JFFS2_SB_FLAG_SCANNING 2 /* Flash scanning is in progress */
+#define JFFS2_SB_FLAG_BUILDING 4 /* File system building is in progress */
 
 struct jffs2_inodirty;
 
@@ -31,7 +32,7 @@ struct jffs2_sb_info {
 	unsigned int flags;
 
 	struct task_struct *gc_task;	/* GC task struct */
-	struct semaphore gc_thread_start; /* GC thread start mutex */
+	struct completion gc_thread_start; /* GC thread start completion */
 	struct completion gc_thread_exit; /* GC thread exit completion port */
 
 	struct semaphore alloc_sem;	/* Used to protect all the following 
@@ -94,7 +95,7 @@ struct jffs2_sb_info {
 	   to an obsoleted node. I don't like this. Alternatives welcomed. */
 	struct semaphore erase_free_sem;
 
-#if defined CONFIG_JFFS2_FS_NAND || defined CONFIG_JFFS2_FS_NOR_ECC
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
 	/* Write-behind buffer for NAND flash */
 	unsigned char *wbuf;
 	uint32_t wbuf_ofs;
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 2ed8c585021..e6b6a1c66bd 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -1,7 +1,7 @@
 
 /* Common Flash Interface structures 
  * See http://support.intel.com/design/flash/technote/index.htm
- * $Id: cfi.h,v 1.50 2004/11/20 12:46:51 dwmw2 Exp $
+ * $Id: cfi.h,v 1.54 2005/06/06 23:04:36 tpoynor Exp $
  */
 
 #ifndef __MTD_CFI_H__
@@ -148,6 +148,14 @@ struct cfi_pri_intelext {
 	uint8_t  extra[0];
 } __attribute__((packed));
 
+struct cfi_intelext_otpinfo {
+	uint32_t ProtRegAddr;
+	uint16_t FactGroups;
+	uint8_t  FactProtRegSize;
+	uint16_t UserGroups;
+	uint8_t  UserProtRegSize;
+} __attribute__((packed));
+
 struct cfi_intelext_blockinfo {
 	uint16_t NumIdentBlocks;
 	uint16_t BlockSize;
@@ -244,7 +252,7 @@ static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, int interleave, int
  * It looks too long to be inline, but in the common case it should almost all
  * get optimised away. 
  */
-static inline map_word cfi_build_cmd(u_char cmd, struct map_info *map, struct cfi_private *cfi)
+static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi)
 {
 	map_word val = { {0} };
 	int wordwidth, words_per_bus, chip_mode, chips_per_word;
@@ -307,6 +315,69 @@ static inline map_word cfi_build_cmd(u_char cmd, struct map_info *map, struct cf
 }
 #define CMD(x)  cfi_build_cmd((x), map, cfi)
 
+
+static inline unsigned char cfi_merge_status(map_word val, struct map_info *map, 
+					   struct cfi_private *cfi)
+{
+	int wordwidth, words_per_bus, chip_mode, chips_per_word;
+	unsigned long onestat, res = 0;
+	int i;
+
+	/* We do it this way to give the compiler a fighting chance 
+	   of optimising away all the crap for 'bankwidth' larger than
+	   an unsigned long, in the common case where that support is
+	   disabled */
+	if (map_bankwidth_is_large(map)) {
+		wordwidth = sizeof(unsigned long);
+		words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+	} else {
+		wordwidth = map_bankwidth(map);
+		words_per_bus = 1;
+	}
+	
+	chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+	chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+	onestat = val.x[0];
+	/* Or all status words together */
+	for (i=1; i < words_per_bus; i++) {
+		onestat |= val.x[i];
+	}
+
+	res = onestat;
+	switch(chips_per_word) {
+	default: BUG();
+#if BITS_PER_LONG >= 64
+	case 8:
+		res |= (onestat >> (chip_mode * 32));
+#endif
+	case 4:
+		res |= (onestat >> (chip_mode * 16));
+	case 2:
+		res |= (onestat >> (chip_mode * 8));
+	case 1:
+		;
+	}
+
+	/* Last, determine what the bit-pattern should be for a single
+	   device, according to chip mode and endianness... */
+	switch (chip_mode) {
+	case 1:
+		break;
+	case 2:
+		res = cfi16_to_cpu(res);
+		break;
+	case 4:
+		res = cfi32_to_cpu(res);
+		break;
+	default: BUG();
+	}
+	return res;
+}
+
+#define MERGESTATUS(x) cfi_merge_status((x), map, cfi)
+
+
 /*
  * Sends a CFI command to a bank of flash for the given geometry.
  *
@@ -357,16 +428,6 @@ static inline void cfi_udelay(int us)
 	}
 }
 
-static inline void cfi_spin_lock(spinlock_t *mutex)
-{
-	spin_lock_bh(mutex);
-}
-
-static inline void cfi_spin_unlock(spinlock_t *mutex)
-{
-	spin_unlock_bh(mutex);
-}
-
 struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size,
 			     const char* name);
 struct cfi_fixup {
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index c66ba812bf9..675776fa3e2 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -6,7 +6,7 @@
  *
  * (C) 2000 Red Hat. GPLd.
  *
- * $Id: flashchip.h,v 1.15 2004/11/05 22:41:06 nico Exp $
+ * $Id: flashchip.h,v 1.17 2005/03/14 18:27:15 bjd Exp $
  *
  */
 
@@ -29,6 +29,7 @@ typedef enum {
 	FL_ERASE_SUSPENDED,
 	FL_WRITING,
 	FL_WRITING_TO_BUFFER,
+	FL_OTP_WRITE,
 	FL_WRITE_SUSPENDING,
 	FL_WRITE_SUSPENDED,
 	FL_PM_SUSPENDED,
@@ -62,8 +63,8 @@ struct flchip {
 	flstate_t state;
 	flstate_t oldstate;
 
-	int write_suspended:1;
-	int erase_suspended:1;
+	unsigned int write_suspended:1;
+	unsigned int erase_suspended:1;
 	unsigned long in_progress_block_addr;
 
 	spinlock_t *mutex;
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index b52c8cbd235..0268125a627 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -3,7 +3,7 @@
  *
  *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
  *
- *	$Id: inftl.h,v 1.6 2004/06/30 14:49:00 dbrown Exp $
+ *	$Id: inftl.h,v 1.7 2005/06/13 13:08:45 sean Exp $
  */
 
 #ifndef __MTD_INFTL_H__
@@ -20,7 +20,7 @@
 #include <mtd/inftl-user.h>
 
 #ifndef INFTL_MAJOR
-#define INFTL_MAJOR 94
+#define INFTL_MAJOR 96
 #endif
 #define INFTL_PARTN_BITS 4
 
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index f0268b99c90..142963f01d2 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -1,6 +1,6 @@
 
 /* Overhauled routines for dealing with different mmap regions of flash */
-/* $Id: map.h,v 1.46 2005/01/05 17:09:44 dwmw2 Exp $ */
+/* $Id: map.h,v 1.52 2005/05/25 10:29:41 gleixner Exp $ */
 
 #ifndef __LINUX_MTD_MAP_H__
 #define __LINUX_MTD_MAP_H__
@@ -263,6 +263,17 @@ static inline map_word map_word_and(struct map_info *map, map_word val1, map_wor
 	return r;
 }
 
+static inline map_word map_word_clr(struct map_info *map, map_word val1, map_word val2)
+{
+	map_word r;
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		r.x[i] = val1.x[i] & ~val2.x[i];
+	}
+	return r;
+}
+
 static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2)
 {
 	map_word r;
@@ -273,6 +284,7 @@ static inline map_word map_word_or(struct map_info *map, map_word val1, map_word
 	}
 	return r;
 }
+
 #define map_word_andequal(m, a, b, z) map_word_equal(m, z, map_word_and(m, a, b))
 
 static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2)
@@ -328,16 +340,27 @@ static inline map_word map_word_load_partial(struct map_info *map, map_word orig
 	return orig;
 }
 
+#if BITS_PER_LONG < 64
+#define MAP_FF_LIMIT 4
+#else
+#define MAP_FF_LIMIT 8
+#endif
+
 static inline map_word map_word_ff(struct map_info *map)
 {
 	map_word r;
 	int i;
-
-	for (i=0; i<map_words(map); i++) {
-		r.x[i] = ~0UL;
+	
+	if (map_bankwidth(map) < MAP_FF_LIMIT) {
+		int bw = 8 * map_bankwidth(map);
+		r.x[0] = (1 << bw) - 1;
+	} else {
+		for (i=0; i<map_words(map); i++)
+			r.x[i] = ~0UL;
 	}
 	return r;
 }
+
 static inline map_word inline_map_read(struct map_info *map, unsigned long ofs)
 {
 	map_word r;
@@ -405,7 +428,7 @@ extern void simple_map_init(struct map_info *);
 
 
 #define simple_map_init(map) BUG_ON(!map_bankwidth_supported((map)->bankwidth))
-#define map_is_linear(map) (1)
+#define map_is_linear(map) ({ (void)(map); 1; })
 
 #endif /* !CONFIG_MTD_COMPLEX_MAPPINGS */
 
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index b3d134392b3..c50c3f3927d 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,5 +1,5 @@
 /* 
- * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $
+ * $Id: mtd.h,v 1.59 2005/04/11 10:19:02 gleixner Exp $
  *
  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
  *
@@ -18,6 +18,7 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/uio.h>
+#include <linux/notifier.h>
 
 #include <linux/mtd/compatmac.h>
 #include <mtd/mtd-abi.h>
@@ -69,7 +70,6 @@ struct mtd_info {
 
 	u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
 	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
-	u_int32_t oobavail;  // Number of bytes in OOB area available for fs 
 	u_int32_t ecctype;
 	u_int32_t eccsize;
 	
@@ -80,6 +80,7 @@ struct mtd_info {
 
 	// oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
 	struct nand_oobinfo oobinfo;
+	u_int32_t oobavail;  // Number of bytes in OOB area available for fs 
 
 	/* Data for variable erase regions. If numeraseregions is zero,
 	 * it means that the whole device has erasesize as given above. 
@@ -113,12 +114,12 @@ struct mtd_info {
 	 * flash devices. The user data is one time programmable but the
 	 * factory data is read only. 
 	 */
-	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-
+	int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
 	int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-
-	/* This function is not yet implemented */
+	int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
+	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 	int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
 
 	/* kvec-based read/write methods. We need these especially for NAND flash,
 	   with its limited number of write cycles per erase.
@@ -147,6 +148,8 @@ struct mtd_info {
 	int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
 	int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
 
+	struct notifier_block reboot_notifier;  /* default mode before reboot */
+
 	void *priv;
 
 	struct module *owner;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9a19c65abd7..9b5b7621758 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -5,7 +5,7 @@
  *                     Steven J. Hill <sjhill@realitydiluted.com>
  *		       Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $
+ * $Id: nand.h,v 1.73 2005/05/31 19:39:17 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -48,6 +48,10 @@
  *  02-08-2004 tglx 	added option field to nand structure for chip anomalities
  *  05-25-2004 tglx 	added bad block table support, ST-MICRO manufacturer id
  *			update of nand_chip structure description
+ *  01-17-2005 dmarlin	added extended commands for AG-AND device and added option 
+ * 			for BBT_AUTO_REFRESH.
+ *  01-20-2005 dmarlin	added optional pointer to hardware specific callback for 
+ *			extra error status checks.
  */
 #ifndef __LINUX_MTD_NAND_H
 #define __LINUX_MTD_NAND_H
@@ -115,6 +119,25 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 #define NAND_CMD_READSTART	0x30
 #define NAND_CMD_CACHEDPROG	0x15
 
+/* Extended commands for AG-AND device */
+/* 
+ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but 
+ *       there is no way to distinguish that from NAND_CMD_READ0
+ *       until the remaining sequence of commands has been completed
+ *       so add a high order bit and mask it off in the command.
+ */
+#define NAND_CMD_DEPLETE1	0x100
+#define NAND_CMD_DEPLETE2	0x38
+#define NAND_CMD_STATUS_MULTI	0x71
+#define NAND_CMD_STATUS_ERROR	0x72
+/* multi-bank error status (banks 0-3) */
+#define NAND_CMD_STATUS_ERROR0	0x73
+#define NAND_CMD_STATUS_ERROR1	0x74
+#define NAND_CMD_STATUS_ERROR2	0x75
+#define NAND_CMD_STATUS_ERROR3	0x76
+#define NAND_CMD_STATUS_RESET	0x7f
+#define NAND_CMD_STATUS_CLEAR	0xff
+
 /* Status bits */
 #define NAND_STATUS_FAIL	0x01
 #define NAND_STATUS_FAIL_N1	0x02
@@ -143,7 +166,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 
 /*
  * Constants for Hardware ECC
-*/
+ */
 /* Reset Hardware ECC for read */
 #define NAND_ECC_READ		0
 /* Reset Hardware ECC for write */
@@ -151,6 +174,10 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 /* Enable Hardware ECC before syndrom is read back from flash */
 #define NAND_ECC_READSYN	2
 
+/* Bit mask for flags passed to do_nand_read_ecc */
+#define NAND_GET_DEVICE		0x80
+
+
 /* Option constants for bizarre disfunctionality and real
 *  features
 */
@@ -170,6 +197,10 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 /* Chip has a array of 4 pages which can be read without
  * additional ready /busy waits */
 #define NAND_4PAGE_ARRAY	0x00000040 
+/* Chip requires that BBT is periodically rewritten to prevent
+ * bits from adjacent blocks from 'leaking' in altering data.
+ * This happens with the Renesas AG-AND chips, possibly others.  */
+#define BBT_AUTO_REFRESH	0x00000080
 
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS \
@@ -192,7 +223,8 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
  * This can only work if we have the ecc bytes directly behind the 
  * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
 #define NAND_HWECC_SYNDROME	0x00020000
-
+/* This option skips the bbt scan during initialization. */
+#define NAND_SKIP_BBTSCAN	0x00040000
 
 /* Options set by nand scan */
 /* Nand scan has allocated oob_buf */
@@ -221,10 +253,13 @@ struct nand_chip;
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices
  * @lock:               protection lock  
  * @active:		the mtd device which holds the controller currently
+ * @wq:			wait queue to sleep on if a NAND operation is in progress
+ *                      used instead of the per chip wait queue when a hw controller is available
  */
 struct nand_hw_control {
 	spinlock_t	 lock;
 	struct nand_chip *active;
+	wait_queue_head_t wq;
 };
 
 /**
@@ -283,6 +318,8 @@ struct nand_hw_control {
  * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial bad block scan 
  * @controller:		[OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices
  * @priv:		[OPTIONAL] pointer to private chip date
+ * @errstat:		[OPTIONAL] hardware specific function to perform additional error status checks 
+ *			(determine if errors are correctable)
  */
  
 struct nand_chip {
@@ -338,6 +375,7 @@ struct nand_chip {
 	struct nand_bbt_descr	*badblock_pattern;
 	struct nand_hw_control  *controller;
 	void		*priv;
+	int		(*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
 };
 
 /*
@@ -349,6 +387,7 @@ struct nand_chip {
 #define NAND_MFR_NATIONAL	0x8f
 #define NAND_MFR_RENESAS	0x07
 #define NAND_MFR_STMICRO	0x20
+#define NAND_MFR_HYNIX          0xad
 
 /**
  * struct nand_flash_dev - NAND Flash Device ID Structure
@@ -459,6 +498,9 @@ extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs);
 extern int nand_default_bbt (struct mtd_info *mtd);
 extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt);
 extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
+extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
+                             size_t * retlen, u_char * buf, u_char * oob_buf,
+                             struct nand_oobinfo *oobsel, int flags);
 
 /*
 * Constants for oob configuration
diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h
new file mode 100644
index 00000000000..2332eda07e0
--- /dev/null
+++ b/include/linux/mtd/plat-ram.h
@@ -0,0 +1,35 @@
+/* linux/include/mtd/plat-ram.h
+ *
+ * (c) 2004 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platform device based RAM map
+ *
+ * $Id: plat-ram.h,v 1.2 2005/01/24 00:37:40 bjd Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_MTD_PLATRAM_H
+#define __LINUX_MTD_PLATRAM_H __FILE__
+
+#define PLATRAM_RO (0)
+#define PLATRAM_RW (1)
+
+struct platdata_mtd_ram {
+	char			*mapname;
+	char		       **probes;
+	struct mtd_partition	*partitions;
+	int			 nr_partitions;
+	int			 bankwidth;
+
+	/* control callbacks */
+
+	void	(*set_rw)(struct device *dev, int to);
+};
+
+#endif /* __LINUX_MTD_PLATRAM_H */
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index fc071125cbc..7b7deef6b18 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -58,22 +58,16 @@
  * 		returned value is <= the real elapsed time.
  * 	note 2: this should be able to cope with a few seconds without
  * 		overflowing.
+ *
+ * xip_iprefetch()
+ *  
+ *      Macro to fill instruction prefetch
+ *	e.g. a series of nops:  asm volatile (".rep 8; nop; .endr"); 
  */
 
-#if defined(CONFIG_ARCH_SA1100) || defined(CONFIG_ARCH_PXA)
-
-#include <asm/hardware.h>
-#ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
-#endif
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+#include <asm/mtd-xip.h>
 
-#else
+#ifndef xip_irqpending
 
 #warning "missing IRQ and timer primitives for XIP MTD support"
 #warning "some of the XIP MTD support code will be disabled"
@@ -85,16 +79,17 @@
 
 #endif
 
+#ifndef xip_iprefetch
+#define xip_iprefetch()		do { } while (0)
+#endif
+
 /*
  * xip_cpu_idle() is used when waiting for a delay equal or larger than
  * the system timer tick period.  This should put the CPU into idle mode
  * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
+ * This should not rely upon standard kernel code.
  */
-
-#if defined(CONFIG_CPU_XSCALE)
-#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-#else
+#ifndef xip_cpu_idle
 #define xip_cpu_idle()  do { } while (0)
 #endif