Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

5 files changed, 56 insertions, 31 deletions

diff --git a/init/Kconfig b/init/Kconfig
index 54c655ce9c0..d95ca7cd5d4 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -115,10 +115,13 @@ config HAVE_KERNEL_BZIP2
 config HAVE_KERNEL_LZMA
 	bool
 
+config HAVE_KERNEL_LZO
+	bool
+
 choice
 	prompt "Kernel compression mode"
 	default KERNEL_GZIP
-	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
+	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO
 	help
 	  The linux kernel is a kind of self-extracting executable.
 	  Several compression algorithms are available, which differ
@@ -141,9 +144,8 @@ config KERNEL_GZIP
 	bool "Gzip"
 	depends on HAVE_KERNEL_GZIP
 	help
-	  The old and tried gzip compression. Its compression ratio is
-	  the poorest among the 3 choices; however its speed (both
-	  compression and decompression) is the fastest.
+	  The old and tried gzip compression. It provides a good balance
+	  between compression ratio and decompression speed.
 
 config KERNEL_BZIP2
 	bool "Bzip2"
@@ -164,6 +166,14 @@ config KERNEL_LZMA
 	  two. Compression is slowest.	The kernel size is about 33%
 	  smaller with LZMA in comparison to gzip.
 
+config KERNEL_LZO
+	bool "LZO"
+	depends on HAVE_KERNEL_LZO
+	help
+	  Its compression ratio is the poorest among the 4. The kernel
+	  size is about about 10% bigger than gzip; however its speed
+	  (both compression and decompression) is the fastest.
+
 endchoice
 
 config SWAP
@@ -1079,6 +1089,28 @@ config SLOB
 
 endchoice
 
+config MMAP_ALLOW_UNINITIALIZED
+	bool "Allow mmapped anonymous memory to be uninitialized"
+	depends on EMBEDDED && !MMU
+	default n
+	help
+	  Normally, and according to the Linux spec, anonymous memory obtained
+	  from mmap() has it's contents cleared before it is passed to
+	  userspace.  Enabling this config option allows you to request that
+	  mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
+	  providing a huge performance boost.  If this option is not enabled,
+	  then the flag will be ignored.
+
+	  This is taken advantage of by uClibc's malloc(), and also by
+	  ELF-FDPIC binfmt's brk and stack allocator.
+
+	  Because of the obvious security issues, this option should only be
+	  enabled on embedded devices where you control what is run in
+	  userspace.  Since that isn't generally a problem on no-MMU systems,
+	  it is normally safe to say Y here.
+
+	  See Documentation/nommu-mmap.txt for more information.
+
 config PROFILING
 	bool "Profiling support (EXPERIMENTAL)"
 	help
diff --git a/init/Makefile b/init/Makefile
index 4a243df426f..0bf677aa087 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -15,12 +15,8 @@ mounts-$(CONFIG_BLK_DEV_RAM)	+= do_mounts_rd.o
 mounts-$(CONFIG_BLK_DEV_INITRD)	+= do_mounts_initrd.o
 mounts-$(CONFIG_BLK_DEV_MD)	+= do_mounts_md.o
 
-# files to be removed upon make clean
-clean-files := ../include/linux/compile.h
-
 # dependencies on generated files need to be listed explicitly
-
-$(obj)/version.o: include/linux/compile.h
+$(obj)/version.o: include/generated/compile.h
 
 # compile.h changes depending on hostname, generation number, etc,
 # so we regenerate it always.
@@ -30,7 +26,7 @@ $(obj)/version.o: include/linux/compile.h
        chk_compile.h = :
  quiet_chk_compile.h = echo '  CHK     $@'
 silent_chk_compile.h = :
-include/linux/compile.h: FORCE
+include/generated/compile.h: FORCE
 	@$($(quiet)chk_compile.h)
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
 	"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(KBUILD_CFLAGS)"
diff --git a/init/initramfs.c b/init/initramfs.c
index 4c00edc5968..b37d34beb90 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -413,7 +413,7 @@ static unsigned my_inptr;   /* index of next byte to be processed in inbuf */
 
 static char * __init unpack_to_rootfs(char *buf, unsigned len)
 {
-	int written;
+	int written, res;
 	decompress_fn decompress;
 	const char *compress_name;
 	static __initdata char msg_buf[64];
@@ -445,10 +445,12 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len)
 		}
 		this_header = 0;
 		decompress = decompress_method(buf, len, &compress_name);
-		if (decompress)
-			decompress(buf, len, NULL, flush_buffer, NULL,
+		if (decompress) {
+			res = decompress(buf, len, NULL, flush_buffer, NULL,
 				   &my_inptr, error);
-		else if (compress_name) {
+			if (res)
+				error("decompressor failed");
+		} else if (compress_name) {
 			if (!message) {
 				snprintf(msg_buf, sizeof msg_buf,
 					 "compression method %s not configured",
diff --git a/init/main.c b/init/main.c
index 4051d75dd2d..dac44a9356a 100644
--- a/init/main.c
+++ b/init/main.c
@@ -369,12 +369,6 @@ static void __init smp_init(void)
 {
 	unsigned int cpu;
 
-	/*
-	 * Set up the current CPU as possible to migrate to.
-	 * The other ones will be done by cpu_up/cpu_down()
-	 */
-	set_cpu_active(smp_processor_id(), true);
-
 	/* FIXME: This should be done in userspace --RR */
 	for_each_present_cpu(cpu) {
 		if (num_online_cpus() >= setup_max_cpus)
@@ -486,6 +480,7 @@ static void __init boot_cpu_init(void)
 	int cpu = smp_processor_id();
 	/* Mark the boot cpu "present", "online" etc for SMP and UP case */
 	set_cpu_online(cpu, true);
+	set_cpu_active(cpu, true);
 	set_cpu_present(cpu, true);
 	set_cpu_possible(cpu, true);
 }
@@ -691,10 +686,10 @@ asmlinkage void __init start_kernel(void)
 static void __init do_ctors(void)
 {
 #ifdef CONFIG_CONSTRUCTORS
-	ctor_fn_t *call = (ctor_fn_t *) __ctors_start;
+	ctor_fn_t *fn = (ctor_fn_t *) __ctors_start;
 
-	for (; call < (ctor_fn_t *) __ctors_end; call++)
-		(*call)();
+	for (; fn < (ctor_fn_t *) __ctors_end; fn++)
+		(*fn)();
 #endif
 }
 
@@ -755,10 +750,10 @@ extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];
 
 static void __init do_initcalls(void)
 {
-	initcall_t *call;
+	initcall_t *fn;
 
-	for (call = __early_initcall_end; call < __initcall_end; call++)
-		do_one_initcall(*call);
+	for (fn = __early_initcall_end; fn < __initcall_end; fn++)
+		do_one_initcall(*fn);
 
 	/* Make sure there is no pending stuff from the initcall sequence */
 	flush_scheduled_work();
@@ -785,10 +780,10 @@ static void __init do_basic_setup(void)
 
 static void __init do_pre_smp_initcalls(void)
 {
-	initcall_t *call;
+	initcall_t *fn;
 
-	for (call = __initcall_start; call < __early_initcall_end; call++)
-		do_one_initcall(*call);
+	for (fn = __initcall_start; fn < __early_initcall_end; fn++)
+		do_one_initcall(*fn);
 }
 
 static void run_init_process(char *init_filename)
diff --git a/init/version.c b/init/version.c
index 52a8b98642b..adff586401a 100644
--- a/init/version.c
+++ b/init/version.c
@@ -6,11 +6,11 @@
  *  May be freely distributed as part of Linux.
  */
 
-#include <linux/compile.h>
+#include <generated/compile.h>
 #include <linux/module.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
-#include <linux/utsrelease.h>
+#include <generated/utsrelease.h>
 #include <linux/version.h>
 
 #ifndef CONFIG_KALLSYMS