diff options
| author | Kevin Liu <kliu5@marvell.com> | 2013-01-31 11:31:37 +0800 |
|---|---|---|
| committer | Chris Ball <cjb@laptop.org> | 2013-02-24 14:37:11 -0500 |
| commit | 52983382c74f59a3953e622d7661a24e1bc4388a (patch) | |
| tree | d5cfafd53be0b85a8921e28e22f1be64615d18fb /include | |
| parent | 073350f7b562d06df0aedd36c963508e36437b3c (diff) | |
mmc: sdhci: enhance preset value function
4d55c5a1 ("mmc: sdhci: enable preset value after uhs initialization")
added preset value support and enabled it by default during sd card init.
Below are the enhancements introduced by this patch:
1. In current code, preset value is enabled after setting clock finished,
which means the clock is manually set by driver firstly and then suddenly
switched to preset value at this point. So the first setting is useless
and unnecessary. What's more, the first clock setting may differ from the
preset one. The better way is enable preset value just after switch to
UHS mode so the preset value can take effect immediately. So move preset
value enable from mmc_sd_init_card to sdhci_set_ios which will be called
during set timing.
2. In current code, preset value is disabled at the beginning of
mmc_attach_sd. It's too late since low freq (400khz) should be set in
mmc_power_up. So move preset value disable to sdhci_set_ios which will
be called during power up.
3. host->clock and ios->drv_type should also be updated according to the
preset value if it's enabled. Current code missed this.
4. This patch also introduce a quirk to disable preset value in case
preset value doesn't work.
This patch has been verified on sdhci-pxav3 platform with both preset
enabled and disabled.
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mmc/host.h | 1 | ||||
| -rw-r--r-- | include/linux/mmc/sdhci.h | 1 |
2 files changed, 1 insertions, 1 deletions
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 0373b0a6daa..6c235e03de2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -136,7 +136,6 @@ struct mmc_host_ops { /* The tuning command opcode value is different for SD and eMMC cards */ int (*execute_tuning)(struct mmc_host *host, u32 opcode); - void (*enable_preset_value)(struct mmc_host *host, bool enable); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); void (*card_event)(struct mmc_host *host); diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 4bbc3301fbb..b838ffc49e4 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -94,6 +94,7 @@ struct sdhci_host { #define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) /* The system physically doesn't support 1.8v, even if the host does */ #define SDHCI_QUIRK2_NO_1_8_V (1<<2) +#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ |