aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorJohn W. Linville <linville@tuxdriver.com>2010-08-25 14:51:42 -0400
committerJohn W. Linville <linville@tuxdriver.com>2010-08-25 14:51:42 -0400
commite569aa78ba01f7f66e016a4d57310fd041524d17 (patch)
treeeaedc03d42ee2bf6200fc07b080a99bad103def3 /include
parent4562487a00445eab96311365ba15c41dc4d043cd (diff)
parent268bae0b6879f238ba57f5f801958d1254e136f7 (diff)
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts: drivers/net/wireless/libertas/if_sdio.c
Diffstat (limited to 'include')
-rw-r--r--include/linux/netdevice.h2
-rw-r--r--include/linux/nl80211.h150
-rw-r--r--include/linux/ssb/ssb_regs.h1
-rw-r--r--include/net/cfg80211.h179
-rw-r--r--include/net/mac80211.h60
5 files changed, 317 insertions, 75 deletions
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 59962dbc275..0cf9448a32c 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2171,6 +2171,8 @@ extern void dev_seq_stop(struct seq_file *seq, void *v);
extern int netdev_class_create_file(struct class_attribute *class_attr);
extern void netdev_class_remove_file(struct class_attribute *class_attr);
+extern struct kobj_ns_type_operations net_ns_type_operations;
+
extern char *netdev_drivername(const struct net_device *dev, char *buffer, int len);
extern void linkwatch_run_queue(void);
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2c870168733..ec1690da784 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -40,6 +40,43 @@
*/
/**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * management entities such as wpa_supplicant react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+ *
+ * Frame registration is done on a per-interface basis and registrations
+ * cannot be removed other than by closing the socket. It is possible to
+ * specify a registration filter to register, for example, only for a
+ * certain type of action frame. In particular with action frames, those
+ * that userspace registers for will not be returned as unhandled by the
+ * driver, so that the registered application has to take responsibility
+ * for doing that.
+ *
+ * The type of frame that can be registered for is also dependent on the
+ * driver and interface type. The frame types are advertised in wiphy
+ * attributes so applications know what to expect.
+ *
+ * NOTE: When an interface changes type while registrations are active,
+ * these registrations are ignored until the interface type is
+ * changed again. This means that changing the interface type can
+ * lead to a situation that couldn't otherwise be produced, but
+ * any such registrations will be dormant in the sense that they
+ * will not be serviced, i.e. they will not receive any frames.
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+ * but many frames can be transmitted. When a frame was transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -301,16 +338,20 @@
* rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
* and @NL80211_ATTR_TX_RATES the set of allowed rates.
*
- * @NL80211_CMD_REGISTER_ACTION: Register for receiving certain action frames
- * (via @NL80211_CMD_ACTION) for processing in userspace. This command
- * requires an interface index and a match attribute containing the first
- * few bytes of the frame that should match, e.g. a single byte for only
- * a category match or four bytes for vendor frames including the OUI.
- * The registration cannot be dropped, but is removed automatically
- * when the netlink socket is closed. Multiple registrations can be made.
- * @NL80211_CMD_ACTION: Action frame TX request and RX notification. This
- * command is used both as a request to transmit an Action frame and as an
- * event indicating reception of an Action frame that was not processed in
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
+ * (via @NL80211_CMD_FRAME) for processing in userspace. This command
+ * requires an interface index, a frame type attribute (optional for
+ * backward compatibility reasons, if not given assumes action frames)
+ * and a match attribute containing the first few bytes of the frame
+ * that should match, e.g. a single byte for only a category match or
+ * four bytes for vendor frames including the OUI. The registration
+ * cannot be dropped, but is removed automatically when the netlink
+ * socket is closed. Multiple registrations can be made.
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
+ * backward compatibility
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
+ * command is used both as a request to transmit a management frame and
+ * as an event indicating reception of a frame that was not processed in
* kernel code, but is for us (i.e., which may need to be processed in a
* user space application). %NL80211_ATTR_FRAME is used to specify the
* frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
@@ -320,11 +361,14 @@
* operational channel). When called, this operation returns a cookie
* (%NL80211_ATTR_COOKIE) that will be included with the TX status event
* pertaining to the TX request.
- * @NL80211_CMD_ACTION_TX_STATUS: Report TX status of an Action frame
- * transmitted with %NL80211_CMD_ACTION. %NL80211_ATTR_COOKIE identifies
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
+ * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
* the TX command and %NL80211_ATTR_FRAME includes the contents of the
* frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
* the frame.
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
+ * backward compatibility.
* @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
* is used to configure connection quality monitoring notification trigger
* levels.
@@ -429,9 +473,12 @@ enum nl80211_commands {
NL80211_CMD_SET_TX_BITRATE_MASK,
- NL80211_CMD_REGISTER_ACTION,
- NL80211_CMD_ACTION,
- NL80211_CMD_ACTION_TX_STATUS,
+ NL80211_CMD_REGISTER_FRAME,
+ NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
+ NL80211_CMD_FRAME,
+ NL80211_CMD_ACTION = NL80211_CMD_FRAME,
+ NL80211_CMD_FRAME_TX_STATUS,
+ NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
NL80211_CMD_SET_POWER_SAVE,
NL80211_CMD_GET_POWER_SAVE,
@@ -708,7 +755,16 @@ enum nl80211_commands {
* is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
*
* @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- * at least one byte, currently used with @NL80211_CMD_REGISTER_ACTION.
+ * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
+ * @NL80211_CMD_REGISTER_FRAME command.
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
+ * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ * information about which frame types can be transmitted with
+ * %NL80211_CMD_FRAME.
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
+ * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ * information about which frame types can be registered for RX.
*
* @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
* acknowledged by the recipient.
@@ -891,6 +947,10 @@ enum nl80211_attrs {
NL80211_ATTR_WIPHY_TX_POWER_SETTING,
NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
+ NL80211_ATTR_TX_FRAME_TYPES,
+ NL80211_ATTR_RX_FRAME_TYPES,
+ NL80211_ATTR_FRAME_TYPE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -947,7 +1007,7 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @__NL80211_IFTYPE_AFTER_LAST: internal use
+ * @NUM_NL80211_IFTYPES: number of defined interface types
*
* These values are used with the %NL80211_ATTR_IFTYPE
* to set the type of an interface.
@@ -964,8 +1024,8 @@ enum nl80211_iftype {
NL80211_IFTYPE_MESH_POINT,
/* keep last */
- __NL80211_IFTYPE_AFTER_LAST,
- NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1
+ NUM_NL80211_IFTYPES,
+ NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
};
/**
@@ -974,11 +1034,14 @@ enum nl80211_iftype {
* Station flags. When a station is added to an AP interface, it is
* assumed to be already associated (and hence authenticated.)
*
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
* @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
* @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
* with short barker preamble
* @NL80211_STA_FLAG_WME: station is WME/QoS capable
* @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
enum nl80211_sta_flags {
__NL80211_STA_FLAG_INVALID,
@@ -1091,14 +1154,17 @@ enum nl80211_mpath_flags {
* information about a mesh path.
*
* @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_ATTR_MPATH_SN: destination sequence number
- * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
- * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_MPATH_INFO_SN: destination sequence number
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
* &enum nl80211_mpath_flags;
- * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+ * currently defind
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
*/
enum nl80211_mpath_info {
__NL80211_MPATH_INFO_INVALID,
@@ -1127,6 +1193,8 @@ enum nl80211_mpath_info {
* @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
* @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
* @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
*/
enum nl80211_band_attr {
__NL80211_BAND_ATTR_INVALID,
@@ -1147,6 +1215,7 @@ enum nl80211_band_attr {
/**
* enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
* @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
* regulatory domain.
@@ -1158,6 +1227,9 @@ enum nl80211_band_attr {
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
* (100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ * currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
@@ -1177,9 +1249,13 @@ enum nl80211_frequency_attr {
/**
* enum nl80211_bitrate_attr - bitrate attributes
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
* @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
* in 2.4 GHz band.
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
+ * currently defined
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
*/
enum nl80211_bitrate_attr {
__NL80211_BITRATE_ATTR_INVALID,
@@ -1235,6 +1311,7 @@ enum nl80211_reg_type {
/**
* enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
* considerations for a given frequency range. These are the
* &enum nl80211_reg_rule_flags.
@@ -1251,6 +1328,9 @@ enum nl80211_reg_type {
* If you don't have one then don't send this.
* @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
* a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ * currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
*/
enum nl80211_reg_rule_attr {
__NL80211_REG_RULE_ATTR_INVALID,
@@ -1302,6 +1382,9 @@ enum nl80211_reg_rule_flags {
* @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ * currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
*/
enum nl80211_survey_info {
__NL80211_SURVEY_INFO_INVALID,
@@ -1466,6 +1549,7 @@ enum nl80211_channel_type {
* enum nl80211_bss - netlink attributes for a BSS
*
* @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
* @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
* @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
* @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
@@ -1509,6 +1593,12 @@ enum nl80211_bss {
/**
* enum nl80211_bss_status - BSS "status"
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+ *
+ * The BSS status is a BSS attribute in scan dumps, which
+ * indicates the status the interface has wrt. this BSS.
*/
enum nl80211_bss_status {
NL80211_BSS_STATUS_AUTHENTICATED,
@@ -1619,8 +1709,8 @@ enum nl80211_tx_rate_attributes {
/**
* enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ - 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz)
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
*/
enum nl80211_band {
NL80211_BAND_2GHZ,
@@ -1658,9 +1748,9 @@ enum nl80211_attr_cqm {
/**
* enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW - The RSSI level is lower than the
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
* configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH - The RSSI is higher than the
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
* configured threshold
*/
enum nl80211_cqm_rssi_threshold_event {
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index a6d5225b927..11daf9c140e 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -97,6 +97,7 @@
#define SSB_TMSLOW_RESET 0x00000001 /* Reset */
#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
+#define SSB_TMSLOW_PHYCLK 0x00000010 /* MAC PHY Clock Control Enable */
#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
#define SSB_TMSLOW_PE 0x40000000 /* Power Management Enable */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2fd06c60ffb..f2740537b5d 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -25,6 +25,43 @@
#include <linux/wireless.h>
+/**
+ * DOC: Introduction
+ *
+ * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
+ * userspace and drivers, and offers some utility functionality associated
+ * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
+ * by all modern wireless drivers in Linux, so that they offer a consistent
+ * API through nl80211. For backward compatibility, cfg80211 also offers
+ * wireless extensions to userspace, but hides them from drivers completely.
+ *
+ * Additionally, cfg80211 contains code to help enforce regulatory spectrum
+ * use restrictions.
+ */
+
+
+/**
+ * DOC: Device registration
+ *
+ * In order for a driver to use cfg80211, it must register the hardware device
+ * with cfg80211. This happens through a number of hardware capability structs
+ * described below.
+ *
+ * The fundamental structure for each device is the 'wiphy', of which each
+ * instance describes a physical wireless device connected to the system. Each
+ * such wiphy can have zero, one, or many virtual interfaces associated with
+ * it, which need to be identified as such by pointing the network interface's
+ * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
+ * the wireless part of the interface, normally this struct is embedded in the
+ * network interface's private data area. Drivers can optionally allow creating
+ * or destroying virtual interfaces on the fly, but without at least one or the
+ * ability to create some the wireless device isn't useful.
+ *
+ * Each wiphy structure contains device capability information, and also has
+ * a pointer to the various operations the driver offers. The definitions and
+ * structures here describe these capabilities in detail.
+ */
+
/*
* wireless hardware capability structures
*/
@@ -205,6 +242,21 @@ struct ieee80211_supported_band {
*/
/**
+ * DOC: Actions and configuration
+ *
+ * Each wireless device and each virtual interface offer a set of configuration
+ * operations and other actions that are invoked by userspace. Each of these
+ * actions is described in the operations structure, and the parameters these
+ * operations use are described separately.
+ *
+ * Additionally, some operations are asynchronous and expect to get status
+ * information via some functions that drivers need to call.
+ *
+ * Scanning and BSS list handling with its associated functionality is described
+ * in a separate chapter.
+ */
+
+/**
* struct vif_params - describes virtual interface parameters
* @mesh_id: mesh ID to use
* @mesh_id_len: length of the mesh ID
@@ -570,8 +622,28 @@ struct ieee80211_txq_params {
/* from net/wireless.h */
struct wiphy;
-/* from net/ieee80211.h */
-struct ieee80211_channel;
+/**
+ * DOC: Scanning and BSS list handling
+ *
+ * The scanning process itself is fairly simple, but cfg80211 offers quite
+ * a bit of helper functionality. To start a scan, the scan operation will
+ * be invoked with a scan definition. This scan definition contains the
+ * channels to scan, and the SSIDs to send probe requests for (including the
+ * wildcard, if desired). A passive scan is indicated by having no SSIDs to
+ * probe. Additionally, a scan request may contain extra information elements
+ * that should be added to the probe request. The IEs are guaranteed to be
+ * well-formed, and will not exceed the maximum length the driver advertised
+ * in the wiphy structure.
+ *
+ * When scanning finds a BSS, cfg80211 needs to be notified of that, because
+ * it is responsible for maintaining the BSS list; the driver should not
+ * maintain a list itself. For this notification, various functions exist.
+ *
+ * Since drivers do not maintain a BSS list, there are also a number of
+ * functions to search for a BSS and obtain information about it from the
+ * BSS structure cfg80211 maintains. The BSS list is also made available
+ * to userspace.
+ */
/**
* struct cfg80211_ssid - SSID description
@@ -1020,7 +1092,7 @@ struct cfg80211_pmksa {
* @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
* This allows the operation to be terminated prior to timeout based on
* the duration value.
- * @action: Transmit an action frame
+ * @mgmt_tx: Transmit a management frame
*
* @testmode_cmd: run a test mode command
*
@@ -1172,7 +1244,7 @@ struct cfg80211_ops {
struct net_device *dev,
u64 cookie);
- int (*action)(struct wiphy *wiphy, struct net_device *dev,
+ int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
bool channel_type_valid,
@@ -1236,6 +1308,10 @@ struct mac_address {
u8 addr[ETH_ALEN];
};
+struct ieee80211_txrx_stypes {
+ u16 tx, rx;
+};
+
/**
* struct wiphy - wireless hardware description
* @reg_notifier: the driver's regulatory notification callback
@@ -1286,6 +1362,10 @@ struct mac_address {
* @privid: a pointer that drivers can use to identify if an arbitrary
* wiphy is theirs, e.g. in global notifiers
* @bands: information about bands/channels supported by this device
+ *
+ * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
+ * transmitted through nl80211, points to an array indexed by interface
+ * type
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -1294,9 +1374,12 @@ struct wiphy {
u8 perm_addr[ETH_ALEN];
u8 addr_mask[ETH_ALEN];
- u16 n_addresses;
struct mac_address *addresses;
+ const struct ieee80211_txrx_stypes *mgmt_stypes;
+
+ u16 n_addresses;
+
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
@@ -1492,8 +1575,8 @@ struct cfg80211_cached_keys;
* set by driver (if supported) on add_interface BEFORE registering the
* netdev and may otherwise be used by driver read-only, will be update
* by cfg80211 on change_interface
- * @action_registrations: list of registrations for action frames
- * @action_registrations_lock: lock for the list
+ * @mgmt_registrations: list of registrations for management frames
+ * @mgmt_registrations_lock: lock for the list
* @mtx: mutex used to lock data in this struct
* @cleanup_work: work struct used for cleanup that can't be done directly
*/
@@ -1505,8 +1588,8 @@ struct wireless_dev {
struct list_head list;
struct net_device *netdev;
- struct list_head action_registrations;
- spinlock_t action_registrations_lock;
+ struct list_head mgmt_registrations;
+ spinlock_t mgmt_registrations_lock;
struct mutex mtx;
@@ -1563,8 +1646,10 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
return wiphy_priv(wdev->wiphy);
}
-/*
- * Utility functions
+/**
+ * DOC: Utility functions
+ *
+ * cfg80211 offers a number of utility functions that can be useful.
*/
/**
@@ -1715,7 +1800,15 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
* ieee80211_hdrlen - get header length in bytes from frame control
* @fc: frame control field in little-endian format
*/
-unsigned int ieee80211_hdrlen(__le16 fc);
+unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
+
+/**
+ * DOC: Data path helpers
+ *
+ * In addition to generic utilities, cfg80211 also offers
+ * functions that help implement the data path for devices
+ * that do not do the 802.11/802.3 conversion on the device.
+ */
/**
* ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
@@ -1777,8 +1870,10 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb);
*/
const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
-/*
- * Regulatory helper functions for wiphys
+/**
+ * DOC: Regulatory enforcement infrastructure
+ *
+ * TODO
*/
/**
@@ -2181,6 +2276,20 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
/**
+ * DOC: RFkill integration
+ *
+ * RFkill integration in cfg80211 is almost invisible to drivers,
+ * as cfg80211 automatically registers an rfkill instance for each
+ * wireless device it knows about. Soft kill is also translated
+ * into disconnecting and turning all interfaces off, drivers are
+ * expected to turn off the device when all interfaces are down.
+ *
+ * However, devices may have a hard RFkill line, in which case they
+ * also need to interact with the rfkill subsystem, via cfg80211.
+ * They can do this with a few helper functions documented here.
+ */
+
+/**
* wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
* @wiphy: the wiphy
* @blocked: block status
@@ -2201,6 +2310,17 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
#ifdef CONFIG_NL80211_TESTMODE
/**
+ * DOC: Test mode
+ *
+ * Test mode is a set of utility functions to allow drivers to
+ * interact with driver-specific tools to aid, for instance,
+ * factory programming.
+ *
+ * This chapter describes how drivers interact with it, for more
+ * information see the nl80211 book's chapter on it.
+ */
+
+/**
* cfg80211_testmode_alloc_reply_skb - allocate testmode reply
* @wiphy: the wiphy
* @approxlen: an upper bound of the length of the data that will
@@ -2373,38 +2493,39 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp);
/**
- * cfg80211_rx_action - notification of received, unprocessed Action frame
+ * cfg80211_rx_mgmt - notification of received, unprocessed management frame
* @dev: network device
* @freq: Frequency on which the frame was received in MHz
- * @buf: Action frame (header + body)
+ * @buf: Management frame (header + body)
* @len: length of the frame data
* @gfp: context flags
- * Returns %true if a user space application is responsible for rejecting the
- * unrecognized Action frame; %false if no such application is registered
- * (i.e., the driver is responsible for rejecting the unrecognized Action
- * frame)
+ *
+ * Returns %true if a user space application has registered for this frame.
+ * For action frames, that makes it responsible for rejecting unrecognized
+ * action frames; %false otherwise, in which case for action frames the
+ * driver is responsible for rejecting the frame.
*
* This function is called whenever an Action frame is received for a station
* mode interface, but is not processed in kernel.
*/
-bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp);
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
+ size_t len, gfp_t gfp);
/**
- * cfg80211_action_tx_status - notification of TX status for Action frame
+ * cfg80211_mgmt_tx_status - notification of TX status for management frame
* @dev: network device
- * @cookie: Cookie returned by cfg80211_ops::action()
- * @buf: Action frame (header + body)
+ * @cookie: Cookie returned by cfg80211_ops::mgmt_tx()
+ * @buf: Management frame (header + body)
* @len: length of the frame data
* @ack: Whether frame was acknowledged
* @gfp: context flags
*
- * This function is called whenever an Action frame was requested to be
- * transmitted with cfg80211_ops::action() to report the TX status of the
+ * This function is called whenever a management frame was requested to be
+ * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the
* transmission attempt.
*/
-void cfg80211_action_tx_status(struct net_device *dev, u64 cookie,
- const u8 *buf, size_t len, bool ack, gfp_t gfp);
+void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
+ const u8 *buf, size_t len, bool ack, gfp_t gfp);
/**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b0787a1dea9..2a181136607 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -149,6 +149,7 @@ struct ieee80211_low_level_stats {
* @BSS_CHANGED_ARP_FILTER: Hardware ARP filter address list or state changed.
* @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note
* that it is only ever disabled for station mode.
+ * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -165,6 +166,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_IBSS = 1<<11,
BSS_CHANGED_ARP_FILTER = 1<<12,
BSS_CHANGED_QOS = 1<<13,
+ BSS_CHANGED_IDLE = 1<<14,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -223,6 +225,9 @@ enum ieee80211_bss_change {
* hardware must not perform any ARP filtering. Note, that the filter will
* be enabled also in promiscuous mode.
* @qos: This is a QoS-enabled BSS.
+ * @idle: This interface is idle. There's also a global idle flag in the
+ * hardware config which may be more appropriate depending on what
+ * your driver/device needs to do.
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -247,6 +252,7 @@ struct ieee80211_bss_conf {
u8 arp_addr_cnt;
bool arp_filter_enabled;
bool qos;
+ bool idle;
};
/**
@@ -783,20 +789,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
}
/**
- * enum ieee80211_key_alg - key algorithm
- * @ALG_WEP: WEP40 or WEP104
- * @ALG_TKIP: TKIP
- * @ALG_CCMP: CCMP (AES)
- * @ALG_AES_CMAC: AES-128-CMAC
- */
-enum ieee80211_key_alg {
- ALG_WEP,
- ALG_TKIP,
- ALG_CCMP,
- ALG_AES_CMAC,
-};
-
-/**
* enum ieee80211_key_flags - key flags
*
* These flags are used for communication about keys between the driver
@@ -833,7 +825,7 @@ enum ieee80211_key_flags {
* @hw_key_idx: To be set by the driver, this is the key index the driver
* wants to be given when a frame is transmitted and needs to be
* encrypted in hardware.
- * @alg: The key algorithm.
+ * @cipher: The key's cipher suite selector.
* @flags: key flags, see &enum ieee80211_key_flags.
* @keyidx: the key index (0-3)
* @keylen: key material length
@@ -846,7 +838,7 @@ enum ieee80211_key_flags {
* @iv_len: The IV length for this key type
*/
struct ieee80211_key_conf {
- enum ieee80211_key_alg alg;
+ u32 cipher;
u8 icv_len;
u8 iv_len;
u8 hw_key_idx;
@@ -1102,6 +1094,10 @@ enum ieee80211_hw_flags {
*
* @max_rates: maximum number of alternate rate retry stages
* @max_rate_tries: maximum number of tries for each stage
+ *
+ * @napi_weight: weight used for NAPI polling. You must specify an
+ * appropriate value here if a napi_poll operation is provided
+ * by your driver.
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
@@ -1113,6 +1109,7 @@ struct ieee80211_hw {
int channel_change_time;
int vif_data_size;
int sta_data_size;
+ int napi_weight;
u16 queues;
u16 max_listen_interval;
s8 max_signal;
@@ -1687,6 +1684,8 @@ enum ieee80211_ampdu_mlme_action {
* switch operation for CSAs received from the AP may implement this
* callback. They must then call ieee80211_chswitch_done() to indicate
* completion of the channel switch.
+ *
+ * @napi_poll: Poll Rx queue for incoming data frames.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1752,6 +1751,7 @@ struct ieee80211_ops {
void (*flush)(struct ieee80211_hw *hw, bool drop);
void (*channel_switch)(struct ieee80211_hw *hw,
struct ieee80211_channel_switch *ch_switch);
+ int (*napi_poll)(struct ieee80211_hw *hw, int budget);
};
/**
@@ -1897,6 +1897,22 @@ void ieee80211_free_hw(struct ieee80211_hw *hw);
*/
void ieee80211_restart_hw(struct ieee80211_hw *hw);
+/** ieee80211_napi_schedule - schedule NAPI poll
+ *
+ * Use this function to schedule NAPI polling on a device.
+ *
+ * @hw: the hardware to start polling
+ */
+void ieee80211_napi_schedule(struct ieee80211_hw *hw);
+
+/** ieee80211_napi_complete - complete NAPI polling
+ *
+ * Use this function to finish NAPI polling on a device.
+ *
+ * @hw: the hardware to stop polling
+ */
+void ieee80211_napi_complete(struct ieee80211_hw *hw);
+
/**
* ieee80211_rx - receive frame
*
@@ -2518,6 +2534,18 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
*/
void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success);
+/**
+ * ieee80211_request_smps - request SM PS transition
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @smps_mode: new SM PS mode
+ *
+ * This allows the driver to request an SM PS transition in managed
+ * mode. This is useful when the driver has more information than
+ * the stack about possible interference, for example by bluetooth.
+ */
+void ieee80211_request_smps(struct ieee80211_vif *vif,
+ enum ieee80211_smps_mode smps_mode);
+
/* Rate control API */
/**